1 /*
2  * (C) Copyright 2009 DENX Software Engineering
3  * Author: John Rigby <jrigby@gmail.com>
4  *
5  * Based on mx27/generic.c:
6  *  Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
7  *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of
12  * the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  */
24 
25 #include <common.h>
26 #include <div64.h>
27 #include <netdev.h>
28 #include <asm/io.h>
29 #include <asm/arch/imx-regs.h>
30 #include <asm/arch/imx25-pinmux.h>
31 #ifdef CONFIG_MXC_MMC
32 #include <asm/arch/mxcmmc.h>
33 #endif
34 
35 /*
36  *  get the system pll clock in Hz
37  *
38  *                  mfi + mfn / (mfd +1)
39  *  f = 2 * f_ref * --------------------
40  *                        pd + 1
41  */
42 static unsigned int imx_decode_pll (unsigned int pll, unsigned int f_ref)
43 {
44 	unsigned int mfi = (pll >> CCM_PLL_MFI_SHIFT)
45 	    & CCM_PLL_MFI_MASK;
46 	unsigned int mfn = (pll >> CCM_PLL_MFN_SHIFT)
47 	    & CCM_PLL_MFN_MASK;
48 	unsigned int mfd = (pll >> CCM_PLL_MFD_SHIFT)
49 	    & CCM_PLL_MFD_MASK;
50 	unsigned int pd = (pll >> CCM_PLL_PD_SHIFT)
51 	    & CCM_PLL_PD_MASK;
52 
53 	mfi = mfi <= 5 ? 5 : mfi;
54 
55 	return lldiv (2 * (u64) f_ref * (mfi * (mfd + 1) + mfn),
56 		      (mfd + 1) * (pd + 1));
57 }
58 
59 static ulong imx_get_mpllclk (void)
60 {
61 	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
62 	ulong fref = 24000000;
63 
64 	return imx_decode_pll (readl (&ccm->mpctl), fref);
65 }
66 
67 ulong imx_get_armclk (void)
68 {
69 	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
70 	ulong cctl = readl (&ccm->cctl);
71 	ulong fref = imx_get_mpllclk ();
72 	ulong div;
73 
74 	if (cctl & CCM_CCTL_ARM_SRC)
75 		fref = lldiv ((fref * 3), 4);
76 
77 	div = ((cctl >> CCM_CCTL_ARM_DIV_SHIFT)
78 	       & CCM_CCTL_ARM_DIV_MASK) + 1;
79 
80 	return lldiv (fref, div);
81 }
82 
83 ulong imx_get_ahbclk (void)
84 {
85 	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
86 	ulong cctl = readl (&ccm->cctl);
87 	ulong fref = imx_get_armclk ();
88 	ulong div;
89 
90 	div = ((cctl >> CCM_CCTL_AHB_DIV_SHIFT)
91 	       & CCM_CCTL_AHB_DIV_MASK) + 1;
92 
93 	return lldiv (fref, div);
94 }
95 
96 ulong imx_get_perclk (int clk)
97 {
98 	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
99 	ulong fref = imx_get_ahbclk ();
100 	ulong div;
101 
102 	div = readl (&ccm->pcdr[CCM_PERCLK_REG (clk)]);
103 	div = ((div >> CCM_PERCLK_SHIFT (clk)) & CCM_PERCLK_MASK) + 1;
104 
105 	return lldiv (fref, div);
106 }
107 
108 #if defined(CONFIG_DISPLAY_CPUINFO)
109 int print_cpuinfo (void)
110 {
111 	char buf[32];
112 
113 	printf ("CPU:   Freescale i.MX25 at %s MHz\n\n",
114 		strmhz (buf, imx_get_armclk ()));
115 	return 0;
116 }
117 #endif
118 
119 int cpu_eth_init (bd_t * bis)
120 {
121 #if defined(CONFIG_FEC_MXC)
122 	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
123 	ulong val;
124 
125 	val = readl (&ccm->cgr0);
126 	val |= (1 << 23);
127 	writel (val, &ccm->cgr0);
128 	return fecmxc_initialize (bis);
129 #else
130 	return 0;
131 #endif
132 }
133 
134 /*
135  * Initializes on-chip MMC controllers.
136  * to override, implement board_mmc_init()
137  */
138 int cpu_mmc_init (bd_t * bis)
139 {
140 #ifdef CONFIG_MXC_MMC
141 	return mxc_mmc_init (bis);
142 #else
143 	return 0;
144 #endif
145 }
146 
147 #ifdef CONFIG_MXC_UART
148 void mx25_uart_init_pins (void)
149 {
150 	struct iomuxc_mux_ctl *muxctl;
151 	struct iomuxc_pad_ctl *padctl;
152 	u32 inpadctl;
153 	u32 outpadctl;
154 	u32 muxmode0;
155 
156 	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
157 	padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
158 	muxmode0 = MX25_PIN_MUX_MODE (0);
159 	/*
160 	 * set up input pins with hysteresis and 100K pull-ups
161 	 */
162 	inpadctl = MX25_PIN_PAD_CTL_HYS
163 	    | MX25_PIN_PAD_CTL_PKE
164 	    | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU;
165 
166 	/*
167 	 * set up output pins with 100K pull-downs
168 	 * FIXME: need to revisit this
169 	 *      PUE is ignored if PKE is not set
170 	 *      so the right value here is likely
171 	 *        0x0 for no pull up/down
172 	 *      or
173 	 *        0xc0 for 100k pull down
174 	 */
175 	outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
176 
177 	/* UART1 */
178 	/* rxd */
179 	writel (muxmode0, &muxctl->pad_uart1_rxd);
180 	writel (inpadctl, &padctl->pad_uart1_rxd);
181 
182 	/* txd */
183 	writel (muxmode0, &muxctl->pad_uart1_txd);
184 	writel (outpadctl, &padctl->pad_uart1_txd);
185 
186 	/* rts */
187 	writel (muxmode0, &muxctl->pad_uart1_rts);
188 	writel (outpadctl, &padctl->pad_uart1_rts);
189 
190 	/* cts */
191 	writel (muxmode0, &muxctl->pad_uart1_cts);
192 	writel (inpadctl, &padctl->pad_uart1_cts);
193 }
194 #endif /* CONFIG_MXC_UART */
195 
196 #ifdef CONFIG_FEC_MXC
197 void mx25_fec_init_pins (void)
198 {
199 	struct iomuxc_mux_ctl *muxctl;
200 	struct iomuxc_pad_ctl *padctl;
201 	u32 inpadctl_100kpd;
202 	u32 inpadctl_22kpu;
203 	u32 outpadctl;
204 	u32 muxmode0;
205 
206 	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
207 	padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
208 	muxmode0 = MX25_PIN_MUX_MODE (0);
209 	inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS
210 	    | MX25_PIN_PAD_CTL_PKE
211 	    | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
212 	inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS
213 	    | MX25_PIN_PAD_CTL_PKE
214 	    | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU;
215 	/*
216 	 * set up output pins with 100K pull-downs
217 	 * FIXME: need to revisit this
218 	 *      PUE is ignored if PKE is not set
219 	 *      so the right value here is likely
220 	 *        0x0 for no pull
221 	 *      or
222 	 *        0xc0 for 100k pull down
223 	 */
224 	outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
225 
226 	/* FEC_TX_CLK */
227 	writel (muxmode0, &muxctl->pad_fec_tx_clk);
228 	writel (inpadctl_100kpd, &padctl->pad_fec_tx_clk);
229 
230 	/* FEC_RX_DV */
231 	writel (muxmode0, &muxctl->pad_fec_rx_dv);
232 	writel (inpadctl_100kpd, &padctl->pad_fec_rx_dv);
233 
234 	/* FEC_RDATA0 */
235 	writel (muxmode0, &muxctl->pad_fec_rdata0);
236 	writel (inpadctl_100kpd, &padctl->pad_fec_rdata0);
237 
238 	/* FEC_TDATA0 */
239 	writel (muxmode0, &muxctl->pad_fec_tdata0);
240 	writel (outpadctl, &padctl->pad_fec_tdata0);
241 
242 	/* FEC_TX_EN */
243 	writel (muxmode0, &muxctl->pad_fec_tx_en);
244 	writel (outpadctl, &padctl->pad_fec_tx_en);
245 
246 	/* FEC_MDC */
247 	writel (muxmode0, &muxctl->pad_fec_mdc);
248 	writel (outpadctl, &padctl->pad_fec_mdc);
249 
250 	/* FEC_MDIO */
251 	writel (muxmode0, &muxctl->pad_fec_mdio);
252 	writel (inpadctl_22kpu, &padctl->pad_fec_mdio);
253 
254 	/* FEC_RDATA1 */
255 	writel (muxmode0, &muxctl->pad_fec_rdata1);
256 	writel (inpadctl_100kpd, &padctl->pad_fec_rdata1);
257 
258 	/* FEC_TDATA1 */
259 	writel (muxmode0, &muxctl->pad_fec_tdata1);
260 	writel (outpadctl, &padctl->pad_fec_tdata1);
261 
262 }
263 
264 void imx_get_mac_from_fuse(unsigned char *mac)
265 {
266 	int i;
267 	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
268 	struct fuse_bank *bank = &iim->bank[0];
269 	struct fuse_bank0_regs *fuse =
270 			(struct fuse_bank0_regs *)bank->fuse_regs;
271 
272 	for (i = 0; i < 6; i++)
273 		mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
274 }
275 #endif /* CONFIG_FEC_MXC */
276