xref: /openbmc/u-boot/arch/arm/cpu/arm926ejs/spear/timer.c (revision 382bee57)
1 /*
2  * (C) Copyright 2009
3  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch/hardware.h>
11 #include <asm/arch/spr_gpt.h>
12 #include <asm/arch/spr_misc.h>
13 
14 #define GPT_RESOLUTION	(CONFIG_SPEAR_HZ_CLOCK / CONFIG_SPEAR_HZ)
15 #define READ_TIMER()	(readl(&gpt_regs_p->count) & GPT_FREE_RUNNING)
16 
17 static struct gpt_regs *const gpt_regs_p =
18     (struct gpt_regs *)CONFIG_SPEAR_TIMERBASE;
19 
20 static struct misc_regs *const misc_regs_p =
21     (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
22 
23 DECLARE_GLOBAL_DATA_PTR;
24 
25 #define timestamp gd->arch.tbl
26 #define lastdec gd->arch.lastinc
27 
28 int timer_init(void)
29 {
30 	u32 synth;
31 
32 	/* Prescaler setting */
33 #if defined(CONFIG_SPEAR3XX)
34 	writel(MISC_PRSC_CFG, &misc_regs_p->prsc2_clk_cfg);
35 	synth = MISC_GPT4SYNTH;
36 #elif defined(CONFIG_SPEAR600)
37 	writel(MISC_PRSC_CFG, &misc_regs_p->prsc1_clk_cfg);
38 	synth = MISC_GPT3SYNTH;
39 #else
40 # error Incorrect config. Can only be SPEAR{600|300|310|320}
41 #endif
42 
43 	writel(readl(&misc_regs_p->periph_clk_cfg) | synth,
44 	       &misc_regs_p->periph_clk_cfg);
45 
46 	/* disable timers */
47 	writel(GPT_PRESCALER_1 | GPT_MODE_AUTO_RELOAD, &gpt_regs_p->control);
48 
49 	/* load value for free running */
50 	writel(GPT_FREE_RUNNING, &gpt_regs_p->compare);
51 
52 	/* auto reload, start timer */
53 	writel(readl(&gpt_regs_p->control) | GPT_ENABLE, &gpt_regs_p->control);
54 
55 	/* Reset the timer */
56 	lastdec = READ_TIMER();
57 	timestamp = 0;
58 
59 	return 0;
60 }
61 
62 /*
63  * timer without interrupts
64  */
65 ulong get_timer(ulong base)
66 {
67 	return (get_timer_masked() / GPT_RESOLUTION) - base;
68 }
69 
70 void __udelay(unsigned long usec)
71 {
72 	ulong tmo;
73 	ulong start = get_timer_masked();
74 	ulong tenudelcnt = CONFIG_SPEAR_HZ_CLOCK / (1000 * 100);
75 	ulong rndoff;
76 
77 	rndoff = (usec % 10) ? 1 : 0;
78 
79 	/* tenudelcnt timer tick gives 10 microsecconds delay */
80 	tmo = ((usec / 10) + rndoff) * tenudelcnt;
81 
82 	while ((ulong) (get_timer_masked() - start) < tmo)
83 		;
84 }
85 
86 ulong get_timer_masked(void)
87 {
88 	ulong now = READ_TIMER();
89 
90 	if (now >= lastdec) {
91 		/* normal mode */
92 		timestamp += now - lastdec;
93 	} else {
94 		/* we have an overflow ... */
95 		timestamp += now + GPT_FREE_RUNNING - lastdec;
96 	}
97 	lastdec = now;
98 
99 	return timestamp;
100 }
101 
102 void udelay_masked(unsigned long usec)
103 {
104 	return udelay(usec);
105 }
106 
107 /*
108  * This function is derived from PowerPC code (read timebase as long long).
109  * On ARM it just returns the timer value.
110  */
111 unsigned long long get_ticks(void)
112 {
113 	return get_timer(0);
114 }
115 
116 /*
117  * This function is derived from PowerPC code (timebase clock frequency).
118  * On ARM it returns the number of timer ticks per second.
119  */
120 ulong get_tbclk(void)
121 {
122 	return CONFIG_SPEAR_HZ;
123 }
124