xref: /openbmc/u-boot/arch/arm/config.mk (revision 983c72f4)
1#
2# (C) Copyright 2000-2002
3# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4#
5# See file CREDITS for list of people who contributed to this
6# project.
7#
8# This program is free software; you can redistribute it and/or
9# modify it under the terms of the GNU General Public License as
10# published by the Free Software Foundation; either version 2 of
11# the License, or (at your option) any later version.
12#
13# This program is distributed in the hope that it will be useful,
14# but WITHOUT ANY WARRANTY; without even the implied warranty of
15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16# GNU General Public License for more details.
17#
18# You should have received a copy of the GNU General Public License
19# along with this program; if not, write to the Free Software
20# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21# MA 02111-1307 USA
22#
23
24CROSS_COMPILE ?= arm-linux-
25
26ifndef CONFIG_STANDALONE_LOAD_ADDR
27ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
28CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
29else
30CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
31endif
32endif
33
34LDFLAGS_FINAL += --gc-sections
35PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
36
37# Support generic board on ARM
38__HAVE_ARCH_GENERIC_BOARD := y
39
40PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
41
42# Choose between ARM/Thumb instruction sets
43ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
44PF_CPPFLAGS_ARM := $(call cc-option, -mthumb -mthumb-interwork,\
45			$(call cc-option,-marm,)\
46			$(call cc-option,-mno-thumb-interwork,)\
47		)
48else
49PF_CPPFLAGS_ARM := $(call cc-option,-marm,) \
50		$(call cc-option,-mno-thumb-interwork,)
51endif
52
53# Only test once
54ifneq ($(CONFIG_SPL_BUILD),y)
55ALL-$(CONFIG_SYS_THUMB_BUILD)	+= checkthumb
56endif
57
58# Try if EABI is supported, else fall back to old API,
59# i. e. for example:
60# - with ELDK 4.2 (EABI supported), use:
61#	-mabi=aapcs-linux
62# - with ELDK 4.1 (gcc 4.x, no EABI), use:
63#	-mabi=apcs-gnu
64# - with ELDK 3.1 (gcc 3.x), use:
65#	-mapcs-32
66PF_CPPFLAGS_ABI := $(call cc-option,\
67			-mabi=aapcs-linux,\
68			$(call cc-option,\
69				-mapcs-32,\
70				$(call cc-option,\
71					-mabi=apcs-gnu,\
72				)\
73			)\
74		)
75PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARM) $(PF_CPPFLAGS_ABI)
76
77# For EABI, make sure to provide raise()
78ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
79# This file is parsed many times, so the string may get added multiple
80# times. Also, the prefix needs to be different based on whether
81# CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry
82# before adding the correct one.
83ifdef CONFIG_SPL_BUILD
84PLATFORM_LIBS := $(SPLTREE)/arch/arm/lib/eabi_compat.o \
85	$(filter-out %/arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS))
86else
87PLATFORM_LIBS := $(OBJTREE)/arch/arm/lib/eabi_compat.o \
88	$(filter-out %/arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS))
89endif
90endif
91
92# needed for relocation
93LDFLAGS_u-boot += -pie
94
95#
96# FIXME: binutils versions < 2.22 have a bug in the assembler where
97# branches to weak symbols can be incorrectly optimized in thumb mode
98# to a short branch (b.n instruction) that won't reach when the symbol
99# gets preempted
100#
101# http://sourceware.org/bugzilla/show_bug.cgi?id=12532
102#
103ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
104ifeq ($(GAS_BUG_12532),)
105export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
106	then echo y; else echo n; fi)
107endif
108ifeq ($(GAS_BUG_12532),y)
109PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
110endif
111endif
112
113# check that only R_ARM_RELATIVE relocations are generated
114ifneq ($(CONFIG_SPL_BUILD),y)
115ALL-y	+= checkarmreloc
116endif
117