1 /* 2 * Copyright 2014-2015 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <asm/io.h> 9 #include <linux/errno.h> 10 #include <asm/system.h> 11 #include <asm/armv8/mmu.h> 12 #include <asm/io.h> 13 #include <asm/arch/fsl_serdes.h> 14 #include <asm/arch/soc.h> 15 #include <asm/arch/cpu.h> 16 #include <asm/arch/speed.h> 17 #ifdef CONFIG_MP 18 #include <asm/arch/mp.h> 19 #endif 20 #include <efi_loader.h> 21 #include <fm_eth.h> 22 #include <fsl-mc/fsl_mc.h> 23 #ifdef CONFIG_FSL_ESDHC 24 #include <fsl_esdhc.h> 25 #endif 26 #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT 27 #include <asm/armv8/sec_firmware.h> 28 #endif 29 #ifdef CONFIG_SYS_FSL_DDR 30 #include <fsl_ddr.h> 31 #endif 32 33 DECLARE_GLOBAL_DATA_PTR; 34 35 struct mm_region *mem_map = early_map; 36 37 void cpu_name(char *name) 38 { 39 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 40 unsigned int i, svr, ver; 41 42 svr = gur_in32(&gur->svr); 43 ver = SVR_SOC_VER(svr); 44 45 for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) 46 if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) { 47 strcpy(name, cpu_type_list[i].name); 48 49 if (IS_E_PROCESSOR(svr)) 50 strcat(name, "E"); 51 52 sprintf(name + strlen(name), " Rev%d.%d", 53 SVR_MAJ(svr), SVR_MIN(svr)); 54 break; 55 } 56 57 if (i == ARRAY_SIZE(cpu_type_list)) 58 strcpy(name, "unknown"); 59 } 60 61 #ifndef CONFIG_SYS_DCACHE_OFF 62 /* 63 * To start MMU before DDR is available, we create MMU table in SRAM. 64 * The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three 65 * levels of translation tables here to cover 40-bit address space. 66 * We use 4KB granule size, with 40 bits physical address, T0SZ=24 67 * Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose. 68 * Note, the debug print in cache_v8.c is not usable for debugging 69 * these early MMU tables because UART is not yet available. 70 */ 71 static inline void early_mmu_setup(void) 72 { 73 unsigned int el = current_el(); 74 75 /* global data is already setup, no allocation yet */ 76 gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE; 77 gd->arch.tlb_fillptr = gd->arch.tlb_addr; 78 gd->arch.tlb_size = EARLY_PGTABLE_SIZE; 79 80 /* Create early page tables */ 81 setup_pgtables(); 82 83 /* point TTBR to the new table */ 84 set_ttbr_tcr_mair(el, gd->arch.tlb_addr, 85 get_tcr(el, NULL, NULL) & 86 ~(TCR_ORGN_MASK | TCR_IRGN_MASK), 87 MEMORY_ATTRIBUTES); 88 89 set_sctlr(get_sctlr() | CR_M); 90 } 91 92 static void fix_pcie_mmu_map(void) 93 { 94 #ifdef CONFIG_LS2080A 95 unsigned int i; 96 u32 svr, ver; 97 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 98 99 svr = gur_in32(&gur->svr); 100 ver = SVR_SOC_VER(svr); 101 102 /* Fix PCIE base and size for LS2088A */ 103 if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) || 104 (ver == SVR_LS2048A) || (ver == SVR_LS2044A)) { 105 for (i = 0; i < ARRAY_SIZE(final_map); i++) { 106 switch (final_map[i].phys) { 107 case CONFIG_SYS_PCIE1_PHYS_ADDR: 108 final_map[i].phys = 0x2000000000ULL; 109 final_map[i].virt = 0x2000000000ULL; 110 final_map[i].size = 0x800000000ULL; 111 break; 112 case CONFIG_SYS_PCIE2_PHYS_ADDR: 113 final_map[i].phys = 0x2800000000ULL; 114 final_map[i].virt = 0x2800000000ULL; 115 final_map[i].size = 0x800000000ULL; 116 break; 117 case CONFIG_SYS_PCIE3_PHYS_ADDR: 118 final_map[i].phys = 0x3000000000ULL; 119 final_map[i].virt = 0x3000000000ULL; 120 final_map[i].size = 0x800000000ULL; 121 break; 122 case CONFIG_SYS_PCIE4_PHYS_ADDR: 123 final_map[i].phys = 0x3800000000ULL; 124 final_map[i].virt = 0x3800000000ULL; 125 final_map[i].size = 0x800000000ULL; 126 break; 127 default: 128 break; 129 } 130 } 131 } 132 #endif 133 } 134 135 /* 136 * The final tables look similar to early tables, but different in detail. 137 * These tables are in DRAM. Sub tables are added to enable cache for 138 * QBMan and OCRAM. 139 * 140 * Put the MMU table in secure memory if gd->arch.secure_ram is valid. 141 * OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0. 142 */ 143 static inline void final_mmu_setup(void) 144 { 145 u64 tlb_addr_save = gd->arch.tlb_addr; 146 unsigned int el = current_el(); 147 int index; 148 149 /* fix the final_map before filling in the block entries */ 150 fix_pcie_mmu_map(); 151 152 mem_map = final_map; 153 154 /* Update mapping for DDR to actual size */ 155 for (index = 0; index < ARRAY_SIZE(final_map) - 2; index++) { 156 /* 157 * Find the entry for DDR mapping and update the address and 158 * size. Zero-sized mapping will be skipped when creating MMU 159 * table. 160 */ 161 switch (final_map[index].virt) { 162 case CONFIG_SYS_FSL_DRAM_BASE1: 163 final_map[index].virt = gd->bd->bi_dram[0].start; 164 final_map[index].phys = gd->bd->bi_dram[0].start; 165 final_map[index].size = gd->bd->bi_dram[0].size; 166 break; 167 #ifdef CONFIG_SYS_FSL_DRAM_BASE2 168 case CONFIG_SYS_FSL_DRAM_BASE2: 169 #if (CONFIG_NR_DRAM_BANKS >= 2) 170 final_map[index].virt = gd->bd->bi_dram[1].start; 171 final_map[index].phys = gd->bd->bi_dram[1].start; 172 final_map[index].size = gd->bd->bi_dram[1].size; 173 #else 174 final_map[index].size = 0; 175 #endif 176 break; 177 #endif 178 #ifdef CONFIG_SYS_FSL_DRAM_BASE3 179 case CONFIG_SYS_FSL_DRAM_BASE3: 180 #if (CONFIG_NR_DRAM_BANKS >= 3) 181 final_map[index].virt = gd->bd->bi_dram[2].start; 182 final_map[index].phys = gd->bd->bi_dram[2].start; 183 final_map[index].size = gd->bd->bi_dram[2].size; 184 #else 185 final_map[index].size = 0; 186 #endif 187 break; 188 #endif 189 default: 190 break; 191 } 192 } 193 194 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE 195 if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) { 196 if (el == 3) { 197 /* 198 * Only use gd->arch.secure_ram if the address is 199 * recalculated. Align to 4KB for MMU table. 200 */ 201 /* put page tables in secure ram */ 202 index = ARRAY_SIZE(final_map) - 2; 203 gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff; 204 final_map[index].virt = gd->arch.secure_ram & ~0x3; 205 final_map[index].phys = final_map[index].virt; 206 final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE; 207 final_map[index].attrs = PTE_BLOCK_OUTER_SHARE; 208 gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED; 209 tlb_addr_save = gd->arch.tlb_addr; 210 } else { 211 /* Use allocated (board_f.c) memory for TLB */ 212 tlb_addr_save = gd->arch.tlb_allocated; 213 gd->arch.tlb_addr = tlb_addr_save; 214 } 215 } 216 #endif 217 218 /* Reset the fill ptr */ 219 gd->arch.tlb_fillptr = tlb_addr_save; 220 221 /* Create normal system page tables */ 222 setup_pgtables(); 223 224 /* Create emergency page tables */ 225 gd->arch.tlb_addr = gd->arch.tlb_fillptr; 226 gd->arch.tlb_emerg = gd->arch.tlb_addr; 227 setup_pgtables(); 228 gd->arch.tlb_addr = tlb_addr_save; 229 230 /* Disable cache and MMU */ 231 dcache_disable(); /* TLBs are invalidated */ 232 invalidate_icache_all(); 233 234 /* point TTBR to the new table */ 235 set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL), 236 MEMORY_ATTRIBUTES); 237 238 set_sctlr(get_sctlr() | CR_M); 239 } 240 241 u64 get_page_table_size(void) 242 { 243 return 0x10000; 244 } 245 246 int arch_cpu_init(void) 247 { 248 icache_enable(); 249 __asm_invalidate_dcache_all(); 250 __asm_invalidate_tlb_all(); 251 early_mmu_setup(); 252 set_sctlr(get_sctlr() | CR_C); 253 return 0; 254 } 255 256 void mmu_setup(void) 257 { 258 final_mmu_setup(); 259 } 260 261 /* 262 * This function is called from common/board_r.c. 263 * It recreates MMU table in main memory. 264 */ 265 void enable_caches(void) 266 { 267 mmu_setup(); 268 __asm_invalidate_tlb_all(); 269 icache_enable(); 270 dcache_enable(); 271 } 272 #endif 273 274 u32 initiator_type(u32 cluster, int init_id) 275 { 276 struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 277 u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK; 278 u32 type = 0; 279 280 type = gur_in32(&gur->tp_ityp[idx]); 281 if (type & TP_ITYP_AV) 282 return type; 283 284 return 0; 285 } 286 287 u32 cpu_pos_mask(void) 288 { 289 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 290 int i = 0; 291 u32 cluster, type, mask = 0; 292 293 do { 294 int j; 295 296 cluster = gur_in32(&gur->tp_cluster[i].lower); 297 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) { 298 type = initiator_type(cluster, j); 299 if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)) 300 mask |= 1 << (i * TP_INIT_PER_CLUSTER + j); 301 } 302 i++; 303 } while ((cluster & TP_CLUSTER_EOC) == 0x0); 304 305 return mask; 306 } 307 308 u32 cpu_mask(void) 309 { 310 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 311 int i = 0, count = 0; 312 u32 cluster, type, mask = 0; 313 314 do { 315 int j; 316 317 cluster = gur_in32(&gur->tp_cluster[i].lower); 318 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) { 319 type = initiator_type(cluster, j); 320 if (type) { 321 if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM) 322 mask |= 1 << count; 323 count++; 324 } 325 } 326 i++; 327 } while ((cluster & TP_CLUSTER_EOC) == 0x0); 328 329 return mask; 330 } 331 332 /* 333 * Return the number of cores on this SOC. 334 */ 335 int cpu_numcores(void) 336 { 337 return hweight32(cpu_mask()); 338 } 339 340 int fsl_qoriq_core_to_cluster(unsigned int core) 341 { 342 struct ccsr_gur __iomem *gur = 343 (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR); 344 int i = 0, count = 0; 345 u32 cluster; 346 347 do { 348 int j; 349 350 cluster = gur_in32(&gur->tp_cluster[i].lower); 351 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) { 352 if (initiator_type(cluster, j)) { 353 if (count == core) 354 return i; 355 count++; 356 } 357 } 358 i++; 359 } while ((cluster & TP_CLUSTER_EOC) == 0x0); 360 361 return -1; /* cannot identify the cluster */ 362 } 363 364 u32 fsl_qoriq_core_to_type(unsigned int core) 365 { 366 struct ccsr_gur __iomem *gur = 367 (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR); 368 int i = 0, count = 0; 369 u32 cluster, type; 370 371 do { 372 int j; 373 374 cluster = gur_in32(&gur->tp_cluster[i].lower); 375 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) { 376 type = initiator_type(cluster, j); 377 if (type) { 378 if (count == core) 379 return type; 380 count++; 381 } 382 } 383 i++; 384 } while ((cluster & TP_CLUSTER_EOC) == 0x0); 385 386 return -1; /* cannot identify the cluster */ 387 } 388 389 #ifndef CONFIG_FSL_LSCH3 390 uint get_svr(void) 391 { 392 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 393 394 return gur_in32(&gur->svr); 395 } 396 #endif 397 398 #ifdef CONFIG_DISPLAY_CPUINFO 399 int print_cpuinfo(void) 400 { 401 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 402 struct sys_info sysinfo; 403 char buf[32]; 404 unsigned int i, core; 405 u32 type, rcw, svr = gur_in32(&gur->svr); 406 407 puts("SoC: "); 408 409 cpu_name(buf); 410 printf(" %s (0x%x)\n", buf, svr); 411 memset((u8 *)buf, 0x00, ARRAY_SIZE(buf)); 412 get_sys_info(&sysinfo); 413 puts("Clock Configuration:"); 414 for_each_cpu(i, core, cpu_numcores(), cpu_mask()) { 415 if (!(i % 3)) 416 puts("\n "); 417 type = TP_ITYP_VER(fsl_qoriq_core_to_type(core)); 418 printf("CPU%d(%s):%-4s MHz ", core, 419 type == TY_ITYP_VER_A7 ? "A7 " : 420 (type == TY_ITYP_VER_A53 ? "A53" : 421 (type == TY_ITYP_VER_A57 ? "A57" : 422 (type == TY_ITYP_VER_A72 ? "A72" : " "))), 423 strmhz(buf, sysinfo.freq_processor[core])); 424 } 425 /* Display platform clock as Bus frequency. */ 426 printf("\n Bus: %-4s MHz ", 427 strmhz(buf, sysinfo.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV)); 428 printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus)); 429 #ifdef CONFIG_SYS_DPAA_FMAN 430 printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0])); 431 #endif 432 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR 433 if (soc_has_dp_ddr()) { 434 printf(" DP-DDR: %-4s MT/s", 435 strmhz(buf, sysinfo.freq_ddrbus2)); 436 } 437 #endif 438 puts("\n"); 439 440 /* 441 * Display the RCW, so that no one gets confused as to what RCW 442 * we're actually using for this boot. 443 */ 444 puts("Reset Configuration Word (RCW):"); 445 for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { 446 rcw = gur_in32(&gur->rcwsr[i]); 447 if ((i % 4) == 0) 448 printf("\n %08x:", i * 4); 449 printf(" %08x", rcw); 450 } 451 puts("\n"); 452 453 return 0; 454 } 455 #endif 456 457 #ifdef CONFIG_FSL_ESDHC 458 int cpu_mmc_init(bd_t *bis) 459 { 460 return fsl_esdhc_mmc_init(bis); 461 } 462 #endif 463 464 int cpu_eth_init(bd_t *bis) 465 { 466 int error = 0; 467 468 #ifdef CONFIG_FSL_MC_ENET 469 error = fsl_mc_ldpaa_init(bis); 470 #endif 471 #ifdef CONFIG_FMAN_ENET 472 fm_standard_init(bis); 473 #endif 474 return error; 475 } 476 477 int arch_early_init_r(void) 478 { 479 #ifdef CONFIG_MP 480 int rv = 1; 481 u32 psci_ver = 0xffffffff; 482 #endif 483 484 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635 485 u32 svr_dev_id; 486 /* 487 * erratum A009635 is valid only for LS2080A SoC and 488 * its personalitiesi 489 */ 490 svr_dev_id = get_svr() >> 16; 491 if (svr_dev_id == SVR_DEV_LS2080A) 492 erratum_a009635(); 493 #endif 494 #if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR) 495 erratum_a009942_check_cpo(); 496 #endif 497 #ifdef CONFIG_MP 498 #if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \ 499 defined(CONFIG_SEC_FIRMWARE_ARMV8_PSCI) 500 /* Check the psci version to determine if the psci is supported */ 501 psci_ver = sec_firmware_support_psci_version(); 502 #endif 503 if (psci_ver == 0xffffffff) { 504 rv = fsl_layerscape_wake_seconday_cores(); 505 if (rv) 506 printf("Did not wake secondary cores\n"); 507 } 508 #endif 509 510 #ifdef CONFIG_SYS_HAS_SERDES 511 fsl_serdes_init(); 512 #endif 513 #ifdef CONFIG_FMAN_ENET 514 fman_enet_init(); 515 #endif 516 return 0; 517 } 518 519 int timer_init(void) 520 { 521 u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR; 522 #ifdef CONFIG_FSL_LSCH3 523 u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; 524 #endif 525 #ifdef CONFIG_LS2080A 526 u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET; 527 u32 svr_dev_id; 528 #endif 529 #ifdef COUNTER_FREQUENCY_REAL 530 unsigned long cntfrq = COUNTER_FREQUENCY_REAL; 531 532 /* Update with accurate clock frequency */ 533 asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory"); 534 #endif 535 536 #ifdef CONFIG_FSL_LSCH3 537 /* Enable timebase for all clusters. 538 * It is safe to do so even some clusters are not enabled. 539 */ 540 out_le32(cltbenr, 0xf); 541 #endif 542 543 #ifdef CONFIG_LS2080A 544 /* 545 * In certain Layerscape SoCs, the clock for each core's 546 * has an enable bit in the PMU Physical Core Time Base Enable 547 * Register (PCTBENR), which allows the watchdog to operate. 548 */ 549 setbits_le32(pctbenr, 0xff); 550 /* 551 * For LS2080A SoC and its personalities, timer controller 552 * offset is different 553 */ 554 svr_dev_id = get_svr() >> 16; 555 if (svr_dev_id == SVR_DEV_LS2080A) 556 cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR; 557 558 #endif 559 560 /* Enable clock for timer 561 * This is a global setting. 562 */ 563 out_le32(cntcr, 0x1); 564 565 return 0; 566 } 567 568 __efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR; 569 570 void __efi_runtime reset_cpu(ulong addr) 571 { 572 u32 val; 573 574 /* Raise RESET_REQ_B */ 575 val = scfg_in32(rstcr); 576 val |= 0x02; 577 scfg_out32(rstcr, val); 578 } 579 580 #ifdef CONFIG_EFI_LOADER 581 582 void __efi_runtime EFIAPI efi_reset_system( 583 enum efi_reset_type reset_type, 584 efi_status_t reset_status, 585 unsigned long data_size, void *reset_data) 586 { 587 switch (reset_type) { 588 case EFI_RESET_COLD: 589 case EFI_RESET_WARM: 590 reset_cpu(0); 591 break; 592 case EFI_RESET_SHUTDOWN: 593 /* Nothing we can do */ 594 break; 595 } 596 597 while (1) { } 598 } 599 600 void efi_reset_system_init(void) 601 { 602 efi_add_runtime_mmio(&rstcr, sizeof(*rstcr)); 603 } 604 605 #endif 606 607 phys_size_t board_reserve_ram_top(phys_size_t ram_size) 608 { 609 phys_size_t ram_top = ram_size; 610 611 #ifdef CONFIG_FSL_MC_ENET 612 /* The start address of MC reserved memory needs to be aligned. */ 613 ram_top -= mc_get_dram_block_size(); 614 ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1); 615 #endif 616 617 return ram_size - ram_top; 618 } 619 620 phys_size_t get_effective_memsize(void) 621 { 622 phys_size_t ea_size, rem = 0; 623 624 /* 625 * For ARMv8 SoCs, DDR memory is split into two or three regions. The 626 * first region is 2GB space at 0x8000_0000. If the memory extends to 627 * the second region (or the third region if applicable), the secure 628 * memory and Management Complex (MC) memory should be put into the 629 * highest region, i.e. the end of DDR memory. CONFIG_MAX_MEM_MAPPED 630 * is set to the size of first region so U-Boot doesn't relocate itself 631 * into higher address. Should DDR be configured to skip the first 632 * region, this function needs to be adjusted. 633 */ 634 if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) { 635 ea_size = CONFIG_MAX_MEM_MAPPED; 636 rem = gd->ram_size - ea_size; 637 } else { 638 ea_size = gd->ram_size; 639 } 640 641 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE 642 /* Check if we have enough space for secure memory */ 643 if (rem > CONFIG_SYS_MEM_RESERVE_SECURE) { 644 rem -= CONFIG_SYS_MEM_RESERVE_SECURE; 645 } else { 646 if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE) { 647 ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE; 648 rem = 0; /* Presume MC requires more memory */ 649 } else { 650 printf("Error: No enough space for secure memory.\n"); 651 } 652 } 653 #endif 654 /* Check if we have enough memory for MC */ 655 if (rem < board_reserve_ram_top(rem)) { 656 /* Not enough memory in high region to reserve */ 657 if (ea_size > board_reserve_ram_top(rem)) 658 ea_size -= board_reserve_ram_top(rem); 659 else 660 printf("Error: No enough space for reserved memory.\n"); 661 } 662 663 return ea_size; 664 } 665 666 void dram_init_banksize(void) 667 { 668 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY 669 phys_size_t dp_ddr_size; 670 #endif 671 672 /* 673 * gd->ram_size has the total size of DDR memory, less reserved secure 674 * memory. The DDR extends from low region to high region(s) presuming 675 * no hole is created with DDR configuration. gd->arch.secure_ram tracks 676 * the location of secure memory. gd->arch.resv_ram tracks the location 677 * of reserved memory for Management Complex (MC). 678 */ 679 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 680 if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) { 681 gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE; 682 gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; 683 gd->bd->bi_dram[1].size = gd->ram_size - 684 CONFIG_SYS_DDR_BLOCK1_SIZE; 685 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE 686 if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) { 687 gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE; 688 gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size - 689 CONFIG_SYS_DDR_BLOCK2_SIZE; 690 gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE; 691 } 692 #endif 693 } else { 694 gd->bd->bi_dram[0].size = gd->ram_size; 695 } 696 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE 697 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE 698 if (gd->bd->bi_dram[2].size >= CONFIG_SYS_MEM_RESERVE_SECURE) { 699 gd->bd->bi_dram[2].size -= CONFIG_SYS_MEM_RESERVE_SECURE; 700 gd->arch.secure_ram = gd->bd->bi_dram[2].start + 701 gd->bd->bi_dram[2].size; 702 gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; 703 gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE; 704 } else 705 #endif 706 { 707 if (gd->bd->bi_dram[1].size >= CONFIG_SYS_MEM_RESERVE_SECURE) { 708 gd->bd->bi_dram[1].size -= 709 CONFIG_SYS_MEM_RESERVE_SECURE; 710 gd->arch.secure_ram = gd->bd->bi_dram[1].start + 711 gd->bd->bi_dram[1].size; 712 gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; 713 gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE; 714 } else if (gd->bd->bi_dram[0].size > 715 CONFIG_SYS_MEM_RESERVE_SECURE) { 716 gd->bd->bi_dram[0].size -= 717 CONFIG_SYS_MEM_RESERVE_SECURE; 718 gd->arch.secure_ram = gd->bd->bi_dram[0].start + 719 gd->bd->bi_dram[0].size; 720 gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; 721 gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE; 722 } 723 } 724 #endif /* CONFIG_SYS_MEM_RESERVE_SECURE */ 725 726 #ifdef CONFIG_FSL_MC_ENET 727 /* Assign memory for MC */ 728 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE 729 if (gd->bd->bi_dram[2].size >= 730 board_reserve_ram_top(gd->bd->bi_dram[2].size)) { 731 gd->arch.resv_ram = gd->bd->bi_dram[2].start + 732 gd->bd->bi_dram[2].size - 733 board_reserve_ram_top(gd->bd->bi_dram[2].size); 734 } else 735 #endif 736 { 737 if (gd->bd->bi_dram[1].size >= 738 board_reserve_ram_top(gd->bd->bi_dram[1].size)) { 739 gd->arch.resv_ram = gd->bd->bi_dram[1].start + 740 gd->bd->bi_dram[1].size - 741 board_reserve_ram_top(gd->bd->bi_dram[1].size); 742 } else if (gd->bd->bi_dram[0].size > 743 board_reserve_ram_top(gd->bd->bi_dram[0].size)) { 744 gd->arch.resv_ram = gd->bd->bi_dram[0].start + 745 gd->bd->bi_dram[0].size - 746 board_reserve_ram_top(gd->bd->bi_dram[0].size); 747 } 748 } 749 #endif /* CONFIG_FSL_MC_ENET */ 750 751 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY 752 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE 753 #error "This SoC shouldn't have DP DDR" 754 #endif 755 if (soc_has_dp_ddr()) { 756 /* initialize DP-DDR here */ 757 puts("DP-DDR: "); 758 /* 759 * DDR controller use 0 as the base address for binding. 760 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. 761 */ 762 dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, 763 CONFIG_DP_DDR_CTRL, 764 CONFIG_DP_DDR_NUM_CTRLS, 765 CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR, 766 NULL, NULL, NULL); 767 if (dp_ddr_size) { 768 gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; 769 gd->bd->bi_dram[2].size = dp_ddr_size; 770 } else { 771 puts("Not detected"); 772 } 773 } 774 #endif 775 } 776 777 #if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD) 778 void efi_add_known_memory(void) 779 { 780 int i; 781 phys_addr_t ram_start, start; 782 phys_size_t ram_size; 783 u64 pages; 784 785 /* Add RAM */ 786 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { 787 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY 788 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE 789 #error "This SoC shouldn't have DP DDR" 790 #endif 791 if (i == 2) 792 continue; /* skip DP-DDR */ 793 #endif 794 ram_start = gd->bd->bi_dram[i].start; 795 ram_size = gd->bd->bi_dram[i].size; 796 #ifdef CONFIG_RESV_RAM 797 if (gd->arch.resv_ram >= ram_start && 798 gd->arch.resv_ram < ram_start + ram_size) 799 ram_size = gd->arch.resv_ram - ram_start; 800 #endif 801 start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK; 802 pages = (ram_size + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT; 803 804 efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY, 805 false); 806 } 807 } 808 #endif 809 810 /* 811 * Before DDR size is known, early MMU table have DDR mapped as device memory 812 * to avoid speculative access. To relocate U-Boot to DDR, "normal memory" 813 * needs to be set for these mappings. 814 * If a special case configures DDR with holes in the mapping, the holes need 815 * to be marked as invalid. This is not implemented in this function. 816 */ 817 void update_early_mmu_table(void) 818 { 819 if (!gd->arch.tlb_addr) 820 return; 821 822 if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) { 823 mmu_change_region_attr( 824 CONFIG_SYS_SDRAM_BASE, 825 gd->ram_size, 826 PTE_BLOCK_MEMTYPE(MT_NORMAL) | 827 PTE_BLOCK_OUTER_SHARE | 828 PTE_BLOCK_NS | 829 PTE_TYPE_VALID); 830 } else { 831 mmu_change_region_attr( 832 CONFIG_SYS_SDRAM_BASE, 833 CONFIG_SYS_DDR_BLOCK1_SIZE, 834 PTE_BLOCK_MEMTYPE(MT_NORMAL) | 835 PTE_BLOCK_OUTER_SHARE | 836 PTE_BLOCK_NS | 837 PTE_TYPE_VALID); 838 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE 839 #ifndef CONFIG_SYS_DDR_BLOCK2_SIZE 840 #error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE" 841 #endif 842 if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE > 843 CONFIG_SYS_DDR_BLOCK2_SIZE) { 844 mmu_change_region_attr( 845 CONFIG_SYS_DDR_BLOCK2_BASE, 846 CONFIG_SYS_DDR_BLOCK2_SIZE, 847 PTE_BLOCK_MEMTYPE(MT_NORMAL) | 848 PTE_BLOCK_OUTER_SHARE | 849 PTE_BLOCK_NS | 850 PTE_TYPE_VALID); 851 mmu_change_region_attr( 852 CONFIG_SYS_DDR_BLOCK3_BASE, 853 gd->ram_size - 854 CONFIG_SYS_DDR_BLOCK1_SIZE - 855 CONFIG_SYS_DDR_BLOCK2_SIZE, 856 PTE_BLOCK_MEMTYPE(MT_NORMAL) | 857 PTE_BLOCK_OUTER_SHARE | 858 PTE_BLOCK_NS | 859 PTE_TYPE_VALID); 860 } else 861 #endif 862 { 863 mmu_change_region_attr( 864 CONFIG_SYS_DDR_BLOCK2_BASE, 865 gd->ram_size - 866 CONFIG_SYS_DDR_BLOCK1_SIZE, 867 PTE_BLOCK_MEMTYPE(MT_NORMAL) | 868 PTE_BLOCK_OUTER_SHARE | 869 PTE_BLOCK_NS | 870 PTE_TYPE_VALID); 871 } 872 } 873 } 874 875 __weak int dram_init(void) 876 { 877 gd->ram_size = initdram(0); 878 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) 879 /* This will break-before-make MMU for DDR */ 880 update_early_mmu_table(); 881 #endif 882 883 return 0; 884 } 885