1 /* 2 * (C) Copyright 2002 3 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 4 * Marius Groeger <mgroeger@sysgo.de> 5 * 6 * (C) Copyright 2002 7 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 8 * Alex Zuepke <azu@sysgo.de> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #include <asm/io.h> 14 #include <asm/system.h> 15 #include <command.h> 16 #include <common.h> 17 #include <asm/arch/pxa-regs.h> 18 19 /* Flush I/D-cache */ 20 static void cache_flush(void) 21 { 22 unsigned long i = 0; 23 24 asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i)); 25 } 26 27 int cleanup_before_linux(void) 28 { 29 /* 30 * This function is called just before we call Linux. It prepares 31 * the processor for Linux by just disabling everything that can 32 * disturb booting Linux. 33 */ 34 35 disable_interrupts(); 36 icache_disable(); 37 dcache_disable(); 38 cache_flush(); 39 40 return 0; 41 } 42 43 void pxa_wait_ticks(int ticks) 44 { 45 writel(0, OSCR); 46 while (readl(OSCR) < ticks) 47 asm volatile("" : : : "memory"); 48 } 49 50 inline void writelrb(uint32_t val, uint32_t addr) 51 { 52 writel(val, addr); 53 asm volatile("" : : : "memory"); 54 readl(addr); 55 asm volatile("" : : : "memory"); 56 } 57 58 void pxa2xx_dram_init(void) 59 { 60 uint32_t tmp; 61 int i; 62 /* 63 * 1) Initialize Asynchronous static memory controller 64 */ 65 66 writelrb(CONFIG_SYS_MSC0_VAL, MSC0); 67 writelrb(CONFIG_SYS_MSC1_VAL, MSC1); 68 writelrb(CONFIG_SYS_MSC2_VAL, MSC2); 69 /* 70 * 2) Initialize Card Interface 71 */ 72 73 /* MECR: Memory Expansion Card Register */ 74 writelrb(CONFIG_SYS_MECR_VAL, MECR); 75 /* MCMEM0: Card Interface slot 0 timing */ 76 writelrb(CONFIG_SYS_MCMEM0_VAL, MCMEM0); 77 /* MCMEM1: Card Interface slot 1 timing */ 78 writelrb(CONFIG_SYS_MCMEM1_VAL, MCMEM1); 79 /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ 80 writelrb(CONFIG_SYS_MCATT0_VAL, MCATT0); 81 /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ 82 writelrb(CONFIG_SYS_MCATT1_VAL, MCATT1); 83 /* MCIO0: Card Interface I/O Space Timing, slot 0 */ 84 writelrb(CONFIG_SYS_MCIO0_VAL, MCIO0); 85 /* MCIO1: Card Interface I/O Space Timing, slot 1 */ 86 writelrb(CONFIG_SYS_MCIO1_VAL, MCIO1); 87 88 /* 89 * 3) Configure Fly-By DMA register 90 */ 91 92 writelrb(CONFIG_SYS_FLYCNFG_VAL, FLYCNFG); 93 94 /* 95 * 4) Initialize Timing for Sync Memory (SDCLK0) 96 */ 97 98 /* 99 * Before accessing MDREFR we need a valid DRI field, so we set 100 * this to power on defaults + DRI field. 101 */ 102 103 /* Read current MDREFR config and zero out DRI */ 104 tmp = readl(MDREFR) & ~0xfff; 105 /* Add user-specified DRI */ 106 tmp |= CONFIG_SYS_MDREFR_VAL & 0xfff; 107 /* Configure important bits */ 108 tmp |= MDREFR_K0RUN | MDREFR_SLFRSH; 109 tmp &= ~(MDREFR_APD | MDREFR_E1PIN); 110 111 /* Write MDREFR back */ 112 writelrb(tmp, MDREFR); 113 114 /* 115 * 5) Initialize Synchronous Static Memory (Flash/Peripherals) 116 */ 117 118 /* Initialize SXCNFG register. Assert the enable bits. 119 * 120 * Write SXMRS to cause an MRS command to all enabled banks of 121 * synchronous static memory. Note that SXLCR need not be written 122 * at this time. 123 */ 124 writelrb(CONFIG_SYS_SXCNFG_VAL, SXCNFG); 125 126 /* 127 * 6) Initialize SDRAM 128 */ 129 130 writelrb(CONFIG_SYS_MDREFR_VAL & ~MDREFR_SLFRSH, MDREFR); 131 writelrb(CONFIG_SYS_MDREFR_VAL | MDREFR_E1PIN, MDREFR); 132 133 /* 134 * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure 135 * but not enable each SDRAM partition pair. 136 */ 137 138 writelrb(CONFIG_SYS_MDCNFG_VAL & 139 ~(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3), MDCNFG); 140 /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ 141 pxa_wait_ticks(0x300); 142 143 /* 144 * 8) Trigger a number (usually 8) refresh cycles by attempting 145 * non-burst read or write accesses to disabled SDRAM, as commonly 146 * specified in the power up sequence documented in SDRAM data 147 * sheets. The address(es) used for this purpose must not be 148 * cacheable. 149 */ 150 for (i = 9; i >= 0; i--) { 151 writel(i, 0xa0000000); 152 asm volatile("" : : : "memory"); 153 } 154 /* 155 * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). 156 */ 157 158 tmp = CONFIG_SYS_MDCNFG_VAL & 159 (MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3); 160 tmp |= readl(MDCNFG); 161 writelrb(tmp, MDCNFG); 162 163 /* 164 * 10) Write MDMRS. 165 */ 166 167 writelrb(CONFIG_SYS_MDMRS_VAL, MDMRS); 168 169 /* 170 * 11) Enable APD 171 */ 172 173 if (CONFIG_SYS_MDREFR_VAL & MDREFR_APD) { 174 tmp = readl(MDREFR); 175 tmp |= MDREFR_APD; 176 writelrb(tmp, MDREFR); 177 } 178 } 179 180 void pxa_gpio_setup(void) 181 { 182 writel(CONFIG_SYS_GPSR0_VAL, GPSR0); 183 writel(CONFIG_SYS_GPSR1_VAL, GPSR1); 184 writel(CONFIG_SYS_GPSR2_VAL, GPSR2); 185 #if defined(CONFIG_CPU_PXA27X) 186 writel(CONFIG_SYS_GPSR3_VAL, GPSR3); 187 #endif 188 189 writel(CONFIG_SYS_GPCR0_VAL, GPCR0); 190 writel(CONFIG_SYS_GPCR1_VAL, GPCR1); 191 writel(CONFIG_SYS_GPCR2_VAL, GPCR2); 192 #if defined(CONFIG_CPU_PXA27X) 193 writel(CONFIG_SYS_GPCR3_VAL, GPCR3); 194 #endif 195 196 writel(CONFIG_SYS_GPDR0_VAL, GPDR0); 197 writel(CONFIG_SYS_GPDR1_VAL, GPDR1); 198 writel(CONFIG_SYS_GPDR2_VAL, GPDR2); 199 #if defined(CONFIG_CPU_PXA27X) 200 writel(CONFIG_SYS_GPDR3_VAL, GPDR3); 201 #endif 202 203 writel(CONFIG_SYS_GAFR0_L_VAL, GAFR0_L); 204 writel(CONFIG_SYS_GAFR0_U_VAL, GAFR0_U); 205 writel(CONFIG_SYS_GAFR1_L_VAL, GAFR1_L); 206 writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U); 207 writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L); 208 writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U); 209 #if defined(CONFIG_CPU_PXA27X) 210 writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L); 211 writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U); 212 #endif 213 214 writel(CONFIG_SYS_PSSR_VAL, PSSR); 215 } 216 217 void pxa_interrupt_setup(void) 218 { 219 writel(0, ICLR); 220 writel(0, ICMR); 221 #if defined(CONFIG_CPU_PXA27X) 222 writel(0, ICLR2); 223 writel(0, ICMR2); 224 #endif 225 } 226 227 void pxa_clock_setup(void) 228 { 229 writel(CONFIG_SYS_CKEN, CKEN); 230 writel(CONFIG_SYS_CCCR, CCCR); 231 asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(0x0b)); 232 233 /* enable the 32Khz oscillator for RTC and PowerManager */ 234 writel(OSCC_OON, OSCC); 235 while (!(readl(OSCC) & OSCC_OOK)) 236 asm volatile("" : : : "memory"); 237 } 238 239 void pxa_wakeup(void) 240 { 241 uint32_t rcsr; 242 243 rcsr = readl(RCSR); 244 writel(rcsr & (RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR), RCSR); 245 246 /* Wakeup */ 247 if (rcsr & RCSR_SMR) { 248 writel(PSSR_PH, PSSR); 249 pxa2xx_dram_init(); 250 icache_disable(); 251 dcache_disable(); 252 asm volatile("mov pc, %0" : : "r"(readl(PSPR))); 253 } 254 } 255 256 int arch_cpu_init(void) 257 { 258 pxa_gpio_setup(); 259 pxa_wakeup(); 260 pxa_interrupt_setup(); 261 pxa_clock_setup(); 262 return 0; 263 } 264 265 void i2c_clk_enable(void) 266 { 267 /* Set the global I2C clock on */ 268 writel(readl(CKEN) | CKEN14_I2C, CKEN); 269 } 270 271 void __attribute__((weak)) reset_cpu(ulong ignored) __attribute__((noreturn)); 272 273 void reset_cpu(ulong ignored) 274 { 275 uint32_t tmp; 276 277 setbits_le32(OWER, OWER_WME); 278 279 tmp = readl(OSCR); 280 tmp += 0x1000; 281 writel(tmp, OSMR3); 282 283 for (;;) 284 ; 285 } 286