1 /* 2 * (C) Copyright 2014 3 * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <asm/io.h> 9 #include <asm/arch/hardware.h> 10 #include <asm/arch/stv0991_cgu.h> 11 #include<asm/arch/stv0991_periph.h> 12 13 static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ 14 (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); 15 16 void enable_pll1(void) 17 { 18 /* pll1 already configured for 1000Mhz, just need to enable it */ 19 writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01), 20 &stv0991_cgu_regs->pll1_ctrl); 21 } 22 23 void clock_setup(int peripheral) 24 { 25 switch (peripheral) { 26 case UART_CLOCK_CFG: 27 writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq); 28 break; 29 case ETH_CLOCK_CFG: 30 enable_pll1(); 31 writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq); 32 33 /* Clock selection for ethernet tx_clk & rx_clk*/ 34 writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK) 35 | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl); 36 break; 37 case QSPI_CLOCK_CFG: 38 writel(QSPI_CLK_CTRL, &stv0991_cgu_regs->qspi_freq); 39 break; 40 default: 41 break; 42 } 43 } 44