xref: /openbmc/u-boot/arch/arm/cpu/arm720t/interrupts.c (revision 34a31bf5)
1 /*
2  * (C) Copyright 2002
3  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4  * Marius Groeger <mgroeger@sysgo.de>
5  *
6  * (C) Copyright 2002
7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
8  * Alex Zuepke <azu@sysgo.de>
9  *
10  * See file CREDITS for list of people who contributed to this
11  * project.
12  *
13  * This program is free software; you can redistribute it and/or
14  * modify it under the terms of the GNU General Public License as
15  * published by the Free Software Foundation; either version 2 of
16  * the License, or (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26  * MA 02111-1307 USA
27  */
28 
29 #include <common.h>
30 #include <clps7111.h>
31 #include <asm/proc-armv/ptrace.h>
32 #include <asm/hardware.h>
33 
34 #ifndef CONFIG_NETARM
35 /* we always count down the max. */
36 #define TIMER_LOAD_VAL 0xffff
37 /* macro to read the 16 bit timer */
38 #define READ_TIMER (IO_TC1D & 0xffff)
39 
40 #ifdef CONFIG_LPC2292
41 #undef READ_TIMER
42 #define READ_TIMER (0xFFFFFFFF - GET32(T0TC))
43 #endif
44 
45 #else
46 #define IRQEN	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
47 #define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
48 #define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
49 #define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
50 #define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
51 #endif
52 
53 #ifdef CONFIG_S3C4510B
54 /* require interrupts for the S3C4510B */
55 # ifndef CONFIG_USE_IRQ
56 #  error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B
57 # else
58 static struct _irq_handler IRQ_HANDLER[N_IRQS];
59 # endif
60 #endif	/* CONFIG_S3C4510B */
61 
62 #ifdef CONFIG_USE_IRQ
63 void do_irq (struct pt_regs *pt_regs)
64 {
65 #if defined(CONFIG_S3C4510B)
66 	unsigned int pending;
67 
68 	while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) {  /* sentinal value for no pending interrutps */
69 		IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data);
70 
71 		/* clear pending interrupt */
72 		PUT_REG( REG_INTPEND, (1<<(pending>>2)));
73 	}
74 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
75 	/* No do_irq() for IntegratorAP/CM720T as yet */
76 #elif defined(CONFIG_LPC2292)
77 
78     void (*pfnct)(void);
79 
80     pfnct = (void (*)(void))VICVectAddr;
81 
82     (*pfnct)();
83 #else
84 #error do_irq() not defined for this CPU type
85 #endif
86 }
87 #endif
88 
89 #ifdef CONFIG_S3C4510B
90 static void default_isr( void *data) {
91 	printf ("default_isr():  called for IRQ %d\n", (int)data);
92 }
93 
94 static void timer_isr( void *data) {
95 	unsigned int *pTime = (unsigned int *)data;
96 
97 	(*pTime)++;
98 	if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
99 		/* toggle LED 0 */
100 		PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
101 	}
102 
103 }
104 #endif
105 
106 #if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
107 	/* Use IntegratorAP routines in board/integratorap.c */
108 #else
109 
110 static ulong timestamp;
111 static ulong lastdec;
112 
113 #if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B)
114 int arch_interrupt_init (void)
115 {
116 	int i;
117 
118 	/* install default interrupt handlers */
119 	for ( i = 0; i < N_IRQS; i++) {
120 		IRQ_HANDLER[i].m_data = (void *)i;
121 		IRQ_HANDLER[i].m_func = default_isr;
122 	}
123 
124 	/* configure interrupts for IRQ mode */
125 	PUT_REG( REG_INTMODE, 0x0);
126 	/* clear any pending interrupts */
127 	PUT_REG( REG_INTPEND, 0x1FFFFF);
128 
129 	lastdec = 0;
130 
131 	/* install interrupt handler for timer */
132 	IRQ_HANDLER[INT_TIMER0].m_data = (void *)&timestamp;
133 	IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
134 
135 	return 0;
136 }
137 #endif
138 
139 int timer_init (void)
140 {
141 #if defined(CONFIG_NETARM)
142 	/* disable all interrupts */
143 	IRQEN = 0;
144 
145 	/* operate timer 2 in non-prescale mode */
146 	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
147 		    NETARM_GEN_TCTL_ENABLE |
148 		    NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
149 
150 	/* set timer 2 counter */
151 	lastdec = TIMER_LOAD_VAL;
152 #elif defined(CONFIG_S3C4510B)
153 	/* configure free running timer 0 */
154 	PUT_REG( REG_TMOD, 0x0);
155 	/* Stop timer 0 */
156 	CLR_REG( REG_TMOD, TM0_RUN);
157 
158 	/* Configure for interval mode */
159 	CLR_REG( REG_TMOD, TM1_TOGGLE);
160 
161 	/*
162 	 * Load Timer data register with count down value.
163 	 * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
164 	 */
165 	PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
166 
167 	/*
168 	 * Enable global interrupt
169 	 * Enable timer0 interrupt
170 	 */
171 	CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0)));
172 
173 	/* Start timer */
174 	SET_REG( REG_TMOD, TM0_RUN);
175 #elif defined(CONFIG_LPC2292)
176 	PUT32(T0IR, 0);		/* disable all timer0 interrupts */
177 	PUT32(T0TCR, 0);	/* disable timer0 */
178 	PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
179 	PUT32(T0MCR, 0);
180 	PUT32(T0TC, 0);
181 	PUT32(T0TCR, 1);	/* enable timer0 */
182 
183 #elif defined(CONFIG_TEGRA)
184 	/* No timer routines for tegra as yet */
185 	lastdec = 0;
186 #else
187 #error No timer_init() defined for this CPU type
188 #endif
189 	timestamp = 0;
190 
191 	return (0);
192 }
193 
194 #endif /* ! IntegratorAP */
195 
196 /*
197  * timer without interrupts
198  */
199 
200 
201 #if defined(CONFIG_NETARM) || defined(CONFIG_LPC2292)
202 
203 ulong get_timer (ulong base)
204 {
205 	return get_timer_masked () - base;
206 }
207 
208 void __udelay (unsigned long usec)
209 {
210 	ulong tmo;
211 
212 	tmo = usec / 1000;
213 	tmo *= CONFIG_SYS_HZ;
214 	tmo /= 1000;
215 
216 	tmo += get_timer (0);
217 
218 	while (get_timer_masked () < tmo)
219 #ifdef CONFIG_LPC2292
220 		/* GJ - not sure whether this is really needed or a misunderstanding */
221 		__asm__ __volatile__(" nop");
222 #else
223 		/*NOP*/;
224 #endif
225 }
226 
227 ulong get_timer_masked (void)
228 {
229 	ulong now = READ_TIMER;
230 
231 	if (lastdec >= now) {
232 		/* normal mode */
233 		timestamp += lastdec - now;
234 	} else {
235 		/* we have an overflow ... */
236 		timestamp += lastdec + TIMER_LOAD_VAL - now;
237 	}
238 	lastdec = now;
239 
240 	return timestamp;
241 }
242 
243 void udelay_masked (unsigned long usec)
244 {
245 	ulong tmo;
246 	ulong endtime;
247 	signed long diff;
248 
249 	if (usec >= 1000) {
250 		tmo = usec / 1000;
251 		tmo *= CONFIG_SYS_HZ;
252 		tmo /= 1000;
253 	} else {
254 		tmo = usec * CONFIG_SYS_HZ;
255 		tmo /= (1000*1000);
256 	}
257 
258 	endtime = get_timer_masked () + tmo;
259 
260 	do {
261 		ulong now = get_timer_masked ();
262 		diff = endtime - now;
263 	} while (diff >= 0);
264 }
265 
266 #elif defined(CONFIG_S3C4510B)
267 
268 ulong get_timer (ulong base)
269 {
270 	return timestamp - base;
271 }
272 
273 void __udelay (unsigned long usec)
274 {
275 	u32 ticks;
276 
277 	ticks = (usec * CONFIG_SYS_HZ) / 1000000;
278 
279 	ticks += get_timer (0);
280 
281 	while (get_timer (0) < ticks)
282 		/*NOP*/;
283 
284 }
285 
286 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
287 	/* No timer routines for IntegratorAP/CM720T as yet */
288 #elif defined(CONFIG_TEGRA)
289 	/* No timer routines for tegra as yet */
290 #else
291 #error Timer routines not defined for this CPU type
292 #endif
293