1 /*
2  * (C) Copyright 2010
3  * Marvell Semiconductor <www.marvell.com>
4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
5  * Contributor: Mahavir Jain <mjain@marvell.com>
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
23  * MA 02110-1301 USA
24  */
25 
26 #include <common.h>
27 #include <asm/arch/cpu.h>
28 #include <asm/arch/armada100.h>
29 
30 /*
31  * Timer registers
32  * Refer Section A.6 in Datasheet
33  */
34 struct armd1tmr_registers {
35 	u32 clk_ctrl;	/* Timer clk control reg */
36 	u32 match[9];	/* Timer match registers */
37 	u32 count[3];	/* Timer count registers */
38 	u32 status[3];
39 	u32 ie[3];
40 	u32 preload[3];	/* Timer preload value */
41 	u32 preload_ctrl[3];
42 	u32 wdt_match_en;
43 	u32 wdt_match_r;
44 	u32 wdt_val;
45 	u32 wdt_sts;
46 	u32 icr[3];
47 	u32 wdt_icr;
48 	u32 cer;	/* Timer count enable reg */
49 	u32 cmr;
50 	u32 ilr[3];
51 	u32 wcr;
52 	u32 wfar;
53 	u32 wsar;
54 	u32 cvwr;
55 };
56 
57 #define TIMER			0	/* Use TIMER 0 */
58 /* Each timer has 3 match registers */
59 #define MATCH_CMP(x)		((3 * TIMER) + x)
60 #define TIMER_LOAD_VAL 		0xffffffff
61 #define	COUNT_RD_REQ		0x1
62 
63 DECLARE_GLOBAL_DATA_PTR;
64 /* Using gd->tbu from timestamp and gd->tbl for lastdec */
65 
66 /* For preventing risk of instability in reading counter value,
67  * first set read request to register cvwr and then read same
68  * register after it captures counter value.
69  */
70 ulong read_timer(void)
71 {
72 	struct armd1tmr_registers *armd1timers =
73 		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
74 	volatile int loop=100;
75 
76 	writel(COUNT_RD_REQ, &armd1timers->cvwr);
77 	while (loop--);
78 	return(readl(&armd1timers->cvwr));
79 }
80 
81 ulong get_timer_masked(void)
82 {
83 	ulong now = read_timer();
84 
85 	if (now >= gd->tbl) {
86 		/* normal mode */
87 		gd->tbu += now - gd->tbl;
88 	} else {
89 		/* we have an overflow ... */
90 		gd->tbu += now + TIMER_LOAD_VAL - gd->tbl;
91 	}
92 	gd->tbl = now;
93 
94 	return gd->tbu;
95 }
96 
97 ulong get_timer(ulong base)
98 {
99 	return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) -
100 		base);
101 }
102 
103 void __udelay(unsigned long usec)
104 {
105 	ulong delayticks;
106 	ulong endtime;
107 
108 	delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000));
109 	endtime = get_timer_masked() + delayticks;
110 
111 	while (get_timer_masked() < endtime);
112 }
113 
114 /*
115  * init the Timer
116  */
117 int timer_init(void)
118 {
119 	struct armd1apb1_registers *apb1clkres =
120 		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
121 	struct armd1tmr_registers *armd1timers =
122 		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
123 
124 	/* Enable Timer clock at 3.25 MHZ */
125 	writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers);
126 
127 	/* load value into timer */
128 	writel(0x0, &armd1timers->clk_ctrl);
129 	/* Use Timer 0 Match Resiger 0 */
130 	writel(TIMER_LOAD_VAL, &armd1timers->match[MATCH_CMP(0)]);
131 	/* Preload value is 0 */
132 	writel(0x0, &armd1timers->preload[TIMER]);
133 	/* Enable match comparator 0 for Timer 0 */
134 	writel(0x1, &armd1timers->preload_ctrl[TIMER]);
135 
136 	/* Enable timer 0 */
137 	writel(0x1, &armd1timers->cer);
138 	/* init the gd->tbu and gd->tbl value */
139 	gd->tbl = read_timer();
140 	gd->tbu = 0;
141 
142 	return 0;
143 }
144 
145 #define MPMU_APRR_WDTR	(1<<4)
146 #define TMR_WFAR	0xbaba	/* WDT Register First key */
147 #define TMP_WSAR	0xeb10	/* WDT Register Second key */
148 
149 /*
150  * This function uses internal Watchdog Timer
151  * based reset mechanism.
152  * Steps to write watchdog registers (protected access)
153  * 1. Write key value to TMR_WFAR reg.
154  * 2. Write key value to TMP_WSAR reg.
155  * 3. Perform write operation.
156  */
157 void reset_cpu (unsigned long ignored)
158 {
159 	struct armd1mpmu_registers *mpmu =
160 		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
161 	struct armd1tmr_registers *armd1timers =
162 		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
163 	u32 val;
164 
165 	/* negate hardware reset to the WDT after system reset */
166 	val = readl(&mpmu->aprr);
167 	val = val | MPMU_APRR_WDTR;
168 	writel(val, &mpmu->aprr);
169 
170 	/* reset/enable WDT clock */
171 	writel(APBC_APBCLK | APBC_FNCLK | APBC_RST, &mpmu->wdtpcr);
172 	readl(&mpmu->wdtpcr);
173 	writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr);
174 	readl(&mpmu->wdtpcr);
175 
176 	/* clear previous WDT status */
177 	writel(TMR_WFAR, &armd1timers->wfar);
178 	writel(TMP_WSAR, &armd1timers->wsar);
179 	writel(0, &armd1timers->wdt_sts);
180 
181 	/* set match counter */
182 	writel(TMR_WFAR, &armd1timers->wfar);
183 	writel(TMP_WSAR, &armd1timers->wsar);
184 	writel(0xf, &armd1timers->wdt_match_r);
185 
186 	/* enable WDT reset */
187 	writel(TMR_WFAR, &armd1timers->wfar);
188 	writel(TMP_WSAR, &armd1timers->wsar);
189 	writel(0x3, &armd1timers->wdt_match_en);
190 
191 	while(1);
192 }
193