1 /* 2 * (C) Copyright 2007 3 * Sascha Hauer, Pengutronix 4 * 5 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <div64.h> 12 #include <asm/io.h> 13 #include <asm/errno.h> 14 #include <asm/arch/imx-regs.h> 15 #include <asm/arch/crm_regs.h> 16 #include <asm/arch/clock.h> 17 #include <asm/arch/sys_proto.h> 18 #ifdef CONFIG_FSL_ESDHC 19 #include <fsl_esdhc.h> 20 #endif 21 #include <netdev.h> 22 #include <spl.h> 23 24 #define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel)) 25 #define CLK_CODE_ARM(c) (((c) >> 16) & 0xFF) 26 #define CLK_CODE_AHB(c) (((c) >> 8) & 0xFF) 27 #define CLK_CODE_PATH(c) ((c) & 0xFF) 28 29 #define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o)) 30 31 #ifdef CONFIG_FSL_ESDHC 32 DECLARE_GLOBAL_DATA_PTR; 33 #endif 34 35 static int g_clk_mux_auto[8] = { 36 CLK_CODE(1, 3, 0), CLK_CODE(1, 2, 1), CLK_CODE(2, 1, 1), -1, 37 CLK_CODE(1, 6, 0), CLK_CODE(1, 4, 1), CLK_CODE(2, 2, 1), -1, 38 }; 39 40 static int g_clk_mux_consumer[16] = { 41 CLK_CODE(1, 4, 0), CLK_CODE(1, 3, 1), CLK_CODE(1, 3, 1), -1, 42 -1, -1, CLK_CODE(4, 1, 0), CLK_CODE(1, 5, 0), 43 CLK_CODE(1, 8, 1), CLK_CODE(1, 6, 1), CLK_CODE(2, 4, 0), -1, 44 -1, -1, CLK_CODE(4, 2, 0), -1, 45 }; 46 47 static int hsp_div_table[3][16] = { 48 {4, 3, 2, -1, -1, -1, 1, 5, 4, 3, 2, -1, -1, -1, 1, -1}, 49 {-1, -1, -1, -1, -1, -1, -1, -1, 8, 6, 4, -1, -1, -1, 2, -1}, 50 {3, -1, -1, -1, -1, -1, -1, -1, 3, -1, -1, -1, -1, -1, -1, -1}, 51 }; 52 53 u32 get_cpu_rev(void) 54 { 55 int reg; 56 struct iim_regs *iim = 57 (struct iim_regs *)IIM_BASE_ADDR; 58 reg = readl(&iim->iim_srev); 59 if (!reg) { 60 reg = readw(ROMPATCH_REV); 61 reg <<= 4; 62 } else { 63 reg += CHIP_REV_1_0; 64 } 65 66 return 0x35000 + (reg & 0xFF); 67 } 68 69 static u32 get_arm_div(u32 pdr0, u32 *fi, u32 *fd) 70 { 71 int *pclk_mux; 72 if (pdr0 & MXC_CCM_PDR0_AUTO_CON) { 73 pclk_mux = g_clk_mux_consumer + 74 ((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >> 75 MXC_CCM_PDR0_CON_MUX_DIV_OFFSET); 76 } else { 77 pclk_mux = g_clk_mux_auto + 78 ((pdr0 & MXC_CCM_PDR0_AUTO_MUX_DIV_MASK) >> 79 MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET); 80 } 81 82 if ((*pclk_mux) == -1) 83 return -1; 84 85 if (fi && fd) { 86 if (!CLK_CODE_PATH(*pclk_mux)) { 87 *fi = *fd = 1; 88 return CLK_CODE_ARM(*pclk_mux); 89 } 90 if (pdr0 & MXC_CCM_PDR0_AUTO_CON) { 91 *fi = 3; 92 *fd = 4; 93 } else { 94 *fi = 2; 95 *fd = 3; 96 } 97 } 98 return CLK_CODE_ARM(*pclk_mux); 99 } 100 101 static int get_ahb_div(u32 pdr0) 102 { 103 int *pclk_mux; 104 105 pclk_mux = g_clk_mux_consumer + 106 ((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >> 107 MXC_CCM_PDR0_CON_MUX_DIV_OFFSET); 108 109 if ((*pclk_mux) == -1) 110 return -1; 111 112 return CLK_CODE_AHB(*pclk_mux); 113 } 114 115 static u32 decode_pll(u32 reg, u32 infreq) 116 { 117 u32 mfi = (reg >> 10) & 0xf; 118 s32 mfn = reg & 0x3ff; 119 u32 mfd = (reg >> 16) & 0x3ff; 120 u32 pd = (reg >> 26) & 0xf; 121 122 mfi = mfi <= 5 ? 5 : mfi; 123 mfn = mfn >= 512 ? mfn - 1024 : mfn; 124 mfd += 1; 125 pd += 1; 126 127 return lldiv(2 * (u64)infreq * (mfi * mfd + mfn), 128 mfd * pd); 129 } 130 131 static u32 get_mcu_main_clk(void) 132 { 133 u32 arm_div = 0, fi = 0, fd = 0; 134 struct ccm_regs *ccm = 135 (struct ccm_regs *)IMX_CCM_BASE; 136 arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd); 137 fi *= decode_pll(readl(&ccm->mpctl), MXC_HCLK); 138 return fi / (arm_div * fd); 139 } 140 141 static u32 get_ipg_clk(void) 142 { 143 u32 freq = get_mcu_main_clk(); 144 struct ccm_regs *ccm = 145 (struct ccm_regs *)IMX_CCM_BASE; 146 u32 pdr0 = readl(&ccm->pdr0); 147 148 return freq / (get_ahb_div(pdr0) * 2); 149 } 150 151 static u32 get_ipg_per_clk(void) 152 { 153 u32 freq = get_mcu_main_clk(); 154 struct ccm_regs *ccm = 155 (struct ccm_regs *)IMX_CCM_BASE; 156 u32 pdr0 = readl(&ccm->pdr0); 157 u32 pdr4 = readl(&ccm->pdr4); 158 u32 div; 159 if (pdr0 & MXC_CCM_PDR0_PER_SEL) { 160 div = CCM_GET_DIVIDER(pdr4, 161 MXC_CCM_PDR4_PER0_PODF_MASK, 162 MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1; 163 } else { 164 div = CCM_GET_DIVIDER(pdr0, 165 MXC_CCM_PDR0_PER_PODF_MASK, 166 MXC_CCM_PDR0_PER_PODF_OFFSET) + 1; 167 div *= get_ahb_div(pdr0); 168 } 169 return freq / div; 170 } 171 172 u32 imx_get_uartclk(void) 173 { 174 u32 freq; 175 struct ccm_regs *ccm = 176 (struct ccm_regs *)IMX_CCM_BASE; 177 u32 pdr4 = readl(&ccm->pdr4); 178 179 if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U) 180 freq = get_mcu_main_clk(); 181 else 182 freq = decode_pll(readl(&ccm->ppctl), MXC_HCLK); 183 freq /= CCM_GET_DIVIDER(pdr4, 184 MXC_CCM_PDR4_UART_PODF_MASK, 185 MXC_CCM_PDR4_UART_PODF_OFFSET) + 1; 186 return freq; 187 } 188 189 unsigned int mxc_get_main_clock(enum mxc_main_clock clk) 190 { 191 u32 nfc_pdf, hsp_podf; 192 u32 pll, ret_val = 0, usb_podf; 193 struct ccm_regs *ccm = 194 (struct ccm_regs *)IMX_CCM_BASE; 195 196 u32 reg = readl(&ccm->pdr0); 197 u32 reg4 = readl(&ccm->pdr4); 198 199 reg |= 0x1; 200 201 switch (clk) { 202 case CPU_CLK: 203 ret_val = get_mcu_main_clk(); 204 break; 205 case AHB_CLK: 206 ret_val = get_mcu_main_clk(); 207 break; 208 case HSP_CLK: 209 if (reg & CLKMODE_CONSUMER) { 210 hsp_podf = (reg >> 20) & 0x3; 211 pll = get_mcu_main_clk(); 212 hsp_podf = hsp_div_table[hsp_podf][(reg>>16)&0xF]; 213 if (hsp_podf > 0) { 214 ret_val = pll / hsp_podf; 215 } else { 216 puts("mismatch HSP with ARM clock setting\n"); 217 ret_val = 0; 218 } 219 } else { 220 ret_val = get_mcu_main_clk(); 221 } 222 break; 223 case IPG_CLK: 224 ret_val = get_ipg_clk(); 225 break; 226 case IPG_PER_CLK: 227 ret_val = get_ipg_per_clk(); 228 break; 229 case NFC_CLK: 230 nfc_pdf = (reg4 >> 28) & 0xF; 231 pll = get_mcu_main_clk(); 232 /* AHB/nfc_pdf */ 233 ret_val = pll / (nfc_pdf + 1); 234 break; 235 case USB_CLK: 236 usb_podf = (reg4 >> 22) & 0x3F; 237 if (reg4 & 0x200) 238 pll = get_mcu_main_clk(); 239 else 240 pll = decode_pll(readl(&ccm->ppctl), MXC_HCLK); 241 242 ret_val = pll / (usb_podf + 1); 243 break; 244 default: 245 printf("Unknown clock: %d\n", clk); 246 break; 247 } 248 249 return ret_val; 250 } 251 unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk) 252 { 253 u32 ret_val = 0, pdf, pre_pdf, clk_sel; 254 struct ccm_regs *ccm = 255 (struct ccm_regs *)IMX_CCM_BASE; 256 u32 mpdr2 = readl(&ccm->pdr2); 257 u32 mpdr3 = readl(&ccm->pdr3); 258 u32 mpdr4 = readl(&ccm->pdr4); 259 260 switch (clk) { 261 case UART1_BAUD: 262 case UART2_BAUD: 263 case UART3_BAUD: 264 clk_sel = mpdr3 & (1 << 14); 265 pdf = (mpdr4 >> 10) & 0x3F; 266 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 267 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); 268 break; 269 case SSI1_BAUD: 270 pre_pdf = (mpdr2 >> 24) & 0x7; 271 pdf = mpdr2 & 0x3F; 272 clk_sel = mpdr2 & (1 << 6); 273 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 274 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / 275 ((pre_pdf + 1) * (pdf + 1)); 276 break; 277 case SSI2_BAUD: 278 pre_pdf = (mpdr2 >> 27) & 0x7; 279 pdf = (mpdr2 >> 8) & 0x3F; 280 clk_sel = mpdr2 & (1 << 6); 281 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 282 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / 283 ((pre_pdf + 1) * (pdf + 1)); 284 break; 285 case CSI_BAUD: 286 clk_sel = mpdr2 & (1 << 7); 287 pdf = (mpdr2 >> 16) & 0x3F; 288 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 289 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); 290 break; 291 case MSHC_CLK: 292 pre_pdf = readl(&ccm->pdr1); 293 clk_sel = (pre_pdf & 0x80); 294 pdf = (pre_pdf >> 22) & 0x3F; 295 pre_pdf = (pre_pdf >> 28) & 0x7; 296 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 297 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / 298 ((pre_pdf + 1) * (pdf + 1)); 299 break; 300 case ESDHC1_CLK: 301 clk_sel = mpdr3 & 0x40; 302 pdf = mpdr3 & 0x3F; 303 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 304 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); 305 break; 306 case ESDHC2_CLK: 307 clk_sel = mpdr3 & 0x40; 308 pdf = (mpdr3 >> 8) & 0x3F; 309 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 310 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); 311 break; 312 case ESDHC3_CLK: 313 clk_sel = mpdr3 & 0x40; 314 pdf = (mpdr3 >> 16) & 0x3F; 315 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 316 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); 317 break; 318 case SPDIF_CLK: 319 clk_sel = mpdr3 & 0x400000; 320 pre_pdf = (mpdr3 >> 29) & 0x7; 321 pdf = (mpdr3 >> 23) & 0x3F; 322 ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : 323 decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / 324 ((pre_pdf + 1) * (pdf + 1)); 325 break; 326 default: 327 printf("%s(): This clock: %d not supported yet\n", 328 __func__, clk); 329 break; 330 } 331 332 return ret_val; 333 } 334 335 unsigned int mxc_get_clock(enum mxc_clock clk) 336 { 337 switch (clk) { 338 case MXC_ARM_CLK: 339 return get_mcu_main_clk(); 340 case MXC_AHB_CLK: 341 break; 342 case MXC_IPG_CLK: 343 return get_ipg_clk(); 344 case MXC_IPG_PERCLK: 345 case MXC_I2C_CLK: 346 return get_ipg_per_clk(); 347 case MXC_UART_CLK: 348 return imx_get_uartclk(); 349 case MXC_ESDHC1_CLK: 350 return mxc_get_peri_clock(ESDHC1_CLK); 351 case MXC_ESDHC2_CLK: 352 return mxc_get_peri_clock(ESDHC2_CLK); 353 case MXC_ESDHC3_CLK: 354 return mxc_get_peri_clock(ESDHC3_CLK); 355 case MXC_USB_CLK: 356 return mxc_get_main_clock(USB_CLK); 357 case MXC_FEC_CLK: 358 return get_ipg_clk(); 359 case MXC_CSPI_CLK: 360 return get_ipg_clk(); 361 } 362 return -1; 363 } 364 365 #ifdef CONFIG_FEC_MXC 366 /* 367 * The MX35 has no fuse for MAC, return a NULL MAC 368 */ 369 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) 370 { 371 memset(mac, 0, 6); 372 } 373 374 u32 imx_get_fecclk(void) 375 { 376 return mxc_get_clock(MXC_IPG_CLK); 377 } 378 #endif 379 380 int do_mx35_showclocks(cmd_tbl_t *cmdtp, 381 int flag, int argc, char * const argv[]) 382 { 383 u32 cpufreq = get_mcu_main_clk(); 384 printf("mx35 cpu clock: %dMHz\n", cpufreq / 1000000); 385 printf("ipg clock : %dHz\n", get_ipg_clk()); 386 printf("ipg per clock : %dHz\n", get_ipg_per_clk()); 387 printf("uart clock : %dHz\n", mxc_get_clock(MXC_UART_CLK)); 388 389 return 0; 390 } 391 392 U_BOOT_CMD( 393 clocks, CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks, 394 "display clocks", 395 "" 396 ); 397 398 #if defined(CONFIG_DISPLAY_CPUINFO) 399 static char *get_reset_cause(void) 400 { 401 /* read RCSR register from CCM module */ 402 struct ccm_regs *ccm = 403 (struct ccm_regs *)IMX_CCM_BASE; 404 405 u32 cause = readl(&ccm->rcsr) & 0x0F; 406 407 switch (cause) { 408 case 0x0000: 409 return "POR"; 410 case 0x0002: 411 return "JTAG"; 412 case 0x0004: 413 return "RST"; 414 case 0x0008: 415 return "WDOG"; 416 default: 417 return "unknown reset"; 418 } 419 } 420 421 int print_cpuinfo(void) 422 { 423 u32 srev = get_cpu_rev(); 424 425 printf("CPU: Freescale i.MX35 rev %d.%d at %d MHz.\n", 426 (srev & 0xF0) >> 4, (srev & 0x0F), 427 get_mcu_main_clk() / 1000000); 428 429 printf("Reset cause: %s\n", get_reset_cause()); 430 431 return 0; 432 } 433 #endif 434 435 /* 436 * Initializes on-chip ethernet controllers. 437 * to override, implement board_eth_init() 438 */ 439 int cpu_eth_init(bd_t *bis) 440 { 441 int rc = -ENODEV; 442 443 #if defined(CONFIG_FEC_MXC) 444 rc = fecmxc_initialize(bis); 445 #endif 446 447 return rc; 448 } 449 450 #ifdef CONFIG_FSL_ESDHC 451 /* 452 * Initializes on-chip MMC controllers. 453 * to override, implement board_mmc_init() 454 */ 455 int cpu_mmc_init(bd_t *bis) 456 { 457 return fsl_esdhc_mmc_init(bis); 458 } 459 #endif 460 461 int get_clocks(void) 462 { 463 #ifdef CONFIG_FSL_ESDHC 464 #if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR 465 gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 466 #elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR 467 gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 468 #else 469 gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); 470 #endif 471 #endif 472 return 0; 473 } 474 475 #define RCSR_MEM_CTL_WEIM 0 476 #define RCSR_MEM_CTL_NAND 1 477 #define RCSR_MEM_CTL_ATA 2 478 #define RCSR_MEM_CTL_EXPANSION 3 479 #define RCSR_MEM_TYPE_NOR 0 480 #define RCSR_MEM_TYPE_ONENAND 2 481 #define RCSR_MEM_TYPE_SD 0 482 #define RCSR_MEM_TYPE_I2C 2 483 #define RCSR_MEM_TYPE_SPI 3 484 485 u32 spl_boot_device(void) 486 { 487 struct ccm_regs *ccm = 488 (struct ccm_regs *)IMX_CCM_BASE; 489 490 u32 rcsr = readl(&ccm->rcsr); 491 u32 mem_type, mem_ctl; 492 493 /* In external mode, no boot device is returned */ 494 if ((rcsr >> 10) & 0x03) 495 return BOOT_DEVICE_NONE; 496 497 mem_ctl = (rcsr >> 25) & 0x03; 498 mem_type = (rcsr >> 23) & 0x03; 499 500 switch (mem_ctl) { 501 case RCSR_MEM_CTL_WEIM: 502 switch (mem_type) { 503 case RCSR_MEM_TYPE_NOR: 504 return BOOT_DEVICE_NOR; 505 case RCSR_MEM_TYPE_ONENAND: 506 return BOOT_DEVICE_ONENAND; 507 default: 508 return BOOT_DEVICE_NONE; 509 } 510 case RCSR_MEM_CTL_NAND: 511 return BOOT_DEVICE_NAND; 512 case RCSR_MEM_CTL_EXPANSION: 513 switch (mem_type) { 514 case RCSR_MEM_TYPE_SD: 515 return BOOT_DEVICE_MMC1; 516 case RCSR_MEM_TYPE_I2C: 517 return BOOT_DEVICE_I2C; 518 case RCSR_MEM_TYPE_SPI: 519 return BOOT_DEVICE_SPI; 520 default: 521 return BOOT_DEVICE_NONE; 522 } 523 } 524 525 return BOOT_DEVICE_NONE; 526 } 527 528 #ifdef CONFIG_SPL_BUILD 529 u32 spl_boot_mode(const u32 boot_device) 530 { 531 switch (spl_boot_device()) { 532 case BOOT_DEVICE_MMC1: 533 #ifdef CONFIG_SPL_FAT_SUPPORT 534 return MMCSD_MODE_FS; 535 #else 536 return MMCSD_MODE_RAW; 537 #endif 538 break; 539 case BOOT_DEVICE_NAND: 540 return 0; 541 break; 542 default: 543 puts("spl: ERROR: unsupported device\n"); 544 hang(); 545 } 546 } 547 #endif 548