xref: /openbmc/u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c (revision 3e584b94)
1 /*
2  * (C) Copyright 2014
3  * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <asm/io.h>
9 #include <asm/arch/stv0991_creg.h>
10 #include <asm/arch/stv0991_periph.h>
11 #include <asm/arch/hardware.h>
12 
13 static struct stv0991_creg *const stv0991_creg = \
14 			(struct stv0991_creg *)CREG_BASE_ADDR;
15 
16 int stv0991_pinmux_config(int peripheral)
17 {
18 	switch (peripheral) {
19 	case UART_GPIOC_30_31:
20 		/* SSDA/SSCL pad muxing to UART Rx/Dx */
21 		writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) |
22 				CFG_GPIOC_31_UART_RX,
23 				&stv0991_creg->mux12);
24 		writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) |
25 				CFG_GPIOC_30_UART_TX,
26 				&stv0991_creg->mux12);
27 		/* SSDA/SSCL pad config to push pull*/
28 		writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) |
29 				CFG_GPIOC_31_MODE_PP,
30 				&stv0991_creg->cfg_pad6);
31 		writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) |
32 				CFG_GPIOC_30_MODE_HIGH,
33 				&stv0991_creg->cfg_pad6);
34 		break;
35 	case UART_GPIOB_16_17:
36 		/* ethernet rx_6/7 to UART Rx/Dx */
37 		writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) |
38 				CFG_GPIOB_17_UART_RX,
39 				&stv0991_creg->mux7);
40 		writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) |
41 				CFG_GPIOB_16_UART_TX,
42 				&stv0991_creg->mux7);
43 		break;
44 	case ETH_GPIOB_10_31_C_0_4:
45 		writel(readl(&stv0991_creg->mux6) & 0x000000FF,
46 				&stv0991_creg->mux6);
47 		writel(0x00000000, &stv0991_creg->mux7);
48 		writel(0x00000000, &stv0991_creg->mux8);
49 		writel(readl(&stv0991_creg->mux9) & 0xFFF00000,
50 				&stv0991_creg->mux9);
51 		/* Ethernet Voltage configuration to 1.8V*/
52 		writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
53 				ETH_VDD_CFG, &stv0991_creg->vdd_pad1);
54 		writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
55 				ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1);
56 
57 		break;
58 	case QSPI_CS_CLK_PAD:
59 		writel((readl(&stv0991_creg->mux13) & FLASH_CS_NC_MASK) |
60 				CFG_FLASH_CS_NC, &stv0991_creg->mux13);
61 		writel((readl(&stv0991_creg->mux13) & FLASH_CLK_MASK) |
62 				CFG_FLASH_CLK, &stv0991_creg->mux13);
63 	default:
64 		break;
65 	}
66 	return 0;
67 }
68