xref: /openbmc/u-boot/arch/arm/cpu/armv7/stv0991/timer.c (revision 78a88f79)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
4  * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
5  */
6 
7 #include <common.h>
8 #include <asm/io.h>
9 #include <asm/arch-stv0991/hardware.h>
10 #include <asm/arch-stv0991/stv0991_cgu.h>
11 #include <asm/arch-stv0991/stv0991_gpt.h>
12 
13 static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
14 				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
15 
16 #define READ_TIMER()	(readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
17 #define GPT_RESOLUTION	(CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
18 
19 DECLARE_GLOBAL_DATA_PTR;
20 
21 #define timestamp gd->arch.tbl
22 #define lastdec gd->arch.lastinc
23 
24 int timer_init(void)
25 {
26 	/* Timer1 clock configuration */
27 	writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
28 	writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
29 			TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
30 
31 	/* Stop the timer */
32 	writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
33 	writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
34 	/* Configure timer for auto-reload */
35 	writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
36 			&gpt1_regs_ptr->cr1);
37 
38 	/* load value for free running */
39 	writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
40 
41 	/* start timer */
42 	writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
43 			&gpt1_regs_ptr->cr1);
44 
45 	/* Reset the timer */
46 	lastdec = READ_TIMER();
47 	timestamp = 0;
48 
49 	return 0;
50 }
51 
52 /*
53  * timer without interrupts
54  */
55 ulong get_timer(ulong base)
56 {
57 	return (get_timer_masked() / GPT_RESOLUTION) - base;
58 }
59 
60 void __udelay(unsigned long usec)
61 {
62 	ulong tmo;
63 	ulong start = get_timer_masked();
64 	ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
65 	ulong rndoff;
66 
67 	rndoff = (usec % 10) ? 1 : 0;
68 
69 	/* tenudelcnt timer tick gives 10 microsecconds delay */
70 	tmo = ((usec / 10) + rndoff) * tenudelcnt;
71 
72 	while ((ulong) (get_timer_masked() - start) < tmo)
73 		;
74 }
75 
76 ulong get_timer_masked(void)
77 {
78 	ulong now = READ_TIMER();
79 
80 	if (now >= lastdec) {
81 		/* normal mode */
82 		timestamp += now - lastdec;
83 	} else {
84 		/* we have an overflow ... */
85 		timestamp += now + GPT_FREE_RUNNING - lastdec;
86 	}
87 	lastdec = now;
88 
89 	return timestamp;
90 }
91 
92 void udelay_masked(unsigned long usec)
93 {
94 	return udelay(usec);
95 }
96 
97 /*
98  * This function is derived from PowerPC code (read timebase as long long).
99  * On ARM it just returns the timer value.
100  */
101 unsigned long long get_ticks(void)
102 {
103 	return get_timer(0);
104 }
105 
106 /*
107  * This function is derived from PowerPC code (timebase clock frequency).
108  * On ARM it returns the number of timer ticks per second.
109  */
110 ulong get_tbclk(void)
111 {
112 	return CONFIG_STV0991_HZ;
113 }
114