1 /* 2 * Copyright 2013 Broadcom Corporation. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * 9 * bcm281xx architecture clock framework 10 * 11 */ 12 13 #include <common.h> 14 #include <asm/io.h> 15 #include <linux/errno.h> 16 #include <bitfield.h> 17 #include <asm/arch/sysmap.h> 18 #include <asm/kona-common/clk.h> 19 #include "clk-core.h" 20 21 #define CLK_WR_ACCESS_PASSWORD 0x00a5a501 22 #define WR_ACCESS_OFFSET 0 /* common to all clock blocks */ 23 #define POLICY_CTL_GO 1 /* Load and refresh policy masks */ 24 #define POLICY_CTL_GO_ATL 4 /* Active Load */ 25 26 /* Helper function */ 27 int clk_get_and_enable(char *clkstr) 28 { 29 int ret = 0; 30 struct clk *c; 31 32 debug("%s: %s\n", __func__, clkstr); 33 34 c = clk_get(clkstr); 35 if (c) { 36 ret = clk_enable(c); 37 if (ret) 38 return ret; 39 } else { 40 printf("%s: Couldn't find %s\n", __func__, clkstr); 41 return -EINVAL; 42 } 43 return ret; 44 } 45 46 /* 47 * Poll a register in a CCU's address space, returning when the 48 * specified bit in that register's value is set (or clear). Delay 49 * a microsecond after each read of the register. Returns true if 50 * successful, or false if we gave up trying. 51 * 52 * Caller must ensure the CCU lock is held. 53 */ 54 #define CLK_GATE_DELAY_USEC 2000 55 static inline int wait_bit(void *base, u32 offset, u32 bit, bool want) 56 { 57 unsigned int tries; 58 u32 bit_mask = 1 << bit; 59 60 for (tries = 0; tries < CLK_GATE_DELAY_USEC; tries++) { 61 u32 val; 62 bool bit_val; 63 64 val = readl(base + offset); 65 bit_val = (val & bit_mask) ? 1 : 0; 66 if (bit_val == want) 67 return 0; /* success */ 68 udelay(1); 69 } 70 71 debug("%s: timeout on addr 0x%p, waiting for bit %d to go to %d\n", 72 __func__, base + offset, bit, want); 73 74 return -ETIMEDOUT; 75 } 76 77 /* Enable a peripheral clock */ 78 static int peri_clk_enable(struct clk *c, int enable) 79 { 80 int ret = 0; 81 u32 reg; 82 struct peri_clock *peri_clk = to_peri_clk(c); 83 struct peri_clk_data *cd = peri_clk->data; 84 struct bcm_clk_gate *gate = &cd->gate; 85 void *base = (void *)c->ccu_clk_mgr_base; 86 87 88 debug("%s: %s\n", __func__, c->name); 89 90 clk_get_rate(c); /* Make sure rate and sel are filled in */ 91 92 /* enable access */ 93 writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET); 94 95 if (enable) { 96 debug("%s %s set rate %lu div %lu sel %d parent %lu\n", 97 __func__, c->name, c->rate, c->div, c->sel, 98 c->parent->rate); 99 100 /* 101 * clkgate - only software controllable gates are 102 * supported by u-boot which includes all clocks 103 * that matter. This avoids bringing in a lot of extra 104 * complexity as done in the kernel framework. 105 */ 106 if (gate_exists(gate)) { 107 reg = readl(base + cd->gate.offset); 108 reg |= (1 << cd->gate.en_bit); 109 writel(reg, base + cd->gate.offset); 110 } 111 112 /* div and pll select */ 113 if (divider_exists(&cd->div)) { 114 reg = readl(base + cd->div.offset); 115 bitfield_replace(reg, cd->div.shift, cd->div.width, 116 c->div - 1); 117 writel(reg, base + cd->div.offset); 118 } 119 120 /* frequency selector */ 121 if (selector_exists(&cd->sel)) { 122 reg = readl(base + cd->sel.offset); 123 bitfield_replace(reg, cd->sel.shift, cd->sel.width, 124 c->sel); 125 writel(reg, base + cd->sel.offset); 126 } 127 128 /* trigger */ 129 if (trigger_exists(&cd->trig)) { 130 writel((1 << cd->trig.bit), base + cd->trig.offset); 131 132 /* wait for trigger status bit to go to 0 */ 133 ret = wait_bit(base, cd->trig.offset, cd->trig.bit, 0); 134 if (ret) 135 return ret; 136 } 137 138 /* wait for running (status_bit = 1) */ 139 ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 1); 140 if (ret) 141 return ret; 142 } else { 143 debug("%s disable clock %s\n", __func__, c->name); 144 145 /* clkgate */ 146 reg = readl(base + cd->gate.offset); 147 reg &= ~(1 << cd->gate.en_bit); 148 writel(reg, base + cd->gate.offset); 149 150 /* wait for stop (status_bit = 0) */ 151 ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 0); 152 } 153 154 /* disable access */ 155 writel(0, base + WR_ACCESS_OFFSET); 156 157 return ret; 158 } 159 160 /* Set the rate of a peripheral clock */ 161 static int peri_clk_set_rate(struct clk *c, unsigned long rate) 162 { 163 int ret = 0; 164 int i; 165 unsigned long diff; 166 unsigned long new_rate = 0, div = 1; 167 struct peri_clock *peri_clk = to_peri_clk(c); 168 struct peri_clk_data *cd = peri_clk->data; 169 const char **clock; 170 171 debug("%s: %s\n", __func__, c->name); 172 diff = rate; 173 174 i = 0; 175 for (clock = cd->clocks; *clock; clock++, i++) { 176 struct refclk *ref = refclk_str_to_clk(*clock); 177 if (!ref) { 178 printf("%s: Lookup of %s failed\n", __func__, *clock); 179 return -EINVAL; 180 } 181 182 /* round to the new rate */ 183 div = ref->clk.rate / rate; 184 if (div == 0) 185 div = 1; 186 187 new_rate = ref->clk.rate / div; 188 189 /* get the min diff */ 190 if (abs(new_rate - rate) < diff) { 191 diff = abs(new_rate - rate); 192 c->sel = i; 193 c->parent = &ref->clk; 194 c->rate = new_rate; 195 c->div = div; 196 } 197 } 198 199 debug("%s %s set rate %lu div %lu sel %d parent %lu\n", __func__, 200 c->name, c->rate, c->div, c->sel, c->parent->rate); 201 return ret; 202 } 203 204 /* Get the rate of a peripheral clock */ 205 static unsigned long peri_clk_get_rate(struct clk *c) 206 { 207 struct peri_clock *peri_clk = to_peri_clk(c); 208 struct peri_clk_data *cd = peri_clk->data; 209 void *base = (void *)c->ccu_clk_mgr_base; 210 int div = 1; 211 const char **clock; 212 struct refclk *ref; 213 u32 reg; 214 215 debug("%s: %s\n", __func__, c->name); 216 if (selector_exists(&cd->sel)) { 217 reg = readl(base + cd->sel.offset); 218 c->sel = bitfield_extract(reg, cd->sel.shift, cd->sel.width); 219 } else { 220 /* 221 * For peri clocks that don't have a selector, the single 222 * reference clock will always exist at index 0. 223 */ 224 c->sel = 0; 225 } 226 227 if (divider_exists(&cd->div)) { 228 reg = readl(base + cd->div.offset); 229 div = bitfield_extract(reg, cd->div.shift, cd->div.width); 230 div += 1; 231 } 232 233 clock = cd->clocks; 234 ref = refclk_str_to_clk(clock[c->sel]); 235 if (!ref) { 236 printf("%s: Can't lookup %s\n", __func__, clock[c->sel]); 237 return 0; 238 } 239 240 c->parent = &ref->clk; 241 c->div = div; 242 c->rate = c->parent->rate / c->div; 243 debug("%s parent rate %lu div %d sel %d rate %lu\n", __func__, 244 c->parent->rate, div, c->sel, c->rate); 245 246 return c->rate; 247 } 248 249 /* Peripheral clock operations */ 250 struct clk_ops peri_clk_ops = { 251 .enable = peri_clk_enable, 252 .set_rate = peri_clk_set_rate, 253 .get_rate = peri_clk_get_rate, 254 }; 255 256 /* Enable a CCU clock */ 257 static int ccu_clk_enable(struct clk *c, int enable) 258 { 259 struct ccu_clock *ccu_clk = to_ccu_clk(c); 260 void *base = (void *)c->ccu_clk_mgr_base; 261 int ret = 0; 262 u32 reg; 263 264 debug("%s: %s\n", __func__, c->name); 265 if (!enable) 266 return -EINVAL; /* CCU clock cannot shutdown */ 267 268 /* enable access */ 269 writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET); 270 271 /* config enable for policy engine */ 272 writel(1, base + ccu_clk->lvm_en_offset); 273 274 /* wait for bit to go to 0 */ 275 ret = wait_bit(base, ccu_clk->lvm_en_offset, 0, 0); 276 if (ret) 277 return ret; 278 279 /* freq ID */ 280 if (!ccu_clk->freq_bit_shift) 281 ccu_clk->freq_bit_shift = 8; 282 283 /* Set frequency id for each of the 4 policies */ 284 reg = ccu_clk->freq_id | 285 (ccu_clk->freq_id << (ccu_clk->freq_bit_shift)) | 286 (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 2)) | 287 (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 3)); 288 writel(reg, base + ccu_clk->policy_freq_offset); 289 290 /* enable all clock mask */ 291 writel(0x7fffffff, base + ccu_clk->policy0_mask_offset); 292 writel(0x7fffffff, base + ccu_clk->policy1_mask_offset); 293 writel(0x7fffffff, base + ccu_clk->policy2_mask_offset); 294 writel(0x7fffffff, base + ccu_clk->policy3_mask_offset); 295 296 if (ccu_clk->num_policy_masks == 2) { 297 writel(0x7fffffff, base + ccu_clk->policy0_mask2_offset); 298 writel(0x7fffffff, base + ccu_clk->policy1_mask2_offset); 299 writel(0x7fffffff, base + ccu_clk->policy2_mask2_offset); 300 writel(0x7fffffff, base + ccu_clk->policy3_mask2_offset); 301 } 302 303 /* start policy engine */ 304 reg = readl(base + ccu_clk->policy_ctl_offset); 305 reg |= (POLICY_CTL_GO + POLICY_CTL_GO_ATL); 306 writel(reg, base + ccu_clk->policy_ctl_offset); 307 308 /* wait till started */ 309 ret = wait_bit(base, ccu_clk->policy_ctl_offset, 0, 0); 310 if (ret) 311 return ret; 312 313 /* disable access */ 314 writel(0, base + WR_ACCESS_OFFSET); 315 316 return ret; 317 } 318 319 /* Get the CCU clock rate */ 320 static unsigned long ccu_clk_get_rate(struct clk *c) 321 { 322 struct ccu_clock *ccu_clk = to_ccu_clk(c); 323 debug("%s: %s\n", __func__, c->name); 324 c->rate = ccu_clk->freq_tbl[ccu_clk->freq_id]; 325 return c->rate; 326 } 327 328 /* CCU clock operations */ 329 struct clk_ops ccu_clk_ops = { 330 .enable = ccu_clk_enable, 331 .get_rate = ccu_clk_get_rate, 332 }; 333 334 /* Enable a bus clock */ 335 static int bus_clk_enable(struct clk *c, int enable) 336 { 337 struct bus_clock *bus_clk = to_bus_clk(c); 338 struct bus_clk_data *cd = bus_clk->data; 339 void *base = (void *)c->ccu_clk_mgr_base; 340 int ret = 0; 341 u32 reg; 342 343 debug("%s: %s\n", __func__, c->name); 344 /* enable access */ 345 writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET); 346 347 /* enable gating */ 348 reg = readl(base + cd->gate.offset); 349 if (!!(reg & (1 << cd->gate.status_bit)) == !!enable) 350 debug("%s already %s\n", c->name, 351 enable ? "enabled" : "disabled"); 352 else { 353 int want = (enable) ? 1 : 0; 354 reg |= (1 << cd->gate.hw_sw_sel_bit); 355 356 if (enable) 357 reg |= (1 << cd->gate.en_bit); 358 else 359 reg &= ~(1 << cd->gate.en_bit); 360 361 writel(reg, base + cd->gate.offset); 362 ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 363 want); 364 if (ret) 365 return ret; 366 } 367 368 /* disable access */ 369 writel(0, base + WR_ACCESS_OFFSET); 370 371 return ret; 372 } 373 374 /* Get the rate of a bus clock */ 375 static unsigned long bus_clk_get_rate(struct clk *c) 376 { 377 struct bus_clock *bus_clk = to_bus_clk(c); 378 struct ccu_clock *ccu_clk; 379 380 debug("%s: %s\n", __func__, c->name); 381 ccu_clk = to_ccu_clk(c->parent); 382 383 c->rate = bus_clk->freq_tbl[ccu_clk->freq_id]; 384 c->div = ccu_clk->freq_tbl[ccu_clk->freq_id] / c->rate; 385 return c->rate; 386 } 387 388 /* Bus clock operations */ 389 struct clk_ops bus_clk_ops = { 390 .enable = bus_clk_enable, 391 .get_rate = bus_clk_get_rate, 392 }; 393 394 /* Enable a reference clock */ 395 static int ref_clk_enable(struct clk *c, int enable) 396 { 397 debug("%s: %s\n", __func__, c->name); 398 return 0; 399 } 400 401 /* Reference clock operations */ 402 struct clk_ops ref_clk_ops = { 403 .enable = ref_clk_enable, 404 }; 405 406 /* 407 * clk.h implementation follows 408 */ 409 410 /* Initialize the clock framework */ 411 int clk_init(void) 412 { 413 debug("%s:\n", __func__); 414 return 0; 415 } 416 417 /* Get a clock handle, give a name string */ 418 struct clk *clk_get(const char *con_id) 419 { 420 int i; 421 struct clk_lookup *clk_tblp; 422 423 debug("%s: %s\n", __func__, con_id); 424 425 clk_tblp = arch_clk_tbl; 426 for (i = 0; i < arch_clk_tbl_array_size; i++, clk_tblp++) { 427 if (clk_tblp->con_id) { 428 if (!con_id || strcmp(clk_tblp->con_id, con_id)) 429 continue; 430 return clk_tblp->clk; 431 } 432 } 433 return NULL; 434 } 435 436 /* Enable a clock */ 437 int clk_enable(struct clk *c) 438 { 439 int ret = 0; 440 441 debug("%s: %s\n", __func__, c->name); 442 if (!c->ops || !c->ops->enable) 443 return -1; 444 445 /* enable parent clock first */ 446 if (c->parent) 447 ret = clk_enable(c->parent); 448 449 if (ret) 450 return ret; 451 452 if (!c->use_cnt) { 453 c->use_cnt++; 454 ret = c->ops->enable(c, 1); 455 } 456 457 return ret; 458 } 459 460 /* Disable a clock */ 461 void clk_disable(struct clk *c) 462 { 463 debug("%s: %s\n", __func__, c->name); 464 if (!c->ops || !c->ops->enable) 465 return; 466 467 if (c->use_cnt) { 468 c->use_cnt--; 469 c->ops->enable(c, 0); 470 } 471 472 /* disable parent */ 473 if (c->parent) 474 clk_disable(c->parent); 475 } 476 477 /* Get the clock rate */ 478 unsigned long clk_get_rate(struct clk *c) 479 { 480 unsigned long rate; 481 482 debug("%s: %s\n", __func__, c->name); 483 if (!c || !c->ops || !c->ops->get_rate) 484 return 0; 485 486 rate = c->ops->get_rate(c); 487 debug("%s: rate = %ld\n", __func__, rate); 488 return rate; 489 } 490 491 /* Set the clock rate */ 492 int clk_set_rate(struct clk *c, unsigned long rate) 493 { 494 int ret; 495 496 debug("%s: %s rate=%ld\n", __func__, c->name, rate); 497 if (!c || !c->ops || !c->ops->set_rate) 498 return -EINVAL; 499 500 if (c->use_cnt) 501 return -EINVAL; 502 503 ret = c->ops->set_rate(c, rate); 504 505 return ret; 506 } 507 508 /* Not required for this arch */ 509 /* 510 long clk_round_rate(struct clk *clk, unsigned long rate); 511 int clk_set_parent(struct clk *clk, struct clk *parent); 512 struct clk *clk_get_parent(struct clk *clk); 513 */ 514