1 /* 2 * 3 * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> 4 * 5 * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <asm/arch/imx-regs.h> 12 #include <asm/arch/clock.h> 13 14 void mx31_uart1_hw_init(void) 15 { 16 /* setup pins for UART1 */ 17 mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); 18 mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); 19 mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); 20 mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); 21 } 22 23 void mx31_uart2_hw_init(void) 24 { 25 /* setup pins for UART2 */ 26 mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX); 27 mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX); 28 mx31_gpio_mux(MUX_RTS2__UART2_RTS_B); 29 mx31_gpio_mux(MUX_CTS2__UART2_CTS_B); 30 } 31 32 #ifdef CONFIG_MXC_SPI 33 /* 34 * Note: putting several spi setups here makes no sense as they may differ 35 * at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3) 36 */ 37 void mx31_spi2_hw_init(void) 38 { 39 /* SPI2 */ 40 mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B); 41 mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); 42 mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); 43 mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); 44 mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); 45 mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); 46 mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B); 47 48 /* start SPI2 clock */ 49 __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4); 50 } 51 #endif 52