xref: /openbmc/u-boot/arch/arm/cpu/arm926ejs/spear/timer.c (revision 32cd2512)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2009
4  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
5  */
6 
7 #include <common.h>
8 #include <asm/io.h>
9 #include <asm/arch/hardware.h>
10 #include <asm/arch/spr_gpt.h>
11 #include <asm/arch/spr_misc.h>
12 
13 #define GPT_RESOLUTION	(CONFIG_SPEAR_HZ_CLOCK / CONFIG_SPEAR_HZ)
14 #define READ_TIMER()	(readl(&gpt_regs_p->count) & GPT_FREE_RUNNING)
15 
16 static struct gpt_regs *const gpt_regs_p =
17     (struct gpt_regs *)CONFIG_SPEAR_TIMERBASE;
18 
19 static struct misc_regs *const misc_regs_p =
20     (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
21 
22 DECLARE_GLOBAL_DATA_PTR;
23 
24 #define timestamp gd->arch.tbl
25 #define lastdec gd->arch.lastinc
26 
27 int timer_init(void)
28 {
29 	u32 synth;
30 
31 	/* Prescaler setting */
32 #if defined(CONFIG_SPEAR3XX)
33 	writel(MISC_PRSC_CFG, &misc_regs_p->prsc2_clk_cfg);
34 	synth = MISC_GPT4SYNTH;
35 #elif defined(CONFIG_SPEAR600)
36 	writel(MISC_PRSC_CFG, &misc_regs_p->prsc1_clk_cfg);
37 	synth = MISC_GPT3SYNTH;
38 #else
39 # error Incorrect config. Can only be SPEAR{600|300|310|320}
40 #endif
41 
42 	writel(readl(&misc_regs_p->periph_clk_cfg) | synth,
43 	       &misc_regs_p->periph_clk_cfg);
44 
45 	/* disable timers */
46 	writel(GPT_PRESCALER_1 | GPT_MODE_AUTO_RELOAD, &gpt_regs_p->control);
47 
48 	/* load value for free running */
49 	writel(GPT_FREE_RUNNING, &gpt_regs_p->compare);
50 
51 	/* auto reload, start timer */
52 	writel(readl(&gpt_regs_p->control) | GPT_ENABLE, &gpt_regs_p->control);
53 
54 	/* Reset the timer */
55 	lastdec = READ_TIMER();
56 	timestamp = 0;
57 
58 	return 0;
59 }
60 
61 /*
62  * timer without interrupts
63  */
64 ulong get_timer(ulong base)
65 {
66 	return (get_timer_masked() / GPT_RESOLUTION) - base;
67 }
68 
69 void __udelay(unsigned long usec)
70 {
71 	ulong tmo;
72 	ulong start = get_timer_masked();
73 	ulong tenudelcnt = CONFIG_SPEAR_HZ_CLOCK / (1000 * 100);
74 	ulong rndoff;
75 
76 	rndoff = (usec % 10) ? 1 : 0;
77 
78 	/* tenudelcnt timer tick gives 10 microsecconds delay */
79 	tmo = ((usec / 10) + rndoff) * tenudelcnt;
80 
81 	while ((ulong) (get_timer_masked() - start) < tmo)
82 		;
83 }
84 
85 ulong get_timer_masked(void)
86 {
87 	ulong now = READ_TIMER();
88 
89 	if (now >= lastdec) {
90 		/* normal mode */
91 		timestamp += now - lastdec;
92 	} else {
93 		/* we have an overflow ... */
94 		timestamp += now + GPT_FREE_RUNNING - lastdec;
95 	}
96 	lastdec = now;
97 
98 	return timestamp;
99 }
100 
101 void udelay_masked(unsigned long usec)
102 {
103 	return udelay(usec);
104 }
105 
106 /*
107  * This function is derived from PowerPC code (read timebase as long long).
108  * On ARM it just returns the timer value.
109  */
110 unsigned long long get_ticks(void)
111 {
112 	return get_timer(0);
113 }
114 
115 /*
116  * This function is derived from PowerPC code (timebase clock frequency).
117  * On ARM it returns the number of timer ticks per second.
118  */
119 ulong get_tbclk(void)
120 {
121 	return CONFIG_SPEAR_HZ;
122 }
123