1 /* 2 * (C) Copyright 2010 3 * Marvell Semiconductor <www.marvell.com> 4 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 5 * Contributor: Mahavir Jain <mjain@marvell.com> 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, 23 * MA 02110-1301 USA 24 */ 25 26 #include <common.h> 27 #include <asm/arch/armada100.h> 28 #include <asm/io.h> 29 30 #define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1)) 31 #define SET_MRVL_ID (1<<8) 32 #define L2C_RAM_SEL (1<<4) 33 34 int arch_cpu_init(void) 35 { 36 u32 val; 37 struct armd1cpu_registers *cpuregs = 38 (struct armd1cpu_registers *) ARMD1_CPU_BASE; 39 40 struct armd1apb1_registers *apb1clkres = 41 (struct armd1apb1_registers *) ARMD1_APBC1_BASE; 42 43 struct armd1mpmu_registers *mpmu = 44 (struct armd1mpmu_registers *) ARMD1_MPMU_BASE; 45 46 /* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */ 47 val = readl(&cpuregs->cpu_conf); 48 val = val | SET_MRVL_ID; 49 writel(val, &cpuregs->cpu_conf); 50 51 /* Enable Clocks for all hardware units */ 52 writel(0xFFFFFFFF, &mpmu->acgr); 53 54 /* Turn on AIB and AIB-APB Functional clock */ 55 writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib); 56 57 /* ensure L2 cache is not mapped as SRAM */ 58 val = readl(&cpuregs->cpu_conf); 59 val = val & ~(L2C_RAM_SEL); 60 writel(val, &cpuregs->cpu_conf); 61 62 /* Enable GPIO clock */ 63 writel(APBC_APBCLK, &apb1clkres->gpio); 64 65 #ifdef CONFIG_I2C_MV 66 /* Enable general I2C clock */ 67 writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); 68 writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); 69 70 /* Enable power I2C clock */ 71 writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); 72 writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); 73 #endif 74 75 /* 76 * Enable Functional and APB clock at 14.7456MHz 77 * for configured UART console 78 */ 79 #if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE) 80 writel(UARTCLK14745KHZ, &apb1clkres->uart3); 81 #elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE) 82 writel(UARTCLK14745KHZ, &apb1clkres->uart2); 83 #else 84 writel(UARTCLK14745KHZ, &apb1clkres->uart1); 85 #endif 86 icache_enable(); 87 88 return 0; 89 } 90 91 #if defined(CONFIG_DISPLAY_CPUINFO) 92 int print_cpuinfo(void) 93 { 94 u32 id; 95 struct armd1cpu_registers *cpuregs = 96 (struct armd1cpu_registers *) ARMD1_CPU_BASE; 97 98 id = readl(&cpuregs->chip_id); 99 printf("SoC: Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10)); 100 return 0; 101 } 102 #endif 103 104 #ifdef CONFIG_I2C_MV 105 void i2c_clk_enable(void) 106 { 107 } 108 #endif 109