xref: /openbmc/u-boot/arch/arm/cpu/armv7/sunxi/timer.c (revision ad3098f7)
1 /*
2  * (C) Copyright 2007-2011
3  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
4  * Tom Cubie <tangliang@allwinnertech.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <asm/io.h>
11 #include <asm/arch/timer.h>
12 
13 DECLARE_GLOBAL_DATA_PTR;
14 
15 #define TIMER_MODE   (0x0 << 7)	/* continuous mode */
16 #define TIMER_DIV    (0x0 << 4)	/* pre scale 1 */
17 #define TIMER_SRC    (0x1 << 2)	/* osc24m */
18 #define TIMER_RELOAD (0x1 << 1)	/* reload internal value */
19 #define TIMER_EN     (0x1 << 0)	/* enable timer */
20 
21 #define TIMER_CLOCK		(24 * 1000 * 1000)
22 #define COUNT_TO_USEC(x)	((x) / 24)
23 #define USEC_TO_COUNT(x)	((x) * 24)
24 #define TICKS_PER_HZ		(TIMER_CLOCK / CONFIG_SYS_HZ)
25 #define TICKS_TO_HZ(x)		((x) / TICKS_PER_HZ)
26 
27 #define TIMER_LOAD_VAL		0xffffffff
28 
29 #define TIMER_NUM		0	/* we use timer 0 */
30 
31 /* read the 32-bit timer */
32 static ulong read_timer(void)
33 {
34 	struct sunxi_timer_reg *timers =
35 		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
36 	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
37 
38 	/*
39 	 * The hardware timer counts down, therefore we invert to
40 	 * produce an incrementing timer.
41 	 */
42 	return ~readl(&timer->val);
43 }
44 
45 /* init timer register */
46 int timer_init(void)
47 {
48 	struct sunxi_timer_reg *timers =
49 		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
50 	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
51 	writel(TIMER_LOAD_VAL, &timer->inter);
52 	writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
53 	       &timer->ctl);
54 
55 	return 0;
56 }
57 
58 /* timer without interrupts */
59 ulong get_timer(ulong base)
60 {
61 	return get_timer_masked() - base;
62 }
63 
64 ulong get_timer_masked(void)
65 {
66 	/* current tick value */
67 	ulong now = TICKS_TO_HZ(read_timer());
68 
69 	if (now >= gd->arch.lastinc)	/* normal (non rollover) */
70 		gd->arch.tbl += (now - gd->arch.lastinc);
71 	else {
72 		/* rollover */
73 		gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL)
74 				- gd->arch.lastinc) + now;
75 	}
76 	gd->arch.lastinc = now;
77 
78 	return gd->arch.tbl;
79 }
80 
81 /* delay x useconds */
82 void __udelay(unsigned long usec)
83 {
84 	long tmo = USEC_TO_COUNT(usec);
85 	ulong now, last = read_timer();
86 
87 	while (tmo > 0) {
88 		now = read_timer();
89 		if (now > last)	/* normal (non rollover) */
90 			tmo -= now - last;
91 		else		/* rollover */
92 			tmo -= TIMER_LOAD_VAL - last + now;
93 		last = now;
94 	}
95 }
96 
97 /*
98  * This function is derived from PowerPC code (read timebase as long long).
99  * On ARM it just returns the timer value.
100  */
101 unsigned long long get_ticks(void)
102 {
103 	return get_timer(0);
104 }
105 
106 /*
107  * This function is derived from PowerPC code (timebase clock frequency).
108  * On ARM it returns the number of timer ticks per second.
109  */
110 ulong get_tbclk(void)
111 {
112 	return CONFIG_SYS_HZ;
113 }
114