1 /* 2 * Copyright 2014-2015 Freescale Semiconductor 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <fsl_immap.h> 9 #include <fsl_ifc.h> 10 #include <ahci.h> 11 #include <scsi.h> 12 #include <asm/arch/fsl_serdes.h> 13 #include <asm/arch/soc.h> 14 #include <asm/io.h> 15 #include <asm/global_data.h> 16 #include <asm/arch-fsl-layerscape/config.h> 17 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS 18 #include <fsl_csu.h> 19 #endif 20 #ifdef CONFIG_SYS_FSL_DDR 21 #include <fsl_ddr_sdram.h> 22 #include <fsl_ddr.h> 23 #endif 24 #ifdef CONFIG_CHAIN_OF_TRUST 25 #include <fsl_validate.h> 26 #endif 27 #include <fsl_immap.h> 28 29 DECLARE_GLOBAL_DATA_PTR; 30 31 bool soc_has_dp_ddr(void) 32 { 33 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 34 u32 svr = gur_in32(&gur->svr); 35 36 /* LS2085A, LS2088A, LS2048A has DP_DDR */ 37 if ((SVR_SOC_VER(svr) == SVR_LS2085A) || 38 (SVR_SOC_VER(svr) == SVR_LS2088A) || 39 (SVR_SOC_VER(svr) == SVR_LS2048A)) 40 return true; 41 42 return false; 43 } 44 45 bool soc_has_aiop(void) 46 { 47 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 48 u32 svr = gur_in32(&gur->svr); 49 50 /* LS2085A has AIOP */ 51 if (SVR_SOC_VER(svr) == SVR_LS2085A) 52 return true; 53 54 return false; 55 } 56 57 static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset) 58 { 59 scfg_clrsetbits32(scfg + offset / 4, 60 0xF << 6, 61 SCFG_USB_TXVREFTUNE << 6); 62 } 63 64 static void erratum_a009008(void) 65 { 66 #ifdef CONFIG_SYS_FSL_ERRATUM_A009008 67 u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; 68 69 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \ 70 defined(CONFIG_ARCH_LS1012A) 71 set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1); 72 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) 73 set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2); 74 set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB3); 75 #endif 76 #elif defined(CONFIG_ARCH_LS2080A) 77 set_usb_txvreftune(scfg, SCFG_USB3PRM1CR); 78 #endif 79 #endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */ 80 } 81 82 static inline void set_usb_sqrxtune(u32 __iomem *scfg, u32 offset) 83 { 84 scfg_clrbits32(scfg + offset / 4, 85 SCFG_USB_SQRXTUNE_MASK << 23); 86 } 87 88 static void erratum_a009798(void) 89 { 90 #ifdef CONFIG_SYS_FSL_ERRATUM_A009798 91 u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; 92 93 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \ 94 defined(CONFIG_ARCH_LS1012A) 95 set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB1); 96 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) 97 set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB2); 98 set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB3); 99 #endif 100 #elif defined(CONFIG_ARCH_LS2080A) 101 set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR); 102 #endif 103 #endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */ 104 } 105 106 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \ 107 defined(CONFIG_ARCH_LS1012A) 108 static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset) 109 { 110 scfg_clrsetbits32(scfg + offset / 4, 111 0x7F << 9, 112 SCFG_USB_PCSTXSWINGFULL << 9); 113 } 114 #endif 115 116 static void erratum_a008997(void) 117 { 118 #ifdef CONFIG_SYS_FSL_ERRATUM_A008997 119 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \ 120 defined(CONFIG_ARCH_LS1012A) 121 u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; 122 123 set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1); 124 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) 125 set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2); 126 set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3); 127 #endif 128 #endif 129 #endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */ 130 } 131 132 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \ 133 defined(CONFIG_ARCH_LS1012A) 134 135 #define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy) \ 136 out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \ 137 out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \ 138 out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \ 139 out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4) 140 141 #elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) 142 143 #define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy) \ 144 out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \ 145 out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \ 146 out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \ 147 out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4) 148 149 #endif 150 151 static void erratum_a009007(void) 152 { 153 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) || \ 154 defined(CONFIG_ARCH_LS1012A) 155 void __iomem *usb_phy = (void __iomem *)SCFG_USB_PHY1; 156 157 PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); 158 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) 159 usb_phy = (void __iomem *)SCFG_USB_PHY2; 160 PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); 161 162 usb_phy = (void __iomem *)SCFG_USB_PHY3; 163 PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); 164 #endif 165 #elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) 166 void __iomem *dcsr = (void __iomem *)DCSR_BASE; 167 168 PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY1); 169 PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY2); 170 #endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */ 171 } 172 173 #if defined(CONFIG_FSL_LSCH3) 174 /* 175 * This erratum requires setting a value to eddrtqcr1 to 176 * optimal the DDR performance. 177 */ 178 static void erratum_a008336(void) 179 { 180 #ifdef CONFIG_SYS_FSL_ERRATUM_A008336 181 u32 *eddrtqcr1; 182 183 #ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR 184 eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800; 185 if (fsl_ddr_get_version(0) == 0x50200) 186 out_le32(eddrtqcr1, 0x63b30002); 187 #endif 188 #ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR 189 eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800; 190 if (fsl_ddr_get_version(0) == 0x50200) 191 out_le32(eddrtqcr1, 0x63b30002); 192 #endif 193 #endif 194 } 195 196 /* 197 * This erratum requires a register write before being Memory 198 * controller 3 being enabled. 199 */ 200 static void erratum_a008514(void) 201 { 202 #ifdef CONFIG_SYS_FSL_ERRATUM_A008514 203 u32 *eddrtqcr1; 204 205 #ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR 206 eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800; 207 out_le32(eddrtqcr1, 0x63b20002); 208 #endif 209 #endif 210 } 211 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635 212 #define PLATFORM_CYCLE_ENV_VAR "a009635_interval_val" 213 214 static unsigned long get_internval_val_mhz(void) 215 { 216 char *interval = env_get(PLATFORM_CYCLE_ENV_VAR); 217 /* 218 * interval is the number of platform cycles(MHz) between 219 * wake up events generated by EPU. 220 */ 221 ulong interval_mhz = get_bus_freq(0) / (1000 * 1000); 222 223 if (interval) 224 interval_mhz = simple_strtoul(interval, NULL, 10); 225 226 return interval_mhz; 227 } 228 229 void erratum_a009635(void) 230 { 231 u32 val; 232 unsigned long interval_mhz = get_internval_val_mhz(); 233 234 if (!interval_mhz) 235 return; 236 237 val = in_le32(DCSR_CGACRE5); 238 writel(val | 0x00000200, DCSR_CGACRE5); 239 240 val = in_le32(EPU_EPCMPR5); 241 writel(interval_mhz, EPU_EPCMPR5); 242 val = in_le32(EPU_EPCCR5); 243 writel(val | 0x82820000, EPU_EPCCR5); 244 val = in_le32(EPU_EPSMCR5); 245 writel(val | 0x002f0000, EPU_EPSMCR5); 246 val = in_le32(EPU_EPECR5); 247 writel(val | 0x20000000, EPU_EPECR5); 248 val = in_le32(EPU_EPGCR); 249 writel(val | 0x80000000, EPU_EPGCR); 250 } 251 #endif /* CONFIG_SYS_FSL_ERRATUM_A009635 */ 252 253 static void erratum_rcw_src(void) 254 { 255 #if defined(CONFIG_SPL) && defined(CONFIG_NAND_BOOT) 256 u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; 257 u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE; 258 u32 val; 259 260 val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4); 261 val &= ~DCFG_PORSR1_RCW_SRC; 262 val |= DCFG_PORSR1_RCW_SRC_NOR; 263 out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val); 264 #endif 265 } 266 267 #define I2C_DEBUG_REG 0x6 268 #define I2C_GLITCH_EN 0x8 269 /* 270 * This erratum requires setting glitch_en bit to enable 271 * digital glitch filter to improve clock stability. 272 */ 273 #ifdef CONFIG_SYS_FSL_ERRATUM_A009203 274 static void erratum_a009203(void) 275 { 276 #ifdef CONFIG_SYS_I2C 277 u8 __iomem *ptr; 278 #ifdef I2C1_BASE_ADDR 279 ptr = (u8 __iomem *)(I2C1_BASE_ADDR + I2C_DEBUG_REG); 280 281 writeb(I2C_GLITCH_EN, ptr); 282 #endif 283 #ifdef I2C2_BASE_ADDR 284 ptr = (u8 __iomem *)(I2C2_BASE_ADDR + I2C_DEBUG_REG); 285 286 writeb(I2C_GLITCH_EN, ptr); 287 #endif 288 #ifdef I2C3_BASE_ADDR 289 ptr = (u8 __iomem *)(I2C3_BASE_ADDR + I2C_DEBUG_REG); 290 291 writeb(I2C_GLITCH_EN, ptr); 292 #endif 293 #ifdef I2C4_BASE_ADDR 294 ptr = (u8 __iomem *)(I2C4_BASE_ADDR + I2C_DEBUG_REG); 295 296 writeb(I2C_GLITCH_EN, ptr); 297 #endif 298 #endif 299 } 300 #endif 301 302 void bypass_smmu(void) 303 { 304 u32 val; 305 val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); 306 out_le32(SMMU_SCR0, val); 307 val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); 308 out_le32(SMMU_NSCR0, val); 309 } 310 void fsl_lsch3_early_init_f(void) 311 { 312 erratum_rcw_src(); 313 #ifdef CONFIG_FSL_IFC 314 init_early_memctl_regs(); /* tighten IFC timing */ 315 #endif 316 #ifdef CONFIG_SYS_FSL_ERRATUM_A009203 317 erratum_a009203(); 318 #endif 319 erratum_a008514(); 320 erratum_a008336(); 321 erratum_a009008(); 322 erratum_a009798(); 323 erratum_a008997(); 324 erratum_a009007(); 325 #ifdef CONFIG_CHAIN_OF_TRUST 326 /* In case of Secure Boot, the IBR configures the SMMU 327 * to allow only Secure transactions. 328 * SMMU must be reset in bypass mode. 329 * Set the ClientPD bit and Clear the USFCFG Bit 330 */ 331 if (fsl_check_boot_mode_secure() == 1) 332 bypass_smmu(); 333 #endif 334 } 335 336 #ifdef CONFIG_SCSI_AHCI_PLAT 337 int sata_init(void) 338 { 339 struct ccsr_ahci __iomem *ccsr_ahci; 340 341 #ifdef CONFIG_SYS_SATA2 342 ccsr_ahci = (void *)CONFIG_SYS_SATA2; 343 out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); 344 out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); 345 out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); 346 #endif 347 348 #ifdef CONFIG_SYS_SATA1 349 ccsr_ahci = (void *)CONFIG_SYS_SATA1; 350 out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); 351 out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); 352 out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); 353 354 ahci_init((void __iomem *)CONFIG_SYS_SATA1); 355 scsi_scan(false); 356 #endif 357 358 return 0; 359 } 360 #endif 361 362 #elif defined(CONFIG_FSL_LSCH2) 363 #ifdef CONFIG_SCSI_AHCI_PLAT 364 int sata_init(void) 365 { 366 struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA; 367 368 /* Disable SATA ECC */ 369 out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000); 370 out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); 371 out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); 372 out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); 373 374 ahci_init((void __iomem *)CONFIG_SYS_SATA); 375 scsi_scan(false); 376 377 return 0; 378 } 379 #endif 380 381 static void erratum_a009929(void) 382 { 383 #ifdef CONFIG_SYS_FSL_ERRATUM_A009929 384 struct ccsr_gur *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; 385 u32 __iomem *dcsr_cop_ccp = (void *)CONFIG_SYS_DCSR_COP_CCP_ADDR; 386 u32 rstrqmr1 = gur_in32(&gur->rstrqmr1); 387 388 rstrqmr1 |= 0x00000400; 389 gur_out32(&gur->rstrqmr1, rstrqmr1); 390 writel(0x01000000, dcsr_cop_ccp); 391 #endif 392 } 393 394 /* 395 * This erratum requires setting a value to eddrtqcr1 to optimal 396 * the DDR performance. The eddrtqcr1 register is in SCFG space 397 * of LS1043A and the offset is 0x157_020c. 398 */ 399 #if defined(CONFIG_SYS_FSL_ERRATUM_A009660) \ 400 && defined(CONFIG_SYS_FSL_ERRATUM_A008514) 401 #error A009660 and A008514 can not be both enabled. 402 #endif 403 404 static void erratum_a009660(void) 405 { 406 #ifdef CONFIG_SYS_FSL_ERRATUM_A009660 407 u32 *eddrtqcr1 = (void *)CONFIG_SYS_FSL_SCFG_ADDR + 0x20c; 408 out_be32(eddrtqcr1, 0x63b20042); 409 #endif 410 } 411 412 static void erratum_a008850_early(void) 413 { 414 #ifdef CONFIG_SYS_FSL_ERRATUM_A008850 415 /* part 1 of 2 */ 416 struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + 417 CONFIG_SYS_CCI400_OFFSET); 418 struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; 419 420 /* Skip if running at lower exception level */ 421 if (current_el() < 3) 422 return; 423 424 /* disables propagation of barrier transactions to DDRC from CCI400 */ 425 out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); 426 427 /* disable the re-ordering in DDRC */ 428 ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); 429 #endif 430 } 431 432 void erratum_a008850_post(void) 433 { 434 #ifdef CONFIG_SYS_FSL_ERRATUM_A008850 435 /* part 2 of 2 */ 436 struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + 437 CONFIG_SYS_CCI400_OFFSET); 438 struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; 439 u32 tmp; 440 441 /* Skip if running at lower exception level */ 442 if (current_el() < 3) 443 return; 444 445 /* enable propagation of barrier transactions to DDRC from CCI400 */ 446 out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); 447 448 /* enable the re-ordering in DDRC */ 449 tmp = ddr_in32(&ddr->eor); 450 tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); 451 ddr_out32(&ddr->eor, tmp); 452 #endif 453 } 454 455 #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 456 void erratum_a010315(void) 457 { 458 int i; 459 460 for (i = PCIE1; i <= PCIE4; i++) 461 if (!is_serdes_configured(i)) { 462 debug("PCIe%d: disabled all R/W permission!\n", i); 463 set_pcie_ns_access(i, 0); 464 } 465 } 466 #endif 467 468 static void erratum_a010539(void) 469 { 470 #if defined(CONFIG_SYS_FSL_ERRATUM_A010539) && defined(CONFIG_QSPI_BOOT) 471 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 472 u32 porsr1; 473 474 porsr1 = in_be32(&gur->porsr1); 475 porsr1 &= ~FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK; 476 out_be32((void *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), 477 porsr1); 478 #endif 479 } 480 481 /* Get VDD in the unit mV from voltage ID */ 482 int get_core_volt_from_fuse(void) 483 { 484 struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 485 int vdd; 486 u32 fusesr; 487 u8 vid; 488 489 fusesr = in_be32(&gur->dcfg_fusesr); 490 debug("%s: fusesr = 0x%x\n", __func__, fusesr); 491 vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) & 492 FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK; 493 if ((vid == 0) || (vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK)) { 494 vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) & 495 FSL_CHASSIS2_DCFG_FUSESR_VID_MASK; 496 } 497 debug("%s: VID = 0x%x\n", __func__, vid); 498 switch (vid) { 499 case 0x00: /* VID isn't supported */ 500 vdd = -EINVAL; 501 debug("%s: The VID feature is not supported\n", __func__); 502 break; 503 case 0x08: /* 0.9V silicon */ 504 vdd = 900; 505 break; 506 case 0x10: /* 1.0V silicon */ 507 vdd = 1000; 508 break; 509 default: /* Other core voltage */ 510 vdd = -EINVAL; 511 printf("%s: The VID(%x) isn't supported\n", __func__, vid); 512 break; 513 } 514 debug("%s: The required minimum volt of CORE is %dmV\n", __func__, vdd); 515 516 return vdd; 517 } 518 519 __weak int board_switch_core_volt(u32 vdd) 520 { 521 return 0; 522 } 523 524 static int setup_core_volt(u32 vdd) 525 { 526 return board_setup_core_volt(vdd); 527 } 528 529 #ifdef CONFIG_SYS_FSL_DDR 530 static void ddr_enable_0v9_volt(bool en) 531 { 532 struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; 533 u32 tmp; 534 535 tmp = ddr_in32(&ddr->ddr_cdr1); 536 537 if (en) 538 tmp |= DDR_CDR1_V0PT9_EN; 539 else 540 tmp &= ~DDR_CDR1_V0PT9_EN; 541 542 ddr_out32(&ddr->ddr_cdr1, tmp); 543 } 544 #endif 545 546 int setup_chip_volt(void) 547 { 548 int vdd; 549 550 vdd = get_core_volt_from_fuse(); 551 /* Nothing to do for silicons doesn't support VID */ 552 if (vdd < 0) 553 return vdd; 554 555 if (setup_core_volt(vdd)) 556 printf("%s: Switch core VDD to %dmV failed\n", __func__, vdd); 557 #ifdef CONFIG_SYS_HAS_SERDES 558 if (setup_serdes_volt(vdd)) 559 printf("%s: Switch SVDD to %dmV failed\n", __func__, vdd); 560 #endif 561 562 #ifdef CONFIG_SYS_FSL_DDR 563 if (vdd == 900) 564 ddr_enable_0v9_volt(true); 565 #endif 566 567 return 0; 568 } 569 570 void fsl_lsch2_early_init_f(void) 571 { 572 struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + 573 CONFIG_SYS_CCI400_OFFSET); 574 struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; 575 576 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS 577 enable_layerscape_ns_access(); 578 #endif 579 580 #ifdef CONFIG_FSL_IFC 581 init_early_memctl_regs(); /* tighten IFC timing */ 582 #endif 583 584 #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT) 585 out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); 586 #endif 587 /* Make SEC reads and writes snoopable */ 588 setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | 589 SCFG_SNPCNFGCR_SECWRSNP | 590 SCFG_SNPCNFGCR_SATARDSNP | 591 SCFG_SNPCNFGCR_SATAWRSNP); 592 593 /* 594 * Enable snoop requests and DVM message requests for 595 * Slave insterface S4 (A53 core cluster) 596 */ 597 if (current_el() == 3) { 598 out_le32(&cci->slave[4].snoop_ctrl, 599 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); 600 } 601 602 /* Erratum */ 603 erratum_a008850_early(); /* part 1 of 2 */ 604 erratum_a009929(); 605 erratum_a009660(); 606 erratum_a010539(); 607 erratum_a009008(); 608 erratum_a009798(); 609 erratum_a008997(); 610 erratum_a009007(); 611 } 612 #endif 613 614 #ifdef CONFIG_QSPI_AHB_INIT 615 /* Enable 4bytes address support and fast read */ 616 int qspi_ahb_init(void) 617 { 618 u32 *qspi_lut, lut_key, *qspi_key; 619 620 qspi_key = (void *)SYS_FSL_QSPI_ADDR + 0x300; 621 qspi_lut = (void *)SYS_FSL_QSPI_ADDR + 0x310; 622 623 lut_key = in_be32(qspi_key); 624 625 if (lut_key == 0x5af05af0) { 626 /* That means the register is BE */ 627 out_be32(qspi_key, 0x5af05af0); 628 /* Unlock the lut table */ 629 out_be32(qspi_key + 1, 0x00000002); 630 out_be32(qspi_lut, 0x0820040c); 631 out_be32(qspi_lut + 1, 0x1c080c08); 632 out_be32(qspi_lut + 2, 0x00002400); 633 /* Lock the lut table */ 634 out_be32(qspi_key, 0x5af05af0); 635 out_be32(qspi_key + 1, 0x00000001); 636 } else { 637 /* That means the register is LE */ 638 out_le32(qspi_key, 0x5af05af0); 639 /* Unlock the lut table */ 640 out_le32(qspi_key + 1, 0x00000002); 641 out_le32(qspi_lut, 0x0820040c); 642 out_le32(qspi_lut + 1, 0x1c080c08); 643 out_le32(qspi_lut + 2, 0x00002400); 644 /* Lock the lut table */ 645 out_le32(qspi_key, 0x5af05af0); 646 out_le32(qspi_key + 1, 0x00000001); 647 } 648 649 return 0; 650 } 651 #endif 652 653 #ifdef CONFIG_BOARD_LATE_INIT 654 int board_late_init(void) 655 { 656 #ifdef CONFIG_SCSI_AHCI_PLAT 657 sata_init(); 658 #endif 659 #ifdef CONFIG_CHAIN_OF_TRUST 660 fsl_setenv_chain_of_trust(); 661 #endif 662 #ifdef CONFIG_QSPI_AHB_INIT 663 qspi_ahb_init(); 664 #endif 665 666 return 0; 667 } 668 #endif 669