1/* 2 * armboot - Startup Code for ARM926EJS CPU-core 3 * 4 * Copyright (c) 2003 Texas Instruments 5 * 6 * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------ 7 * 8 * Copyright (c) 2001 Marius Groger <mag@sysgo.de> 9 * Copyright (c) 2002 Alex Zupke <azu@sysgo.de> 10 * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> 11 * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> 12 * Copyright (c) 2003 Kshitij <kshitij@ti.com> 13 * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net> 14 * 15 * Change to support call back into iMX28 bootrom 16 * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com> 17 * on behalf of DENX Software Engineering GmbH 18 * 19 * See file CREDITS for list of people who contributed to this 20 * project. 21 * 22 * This program is free software; you can redistribute it and/or 23 * modify it under the terms of the GNU General Public License as 24 * published by the Free Software Foundation; either version 2 of 25 * the License, or (at your option) any later version. 26 * 27 * This program is distributed in the hope that it will be useful, 28 * but WITHOUT ANY WARRANTY; without even the implied warranty of 29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 30 * GNU General Public License for more details. 31 * 32 * You should have received a copy of the GNU General Public License 33 * along with this program; if not, write to the Free Software 34 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 35 * MA 02111-1307 USA 36 */ 37 38#include <asm-offsets.h> 39#include <config.h> 40#include <common.h> 41#include <version.h> 42 43/* 44 ************************************************************************* 45 * 46 * Jump vector table as in table 3.1 in [1] 47 * 48 ************************************************************************* 49 */ 50 51 52.globl _start 53_start: 54 b reset 55 b undefined_instruction 56 b software_interrupt 57 b prefetch_abort 58 b data_abort 59 b not_used 60 b irq 61 b fiq 62 63/* 64 * Vector table, located at address 0x20. 65 * This table allows the code running AFTER SPL, the U-Boot, to install it's 66 * interrupt handlers here. The problem is that the U-Boot is loaded into RAM, 67 * including it's interrupt vectoring table and the table at 0x0 is still the 68 * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table 69 * is still used. 70 */ 71_vt_reset: 72 .word _reset 73_vt_undefined_instruction: 74 .word _hang 75_vt_software_interrupt: 76 .word _hang 77_vt_prefetch_abort: 78 .word _hang 79_vt_data_abort: 80 .word _hang 81_vt_not_used: 82 .word _reset 83_vt_irq: 84 .word _hang 85_vt_fiq: 86 .word _hang 87 88reset: 89 ldr pc, _vt_reset 90undefined_instruction: 91 ldr pc, _vt_undefined_instruction 92software_interrupt: 93 ldr pc, _vt_software_interrupt 94prefetch_abort: 95 ldr pc, _vt_prefetch_abort 96data_abort: 97 ldr pc, _vt_data_abort 98not_used: 99 ldr pc, _vt_not_used 100irq: 101 ldr pc, _vt_irq 102fiq: 103 ldr pc, _vt_fiq 104 105 .balignl 16,0xdeadbeef 106 107/* 108 ************************************************************************* 109 * 110 * Startup Code (reset vector) 111 * 112 * do important init only if we don't start from memory! 113 * setup Memory and board specific bits prior to relocation. 114 * relocate armboot to ram 115 * setup stack 116 * 117 ************************************************************************* 118 */ 119 120.globl _TEXT_BASE 121_TEXT_BASE: 122 .word CONFIG_SYS_TEXT_BASE 123 124/* 125 * These are defined in the board-specific linker script. 126 * Subtracting _start from them lets the linker put their 127 * relative position in the executable instead of leaving 128 * them null. 129 */ 130.globl _bss_start_ofs 131_bss_start_ofs: 132 .word __bss_start - _start 133 134.globl _bss_end_ofs 135_bss_end_ofs: 136 .word __bss_end__ - _start 137 138.globl _end_ofs 139_end_ofs: 140 .word _end - _start 141 142#ifdef CONFIG_USE_IRQ 143/* IRQ stack memory (calculated at run-time) */ 144.globl IRQ_STACK_START 145IRQ_STACK_START: 146 .word 0x0badc0de 147 148/* IRQ stack memory (calculated at run-time) */ 149.globl FIQ_STACK_START 150FIQ_STACK_START: 151 .word 0x0badc0de 152#endif 153 154/* IRQ stack memory (calculated at run-time) + 8 bytes */ 155.globl IRQ_STACK_START_IN 156IRQ_STACK_START_IN: 157 .word 0x0badc0de 158 159/* 160 * the actual reset code 161 */ 162 163_reset: 164 /* 165 * Store all registers on old stack pointer, this will allow us later to 166 * return to the BootROM and let the BootROM load U-Boot into RAM. 167 */ 168 push {r0-r12,r14} 169 170 /* save control register c1 */ 171 mrc p15, 0, r0, c1, c0, 0 172 push {r0} 173 174 /* 175 * set the cpu to SVC32 mode and store old CPSR register content 176 */ 177 mrs r0,cpsr 178 push {r0} 179 bic r0,r0,#0x1f 180 orr r0,r0,#0xd3 181 msr cpsr,r0 182 183 bl board_init_ll 184 185 /* 186 * restore bootrom's cpu mode (especially FIQ) 187 */ 188 pop {r0} 189 msr cpsr,r0 190 191 /* 192 * restore c1 register 193 * (especially set exception vector location back to 194 * bootrom space which is required by bootrom for USB boot) 195 */ 196 pop {r0} 197 mcr p15, 0, r0, c1, c0, 0 198 199 pop {r0-r12,r14} 200 bx lr 201 202_hang: 203 ldr sp, _TEXT_BASE /* switch to abort stack */ 2041: 205 bl 1b /* hang and never return */ 206