xref: /openbmc/u-boot/arch/arm/cpu/armv7/ls102xa/soc.c (revision 7e8702a0)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <asm/arch/clock.h>
9 #include <asm/io.h>
10 #include <asm/arch/immap_ls102xa.h>
11 #include <asm/arch/ls102xa_soc.h>
12 
13 unsigned int get_soc_major_rev(void)
14 {
15 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
16 	unsigned int svr, major;
17 
18 	svr = in_be32(&gur->svr);
19 	major = SVR_MAJ(svr);
20 
21 	return major;
22 }
23 
24 int arch_soc_init(void)
25 {
26 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
27 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
28 	unsigned int major;
29 
30 #ifdef CONFIG_FSL_QSPI
31 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
32 #endif
33 
34 #ifdef CONFIG_FSL_DCU_FB
35 	out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
36 #endif
37 
38 	/* Configure Little endian for SAI, ASRC and SPDIF */
39 	out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE);
40 
41 	/*
42 	 * Enable snoop requests and DVM message requests for
43 	 * All the slave insterfaces.
44 	 */
45 	out_le32(&cci->slave[0].snoop_ctrl,
46 		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
47 	out_le32(&cci->slave[1].snoop_ctrl,
48 		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
49 	out_le32(&cci->slave[2].snoop_ctrl,
50 		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
51 	out_le32(&cci->slave[4].snoop_ctrl,
52 		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
53 
54 	major = get_soc_major_rev();
55 	if (major == SOC_MAJOR_VER_1_0) {
56 		/*
57 		 * Set CCI-400 Slave interface S1, S2 Shareable Override
58 		 * Register All transactions are treated as non-shareable
59 		 */
60 		out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
61 		out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
62 
63 		/* Workaround for the issue that DDR could not respond to
64 		 * barrier transaction which is generated by executing DSB/ISB
65 		 * instruction. Set CCI-400 control override register to
66 		 * terminate the barrier transaction. After DDR is initialized,
67 		 * allow barrier transaction to DDR again */
68 		out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
69 	}
70 
71 	/* Enable all the snoop signal for various masters */
72 	out_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR |
73 				SCFG_SNPCNFGCR_DCU_RD_WR |
74 				SCFG_SNPCNFGCR_SATA_RD_WR |
75 				SCFG_SNPCNFGCR_USB3_RD_WR |
76 				SCFG_SNPCNFGCR_DBG_RD_WR |
77 				SCFG_SNPCNFGCR_EDMA_SNP);
78 
79 	/*
80 	 * Memory controller require a register write before being enabled.
81 	 * Affects: DDR
82 	 * Register: EDDRTQCFG
83 	 * Description: Memory controller performance is not optimal with
84 	 *		default internal target queue register values.
85 	 * Workaround: Write a value of 63b2_0042h to address: 157_020Ch.
86 	 */
87 	out_be32(&scfg->eddrtqcfg, 0x63b20042);
88 
89 	return 0;
90 }
91