1 /*
2  *  Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
3  *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <div64.h>
10 #include <netdev.h>
11 #include <asm/io.h>
12 #include <asm/arch/imx-regs.h>
13 #include <asm/arch/clock.h>
14 #include <asm/arch/gpio.h>
15 #include <asm/mach-imx/sys_proto.h>
16 #ifdef CONFIG_MMC_MXC
17 #include <asm/arch/mxcmmc.h>
18 #endif
19 
20 /*
21  *  get the system pll clock in Hz
22  *
23  *                  mfi + mfn / (mfd +1)
24  *  f = 2 * f_ref * --------------------
25  *                        pd + 1
26  */
27 static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
28 {
29 	unsigned int mfi = (pll >> 10) & 0xf;
30 	unsigned int mfn = pll & 0x3ff;
31 	unsigned int mfd = (pll >> 16) & 0x3ff;
32 	unsigned int pd =  (pll >> 26) & 0xf;
33 
34 	mfi = mfi <= 5 ? 5 : mfi;
35 
36 	return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
37 			(mfd + 1) * (pd + 1));
38 }
39 
40 static ulong clk_in_32k(void)
41 {
42 	return 1024 * CONFIG_MX27_CLK32;
43 }
44 
45 static ulong clk_in_26m(void)
46 {
47 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
48 
49 	if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) {
50 		/* divide by 1.5 */
51 		return 26000000 * 2 / 3;
52 	} else {
53 		return 26000000;
54 	}
55 }
56 
57 static ulong imx_get_mpllclk(void)
58 {
59 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
60 	ulong cscr = readl(&pll->cscr);
61 	ulong fref;
62 
63 	if (cscr & CSCR_MCU_SEL)
64 		fref = clk_in_26m();
65 	else
66 		fref = clk_in_32k();
67 
68 	return imx_decode_pll(readl(&pll->mpctl0), fref);
69 }
70 
71 static ulong imx_get_armclk(void)
72 {
73 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
74 	ulong cscr = readl(&pll->cscr);
75 	ulong fref = imx_get_mpllclk();
76 	ulong div;
77 
78 	if (!(cscr & CSCR_ARM_SRC_MPLL))
79 		fref = lldiv((fref * 2), 3);
80 
81 	div = ((cscr >> 12) & 0x3) + 1;
82 
83 	return lldiv(fref, div);
84 }
85 
86 static ulong imx_get_ahbclk(void)
87 {
88 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
89 	ulong cscr = readl(&pll->cscr);
90 	ulong fref = imx_get_mpllclk();
91 	ulong div;
92 
93 	div = ((cscr >> 8) & 0x3) + 1;
94 
95 	return lldiv(fref * 2, 3 * div);
96 }
97 
98 static __attribute__((unused)) ulong imx_get_spllclk(void)
99 {
100 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
101 	ulong cscr = readl(&pll->cscr);
102 	ulong fref;
103 
104 	if (cscr & CSCR_SP_SEL)
105 		fref = clk_in_26m();
106 	else
107 		fref = clk_in_32k();
108 
109 	return imx_decode_pll(readl(&pll->spctl0), fref);
110 }
111 
112 static ulong imx_decode_perclk(ulong div)
113 {
114 	return lldiv((imx_get_mpllclk() * 2), (div * 3));
115 }
116 
117 static ulong imx_get_perclk1(void)
118 {
119 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
120 
121 	return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1);
122 }
123 
124 static ulong imx_get_perclk2(void)
125 {
126 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
127 
128 	return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1);
129 }
130 
131 static __attribute__((unused)) ulong imx_get_perclk3(void)
132 {
133 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
134 
135 	return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1);
136 }
137 
138 static __attribute__((unused)) ulong imx_get_perclk4(void)
139 {
140 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
141 
142 	return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
143 }
144 
145 unsigned int mxc_get_clock(enum mxc_clock clk)
146 {
147 	switch (clk) {
148 	case MXC_ARM_CLK:
149 		return imx_get_armclk();
150 	case MXC_I2C_CLK:
151 		return imx_get_ahbclk()/2;
152 	case MXC_UART_CLK:
153 		return imx_get_perclk1();
154 	case MXC_FEC_CLK:
155 		return imx_get_ahbclk();
156 	case MXC_ESDHC_CLK:
157 		return imx_get_perclk2();
158 	}
159 	return -1;
160 }
161 
162 
163 u32 get_cpu_rev(void)
164 {
165 	return MXC_CPU_MX27 << 12;
166 }
167 
168 #if defined(CONFIG_DISPLAY_CPUINFO)
169 int print_cpuinfo (void)
170 {
171 	char buf[32];
172 
173 	printf("CPU:   Freescale i.MX27 at %s MHz\n\n",
174 			strmhz(buf, imx_get_mpllclk()));
175 	return 0;
176 }
177 #endif
178 
179 int cpu_eth_init(bd_t *bis)
180 {
181 #if defined(CONFIG_FEC_MXC)
182 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
183 
184 	/* enable FEC clock */
185 	writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
186 	writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
187 	return fecmxc_initialize(bis);
188 #else
189 	return 0;
190 #endif
191 }
192 
193 /*
194  * Initializes on-chip MMC controllers.
195  * to override, implement board_mmc_init()
196  */
197 int cpu_mmc_init(bd_t *bis)
198 {
199 #ifdef CONFIG_MMC_MXC
200 	return mxc_mmc_init(bis);
201 #else
202 	return 0;
203 #endif
204 }
205 
206 void imx_gpio_mode(int gpio_mode)
207 {
208 	struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE;
209 	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
210 	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
211 	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
212 	unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
213 	unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
214 	unsigned int tmp;
215 
216 	/* Pullup enable */
217 	if (gpio_mode & GPIO_PUEN) {
218 		writel(readl(&regs->port[port].puen) | (1 << pin),
219 				&regs->port[port].puen);
220 	} else {
221 		writel(readl(&regs->port[port].puen) & ~(1 << pin),
222 				&regs->port[port].puen);
223 	}
224 
225 	/* Data direction */
226 	if (gpio_mode & GPIO_OUT) {
227 		writel(readl(&regs->port[port].gpio_dir) | 1 << pin,
228 				&regs->port[port].gpio_dir);
229 	} else {
230 		writel(readl(&regs->port[port].gpio_dir) & ~(1 << pin),
231 				&regs->port[port].gpio_dir);
232 	}
233 
234 	/* Primary / alternate function */
235 	if (gpio_mode & GPIO_AF) {
236 		writel(readl(&regs->port[port].gpr) | (1 << pin),
237 				&regs->port[port].gpr);
238 	} else {
239 		writel(readl(&regs->port[port].gpr) & ~(1 << pin),
240 				&regs->port[port].gpr);
241 	}
242 
243 	/* use as gpio? */
244 	if (!(gpio_mode & (GPIO_PF | GPIO_AF))) {
245 		writel(readl(&regs->port[port].gius) | (1 << pin),
246 				&regs->port[port].gius);
247 	} else {
248 		writel(readl(&regs->port[port].gius) & ~(1 << pin),
249 				&regs->port[port].gius);
250 	}
251 
252 	/* Output / input configuration */
253 	if (pin < 16) {
254 		tmp = readl(&regs->port[port].ocr1);
255 		tmp &= ~(3 << (pin * 2));
256 		tmp |= (ocr << (pin * 2));
257 		writel(tmp, &regs->port[port].ocr1);
258 
259 		writel(readl(&regs->port[port].iconfa1) & ~(3 << (pin * 2)),
260 				&regs->port[port].iconfa1);
261 		writel(readl(&regs->port[port].iconfa1) | aout << (pin * 2),
262 				&regs->port[port].iconfa1);
263 		writel(readl(&regs->port[port].iconfb1) & ~(3 << (pin * 2)),
264 				&regs->port[port].iconfb1);
265 		writel(readl(&regs->port[port].iconfb1) | bout << (pin * 2),
266 				&regs->port[port].iconfb1);
267 	} else {
268 		pin -= 16;
269 
270 		tmp = readl(&regs->port[port].ocr2);
271 		tmp &= ~(3 << (pin * 2));
272 		tmp |= (ocr << (pin * 2));
273 		writel(tmp, &regs->port[port].ocr2);
274 
275 		writel(readl(&regs->port[port].iconfa2) & ~(3 << (pin * 2)),
276 				&regs->port[port].iconfa2);
277 		writel(readl(&regs->port[port].iconfa2) | aout << (pin * 2),
278 				&regs->port[port].iconfa2);
279 		writel(readl(&regs->port[port].iconfb2) & ~(3 << (pin * 2)),
280 				&regs->port[port].iconfb2);
281 		writel(readl(&regs->port[port].iconfb2) | bout << (pin * 2),
282 				&regs->port[port].iconfb2);
283 	}
284 }
285 
286 #ifdef CONFIG_MXC_UART
287 void mx27_uart1_init_pins(void)
288 {
289 	int i;
290 	unsigned int mode[] = {
291 		PE12_PF_UART1_TXD,
292 		PE13_PF_UART1_RXD,
293 	};
294 
295 	for (i = 0; i < ARRAY_SIZE(mode); i++)
296 		imx_gpio_mode(mode[i]);
297 
298 }
299 #endif /* CONFIG_MXC_UART */
300 
301 #ifdef CONFIG_FEC_MXC
302 void mx27_fec_init_pins(void)
303 {
304 	int i;
305 	unsigned int mode[] = {
306 		PD0_AIN_FEC_TXD0,
307 		PD1_AIN_FEC_TXD1,
308 		PD2_AIN_FEC_TXD2,
309 		PD3_AIN_FEC_TXD3,
310 		PD4_AOUT_FEC_RX_ER,
311 		PD5_AOUT_FEC_RXD1,
312 		PD6_AOUT_FEC_RXD2,
313 		PD7_AOUT_FEC_RXD3,
314 		PD8_AF_FEC_MDIO,
315 		PD9_AIN_FEC_MDC | GPIO_PUEN,
316 		PD10_AOUT_FEC_CRS,
317 		PD11_AOUT_FEC_TX_CLK,
318 		PD12_AOUT_FEC_RXD0,
319 		PD13_AOUT_FEC_RX_DV,
320 		PD14_AOUT_FEC_CLR,
321 		PD15_AOUT_FEC_COL,
322 		PD16_AIN_FEC_TX_ER,
323 		PF23_AIN_FEC_TX_EN,
324 	};
325 
326 	for (i = 0; i < ARRAY_SIZE(mode); i++)
327 		imx_gpio_mode(mode[i]);
328 }
329 
330 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
331 {
332 	int i;
333 	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
334 	struct fuse_bank *bank = &iim->bank[0];
335 	struct fuse_bank0_regs *fuse =
336 			(struct fuse_bank0_regs *)bank->fuse_regs;
337 
338 	for (i = 0; i < 6; i++)
339 		mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff;
340 }
341 #endif /* CONFIG_FEC_MXC */
342 
343 #ifdef CONFIG_MMC_MXC
344 void mx27_sd1_init_pins(void)
345 {
346 	int i;
347 	unsigned int mode[] = {
348 		PE18_PF_SD1_D0,
349 		PE19_PF_SD1_D1,
350 		PE20_PF_SD1_D2,
351 		PE21_PF_SD1_D3,
352 		PE22_PF_SD1_CMD,
353 		PE23_PF_SD1_CLK,
354 	};
355 
356 	for (i = 0; i < ARRAY_SIZE(mode); i++)
357 		imx_gpio_mode(mode[i]);
358 
359 }
360 
361 void mx27_sd2_init_pins(void)
362 {
363 	int i;
364 	unsigned int mode[] = {
365 		PB4_PF_SD2_D0,
366 		PB5_PF_SD2_D1,
367 		PB6_PF_SD2_D2,
368 		PB7_PF_SD2_D3,
369 		PB8_PF_SD2_CMD,
370 		PB9_PF_SD2_CLK,
371 	};
372 
373 	for (i = 0; i < ARRAY_SIZE(mode); i++)
374 		imx_gpio_mode(mode[i]);
375 
376 }
377 #endif /* CONFIG_MMC_MXC */
378 
379 #ifndef CONFIG_SYS_DCACHE_OFF
380 void enable_caches(void)
381 {
382 	/* Enable D-cache. I-cache is already enabled in start.S */
383 	dcache_enable();
384 }
385 #endif /* CONFIG_SYS_DCACHE_OFF */
386