xref: /openbmc/u-boot/arch/arm/cpu/armv7/sunxi/timer.c (revision 286a5c44)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2007-2011
4  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
5  * Tom Cubie <tangliang@allwinnertech.com>
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch/timer.h>
11 
12 DECLARE_GLOBAL_DATA_PTR;
13 
14 #define TIMER_MODE   (0x0 << 7)	/* continuous mode */
15 #define TIMER_DIV    (0x0 << 4)	/* pre scale 1 */
16 #define TIMER_SRC    (0x1 << 2)	/* osc24m */
17 #define TIMER_RELOAD (0x1 << 1)	/* reload internal value */
18 #define TIMER_EN     (0x1 << 0)	/* enable timer */
19 
20 #define TIMER_CLOCK		(24 * 1000 * 1000)
21 #define COUNT_TO_USEC(x)	((x) / 24)
22 #define USEC_TO_COUNT(x)	((x) * 24)
23 #define TICKS_PER_HZ		(TIMER_CLOCK / CONFIG_SYS_HZ)
24 #define TICKS_TO_HZ(x)		((x) / TICKS_PER_HZ)
25 
26 #define TIMER_LOAD_VAL		0xffffffff
27 
28 #define TIMER_NUM		0	/* we use timer 0 */
29 
30 /* read the 32-bit timer */
31 static ulong read_timer(void)
32 {
33 	struct sunxi_timer_reg *timers =
34 		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
35 	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
36 
37 	/*
38 	 * The hardware timer counts down, therefore we invert to
39 	 * produce an incrementing timer.
40 	 */
41 	return ~readl(&timer->val);
42 }
43 
44 /* init timer register */
45 int timer_init(void)
46 {
47 	struct sunxi_timer_reg *timers =
48 		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
49 	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
50 	writel(TIMER_LOAD_VAL, &timer->inter);
51 	writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
52 	       &timer->ctl);
53 
54 	return 0;
55 }
56 
57 /* timer without interrupts */
58 static ulong get_timer_masked(void)
59 {
60 	/* current tick value */
61 	ulong now = TICKS_TO_HZ(read_timer());
62 
63 	if (now >= gd->arch.lastinc)	/* normal (non rollover) */
64 		gd->arch.tbl += (now - gd->arch.lastinc);
65 	else {
66 		/* rollover */
67 		gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL)
68 				- gd->arch.lastinc) + now;
69 	}
70 	gd->arch.lastinc = now;
71 
72 	return gd->arch.tbl;
73 }
74 
75 ulong get_timer(ulong base)
76 {
77 	return get_timer_masked() - base;
78 }
79 
80 /* delay x useconds */
81 void __udelay(unsigned long usec)
82 {
83 	long tmo = USEC_TO_COUNT(usec);
84 	ulong now, last = read_timer();
85 
86 	while (tmo > 0) {
87 		now = read_timer();
88 		if (now > last)	/* normal (non rollover) */
89 			tmo -= now - last;
90 		else		/* rollover */
91 			tmo -= TIMER_LOAD_VAL - last + now;
92 		last = now;
93 	}
94 }
95 
96 /*
97  * This function is derived from PowerPC code (read timebase as long long).
98  * On ARM it just returns the timer value.
99  */
100 unsigned long long get_ticks(void)
101 {
102 	return get_timer(0);
103 }
104 
105 /*
106  * This function is derived from PowerPC code (timebase clock frequency).
107  * On ARM it returns the number of timer ticks per second.
108  */
109 ulong get_tbclk(void)
110 {
111 	return CONFIG_SYS_HZ;
112 }
113