1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <linux/libfdt.h> 9 #include <fdt_support.h> 10 #include <asm/io.h> 11 #include <asm/processor.h> 12 #include <asm/arch/clock.h> 13 #include <linux/ctype.h> 14 #ifdef CONFIG_FSL_ESDHC 15 #include <fsl_esdhc.h> 16 #endif 17 #include <tsec.h> 18 #include <asm/arch/immap_ls102xa.h> 19 #include <fsl_sec.h> 20 21 DECLARE_GLOBAL_DATA_PTR; 22 23 void ft_fixup_enet_phy_connect_type(void *fdt) 24 { 25 struct eth_device *dev; 26 struct tsec_private *priv; 27 const char *enet_path, *phy_path; 28 char enet[16]; 29 char phy[16]; 30 int phy_node; 31 int i = 0; 32 uint32_t ph; 33 char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" }; 34 35 for (; i < ARRAY_SIZE(name); i++) { 36 dev = eth_get_dev_by_name(name[i]); 37 if (dev) { 38 sprintf(enet, "ethernet%d", i); 39 sprintf(phy, "enet%d_rgmii_phy", i); 40 } else { 41 continue; 42 } 43 44 priv = dev->priv; 45 if (priv->flags & TSEC_SGMII) 46 continue; 47 48 enet_path = fdt_get_alias(fdt, enet); 49 if (!enet_path) 50 continue; 51 52 phy_path = fdt_get_alias(fdt, phy); 53 if (!phy_path) 54 continue; 55 56 phy_node = fdt_path_offset(fdt, phy_path); 57 if (phy_node < 0) 58 continue; 59 60 ph = fdt_create_phandle(fdt, phy_node); 61 if (ph) 62 do_fixup_by_path_u32(fdt, enet_path, 63 "phy-handle", ph, 1); 64 65 do_fixup_by_path(fdt, enet_path, "phy-connection-type", 66 phy_string_for_interface( 67 PHY_INTERFACE_MODE_RGMII_ID), 68 sizeof(phy_string_for_interface( 69 PHY_INTERFACE_MODE_RGMII_ID)), 70 1); 71 } 72 } 73 74 void ft_cpu_setup(void *blob, bd_t *bd) 75 { 76 int off; 77 int val; 78 const char *sysclk_path; 79 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 80 unsigned int svr; 81 svr = in_be32(&gur->svr); 82 83 unsigned long busclk = get_bus_freq(0); 84 85 /* delete crypto node if not on an E-processor */ 86 if (!IS_E_PROCESSOR(svr)) 87 fdt_fixup_crypto_node(blob, 0); 88 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 89 else { 90 ccsr_sec_t __iomem *sec; 91 92 sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; 93 fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); 94 } 95 #endif 96 97 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 98 while (off != -FDT_ERR_NOTFOUND) { 99 val = gd->cpu_clk; 100 fdt_setprop(blob, off, "clock-frequency", &val, 4); 101 off = fdt_node_offset_by_prop_value(blob, off, 102 "device_type", "cpu", 4); 103 } 104 105 do_fixup_by_prop_u32(blob, "device_type", "soc", 106 4, "bus-frequency", busclk, 1); 107 108 ft_fixup_enet_phy_connect_type(blob); 109 110 #ifdef CONFIG_SYS_NS16550 111 do_fixup_by_compat_u32(blob, "fsl,16550-FIFO64", 112 "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); 113 #endif 114 115 sysclk_path = fdt_get_alias(blob, "sysclk"); 116 if (sysclk_path) 117 do_fixup_by_path_u32(blob, sysclk_path, "clock-frequency", 118 CONFIG_SYS_CLK_FREQ, 1); 119 do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0", 120 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); 121 122 #if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT) 123 #define UBOOT_HEAD_LEN 0x1000 124 /* 125 * Reserved memory in SD boot deep sleep case. 126 * Second stage uboot binary and malloc space should be reserved. 127 * If the memory they occupied has not been reserved, then this 128 * space would be used by kernel and overwritten in uboot when 129 * deep sleep resume, which cause deep sleep failed. 130 * Since second uboot binary has a head, that space need to be 131 * reserved either(assuming its size is less than 0x1000). 132 */ 133 off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN, 134 CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE + 135 UBOOT_HEAD_LEN); 136 if (off < 0) 137 printf("Failed to reserve memory for SD boot deep sleep: %s\n", 138 fdt_strerror(off)); 139 #endif 140 141 #if defined(CONFIG_FSL_ESDHC) 142 fdt_fixup_esdhc(blob, bd); 143 #endif 144 145 /* 146 * platform bus clock = system bus clock/2 147 * Here busclk = system bus clock 148 * We are using the platform bus clock as 1588 Timer reference 149 * clock source select 150 */ 151 do_fixup_by_compat_u32(blob, "fsl, gianfar-ptp-timer", 152 "timer-frequency", busclk / 2, 1); 153 154 /* 155 * clock-freq should change to clock-frequency and 156 * flexcan-v1.0 should change to p1010-flexcan respectively 157 * in the future. 158 */ 159 do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0", 160 "clock_freq", busclk / 2, 1); 161 162 do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0", 163 "clock-frequency", busclk / 2, 1); 164 165 do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan", 166 "clock-frequency", busclk / 2, 1); 167 168 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 169 off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT, 170 CONFIG_SYS_IFC_ADDR); 171 fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); 172 #else 173 off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT, 174 QSPI0_BASE_ADDR); 175 fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); 176 off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT, 177 DSPI1_BASE_ADDR); 178 fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); 179 #endif 180 } 181