xref: /openbmc/u-boot/arch/arm/cpu/armv7/start.S (revision 71a988aa) 
1/*
2 * armboot - Startup Code for OMAP3530/ARM Cortex CPU-core
3 *
4 * Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
5 *
6 * Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
7 * Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
8 * Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
9 * Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
10 * Copyright (c) 2003	Kshitij <kshitij@ti.com>
11 * Copyright (c) 2006-2008 Syed Mohammed Khasim <x0khasim@ti.com>
12 *
13 * See file CREDITS for list of people who contributed to this
14 * project.
15 *
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of
19 * the License, or (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * MA 02111-1307 USA
30 */
31
32#include <asm-offsets.h>
33#include <config.h>
34#include <version.h>
35#include <asm/system.h>
36#include <linux/linkage.h>
37
38.globl _start
39_start: b	reset
40	ldr	pc, _undefined_instruction
41	ldr	pc, _software_interrupt
42	ldr	pc, _prefetch_abort
43	ldr	pc, _data_abort
44	ldr	pc, _not_used
45	ldr	pc, _irq
46	ldr	pc, _fiq
47#ifdef CONFIG_SPL_BUILD
48_undefined_instruction: .word _undefined_instruction
49_software_interrupt:	.word _software_interrupt
50_prefetch_abort:	.word _prefetch_abort
51_data_abort:		.word _data_abort
52_not_used:		.word _not_used
53_irq:			.word _irq
54_fiq:			.word _fiq
55_pad:			.word 0x12345678 /* now 16*4=64 */
56#else
57_undefined_instruction: .word undefined_instruction
58_software_interrupt:	.word software_interrupt
59_prefetch_abort:	.word prefetch_abort
60_data_abort:		.word data_abort
61_not_used:		.word not_used
62_irq:			.word irq
63_fiq:			.word fiq
64_pad:			.word 0x12345678 /* now 16*4=64 */
65#endif	/* CONFIG_SPL_BUILD */
66
67.global _end_vect
68_end_vect:
69
70	.balignl 16,0xdeadbeef
71/*************************************************************************
72 *
73 * Startup Code (reset vector)
74 *
75 * do important init only if we don't start from memory!
76 * setup Memory and board specific bits prior to relocation.
77 * relocate armboot to ram
78 * setup stack
79 *
80 *************************************************************************/
81
82.globl _TEXT_BASE
83_TEXT_BASE:
84	.word	CONFIG_SYS_TEXT_BASE
85
86/*
87 * These are defined in the board-specific linker script.
88 */
89.globl _bss_start_ofs
90_bss_start_ofs:
91	.word __bss_start - _start
92
93.global	_image_copy_end_ofs
94_image_copy_end_ofs:
95	.word 	__image_copy_end - _start
96
97.globl _bss_end_ofs
98_bss_end_ofs:
99	.word __bss_end__ - _start
100
101.globl _end_ofs
102_end_ofs:
103	.word _end - _start
104
105#ifdef CONFIG_USE_IRQ
106/* IRQ stack memory (calculated at run-time) */
107.globl IRQ_STACK_START
108IRQ_STACK_START:
109	.word	0x0badc0de
110
111/* IRQ stack memory (calculated at run-time) */
112.globl FIQ_STACK_START
113FIQ_STACK_START:
114	.word 0x0badc0de
115#endif
116
117/* IRQ stack memory (calculated at run-time) + 8 bytes */
118.globl IRQ_STACK_START_IN
119IRQ_STACK_START_IN:
120	.word	0x0badc0de
121
122/*
123 * the actual reset code
124 */
125
126reset:
127	bl	save_boot_params
128	/*
129	 * set the cpu to SVC32 mode
130	 */
131	mrs	r0, cpsr
132	bic	r0, r0, #0x1f
133	orr	r0, r0, #0xd3
134	msr	cpsr,r0
135
136/*
137 * Setup vector:
138 * (OMAP4 spl TEXT_BASE is not 32 byte aligned.
139 * Continue to use ROM code vector only in OMAP4 spl)
140 */
141#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
142	/* Set V=0 in CP15 SCTRL register - for VBAR to point to vector */
143	mrc	p15, 0, r0, c1, c0, 0	@ Read CP15 SCTRL Register
144	bic	r0, #CR_V		@ V = 0
145	mcr	p15, 0, r0, c1, c0, 0	@ Write CP15 SCTRL Register
146
147	/* Set vector address in CP15 VBAR register */
148	ldr	r0, =_start
149	mcr	p15, 0, r0, c12, c0, 0	@Set VBAR
150#endif
151
152	/* the mask ROM code should have PLL and others stable */
153#ifndef CONFIG_SKIP_LOWLEVEL_INIT
154	bl	cpu_init_cp15
155	bl	cpu_init_crit
156#endif
157
158	bl	_main
159
160/*------------------------------------------------------------------------------*/
161
162#ifndef CONFIG_SPL_BUILD
163/*
164 * void relocate_code (addr_sp, gd, addr_moni)
165 *
166 * This "function" does not return, instead it continues in RAM
167 * after relocating the monitor code.
168 *
169 */
170ENTRY(relocate_code)
171	mov	r4, r0	/* save addr_sp */
172	mov	r5, r1	/* save addr of gd */
173	mov	r6, r2	/* save addr of destination */
174
175	adr	r0, _start
176	cmp	r0, r6
177	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
178	beq	relocate_done		/* skip relocation */
179	mov	r1, r6			/* r1 <- scratch for copy_loop */
180	ldr	r3, _image_copy_end_ofs
181	add	r2, r0, r3		/* r2 <- source end address	    */
182
183copy_loop:
184	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
185	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
186	cmp	r0, r2			/* until source end address [r2]    */
187	blo	copy_loop
188
189	/*
190	 * fix .rel.dyn relocations
191	 */
192	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
193	sub	r9, r6, r0		/* r9 <- relocation offset */
194	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
195	add	r10, r10, r0		/* r10 <- sym table in FLASH */
196	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
197	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
198	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
199	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
200fixloop:
201	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
202	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
203	ldr	r1, [r2, #4]
204	and	r7, r1, #0xff
205	cmp	r7, #23			/* relative fixup? */
206	beq	fixrel
207	cmp	r7, #2			/* absolute fixup? */
208	beq	fixabs
209	/* ignore unknown type of fixup */
210	b	fixnext
211fixabs:
212	/* absolute fix: set location to (offset) symbol value */
213	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
214	add	r1, r10, r1		/* r1 <- address of symbol in table */
215	ldr	r1, [r1, #4]		/* r1 <- symbol value */
216	add	r1, r1, r9		/* r1 <- relocated sym addr */
217	b	fixnext
218fixrel:
219	/* relative fix: increase location by offset */
220	ldr	r1, [r0]
221	add	r1, r1, r9
222fixnext:
223	str	r1, [r0]
224	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
225	cmp	r2, r3
226	blo	fixloop
227
228relocate_done:
229
230	bx	lr
231
232_rel_dyn_start_ofs:
233	.word __rel_dyn_start - _start
234_rel_dyn_end_ofs:
235	.word __rel_dyn_end - _start
236_dynsym_start_ofs:
237	.word __dynsym_start - _start
238ENDPROC(relocate_code)
239
240#endif
241
242ENTRY(c_runtime_cpu_setup)
243/*
244 * If I-cache is enabled invalidate it
245 */
246#ifndef CONFIG_SYS_ICACHE_OFF
247	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
248	mcr     p15, 0, r0, c7, c10, 4	@ DSB
249	mcr     p15, 0, r0, c7, c5, 4	@ ISB
250#endif
251/*
252 * Move vector table
253 */
254#if !defined(CONFIG_TEGRA20)
255	/* Set vector address in CP15 VBAR register */
256	ldr     r0, =_start
257	add     r0, r0, r9
258	mcr     p15, 0, r0, c12, c0, 0  @Set VBAR
259#endif /* !Tegra20 */
260
261	bx	lr
262
263ENDPROC(c_runtime_cpu_setup)
264
265/*************************************************************************
266 *
267 * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
268 *	__attribute__((weak));
269 *
270 * Stack pointer is not yet initialized at this moment
271 * Don't save anything to stack even if compiled with -O0
272 *
273 *************************************************************************/
274ENTRY(save_boot_params)
275	bx	lr			@ back to my caller
276ENDPROC(save_boot_params)
277	.weak	save_boot_params
278
279/*************************************************************************
280 *
281 * cpu_init_cp15
282 *
283 * Setup CP15 registers (cache, MMU, TLBs). The I-cache is turned on unless
284 * CONFIG_SYS_ICACHE_OFF is defined.
285 *
286 *************************************************************************/
287ENTRY(cpu_init_cp15)
288	/*
289	 * Invalidate L1 I/D
290	 */
291	mov	r0, #0			@ set up for MCR
292	mcr	p15, 0, r0, c8, c7, 0	@ invalidate TLBs
293	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
294	mcr	p15, 0, r0, c7, c5, 6	@ invalidate BP array
295	mcr     p15, 0, r0, c7, c10, 4	@ DSB
296	mcr     p15, 0, r0, c7, c5, 4	@ ISB
297
298	/*
299	 * disable MMU stuff and caches
300	 */
301	mrc	p15, 0, r0, c1, c0, 0
302	bic	r0, r0, #0x00002000	@ clear bits 13 (--V-)
303	bic	r0, r0, #0x00000007	@ clear bits 2:0 (-CAM)
304	orr	r0, r0, #0x00000002	@ set bit 1 (--A-) Align
305	orr	r0, r0, #0x00000800	@ set bit 11 (Z---) BTB
306#ifdef CONFIG_SYS_ICACHE_OFF
307	bic	r0, r0, #0x00001000	@ clear bit 12 (I) I-cache
308#else
309	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-cache
310#endif
311	mcr	p15, 0, r0, c1, c0, 0
312	mov	pc, lr			@ back to my caller
313ENDPROC(cpu_init_cp15)
314
315#ifndef CONFIG_SKIP_LOWLEVEL_INIT
316/*************************************************************************
317 *
318 * CPU_init_critical registers
319 *
320 * setup important registers
321 * setup memory timing
322 *
323 *************************************************************************/
324ENTRY(cpu_init_crit)
325	/*
326	 * Jump to board specific initialization...
327	 * The Mask ROM will have already initialized
328	 * basic memory. Go here to bump up clock rate and handle
329	 * wake up conditions.
330	 */
331	b	lowlevel_init		@ go setup pll,mux,memory
332ENDPROC(cpu_init_crit)
333#endif
334
335#ifndef CONFIG_SPL_BUILD
336/*
337 *************************************************************************
338 *
339 * Interrupt handling
340 *
341 *************************************************************************
342 */
343@
344@ IRQ stack frame.
345@
346#define S_FRAME_SIZE	72
347
348#define S_OLD_R0	68
349#define S_PSR		64
350#define S_PC		60
351#define S_LR		56
352#define S_SP		52
353
354#define S_IP		48
355#define S_FP		44
356#define S_R10		40
357#define S_R9		36
358#define S_R8		32
359#define S_R7		28
360#define S_R6		24
361#define S_R5		20
362#define S_R4		16
363#define S_R3		12
364#define S_R2		8
365#define S_R1		4
366#define S_R0		0
367
368#define MODE_SVC 0x13
369#define I_BIT	 0x80
370
371/*
372 * use bad_save_user_regs for abort/prefetch/undef/swi ...
373 * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
374 */
375
376	.macro	bad_save_user_regs
377	sub	sp, sp, #S_FRAME_SIZE		@ carve out a frame on current
378						@ user stack
379	stmia	sp, {r0 - r12}			@ Save user registers (now in
380						@ svc mode) r0-r12
381	ldr	r2, IRQ_STACK_START_IN		@ set base 2 words into abort
382						@ stack
383	ldmia	r2, {r2 - r3}			@ get values for "aborted" pc
384						@ and cpsr (into parm regs)
385	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
386
387	add	r5, sp, #S_SP
388	mov	r1, lr
389	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
390	mov	r0, sp				@ save current stack into r0
391						@ (param register)
392	.endm
393
394	.macro	irq_save_user_regs
395	sub	sp, sp, #S_FRAME_SIZE
396	stmia	sp, {r0 - r12}			@ Calling r0-r12
397	add	r8, sp, #S_PC			@ !! R8 NEEDS to be saved !!
398						@ a reserved stack spot would
399						@ be good.
400	stmdb	r8, {sp, lr}^			@ Calling SP, LR
401	str	lr, [r8, #0]			@ Save calling PC
402	mrs	r6, spsr
403	str	r6, [r8, #4]			@ Save CPSR
404	str	r0, [r8, #8]			@ Save OLD_R0
405	mov	r0, sp
406	.endm
407
408	.macro	irq_restore_user_regs
409	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
410	mov	r0, r0
411	ldr	lr, [sp, #S_PC]			@ Get PC
412	add	sp, sp, #S_FRAME_SIZE
413	subs	pc, lr, #4			@ return & move spsr_svc into
414						@ cpsr
415	.endm
416
417	.macro get_bad_stack
418	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack (enter
419						@ in banked mode)
420
421	str	lr, [r13]			@ save caller lr in position 0
422						@ of saved stack
423	mrs	lr, spsr			@ get the spsr
424	str	lr, [r13, #4]			@ save spsr in position 1 of
425						@ saved stack
426
427	mov	r13, #MODE_SVC			@ prepare SVC-Mode
428	@ msr	spsr_c, r13
429	msr	spsr, r13			@ switch modes, make sure
430						@ moves will execute
431	mov	lr, pc				@ capture return pc
432	movs	pc, lr				@ jump to next instruction &
433						@ switch modes.
434	.endm
435
436	.macro get_bad_stack_swi
437	sub	r13, r13, #4			@ space on current stack for
438						@ scratch reg.
439	str	r0, [r13]			@ save R0's value.
440	ldr	r0, IRQ_STACK_START_IN		@ get data regions start
441						@ spots for abort stack
442	str	lr, [r0]			@ save caller lr in position 0
443						@ of saved stack
444	mrs	r0, spsr			@ get the spsr
445	str	lr, [r0, #4]			@ save spsr in position 1 of
446						@ saved stack
447	ldr	r0, [r13]			@ restore r0
448	add	r13, r13, #4			@ pop stack entry
449	.endm
450
451	.macro get_irq_stack			@ setup IRQ stack
452	ldr	sp, IRQ_STACK_START
453	.endm
454
455	.macro get_fiq_stack			@ setup FIQ stack
456	ldr	sp, FIQ_STACK_START
457	.endm
458
459/*
460 * exception handlers
461 */
462	.align	5
463undefined_instruction:
464	get_bad_stack
465	bad_save_user_regs
466	bl	do_undefined_instruction
467
468	.align	5
469software_interrupt:
470	get_bad_stack_swi
471	bad_save_user_regs
472	bl	do_software_interrupt
473
474	.align	5
475prefetch_abort:
476	get_bad_stack
477	bad_save_user_regs
478	bl	do_prefetch_abort
479
480	.align	5
481data_abort:
482	get_bad_stack
483	bad_save_user_regs
484	bl	do_data_abort
485
486	.align	5
487not_used:
488	get_bad_stack
489	bad_save_user_regs
490	bl	do_not_used
491
492#ifdef CONFIG_USE_IRQ
493
494	.align	5
495irq:
496	get_irq_stack
497	irq_save_user_regs
498	bl	do_irq
499	irq_restore_user_regs
500
501	.align	5
502fiq:
503	get_fiq_stack
504	/* someone ought to write a more effective fiq_save_user_regs */
505	irq_save_user_regs
506	bl	do_fiq
507	irq_restore_user_regs
508
509#else
510
511	.align	5
512irq:
513	get_bad_stack
514	bad_save_user_regs
515	bl	do_irq
516
517	.align	5
518fiq:
519	get_bad_stack
520	bad_save_user_regs
521	bl	do_fiq
522
523#endif /* CONFIG_USE_IRQ */
524#endif /* CONFIG_SPL_BUILD */
525