1 /* 2 * (C) Copyright 2007 3 * Sascha Hauer, Pengutronix 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #include <common.h> 25 #include <asm/arch/imx-regs.h> 26 #include <asm/arch/clock.h> 27 #include <asm/io.h> 28 #include <asm/arch/sys_proto.h> 29 30 static u32 mx31_decode_pll(u32 reg, u32 infreq) 31 { 32 u32 mfi = GET_PLL_MFI(reg); 33 u32 mfn = GET_PLL_MFN(reg); 34 u32 mfd = GET_PLL_MFD(reg); 35 u32 pd = GET_PLL_PD(reg); 36 37 mfi = mfi <= 5 ? 5 : mfi; 38 mfd += 1; 39 pd += 1; 40 41 return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) / 42 (mfd * pd)) << 10; 43 } 44 45 static u32 mx31_get_mpl_dpdgck_clk(void) 46 { 47 u32 infreq; 48 49 if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM) 50 infreq = CONFIG_MX31_CLK32 * 1024; 51 else 52 infreq = CONFIG_MX31_HCLK_FREQ; 53 54 return mx31_decode_pll(readl(CCM_MPCTL), infreq); 55 } 56 57 static u32 mx31_get_mcu_main_clk(void) 58 { 59 /* For now we assume mpl_dpdgck_clk == mcu_main_clk 60 * which should be correct for most boards 61 */ 62 return mx31_get_mpl_dpdgck_clk(); 63 } 64 65 static u32 mx31_get_ipg_clk(void) 66 { 67 u32 freq = mx31_get_mcu_main_clk(); 68 u32 pdr0 = readl(CCM_PDR0); 69 70 freq /= GET_PDR0_MAX_PODF(pdr0) + 1; 71 freq /= GET_PDR0_IPG_PODF(pdr0) + 1; 72 73 return freq; 74 } 75 76 /* hsp is the clock for the ipu */ 77 static u32 mx31_get_hsp_clk(void) 78 { 79 u32 freq = mx31_get_mcu_main_clk(); 80 u32 pdr0 = readl(CCM_PDR0); 81 82 freq /= GET_PDR0_HSP_PODF(pdr0) + 1; 83 84 return freq; 85 } 86 87 void mx31_dump_clocks(void) 88 { 89 u32 cpufreq = mx31_get_mcu_main_clk(); 90 printf("mx31 cpu clock: %dMHz\n",cpufreq / 1000000); 91 printf("ipg clock : %dHz\n", mx31_get_ipg_clk()); 92 printf("hsp clock : %dHz\n", mx31_get_hsp_clk()); 93 } 94 95 unsigned int mxc_get_clock(enum mxc_clock clk) 96 { 97 switch (clk) { 98 case MXC_ARM_CLK: 99 return mx31_get_mcu_main_clk(); 100 case MXC_IPG_CLK: 101 case MXC_IPG_PERCLK: 102 case MXC_CSPI_CLK: 103 case MXC_UART_CLK: 104 return mx31_get_ipg_clk(); 105 case MXC_IPU_CLK: 106 return mx31_get_hsp_clk(); 107 } 108 return -1; 109 } 110 111 u32 imx_get_uartclk(void) 112 { 113 return mxc_get_clock(MXC_UART_CLK); 114 } 115 116 void mx31_gpio_mux(unsigned long mode) 117 { 118 unsigned long reg, shift, tmp; 119 120 reg = IOMUXC_BASE + (mode & 0x1fc); 121 shift = (~mode & 0x3) * 8; 122 123 tmp = readl(reg); 124 tmp &= ~(0xff << shift); 125 tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift; 126 writel(tmp, reg); 127 } 128 129 void mx31_set_pad(enum iomux_pins pin, u32 config) 130 { 131 u32 field, l, reg; 132 133 pin &= IOMUX_PADNUM_MASK; 134 reg = (IOMUXC_BASE + 0x154) + (pin + 2) / 3 * 4; 135 field = (pin + 2) % 3; 136 137 l = readl(reg); 138 l &= ~(0x1ff << (field * 10)); 139 l |= config << (field * 10); 140 writel(l, reg); 141 142 } 143 144 void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs) 145 { 146 struct mx31_weim *weim = (struct mx31_weim *) WEIM_BASE; 147 struct mx31_weim_cscr *cscr = &weim->cscr[cs]; 148 149 writel(weimcs->upper, &cscr->upper); 150 writel(weimcs->lower, &cscr->lower); 151 writel(weimcs->additional, &cscr->additional); 152 } 153 154 struct mx3_cpu_type mx31_cpu_type[] = { 155 { .srev = 0x00, .v = 0x10 }, 156 { .srev = 0x10, .v = 0x11 }, 157 { .srev = 0x11, .v = 0x11 }, 158 { .srev = 0x12, .v = 0x1F }, 159 { .srev = 0x13, .v = 0x1F }, 160 { .srev = 0x14, .v = 0x12 }, 161 { .srev = 0x15, .v = 0x12 }, 162 { .srev = 0x28, .v = 0x20 }, 163 { .srev = 0x29, .v = 0x20 }, 164 }; 165 166 u32 get_cpu_rev(void) 167 { 168 u32 i, srev; 169 170 /* read SREV register from IIM module */ 171 struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR; 172 srev = readl(&iim->iim_srev); 173 174 for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) 175 if (srev == mx31_cpu_type[i].srev) 176 return mx31_cpu_type[i].v; 177 178 return srev | 0x8000; 179 } 180 181 static char *get_reset_cause(void) 182 { 183 /* read RCSR register from CCM module */ 184 struct clock_control_regs *ccm = 185 (struct clock_control_regs *)CCM_BASE; 186 187 u32 cause = readl(&ccm->rcsr) & 0x07; 188 189 switch (cause) { 190 case 0x0000: 191 return "POR"; 192 case 0x0001: 193 return "RST"; 194 case 0x0002: 195 return "WDOG"; 196 case 0x0006: 197 return "JTAG"; 198 default: 199 return "unknown reset"; 200 } 201 } 202 203 #if defined(CONFIG_DISPLAY_CPUINFO) 204 int print_cpuinfo (void) 205 { 206 u32 srev = get_cpu_rev(); 207 208 printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.\n", 209 (srev & 0xF0) >> 4, (srev & 0x0F), 210 ((srev & 0x8000) ? " unknown" : ""), 211 mx31_get_mcu_main_clk() / 1000000); 212 printf("Reset cause: %s\n", get_reset_cause()); 213 return 0; 214 } 215 #endif 216