1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config ARCH_BCM6858 532 bool "Broadcom BCM6858 family" 533 select DM 534 select OF_CONTROL 535 imply CMD_DM 536 537config TARGET_VEXPRESS_CA15_TC2 538 bool "Support vexpress_ca15_tc2" 539 select CPU_V7A 540 select CPU_V7_HAS_NONSEC 541 select CPU_V7_HAS_VIRT 542 select PL011_SERIAL 543 544config ARCH_BCMSTB 545 bool "Broadcom BCM7XXX family" 546 select CPU_V7A 547 select DM 548 select OF_CONTROL 549 select OF_PRIOR_STAGE 550 imply CMD_DM 551 help 552 This enables support for Broadcom ARM-based set-top box 553 chipsets, including the 7445 family of chips. 554 555config TARGET_VEXPRESS_CA5X2 556 bool "Support vexpress_ca5x2" 557 select CPU_V7A 558 select PL011_SERIAL 559 560config TARGET_VEXPRESS_CA9X4 561 bool "Support vexpress_ca9x4" 562 select CPU_V7A 563 select PL011_SERIAL 564 565config TARGET_BCM23550_W1D 566 bool "Support bcm23550_w1d" 567 select CPU_V7A 568 imply CRC32_VERIFY 569 imply FAT_WRITE 570 571config TARGET_BCM28155_AP 572 bool "Support bcm28155_ap" 573 select CPU_V7A 574 imply CRC32_VERIFY 575 imply FAT_WRITE 576 577config TARGET_BCMCYGNUS 578 bool "Support bcmcygnus" 579 select CPU_V7A 580 imply BCM_SF2_ETH 581 imply BCM_SF2_ETH_GMAC 582 imply CMD_HASH 583 imply CRC32_VERIFY 584 imply FAT_WRITE 585 imply HASH_VERIFY 586 imply NETDEVICES 587 588config TARGET_BCMNSP 589 bool "Support bcmnsp" 590 select CPU_V7A 591 592config TARGET_BCMNS2 593 bool "Support Broadcom Northstar2" 594 select ARM64 595 help 596 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 597 ARMv8 Cortex-A57 processors targeting a broad range of networking 598 applications 599 600config ARCH_EXYNOS 601 bool "Samsung EXYNOS" 602 select DM 603 select DM_GPIO 604 select DM_I2C 605 select DM_KEYBOARD 606 select DM_SERIAL 607 select DM_SPI 608 select DM_SPI_FLASH 609 select SPI 610 imply CMD_DM 611 imply FAT_WRITE 612 613config ARCH_S5PC1XX 614 bool "Samsung S5PC1XX" 615 select CPU_V7A 616 select DM 617 select DM_GPIO 618 select DM_I2C 619 select DM_SERIAL 620 imply CMD_DM 621 622config ARCH_HIGHBANK 623 bool "Calxeda Highbank" 624 select CPU_V7A 625 select PL011_SERIAL 626 627config ARCH_INTEGRATOR 628 bool "ARM Ltd. Integrator family" 629 select DM 630 select DM_SERIAL 631 select PL01X_SERIAL 632 imply CMD_DM 633 634config ARCH_KEYSTONE 635 bool "TI Keystone" 636 select CMD_POWEROFF 637 select CPU_V7A 638 select SUPPORT_SPL 639 select SYS_ARCH_TIMER 640 select SYS_THUMB_BUILD 641 imply CMD_MTDPARTS 642 imply CMD_SAVES 643 imply FIT 644 645config ARCH_K3 646 bool "Texas Instruments' K3 Architecture" 647 select SPL 648 select SUPPORT_SPL 649 select FIT 650 651config ARCH_OMAP2PLUS 652 bool "TI OMAP2+" 653 select CPU_V7A 654 select SPL_BOARD_INIT if SPL 655 select SPL_STACK_R if SPL 656 select SUPPORT_SPL 657 imply FIT 658 659config ARCH_MESON 660 bool "Amlogic Meson" 661 imply DISTRO_DEFAULTS 662 help 663 Support for the Meson SoC family developed by Amlogic Inc., 664 targeted at media players and tablet computers. We currently 665 support the S905 (GXBaby) 64-bit SoC. 666 667config ARCH_LPC32XX 668 bool "NXP LPC32xx platform" 669 select CPU_ARM926EJS 670 select DM 671 select DM_GPIO 672 select DM_SERIAL 673 select SPL_DM if SPL 674 select SUPPORT_SPL 675 imply CMD_DM 676 677config ARCH_IMX8 678 bool "NXP i.MX8 platform" 679 select ARM64 680 select DM 681 select OF_CONTROL 682 683config ARCH_MX8M 684 bool "NXP i.MX8M platform" 685 select ARM64 686 select DM 687 select SUPPORT_SPL 688 imply CMD_DM 689 690config ARCH_MX23 691 bool "NXP i.MX23 family" 692 select CPU_ARM926EJS 693 select PL011_SERIAL 694 select SUPPORT_SPL 695 696config ARCH_MX25 697 bool "NXP MX25" 698 select CPU_ARM926EJS 699 imply MXC_GPIO 700 701config ARCH_MX28 702 bool "NXP i.MX28 family" 703 select CPU_ARM926EJS 704 select PL011_SERIAL 705 select SUPPORT_SPL 706 707config ARCH_MX31 708 bool "NXP i.MX31 family" 709 select CPU_ARM1136 710 711config ARCH_MX7ULP 712 bool "NXP MX7ULP" 713 select CPU_V7A 714 select ROM_UNIFIED_SECTIONS 715 imply MXC_GPIO 716 717config ARCH_MX7 718 bool "Freescale MX7" 719 select ARCH_MISC_INIT 720 select BOARD_EARLY_INIT_F 721 select CPU_V7A 722 select SYS_FSL_HAS_SEC if SECURE_BOOT 723 select SYS_FSL_SEC_COMPAT_4 724 select SYS_FSL_SEC_LE 725 imply MXC_GPIO 726 727config ARCH_MX6 728 bool "Freescale MX6" 729 select CPU_V7A 730 select SYS_FSL_HAS_SEC if SECURE_BOOT 731 select SYS_FSL_SEC_COMPAT_4 732 select SYS_FSL_SEC_LE 733 select SYS_THUMB_BUILD if SPL 734 imply MXC_GPIO 735 736if ARCH_MX6 737config SPL_LDSCRIPT 738 default "arch/arm/mach-omap2/u-boot-spl.lds" 739endif 740 741config ARCH_MX5 742 bool "Freescale MX5" 743 select BOARD_EARLY_INIT_F 744 select CPU_V7A 745 imply MXC_GPIO 746 747config ARCH_OWL 748 bool "Actions Semi OWL SoCs" 749 select ARM64 750 select DM 751 select DM_SERIAL 752 select OF_CONTROL 753 imply CMD_DM 754 755config ARCH_QEMU 756 bool "QEMU Virtual Platform" 757 select DM 758 select DM_SERIAL 759 select OF_CONTROL 760 select PL01X_SERIAL 761 imply CMD_DM 762 imply DM_RTC 763 imply RTC_PL031 764 765config ARCH_RMOBILE 766 bool "Renesas ARM SoCs" 767 select BOARD_EARLY_INIT_F 768 select DM 769 select DM_SERIAL 770 imply CMD_DM 771 imply FAT_WRITE 772 imply SYS_THUMB_BUILD 773 774config TARGET_S32V234EVB 775 bool "Support s32v234evb" 776 select ARM64 777 select SYS_FSL_ERRATUM_ESDHC111 778 779config ARCH_SNAPDRAGON 780 bool "Qualcomm Snapdragon SoCs" 781 select ARM64 782 select DM 783 select DM_GPIO 784 select DM_SERIAL 785 select MSM_SMEM 786 select OF_CONTROL 787 select OF_SEPARATE 788 select SMEM 789 select SPMI 790 imply CMD_DM 791 792config ARCH_SOCFPGA 793 bool "Altera SOCFPGA family" 794 select ARCH_EARLY_INIT_R 795 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 796 select ARM64 if TARGET_SOCFPGA_STRATIX10 797 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 798 select DM 799 select DM_SERIAL 800 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 801 select OF_CONTROL 802 select SPL_DM_RESET if DM_RESET 803 select SPL_DM_SERIAL 804 select SPL_LIBCOMMON_SUPPORT 805 select SPL_LIBDISK_SUPPORT 806 select SPL_LIBGENERIC_SUPPORT 807 select SPL_MMC_SUPPORT if DM_MMC 808 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 809 select SPL_OF_CONTROL 810 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 811 select SPL_SERIAL_SUPPORT 812 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 813 select SPL_SPI_SUPPORT if DM_SPI 814 select SPL_WATCHDOG_SUPPORT 815 select SUPPORT_SPL 816 select SYS_NS16550 817 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 818 imply CMD_DM 819 imply CMD_MTDPARTS 820 imply CRC32_VERIFY 821 imply DM_SPI 822 imply DM_SPI_FLASH 823 imply FAT_WRITE 824 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 825 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 826 827config ARCH_SUNXI 828 bool "Support sunxi (Allwinner) SoCs" 829 select BINMAN 830 select CMD_GPIO 831 select CMD_MMC if MMC 832 select CMD_USB if DISTRO_DEFAULTS 833 select DM 834 select DM_ETH 835 select DM_GPIO 836 select DM_KEYBOARD 837 select DM_SERIAL 838 select DM_USB if DISTRO_DEFAULTS 839 select OF_BOARD_SETUP 840 select OF_CONTROL 841 select OF_SEPARATE 842 select SPECIFY_CONSOLE_INDEX 843 select SPL_STACK_R if SPL 844 select SPL_SYS_MALLOC_SIMPLE if SPL 845 select SPL_SYS_THUMB_BUILD if !ARM64 846 select SYS_NS16550 847 select SYS_THUMB_BUILD if !ARM64 848 select USB if DISTRO_DEFAULTS 849 select USB_KEYBOARD if DISTRO_DEFAULTS 850 select USB_STORAGE if DISTRO_DEFAULTS 851 select USE_TINY_PRINTF 852 imply CMD_DM 853 imply CMD_GPT 854 imply CMD_UBI if NAND 855 imply DISTRO_DEFAULTS 856 imply FAT_WRITE 857 imply FIT 858 imply OF_LIBFDT_OVERLAY 859 imply PRE_CONSOLE_BUFFER 860 imply SPL_GPIO_SUPPORT 861 imply SPL_LIBCOMMON_SUPPORT 862 imply SPL_LIBDISK_SUPPORT 863 imply SPL_LIBGENERIC_SUPPORT 864 imply SPL_MMC_SUPPORT if MMC 865 imply SPL_POWER_SUPPORT 866 imply SPL_SERIAL_SUPPORT 867 imply USB_GADGET 868 869config ARCH_VERSAL 870 bool "Support Xilinx Versal Platform" 871 select ARM64 872 select CLK 873 select DM 874 select DM_SERIAL 875 select OF_CONTROL 876 877config ARCH_VF610 878 bool "Freescale Vybrid" 879 select CPU_V7A 880 select SYS_FSL_ERRATUM_ESDHC111 881 imply CMD_MTDPARTS 882 imply NAND 883 884config ARCH_ZYNQ 885 bool "Xilinx Zynq based platform" 886 select BOARD_EARLY_INIT_F if WDT 887 select CLK 888 select CLK_ZYNQ 889 select CPU_V7A 890 select DM 891 select DM_ETH if NET 892 select DM_MMC if MMC 893 select DM_SERIAL 894 select DM_SPI 895 select DM_SPI_FLASH 896 select DM_USB if USB 897 select OF_CONTROL 898 select SPI 899 select SPL_BOARD_INIT if SPL 900 select SPL_CLK if SPL 901 select SPL_DM if SPL 902 select SPL_OF_CONTROL if SPL 903 select SPL_SEPARATE_BSS if SPL 904 select SUPPORT_SPL 905 imply ARCH_EARLY_INIT_R 906 imply BOARD_LATE_INIT 907 imply CMD_CLK 908 imply CMD_DM 909 imply CMD_SPL 910 imply FAT_WRITE 911 912config ARCH_ZYNQMP_R5 913 bool "Xilinx ZynqMP R5 based platform" 914 select CLK 915 select CPU_V7R 916 select DM 917 select DM_SERIAL 918 select OF_CONTROL 919 imply CMD_DM 920 921config ARCH_ZYNQMP 922 bool "Xilinx ZynqMP based platform" 923 select ARM64 924 select CLK 925 select DM 926 select DM_SERIAL 927 select DM_USB if USB 928 select OF_CONTROL 929 select SPL_BOARD_INIT if SPL 930 select SPL_CLK if SPL 931 select SPL_SEPARATE_BSS if SPL 932 select SUPPORT_SPL 933 imply BOARD_LATE_INIT 934 imply CMD_DM 935 imply FAT_WRITE 936 imply MP 937 938config TEGRA 939 bool "NVIDIA Tegra" 940 imply DISTRO_DEFAULTS 941 imply FAT_WRITE 942 943config TARGET_VEXPRESS64_AEMV8A 944 bool "Support vexpress_aemv8a" 945 select ARM64 946 select PL01X_SERIAL 947 948config TARGET_VEXPRESS64_BASE_FVP 949 bool "Support Versatile Express ARMv8a FVP BASE model" 950 select ARM64 951 select PL01X_SERIAL 952 select SEMIHOSTING 953 954config TARGET_VEXPRESS64_BASE_FVP_DRAM 955 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 956 select ARM64 957 select PL01X_SERIAL 958 help 959 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 960 the default config to allow the user to load the images directly into 961 DRAM using model parameters rather than by using semi-hosting to load 962 the files from the host filesystem. 963 964config TARGET_VEXPRESS64_JUNO 965 bool "Support Versatile Express Juno Development Platform" 966 select ARM64 967 select PL01X_SERIAL 968 969config TARGET_LS2080A_EMU 970 bool "Support ls2080a_emu" 971 select ARCH_LS2080A 972 select ARCH_MISC_INIT 973 select ARM64 974 select ARMV8_MULTIENTRY 975 help 976 Support for Freescale LS2080A_EMU platform 977 The LS2080A Development System (EMULATOR) is a pre silicon 978 development platform that supports the QorIQ LS2080A 979 Layerscape Architecture processor. 980 981config TARGET_LS2080A_SIMU 982 bool "Support ls2080a_simu" 983 select ARCH_LS2080A 984 select ARCH_MISC_INIT 985 select ARM64 986 select ARMV8_MULTIENTRY 987 help 988 Support for Freescale LS2080A_SIMU platform 989 The LS2080A Development System (QDS) is a pre silicon 990 development platform that supports the QorIQ LS2080A 991 Layerscape Architecture processor. 992 993config TARGET_LS1088AQDS 994 bool "Support ls1088aqds" 995 select ARCH_LS1088A 996 select ARCH_MISC_INIT 997 select ARM64 998 select ARMV8_MULTIENTRY 999 select BOARD_LATE_INIT 1000 select SUPPORT_SPL 1001 help 1002 Support for NXP LS1088AQDS platform 1003 The LS1088A Development System (QDS) is a high-performance 1004 development platform that supports the QorIQ LS1088A 1005 Layerscape Architecture processor. 1006 1007config TARGET_LS2080AQDS 1008 bool "Support ls2080aqds" 1009 select ARCH_LS2080A 1010 select ARCH_MISC_INIT 1011 select ARM64 1012 select ARMV8_MULTIENTRY 1013 select BOARD_LATE_INIT 1014 select SUPPORT_SPL 1015 imply SCSI 1016 imply SCSI_AHCI 1017 help 1018 Support for Freescale LS2080AQDS platform 1019 The LS2080A Development System (QDS) is a high-performance 1020 development platform that supports the QorIQ LS2080A 1021 Layerscape Architecture processor. 1022 1023config TARGET_LS2080ARDB 1024 bool "Support ls2080ardb" 1025 select ARCH_LS2080A 1026 select ARCH_MISC_INIT 1027 select ARM64 1028 select ARMV8_MULTIENTRY 1029 select BOARD_LATE_INIT 1030 select SUPPORT_SPL 1031 imply SCSI 1032 imply SCSI_AHCI 1033 help 1034 Support for Freescale LS2080ARDB platform. 1035 The LS2080A Reference design board (RDB) is a high-performance 1036 development platform that supports the QorIQ LS2080A 1037 Layerscape Architecture processor. 1038 1039config TARGET_LS2081ARDB 1040 bool "Support ls2081ardb" 1041 select ARCH_LS2080A 1042 select ARCH_MISC_INIT 1043 select ARM64 1044 select ARMV8_MULTIENTRY 1045 select BOARD_LATE_INIT 1046 select SUPPORT_SPL 1047 help 1048 Support for Freescale LS2081ARDB platform. 1049 The LS2081A Reference design board (RDB) is a high-performance 1050 development platform that supports the QorIQ LS2081A/LS2041A 1051 Layerscape Architecture processor. 1052 1053config TARGET_HIKEY 1054 bool "Support HiKey 96boards Consumer Edition Platform" 1055 select ARM64 1056 select DM 1057 select DM_GPIO 1058 select DM_SERIAL 1059 select OF_CONTROL 1060 select PL01X_SERIAL 1061 select SPECIFY_CONSOLE_INDEX 1062 imply CMD_DM 1063 help 1064 Support for HiKey 96boards platform. It features a HI6220 1065 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1066 1067config TARGET_POPLAR 1068 bool "Support Poplar 96boards Enterprise Edition Platform" 1069 select ARM64 1070 select DM 1071 select DM_SERIAL 1072 select DM_USB 1073 select OF_CONTROL 1074 select PL01X_SERIAL 1075 imply CMD_DM 1076 help 1077 Support for Poplar 96boards EE platform. It features a HI3798cv200 1078 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1079 making it capable of running any commercial set-top solution based on 1080 Linux or Android. 1081 1082config TARGET_LS1012AQDS 1083 bool "Support ls1012aqds" 1084 select ARCH_LS1012A 1085 select ARM64 1086 select BOARD_LATE_INIT 1087 help 1088 Support for Freescale LS1012AQDS platform. 1089 The LS1012A Development System (QDS) is a high-performance 1090 development platform that supports the QorIQ LS1012A 1091 Layerscape Architecture processor. 1092 1093config TARGET_LS1012ARDB 1094 bool "Support ls1012ardb" 1095 select ARCH_LS1012A 1096 select ARM64 1097 select BOARD_LATE_INIT 1098 imply SCSI 1099 imply SCSI_AHCI 1100 help 1101 Support for Freescale LS1012ARDB platform. 1102 The LS1012A Reference design board (RDB) is a high-performance 1103 development platform that supports the QorIQ LS1012A 1104 Layerscape Architecture processor. 1105 1106config TARGET_LS1012A2G5RDB 1107 bool "Support ls1012a2g5rdb" 1108 select ARCH_LS1012A 1109 select ARM64 1110 select BOARD_LATE_INIT 1111 imply SCSI 1112 help 1113 Support for Freescale LS1012A2G5RDB platform. 1114 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1115 development platform that supports the QorIQ LS1012A 1116 Layerscape Architecture processor. 1117 1118config TARGET_LS1012AFRWY 1119 bool "Support ls1012afrwy" 1120 select ARCH_LS1012A 1121 select ARM64 1122 select BOARD_LATE_INIT 1123 imply SCSI 1124 imply SCSI_AHCI 1125 help 1126 Support for Freescale LS1012AFRWY platform. 1127 The LS1012A FRWY board (FRWY) is a high-performance 1128 development platform that supports the QorIQ LS1012A 1129 Layerscape Architecture processor. 1130 1131config TARGET_LS1012AFRDM 1132 bool "Support ls1012afrdm" 1133 select ARCH_LS1012A 1134 select ARM64 1135 help 1136 Support for Freescale LS1012AFRDM platform. 1137 The LS1012A Freedom board (FRDM) is a high-performance 1138 development platform that supports the QorIQ LS1012A 1139 Layerscape Architecture processor. 1140 1141config TARGET_LS1088ARDB 1142 bool "Support ls1088ardb" 1143 select ARCH_LS1088A 1144 select ARCH_MISC_INIT 1145 select ARM64 1146 select ARMV8_MULTIENTRY 1147 select BOARD_LATE_INIT 1148 select SUPPORT_SPL 1149 help 1150 Support for NXP LS1088ARDB platform. 1151 The LS1088A Reference design board (RDB) is a high-performance 1152 development platform that supports the QorIQ LS1088A 1153 Layerscape Architecture processor. 1154 1155config TARGET_LS1021AQDS 1156 bool "Support ls1021aqds" 1157 select ARCH_LS1021A 1158 select ARCH_SUPPORT_PSCI 1159 select BOARD_EARLY_INIT_F 1160 select BOARD_LATE_INIT 1161 select CPU_V7A 1162 select CPU_V7_HAS_NONSEC 1163 select CPU_V7_HAS_VIRT 1164 select LS1_DEEP_SLEEP 1165 select SUPPORT_SPL 1166 select SYS_FSL_DDR 1167 imply SCSI 1168 1169config TARGET_LS1021ATWR 1170 bool "Support ls1021atwr" 1171 select ARCH_LS1021A 1172 select ARCH_SUPPORT_PSCI 1173 select BOARD_EARLY_INIT_F 1174 select BOARD_LATE_INIT 1175 select CPU_V7A 1176 select CPU_V7_HAS_NONSEC 1177 select CPU_V7_HAS_VIRT 1178 select LS1_DEEP_SLEEP 1179 select SUPPORT_SPL 1180 imply SCSI 1181 1182config TARGET_LS1021AIOT 1183 bool "Support ls1021aiot" 1184 select ARCH_LS1021A 1185 select ARCH_SUPPORT_PSCI 1186 select BOARD_LATE_INIT 1187 select CPU_V7A 1188 select CPU_V7_HAS_NONSEC 1189 select CPU_V7_HAS_VIRT 1190 select SUPPORT_SPL 1191 imply SCSI 1192 help 1193 Support for Freescale LS1021AIOT platform. 1194 The LS1021A Freescale board (IOT) is a high-performance 1195 development platform that supports the QorIQ LS1021A 1196 Layerscape Architecture processor. 1197 1198config TARGET_LS1043AQDS 1199 bool "Support ls1043aqds" 1200 select ARCH_LS1043A 1201 select ARM64 1202 select ARMV8_MULTIENTRY 1203 select BOARD_EARLY_INIT_F 1204 select BOARD_LATE_INIT 1205 select SUPPORT_SPL 1206 imply SCSI 1207 help 1208 Support for Freescale LS1043AQDS platform. 1209 1210config TARGET_LS1043ARDB 1211 bool "Support ls1043ardb" 1212 select ARCH_LS1043A 1213 select ARM64 1214 select ARMV8_MULTIENTRY 1215 select BOARD_EARLY_INIT_F 1216 select BOARD_LATE_INIT 1217 select SUPPORT_SPL 1218 imply SCSI 1219 help 1220 Support for Freescale LS1043ARDB platform. 1221 1222config TARGET_LS1046AQDS 1223 bool "Support ls1046aqds" 1224 select ARCH_LS1046A 1225 select ARM64 1226 select ARMV8_MULTIENTRY 1227 select BOARD_EARLY_INIT_F 1228 select BOARD_LATE_INIT 1229 select DM_SPI_FLASH if DM_SPI 1230 select SUPPORT_SPL 1231 imply SCSI 1232 help 1233 Support for Freescale LS1046AQDS platform. 1234 The LS1046A Development System (QDS) is a high-performance 1235 development platform that supports the QorIQ LS1046A 1236 Layerscape Architecture processor. 1237 1238config TARGET_LS1046ARDB 1239 bool "Support ls1046ardb" 1240 select ARCH_LS1046A 1241 select ARM64 1242 select ARMV8_MULTIENTRY 1243 select BOARD_EARLY_INIT_F 1244 select BOARD_LATE_INIT 1245 select DM_SPI_FLASH if DM_SPI 1246 select POWER_MC34VR500 1247 select SUPPORT_SPL 1248 imply SCSI 1249 help 1250 Support for Freescale LS1046ARDB platform. 1251 The LS1046A Reference Design Board (RDB) is a high-performance 1252 development platform that supports the QorIQ LS1046A 1253 Layerscape Architecture processor. 1254 1255config TARGET_H2200 1256 bool "Support h2200" 1257 select CPU_PXA 1258 1259config TARGET_ZIPITZ2 1260 bool "Support zipitz2" 1261 select CPU_PXA 1262 1263config TARGET_COLIBRI_PXA270 1264 bool "Support colibri_pxa270" 1265 select CPU_PXA 1266 1267config ARCH_UNIPHIER 1268 bool "Socionext UniPhier SoCs" 1269 select BOARD_LATE_INIT 1270 select DM 1271 select DM_GPIO 1272 select DM_I2C 1273 select DM_MMC 1274 select DM_RESET 1275 select DM_SERIAL 1276 select DM_USB 1277 select OF_BOARD_SETUP 1278 select OF_CONTROL 1279 select OF_LIBFDT 1280 select PINCTRL 1281 select SPL_BOARD_INIT if SPL 1282 select SPL_DM if SPL 1283 select SPL_LIBCOMMON_SUPPORT if SPL 1284 select SPL_LIBGENERIC_SUPPORT if SPL 1285 select SPL_OF_CONTROL if SPL 1286 select SPL_PINCTRL if SPL 1287 select SUPPORT_SPL 1288 imply CMD_DM 1289 imply DISTRO_DEFAULTS 1290 imply FAT_WRITE 1291 help 1292 Support for UniPhier SoC family developed by Socionext Inc. 1293 (formerly, System LSI Business Division of Panasonic Corporation) 1294 1295config STM32 1296 bool "Support STMicroelectronics STM32 MCU with cortex M" 1297 select CPU_V7M 1298 select DM 1299 select DM_SERIAL 1300 imply CMD_DM 1301 1302config ARCH_STI 1303 bool "Support STMicrolectronics SoCs" 1304 select BLK 1305 select CPU_V7A 1306 select DM 1307 select DM_MMC 1308 select DM_RESET 1309 select DM_SERIAL 1310 imply CMD_DM 1311 help 1312 Support for STMicroelectronics STiH407/10 SoC family. 1313 This SoC is used on Linaro 96Board STiH410-B2260 1314 1315config ARCH_STM32MP 1316 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1317 select ARCH_MISC_INIT 1318 select BOARD_LATE_INIT 1319 select CLK 1320 select DM 1321 select DM_GPIO 1322 select DM_RESET 1323 select DM_SERIAL 1324 select MISC 1325 select OF_CONTROL 1326 select OF_LIBFDT 1327 select PINCTRL 1328 select REGMAP 1329 select SUPPORT_SPL 1330 select SYSCON 1331 select SYSRESET 1332 select SYS_THUMB_BUILD 1333 imply CMD_DM 1334 help 1335 Support for STM32MP SoC family developed by STMicroelectronics, 1336 MPUs based on ARM cortex A core 1337 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1338 BootLoader (FSBL) 1339 1340config ARCH_ROCKCHIP 1341 bool "Support Rockchip SoCs" 1342 select BLK 1343 select DM 1344 select DM_GPIO 1345 select DM_I2C 1346 select DM_MMC 1347 select DM_PWM 1348 select DM_REGULATOR 1349 select DM_SERIAL 1350 select DM_SPI 1351 select DM_SPI_FLASH 1352 select DM_USB if USB 1353 select ENABLE_ARM_SOC_BOOT0_HOOK 1354 select OF_CONTROL 1355 select SPI 1356 select SPL_DM if SPL 1357 select SPL_SYS_MALLOC_SIMPLE if SPL 1358 select SYS_MALLOC_F 1359 select SYS_THUMB_BUILD if !ARM64 1360 imply ADC 1361 imply CMD_DM 1362 imply DISTRO_DEFAULTS 1363 imply FAT_WRITE 1364 imply SARADC_ROCKCHIP 1365 imply SPL_SYSRESET 1366 imply SYS_NS16550 1367 imply TPL_SYSRESET 1368 imply USB_FUNCTION_FASTBOOT 1369 1370config TARGET_THUNDERX_88XX 1371 bool "Support ThunderX 88xx" 1372 select ARM64 1373 select OF_CONTROL 1374 select PL01X_SERIAL 1375 select SYS_CACHE_SHIFT_7 1376 1377config ARCH_ASPEED 1378 bool "Support Aspeed SoCs" 1379 select DM 1380 select OF_CONTROL 1381 imply CMD_DM 1382 1383endchoice 1384 1385config TI_SECURE_DEVICE 1386 bool "HS Device Type Support" 1387 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1388 help 1389 If a high secure (HS) device type is being used, this config 1390 must be set. This option impacts various aspects of the 1391 build system (to create signed boot images that can be 1392 authenticated) and the code. See the doc/README.ti-secure 1393 file for further details. 1394 1395source "arch/arm/mach-aspeed/Kconfig" 1396 1397source "arch/arm/mach-at91/Kconfig" 1398 1399source "arch/arm/mach-bcm283x/Kconfig" 1400 1401source "arch/arm/mach-bcmstb/Kconfig" 1402 1403source "arch/arm/mach-davinci/Kconfig" 1404 1405source "arch/arm/mach-exynos/Kconfig" 1406 1407source "arch/arm/mach-highbank/Kconfig" 1408 1409source "arch/arm/mach-integrator/Kconfig" 1410 1411source "arch/arm/mach-k3/Kconfig" 1412 1413source "arch/arm/mach-keystone/Kconfig" 1414 1415source "arch/arm/mach-kirkwood/Kconfig" 1416 1417source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1418 1419source "arch/arm/mach-mvebu/Kconfig" 1420 1421source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1422 1423source "arch/arm/mach-imx/mx2/Kconfig" 1424 1425source "arch/arm/mach-imx/mx3/Kconfig" 1426 1427source "arch/arm/mach-imx/mx5/Kconfig" 1428 1429source "arch/arm/mach-imx/mx6/Kconfig" 1430 1431source "arch/arm/mach-imx/mx7/Kconfig" 1432 1433source "arch/arm/mach-imx/mx7ulp/Kconfig" 1434 1435source "arch/arm/mach-imx/imx8/Kconfig" 1436 1437source "arch/arm/mach-imx/mx8m/Kconfig" 1438 1439source "arch/arm/mach-imx/mxs/Kconfig" 1440 1441source "arch/arm/mach-omap2/Kconfig" 1442 1443source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1444 1445source "arch/arm/mach-orion5x/Kconfig" 1446 1447source "arch/arm/mach-owl/Kconfig" 1448 1449source "arch/arm/mach-rmobile/Kconfig" 1450 1451source "arch/arm/mach-meson/Kconfig" 1452 1453source "arch/arm/mach-qemu/Kconfig" 1454 1455source "arch/arm/mach-rockchip/Kconfig" 1456 1457source "arch/arm/mach-s5pc1xx/Kconfig" 1458 1459source "arch/arm/mach-snapdragon/Kconfig" 1460 1461source "arch/arm/mach-socfpga/Kconfig" 1462 1463source "arch/arm/mach-sti/Kconfig" 1464 1465source "arch/arm/mach-stm32/Kconfig" 1466 1467source "arch/arm/mach-stm32mp/Kconfig" 1468 1469source "arch/arm/mach-sunxi/Kconfig" 1470 1471source "arch/arm/mach-tegra/Kconfig" 1472 1473source "arch/arm/mach-uniphier/Kconfig" 1474 1475source "arch/arm/cpu/armv7/vf610/Kconfig" 1476 1477source "arch/arm/mach-zynq/Kconfig" 1478 1479source "arch/arm/mach-versal/Kconfig" 1480 1481source "arch/arm/mach-zynqmp-r5/Kconfig" 1482 1483source "arch/arm/cpu/armv7/Kconfig" 1484 1485source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1486 1487source "arch/arm/cpu/armv8/Kconfig" 1488 1489source "arch/arm/mach-imx/Kconfig" 1490 1491source "board/bosch/shc/Kconfig" 1492source "board/CarMediaLab/flea3/Kconfig" 1493source "board/Marvell/aspenite/Kconfig" 1494source "board/Marvell/gplugd/Kconfig" 1495source "board/armadeus/apf27/Kconfig" 1496source "board/armltd/vexpress/Kconfig" 1497source "board/armltd/vexpress64/Kconfig" 1498source "board/broadcom/bcm23550_w1d/Kconfig" 1499source "board/broadcom/bcm28155_ap/Kconfig" 1500source "board/broadcom/bcm968580xref/Kconfig" 1501source "board/broadcom/bcmcygnus/Kconfig" 1502source "board/broadcom/bcmnsp/Kconfig" 1503source "board/broadcom/bcmns2/Kconfig" 1504source "board/cavium/thunderx/Kconfig" 1505source "board/cirrus/edb93xx/Kconfig" 1506source "board/eets/pdu001/Kconfig" 1507source "board/emulation/qemu-arm/Kconfig" 1508source "board/freescale/ls2080a/Kconfig" 1509source "board/freescale/ls2080aqds/Kconfig" 1510source "board/freescale/ls2080ardb/Kconfig" 1511source "board/freescale/ls1088a/Kconfig" 1512source "board/freescale/ls1021aqds/Kconfig" 1513source "board/freescale/ls1043aqds/Kconfig" 1514source "board/freescale/ls1021atwr/Kconfig" 1515source "board/freescale/ls1021aiot/Kconfig" 1516source "board/freescale/ls1046aqds/Kconfig" 1517source "board/freescale/ls1043ardb/Kconfig" 1518source "board/freescale/ls1046ardb/Kconfig" 1519source "board/freescale/ls1012aqds/Kconfig" 1520source "board/freescale/ls1012ardb/Kconfig" 1521source "board/freescale/ls1012afrdm/Kconfig" 1522source "board/freescale/mx35pdk/Kconfig" 1523source "board/freescale/s32v234evb/Kconfig" 1524source "board/grinn/chiliboard/Kconfig" 1525source "board/gumstix/pepper/Kconfig" 1526source "board/h2200/Kconfig" 1527source "board/hisilicon/hikey/Kconfig" 1528source "board/hisilicon/poplar/Kconfig" 1529source "board/isee/igep003x/Kconfig" 1530source "board/phytec/pcm051/Kconfig" 1531source "board/silica/pengwyn/Kconfig" 1532source "board/spear/spear300/Kconfig" 1533source "board/spear/spear310/Kconfig" 1534source "board/spear/spear320/Kconfig" 1535source "board/spear/spear600/Kconfig" 1536source "board/spear/x600/Kconfig" 1537source "board/st/stv0991/Kconfig" 1538source "board/tcl/sl50/Kconfig" 1539source "board/ucRobotics/bubblegum_96/Kconfig" 1540source "board/birdland/bav335x/Kconfig" 1541source "board/toradex/colibri_pxa270/Kconfig" 1542source "board/vscom/baltos/Kconfig" 1543source "board/woodburn/Kconfig" 1544source "board/xilinx/Kconfig" 1545source "board/xilinx/zynq/Kconfig" 1546source "board/xilinx/zynqmp/Kconfig" 1547source "board/zipitz2/Kconfig" 1548 1549source "arch/arm/Kconfig.debug" 1550 1551endmenu 1552 1553config SPL_LDSCRIPT 1554 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1555 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1556 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1557 1558 1559