xref: /openbmc/u-boot/arch/arm/cpu/armv7/stv0991/timer.c (revision 3ba98ed8)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
4  * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
5  */
6 
7 #include <common.h>
8 #include <asm/io.h>
9 #include <asm/arch-stv0991/hardware.h>
10 #include <asm/arch-stv0991/stv0991_cgu.h>
11 #include <asm/arch-stv0991/stv0991_gpt.h>
12 
13 static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
14 				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
15 
16 #define READ_TIMER()	(readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
17 #define GPT_RESOLUTION	(CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
18 
19 DECLARE_GLOBAL_DATA_PTR;
20 
21 #define timestamp gd->arch.tbl
22 #define lastdec gd->arch.lastinc
23 
24 static ulong get_timer_masked(void);
25 
26 int timer_init(void)
27 {
28 	/* Timer1 clock configuration */
29 	writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
30 	writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
31 			TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
32 
33 	/* Stop the timer */
34 	writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
35 	writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
36 	/* Configure timer for auto-reload */
37 	writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
38 			&gpt1_regs_ptr->cr1);
39 
40 	/* load value for free running */
41 	writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
42 
43 	/* start timer */
44 	writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
45 			&gpt1_regs_ptr->cr1);
46 
47 	/* Reset the timer */
48 	lastdec = READ_TIMER();
49 	timestamp = 0;
50 
51 	return 0;
52 }
53 
54 /*
55  * timer without interrupts
56  */
57 ulong get_timer(ulong base)
58 {
59 	return (get_timer_masked() / GPT_RESOLUTION) - base;
60 }
61 
62 void __udelay(unsigned long usec)
63 {
64 	ulong tmo;
65 	ulong start = get_timer_masked();
66 	ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
67 	ulong rndoff;
68 
69 	rndoff = (usec % 10) ? 1 : 0;
70 
71 	/* tenudelcnt timer tick gives 10 microsecconds delay */
72 	tmo = ((usec / 10) + rndoff) * tenudelcnt;
73 
74 	while ((ulong) (get_timer_masked() - start) < tmo)
75 		;
76 }
77 
78 static ulong get_timer_masked(void)
79 {
80 	ulong now = READ_TIMER();
81 
82 	if (now >= lastdec) {
83 		/* normal mode */
84 		timestamp += now - lastdec;
85 	} else {
86 		/* we have an overflow ... */
87 		timestamp += now + GPT_FREE_RUNNING - lastdec;
88 	}
89 	lastdec = now;
90 
91 	return timestamp;
92 }
93 
94 /*
95  * This function is derived from PowerPC code (read timebase as long long).
96  * On ARM it just returns the timer value.
97  */
98 unsigned long long get_ticks(void)
99 {
100 	return get_timer(0);
101 }
102 
103 /*
104  * This function is derived from PowerPC code (timebase clock frequency).
105  * On ARM it returns the number of timer ticks per second.
106  */
107 ulong get_tbclk(void)
108 {
109 	return CONFIG_STV0991_HZ;
110 }
111