xref: /openbmc/u-boot/arch/arm/cpu/arm1136/mx35/generic.c (revision c0fb2fc0)
1 /*
2  * (C) Copyright 2007
3  * Sascha Hauer, Pengutronix
4  *
5  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #include <common.h>
11 #include <div64.h>
12 #include <asm/io.h>
13 #include <linux/errno.h>
14 #include <asm/arch/imx-regs.h>
15 #include <asm/arch/crm_regs.h>
16 #include <asm/arch/clock.h>
17 #include <asm/arch/sys_proto.h>
18 #ifdef CONFIG_FSL_ESDHC
19 #include <fsl_esdhc.h>
20 #endif
21 #include <netdev.h>
22 #include <spl.h>
23 
24 #define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel))
25 #define CLK_CODE_ARM(c)		(((c) >> 16) & 0xFF)
26 #define CLK_CODE_AHB(c)		(((c) >>  8) & 0xFF)
27 #define CLK_CODE_PATH(c)	((c) & 0xFF)
28 
29 #define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o))
30 
31 #ifdef CONFIG_FSL_ESDHC
32 DECLARE_GLOBAL_DATA_PTR;
33 #endif
34 
35 static int g_clk_mux_auto[8] = {
36 	CLK_CODE(1, 3, 0), CLK_CODE(1, 2, 1), CLK_CODE(2, 1, 1), -1,
37 	CLK_CODE(1, 6, 0), CLK_CODE(1, 4, 1), CLK_CODE(2, 2, 1), -1,
38 };
39 
40 static int g_clk_mux_consumer[16] = {
41 	CLK_CODE(1, 4, 0), CLK_CODE(1, 3, 1), CLK_CODE(1, 3, 1), -1,
42 	-1, -1, CLK_CODE(4, 1, 0), CLK_CODE(1, 5, 0),
43 	CLK_CODE(1, 8, 1), CLK_CODE(1, 6, 1), CLK_CODE(2, 4, 0), -1,
44 	-1, -1, CLK_CODE(4, 2, 0), -1,
45 };
46 
47 static int hsp_div_table[3][16] = {
48 	{4, 3, 2, -1, -1, -1, 1, 5, 4, 3, 2, -1, -1, -1, 1, -1},
49 	{-1, -1, -1, -1, -1, -1, -1, -1, 8, 6, 4, -1, -1, -1, 2, -1},
50 	{3, -1, -1, -1, -1, -1, -1, -1, 3, -1, -1, -1, -1, -1, -1, -1},
51 };
52 
53 u32 get_cpu_rev(void)
54 {
55 	int reg;
56 	struct iim_regs *iim =
57 		(struct iim_regs *)IIM_BASE_ADDR;
58 	reg = readl(&iim->iim_srev);
59 	if (!reg) {
60 		reg = readw(ROMPATCH_REV);
61 		reg <<= 4;
62 	} else {
63 		reg += CHIP_REV_1_0;
64 	}
65 
66 	return 0x35000 + (reg & 0xFF);
67 }
68 
69 static u32 get_arm_div(u32 pdr0, u32 *fi, u32 *fd)
70 {
71 	int *pclk_mux;
72 	if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
73 		pclk_mux = g_clk_mux_consumer +
74 			((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
75 			MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
76 	} else {
77 		pclk_mux = g_clk_mux_auto +
78 			((pdr0 & MXC_CCM_PDR0_AUTO_MUX_DIV_MASK) >>
79 			MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET);
80 	}
81 
82 	if ((*pclk_mux) == -1)
83 		return -1;
84 
85 	if (fi && fd) {
86 		if (!CLK_CODE_PATH(*pclk_mux)) {
87 			*fi = *fd = 1;
88 			return CLK_CODE_ARM(*pclk_mux);
89 		}
90 		if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
91 			*fi = 3;
92 			*fd = 4;
93 		} else {
94 			*fi = 2;
95 			*fd = 3;
96 		}
97 	}
98 	return CLK_CODE_ARM(*pclk_mux);
99 }
100 
101 static int get_ahb_div(u32 pdr0)
102 {
103 	int *pclk_mux;
104 
105 	pclk_mux = g_clk_mux_consumer +
106 		((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
107 		MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
108 
109 	if ((*pclk_mux) == -1)
110 		return -1;
111 
112 	return CLK_CODE_AHB(*pclk_mux);
113 }
114 
115 static u32 decode_pll(u32 reg, u32 infreq)
116 {
117 	u32 mfi = (reg >> 10) & 0xf;
118 	s32 mfn = reg & 0x3ff;
119 	u32 mfd = (reg >> 16) & 0x3ff;
120 	u32 pd = (reg >> 26) & 0xf;
121 
122 	mfi = mfi <= 5 ? 5 : mfi;
123 	mfn = mfn >= 512 ? mfn - 1024 : mfn;
124 	mfd += 1;
125 	pd += 1;
126 
127 	return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
128 		mfd * pd);
129 }
130 
131 static u32 get_mcu_main_clk(void)
132 {
133 	u32 arm_div = 0, fi = 0, fd = 0;
134 	struct ccm_regs *ccm =
135 		(struct ccm_regs *)IMX_CCM_BASE;
136 	arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd);
137 	fi *= decode_pll(readl(&ccm->mpctl), MXC_HCLK);
138 	return fi / (arm_div * fd);
139 }
140 
141 static u32 get_ipg_clk(void)
142 {
143 	u32 freq = get_mcu_main_clk();
144 	struct ccm_regs *ccm =
145 		(struct ccm_regs *)IMX_CCM_BASE;
146 	u32 pdr0 = readl(&ccm->pdr0);
147 
148 	return freq / (get_ahb_div(pdr0) * 2);
149 }
150 
151 static u32 get_ipg_per_clk(void)
152 {
153 	u32 freq = get_mcu_main_clk();
154 	struct ccm_regs *ccm =
155 		(struct ccm_regs *)IMX_CCM_BASE;
156 	u32 pdr0 = readl(&ccm->pdr0);
157 	u32 pdr4 = readl(&ccm->pdr4);
158 	u32 div;
159 	if (pdr0 & MXC_CCM_PDR0_PER_SEL) {
160 		div = CCM_GET_DIVIDER(pdr4,
161 			MXC_CCM_PDR4_PER0_PODF_MASK,
162 			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1;
163 	} else {
164 		div = CCM_GET_DIVIDER(pdr0,
165 			MXC_CCM_PDR0_PER_PODF_MASK,
166 			MXC_CCM_PDR0_PER_PODF_OFFSET) + 1;
167 		div *= get_ahb_div(pdr0);
168 	}
169 	return freq / div;
170 }
171 
172 u32 imx_get_uartclk(void)
173 {
174 	u32 freq;
175 	struct ccm_regs *ccm =
176 		(struct ccm_regs *)IMX_CCM_BASE;
177 	u32 pdr4 = readl(&ccm->pdr4);
178 
179 	if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U)
180 		freq = get_mcu_main_clk();
181 	else
182 		freq = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
183 	freq /= CCM_GET_DIVIDER(pdr4,
184 			MXC_CCM_PDR4_UART_PODF_MASK,
185 			MXC_CCM_PDR4_UART_PODF_OFFSET) + 1;
186 	return freq;
187 }
188 
189 unsigned int mxc_get_main_clock(enum mxc_main_clock clk)
190 {
191 	u32 nfc_pdf, hsp_podf;
192 	u32 pll, ret_val = 0, usb_podf;
193 	struct ccm_regs *ccm =
194 		(struct ccm_regs *)IMX_CCM_BASE;
195 
196 	u32 reg = readl(&ccm->pdr0);
197 	u32 reg4 = readl(&ccm->pdr4);
198 
199 	reg |= 0x1;
200 
201 	switch (clk) {
202 	case CPU_CLK:
203 		ret_val = get_mcu_main_clk();
204 		break;
205 	case AHB_CLK:
206 		ret_val = get_mcu_main_clk();
207 		break;
208 	case HSP_CLK:
209 		if (reg & CLKMODE_CONSUMER) {
210 			hsp_podf = (reg >> 20) & 0x3;
211 			pll = get_mcu_main_clk();
212 			hsp_podf = hsp_div_table[hsp_podf][(reg>>16)&0xF];
213 			if (hsp_podf > 0) {
214 				ret_val = pll / hsp_podf;
215 			} else {
216 				puts("mismatch HSP with ARM clock setting\n");
217 				ret_val = 0;
218 			}
219 		} else {
220 			ret_val = get_mcu_main_clk();
221 		}
222 		break;
223 	case IPG_CLK:
224 		ret_val = get_ipg_clk();
225 		break;
226 	case IPG_PER_CLK:
227 		ret_val = get_ipg_per_clk();
228 		break;
229 	case NFC_CLK:
230 		nfc_pdf = (reg4 >> 28) & 0xF;
231 		pll = get_mcu_main_clk();
232 		/* AHB/nfc_pdf */
233 		ret_val = pll / (nfc_pdf + 1);
234 		break;
235 	case USB_CLK:
236 		usb_podf = (reg4 >> 22) & 0x3F;
237 		if (reg4 & 0x200)
238 			pll = get_mcu_main_clk();
239 		else
240 			pll = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
241 
242 		ret_val = pll / (usb_podf + 1);
243 		break;
244 	default:
245 		printf("Unknown clock: %d\n", clk);
246 		break;
247 	}
248 
249 	return ret_val;
250 }
251 unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk)
252 {
253 	u32 ret_val = 0, pdf, pre_pdf, clk_sel;
254 	struct ccm_regs *ccm =
255 		(struct ccm_regs *)IMX_CCM_BASE;
256 	u32 mpdr2 = readl(&ccm->pdr2);
257 	u32 mpdr3 = readl(&ccm->pdr3);
258 	u32 mpdr4 = readl(&ccm->pdr4);
259 
260 	switch (clk) {
261 	case UART1_BAUD:
262 	case UART2_BAUD:
263 	case UART3_BAUD:
264 		clk_sel = mpdr3 & (1 << 14);
265 		pdf = (mpdr4 >> 10) & 0x3F;
266 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
267 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
268 		break;
269 	case SSI1_BAUD:
270 		pre_pdf = (mpdr2 >> 24) & 0x7;
271 		pdf = mpdr2 & 0x3F;
272 		clk_sel = mpdr2 & (1 << 6);
273 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
274 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
275 				((pre_pdf + 1) * (pdf + 1));
276 		break;
277 	case SSI2_BAUD:
278 		pre_pdf = (mpdr2 >> 27) & 0x7;
279 		pdf = (mpdr2 >> 8) & 0x3F;
280 		clk_sel = mpdr2 & (1 << 6);
281 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
282 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
283 				((pre_pdf + 1) * (pdf + 1));
284 		break;
285 	case CSI_BAUD:
286 		clk_sel = mpdr2 & (1 << 7);
287 		pdf = (mpdr2 >> 16) & 0x3F;
288 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
289 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
290 		break;
291 	case MSHC_CLK:
292 		pre_pdf = readl(&ccm->pdr1);
293 		clk_sel = (pre_pdf & 0x80);
294 		pdf = (pre_pdf >> 22) & 0x3F;
295 		pre_pdf = (pre_pdf >> 28) & 0x7;
296 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
297 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
298 				((pre_pdf + 1) * (pdf + 1));
299 		break;
300 	case ESDHC1_CLK:
301 		clk_sel = mpdr3 & 0x40;
302 		pdf = mpdr3 & 0x3F;
303 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
304 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
305 		break;
306 	case ESDHC2_CLK:
307 		clk_sel = mpdr3 & 0x40;
308 		pdf = (mpdr3 >> 8) & 0x3F;
309 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
310 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
311 		break;
312 	case ESDHC3_CLK:
313 		clk_sel = mpdr3 & 0x40;
314 		pdf = (mpdr3 >> 16) & 0x3F;
315 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
316 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
317 		break;
318 	case SPDIF_CLK:
319 		clk_sel = mpdr3 & 0x400000;
320 		pre_pdf = (mpdr3 >> 29) & 0x7;
321 		pdf = (mpdr3 >> 23) & 0x3F;
322 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
323 			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
324 				((pre_pdf + 1) * (pdf + 1));
325 		break;
326 	default:
327 		printf("%s(): This clock: %d not supported yet\n",
328 				__func__, clk);
329 		break;
330 	}
331 
332 	return ret_val;
333 }
334 
335 unsigned int mxc_get_clock(enum mxc_clock clk)
336 {
337 	switch (clk) {
338 	case MXC_ARM_CLK:
339 		return get_mcu_main_clk();
340 	case MXC_AHB_CLK:
341 		break;
342 	case MXC_IPG_CLK:
343 		return get_ipg_clk();
344 	case MXC_IPG_PERCLK:
345 	case MXC_I2C_CLK:
346 		return get_ipg_per_clk();
347 	case MXC_UART_CLK:
348 		return imx_get_uartclk();
349 	case MXC_ESDHC1_CLK:
350 		return mxc_get_peri_clock(ESDHC1_CLK);
351 	case MXC_ESDHC2_CLK:
352 		return mxc_get_peri_clock(ESDHC2_CLK);
353 	case MXC_ESDHC3_CLK:
354 		return mxc_get_peri_clock(ESDHC3_CLK);
355 	case MXC_USB_CLK:
356 		return mxc_get_main_clock(USB_CLK);
357 	case MXC_FEC_CLK:
358 		return get_ipg_clk();
359 	case MXC_CSPI_CLK:
360 		return get_ipg_clk();
361 	}
362 	return -1;
363 }
364 
365 #ifdef CONFIG_FEC_MXC
366 /*
367  * The MX35 has no fuse for MAC, return a NULL MAC
368  */
369 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
370 {
371 	memset(mac, 0, 6);
372 }
373 
374 u32 imx_get_fecclk(void)
375 {
376 	return mxc_get_clock(MXC_IPG_CLK);
377 }
378 #endif
379 
380 int do_mx35_showclocks(cmd_tbl_t *cmdtp,
381 	int flag, int argc, char * const argv[])
382 {
383 	u32 cpufreq = get_mcu_main_clk();
384 	printf("mx35 cpu clock: %dMHz\n", cpufreq / 1000000);
385 	printf("ipg clock     : %dHz\n", get_ipg_clk());
386 	printf("ipg per clock : %dHz\n", get_ipg_per_clk());
387 	printf("uart clock    : %dHz\n", mxc_get_clock(MXC_UART_CLK));
388 
389 	return 0;
390 }
391 
392 U_BOOT_CMD(
393 	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks,
394 	"display clocks",
395 	""
396 );
397 
398 #if defined(CONFIG_DISPLAY_CPUINFO)
399 static char *get_reset_cause(void)
400 {
401 	/* read RCSR register from CCM module */
402 	struct ccm_regs *ccm =
403 		(struct ccm_regs *)IMX_CCM_BASE;
404 
405 	u32 cause = readl(&ccm->rcsr) & 0x0F;
406 
407 	switch (cause) {
408 	case 0x0000:
409 		return "POR";
410 	case 0x0002:
411 		return "JTAG";
412 	case 0x0004:
413 		return "RST";
414 	case 0x0008:
415 		return "WDOG";
416 	default:
417 		return "unknown reset";
418 	}
419 }
420 
421 int print_cpuinfo(void)
422 {
423 	u32 srev = get_cpu_rev();
424 
425 	printf("CPU:   Freescale i.MX35 rev %d.%d at %d MHz.\n",
426 		(srev & 0xF0) >> 4, (srev & 0x0F),
427 		get_mcu_main_clk() / 1000000);
428 
429 	printf("Reset cause: %s\n", get_reset_cause());
430 
431 	return 0;
432 }
433 #endif
434 
435 /*
436  * Initializes on-chip ethernet controllers.
437  * to override, implement board_eth_init()
438  */
439 int cpu_eth_init(bd_t *bis)
440 {
441 	int rc = -ENODEV;
442 
443 #if defined(CONFIG_FEC_MXC)
444 	rc = fecmxc_initialize(bis);
445 #endif
446 
447 	return rc;
448 }
449 
450 #ifdef CONFIG_FSL_ESDHC
451 /*
452  * Initializes on-chip MMC controllers.
453  * to override, implement board_mmc_init()
454  */
455 int cpu_mmc_init(bd_t *bis)
456 {
457 	return fsl_esdhc_mmc_init(bis);
458 }
459 #endif
460 
461 int get_clocks(void)
462 {
463 #ifdef CONFIG_FSL_ESDHC
464 #if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
465 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
466 #elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
467 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
468 #else
469 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
470 #endif
471 #endif
472 	return 0;
473 }
474 
475 #define RCSR_MEM_CTL_WEIM	0
476 #define RCSR_MEM_CTL_NAND	1
477 #define RCSR_MEM_CTL_ATA	2
478 #define RCSR_MEM_CTL_EXPANSION	3
479 #define RCSR_MEM_TYPE_NOR	0
480 #define RCSR_MEM_TYPE_ONENAND	2
481 #define RCSR_MEM_TYPE_SD	0
482 #define RCSR_MEM_TYPE_I2C	2
483 #define RCSR_MEM_TYPE_SPI	3
484 
485 u32 spl_boot_device(void)
486 {
487 	struct ccm_regs *ccm =
488 		(struct ccm_regs *)IMX_CCM_BASE;
489 
490 	u32 rcsr = readl(&ccm->rcsr);
491 	u32 mem_type, mem_ctl;
492 
493 	/* In external mode, no boot device is returned */
494 	if ((rcsr >> 10) & 0x03)
495 		return BOOT_DEVICE_NONE;
496 
497 	mem_ctl = (rcsr >> 25) & 0x03;
498 	mem_type = (rcsr >> 23) & 0x03;
499 
500 	switch (mem_ctl) {
501 	case RCSR_MEM_CTL_WEIM:
502 		switch (mem_type) {
503 		case RCSR_MEM_TYPE_NOR:
504 			return BOOT_DEVICE_NOR;
505 		case RCSR_MEM_TYPE_ONENAND:
506 			return BOOT_DEVICE_ONENAND;
507 		default:
508 			return BOOT_DEVICE_NONE;
509 		}
510 	case RCSR_MEM_CTL_NAND:
511 		return BOOT_DEVICE_NAND;
512 	case RCSR_MEM_CTL_EXPANSION:
513 		switch (mem_type) {
514 		case RCSR_MEM_TYPE_SD:
515 			return BOOT_DEVICE_MMC1;
516 		case RCSR_MEM_TYPE_I2C:
517 			return BOOT_DEVICE_I2C;
518 		case RCSR_MEM_TYPE_SPI:
519 			return BOOT_DEVICE_SPI;
520 		default:
521 			return BOOT_DEVICE_NONE;
522 		}
523 	}
524 
525 	return BOOT_DEVICE_NONE;
526 }
527