1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2009 4 * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <environment.h> 10 #include <i2c.h> 11 #include <net.h> 12 #include <linux/mtd/st_smi.h> 13 #include <asm/io.h> 14 #include <asm/arch/hardware.h> 15 #include <asm/arch/spr_emi.h> 16 #include <asm/arch/spr_defs.h> 17 18 #define CPU 0 19 #define DDR 1 20 #define SRAM_REL 0xD2801000 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 #if defined(CONFIG_CMD_NET) 25 static int i2c_read_mac(uchar *buffer); 26 #endif 27 28 int dram_init(void) 29 { 30 /* Store complete RAM size and return */ 31 gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE); 32 33 return 0; 34 } 35 36 int dram_init_banksize(void) 37 { 38 gd->bd->bi_dram[0].start = PHYS_SDRAM_1; 39 gd->bd->bi_dram[0].size = gd->ram_size; 40 41 return 0; 42 } 43 44 int board_early_init_f() 45 { 46 #if defined(CONFIG_ST_SMI) 47 smi_init(); 48 #endif 49 return 0; 50 } 51 int misc_init_r(void) 52 { 53 #if defined(CONFIG_CMD_NET) 54 uchar mac_id[6]; 55 56 if (!eth_env_get_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id)) 57 eth_env_set_enetaddr("ethaddr", mac_id); 58 #endif 59 env_set("verify", "n"); 60 61 #if defined(CONFIG_SPEAR_USBTTY) 62 env_set("stdin", "usbtty"); 63 env_set("stdout", "usbtty"); 64 env_set("stderr", "usbtty"); 65 66 #ifndef CONFIG_SYS_NO_DCACHE 67 dcache_enable(); 68 #endif 69 #endif 70 return 0; 71 } 72 73 #ifdef CONFIG_SPEAR_EMI 74 struct cust_emi_para { 75 unsigned int tap; 76 unsigned int tsdp; 77 unsigned int tdpw; 78 unsigned int tdpr; 79 unsigned int tdcs; 80 }; 81 82 /* EMI timing setting of m28w640hc of linux kernel */ 83 const struct cust_emi_para emi_timing_m28w640hc = { 84 .tap = 0x10, 85 .tsdp = 0x05, 86 .tdpw = 0x0a, 87 .tdpr = 0x0a, 88 .tdcs = 0x05, 89 }; 90 91 /* EMI timing setting of bootrom */ 92 const struct cust_emi_para emi_timing_bootrom = { 93 .tap = 0xf, 94 .tsdp = 0x0, 95 .tdpw = 0xff, 96 .tdpr = 0x111, 97 .tdcs = 0x02, 98 }; 99 100 void spear_emi_init(void) 101 { 102 const struct cust_emi_para *p = &emi_timing_m28w640hc; 103 struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE; 104 unsigned int cs; 105 unsigned int val, tmp; 106 107 val = readl(CONFIG_SPEAR_RASBASE); 108 109 if (val & EMI_ACKMSK) 110 tmp = 0x3f; 111 else 112 tmp = 0x0; 113 114 writel(tmp, &emi_regs_p->ack); 115 116 for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) { 117 writel(p->tap, &emi_regs_p->bank_regs[cs].tap); 118 writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp); 119 writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw); 120 writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr); 121 writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs); 122 writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3), 123 &emi_regs_p->bank_regs[cs].control); 124 } 125 } 126 #endif 127 128 int spear_board_init(ulong mach_type) 129 { 130 gd->bd->bi_arch_number = mach_type; 131 132 /* adress of boot parameters */ 133 gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR; 134 135 #ifdef CONFIG_SPEAR_EMI 136 spear_emi_init(); 137 #endif 138 return 0; 139 } 140 141 #if defined(CONFIG_CMD_NET) 142 static int i2c_read_mac(uchar *buffer) 143 { 144 u8 buf[2]; 145 146 i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); 147 148 /* Check if mac in i2c memory is valid */ 149 if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) { 150 /* Valid mac address is saved in i2c eeprom */ 151 i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN); 152 return 0; 153 } 154 155 return -1; 156 } 157 158 static int write_mac(uchar *mac) 159 { 160 u8 buf[2]; 161 162 buf[0] = (u8)MAGIC_BYTE0; 163 buf[1] = (u8)MAGIC_BYTE1; 164 i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); 165 166 buf[0] = (u8)~MAGIC_BYTE0; 167 buf[1] = (u8)~MAGIC_BYTE1; 168 169 i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); 170 171 /* check if valid MAC address is saved in I2C EEPROM or not? */ 172 if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) { 173 i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN); 174 puts("I2C EEPROM written with mac address \n"); 175 return 0; 176 } 177 178 puts("I2C EEPROM writing failed\n"); 179 return -1; 180 } 181 #endif 182 183 int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 184 { 185 void (*sram_setfreq) (unsigned int, unsigned int); 186 unsigned int frequency; 187 #if defined(CONFIG_CMD_NET) 188 unsigned char mac[6]; 189 #endif 190 191 if ((argc > 3) || (argc < 2)) 192 return cmd_usage(cmdtp); 193 194 if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) { 195 196 frequency = simple_strtoul(argv[2], NULL, 0); 197 198 if (frequency > 333) { 199 printf("Frequency is limited to 333MHz\n"); 200 return 1; 201 } 202 203 sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz); 204 205 if (!strcmp(argv[1], "cpufreq")) { 206 sram_setfreq(CPU, frequency); 207 printf("CPU frequency changed to %u\n", frequency); 208 } else { 209 sram_setfreq(DDR, frequency); 210 printf("DDR frequency changed to %u\n", frequency); 211 } 212 213 return 0; 214 215 #if defined(CONFIG_CMD_NET) 216 } else if (!strcmp(argv[1], "ethaddr")) { 217 218 u32 reg; 219 char *e, *s = argv[2]; 220 for (reg = 0; reg < 6; ++reg) { 221 mac[reg] = s ? simple_strtoul(s, &e, 16) : 0; 222 if (s) 223 s = (*e) ? e + 1 : e; 224 } 225 write_mac(mac); 226 227 return 0; 228 #endif 229 } else if (!strcmp(argv[1], "print")) { 230 #if defined(CONFIG_CMD_NET) 231 if (!i2c_read_mac(mac)) { 232 printf("Ethaddr (from i2c mem) = %pM\n", mac); 233 } else { 234 printf("Ethaddr (from i2c mem) = Not set\n"); 235 } 236 #endif 237 return 0; 238 } 239 240 return cmd_usage(cmdtp); 241 } 242 243 U_BOOT_CMD(chip_config, 3, 1, do_chip_config, 244 "configure chip", 245 "chip_config cpufreq/ddrfreq frequency\n" 246 #if defined(CONFIG_CMD_NET) 247 "chip_config ethaddr XX:XX:XX:XX:XX:XX\n" 248 #endif 249 "chip_config print"); 250