xref: /openbmc/u-boot/arch/arm/Kconfig (revision fa87abb6)
1menu "ARM architecture"
2	depends on ARM
3
4config SYS_ARCH
5	default "arm"
6
7config ARM64
8	bool
9	select PHYS_64BIT
10	select SYS_CACHE_SHIFT_6
11
12config DMA_ADDR_T_64BIT
13	bool
14	default y if ARM64
15
16config HAS_VBAR
17	bool
18
19config HAS_THUMB2
20	bool
21
22# Used for compatibility with asm files copied from the kernel
23config ARM_ASM_UNIFIED
24	bool
25	default y
26
27# Used for compatibility with asm files copied from the kernel
28config THUMB2_KERNEL
29	bool
30
31# If set, the workarounds for these ARM errata are applied early during U-Boot
32# startup. Note that in general these options force the workarounds to be
33# applied; no CPU-type/version detection exists, unlike the similar options in
34# the Linux kernel. Do not set these options unless they apply!  Also note that
35# the following can be machine specific errata. These do have ability to
36# provide rudimentary version and machine specific checks, but expect no
37# product checks:
38# CONFIG_ARM_ERRATA_430973
39# CONFIG_ARM_ERRATA_454179
40# CONFIG_ARM_ERRATA_621766
41# CONFIG_ARM_ERRATA_798870
42# CONFIG_ARM_ERRATA_801819
43config ARM_ERRATA_430973
44	bool
45
46config ARM_ERRATA_454179
47	bool
48
49config ARM_ERRATA_621766
50	bool
51
52config ARM_ERRATA_716044
53	bool
54
55config ARM_ERRATA_725233
56	bool
57
58config ARM_ERRATA_742230
59	bool
60
61config ARM_ERRATA_743622
62	bool
63
64config ARM_ERRATA_751472
65	bool
66
67config ARM_ERRATA_761320
68	bool
69
70config ARM_ERRATA_773022
71	bool
72
73config ARM_ERRATA_774769
74	bool
75
76config ARM_ERRATA_794072
77	bool
78
79config ARM_ERRATA_798870
80	bool
81
82config ARM_ERRATA_801819
83	bool
84
85config ARM_ERRATA_826974
86	bool
87
88config ARM_ERRATA_828024
89	bool
90
91config ARM_ERRATA_829520
92	bool
93
94config ARM_ERRATA_833069
95	bool
96
97config ARM_ERRATA_833471
98	bool
99
100config ARM_ERRATA_852421
101	bool
102
103config ARM_ERRATA_852423
104	bool
105
106config CPU_ARM720T
107	bool
108	select SYS_CACHE_SHIFT_5
109
110config CPU_ARM920T
111	bool
112	select SYS_CACHE_SHIFT_5
113
114config CPU_ARM926EJS
115	bool
116	select SYS_CACHE_SHIFT_5
117
118config CPU_ARM946ES
119	bool
120	select SYS_CACHE_SHIFT_5
121
122config CPU_ARM1136
123	bool
124	select SYS_CACHE_SHIFT_5
125
126config CPU_ARM1176
127	bool
128	select HAS_VBAR
129	select SYS_CACHE_SHIFT_5
130
131config CPU_V7
132	bool
133	select HAS_VBAR
134	select HAS_THUMB2
135	select SYS_CACHE_SHIFT_6
136
137config CPU_V7M
138	bool
139	select HAS_THUMB2
140	select THUMB2_KERNEL
141	select SYS_CACHE_SHIFT_5
142
143config CPU_PXA
144	bool
145	select SYS_CACHE_SHIFT_5
146
147config CPU_SA1100
148	bool
149	select SYS_CACHE_SHIFT_5
150
151config SYS_CPU
152	default "arm720t" if CPU_ARM720T
153	default "arm920t" if CPU_ARM920T
154	default "arm926ejs" if CPU_ARM926EJS
155	default "arm946es" if CPU_ARM946ES
156	default "arm1136" if CPU_ARM1136
157	default "arm1176" if CPU_ARM1176
158	default "armv7" if CPU_V7
159	default "armv7m" if CPU_V7M
160	default "pxa" if CPU_PXA
161	default "sa1100" if CPU_SA1100
162	default "armv8" if ARM64
163
164config SYS_ARM_ARCH
165	int
166	default 4 if CPU_ARM720T
167	default 4 if CPU_ARM920T
168	default 5 if CPU_ARM926EJS
169	default 5 if CPU_ARM946ES
170	default 6 if CPU_ARM1136
171	default 6 if CPU_ARM1176
172	default 7 if CPU_V7
173	default 7 if CPU_V7M
174	default 5 if CPU_PXA
175	default 4 if CPU_SA1100
176	default 8 if ARM64
177
178config SYS_CACHE_SHIFT_5
179	bool
180
181config SYS_CACHE_SHIFT_6
182	bool
183
184config SYS_CACHE_SHIFT_7
185	bool
186
187config SYS_CACHELINE_SIZE
188	int
189	default 128 if SYS_CACHE_SHIFT_7
190	default 64 if SYS_CACHE_SHIFT_6
191	default 32 if SYS_CACHE_SHIFT_5
192
193config ARM_SMCCC
194	bool "Support for ARM SMC Calling Convention (SMCCC)"
195	depends on CPU_V7 || ARM64
196	select ARM_PSCI_FW
197	help
198	  Say Y here if you want to enable ARM SMC Calling Convention.
199	  This should be enabled if U-Boot needs to communicate with system
200	  firmware (for example, PSCI) according to SMCCC.
201
202config SEMIHOSTING
203	bool "support boot from semihosting"
204	help
205	  In emulated environments, semihosting is a way for
206	  the hosted environment to call out to the emulator to
207	  retrieve files from the host machine.
208
209config SYS_THUMB_BUILD
210	bool "Build U-Boot using the Thumb instruction set"
211	depends on !ARM64
212	help
213	   Use this flag to build U-Boot using the Thumb instruction set for
214	   ARM architectures. Thumb instruction set provides better code
215	   density. For ARM architectures that support Thumb2 this flag will
216	   result in Thumb2 code generated by GCC.
217
218config SPL_SYS_THUMB_BUILD
219	bool "Build SPL using the Thumb instruction set"
220	default y if SYS_THUMB_BUILD
221	depends on !ARM64
222	help
223	   Use this flag to build SPL using the Thumb instruction set for
224	   ARM architectures. Thumb instruction set provides better code
225	   density. For ARM architectures that support Thumb2 this flag will
226	   result in Thumb2 code generated by GCC.
227
228config SYS_L2CACHE_OFF
229	bool "L2cache off"
230	help
231	  If SoC does not support L2CACHE or one do not want to enable
232	  L2CACHE, choose this option.
233
234config ENABLE_ARM_SOC_BOOT0_HOOK
235	bool "prepare BOOT0 header"
236	help
237	  If the SoC's BOOT0 requires a header area filled with (magic)
238	  values, then choose this option, and create a define called
239	  ARM_SOC_BOOT0_HOOK which contains the required assembler
240	  preprocessor code.
241
242config ARM_CORTEX_CPU_IS_UP
243	bool
244	default n
245
246config USE_ARCH_MEMCPY
247	bool "Use an assembly optimized implementation of memcpy"
248	default y
249	depends on !ARM64
250	help
251	  Enable the generation of an optimized version of memcpy.
252	  Such implementation may be faster under some conditions
253	  but may increase the binary size.
254
255config SPL_USE_ARCH_MEMCPY
256	bool "Use an assembly optimized implementation of memcpy for SPL"
257	default y if USE_ARCH_MEMCPY
258	depends on !ARM64
259	help
260	  Enable the generation of an optimized version of memcpy.
261	  Such implementation may be faster under some conditions
262	  but may increase the binary size.
263
264config USE_ARCH_MEMSET
265	bool "Use an assembly optimized implementation of memset"
266	default y
267	depends on !ARM64
268	help
269	  Enable the generation of an optimized version of memset.
270	  Such implementation may be faster under some conditions
271	  but may increase the binary size.
272
273config SPL_USE_ARCH_MEMSET
274	bool "Use an assembly optimized implementation of memset for SPL"
275	default y if USE_ARCH_MEMSET
276	depends on !ARM64
277	help
278	  Enable the generation of an optimized version of memset.
279	  Such implementation may be faster under some conditions
280	  but may increase the binary size.
281
282config ARM64_SUPPORT_AARCH32
283	bool "ARM64 system support AArch32 execution state"
284	default y if ARM64 && !TARGET_THUNDERX_88XX
285	help
286	  This ARM64 system supports AArch32 execution state.
287
288choice
289	prompt "Target select"
290	default TARGET_HIKEY
291
292config ARCH_AT91
293	bool "Atmel AT91"
294	select SPL_BOARD_INIT if SPL
295
296config TARGET_EDB93XX
297	bool "Support edb93xx"
298	select CPU_ARM920T
299
300config TARGET_ASPENITE
301	bool "Support aspenite"
302	select CPU_ARM926EJS
303
304config TARGET_GPLUGD
305	bool "Support gplugd"
306	select CPU_ARM926EJS
307
308config ARCH_DAVINCI
309	bool "TI DaVinci"
310	select CPU_ARM926EJS
311	help
312	  Support for TI's DaVinci platform.
313
314config KIRKWOOD
315	bool "Marvell Kirkwood"
316	select CPU_ARM926EJS
317	select BOARD_EARLY_INIT_F
318	select ARCH_MISC_INIT
319
320config ARCH_MVEBU
321	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
322	select OF_CONTROL
323	select OF_SEPARATE
324	select DM
325	select DM_ETH
326	select DM_SERIAL
327	select DM_SPI
328	select DM_SPI_FLASH
329
330config TARGET_DEVKIT3250
331	bool "Support devkit3250"
332	select CPU_ARM926EJS
333	select SUPPORT_SPL
334
335config TARGET_WORK_92105
336	bool "Support work_92105"
337	select CPU_ARM926EJS
338	select SUPPORT_SPL
339
340config TARGET_MX25PDK
341	bool "Support mx25pdk"
342	select BOARD_LATE_INIT
343	select CPU_ARM926EJS
344	select BOARD_EARLY_INIT_F
345
346config TARGET_ZMX25
347	bool "Support zmx25"
348	select BOARD_LATE_INIT
349	select CPU_ARM926EJS
350
351config TARGET_APF27
352	bool "Support apf27"
353	select CPU_ARM926EJS
354	select SUPPORT_SPL
355
356config TARGET_APX4DEVKIT
357	bool "Support apx4devkit"
358	select CPU_ARM926EJS
359	select SUPPORT_SPL
360
361config TARGET_XFI3
362	bool "Support xfi3"
363	select CPU_ARM926EJS
364	select SUPPORT_SPL
365
366config TARGET_M28EVK
367	bool "Support m28evk"
368	select CPU_ARM926EJS
369	select SUPPORT_SPL
370
371config TARGET_MX23EVK
372	bool "Support mx23evk"
373	select CPU_ARM926EJS
374	select SUPPORT_SPL
375	select BOARD_EARLY_INIT_F
376
377config TARGET_MX28EVK
378	bool "Support mx28evk"
379	select CPU_ARM926EJS
380	select SUPPORT_SPL
381	select BOARD_EARLY_INIT_F
382
383config TARGET_MX23_OLINUXINO
384	bool "Support mx23_olinuxino"
385	select CPU_ARM926EJS
386	select SUPPORT_SPL
387	select BOARD_EARLY_INIT_F
388
389config TARGET_BG0900
390	bool "Support bg0900"
391	select CPU_ARM926EJS
392	select SUPPORT_SPL
393
394config TARGET_SANSA_FUZE_PLUS
395	bool "Support sansa_fuze_plus"
396	select CPU_ARM926EJS
397	select SUPPORT_SPL
398
399config TARGET_SC_SPS_1
400	bool "Support sc_sps_1"
401	select CPU_ARM926EJS
402	select SUPPORT_SPL
403
404config ORION5X
405	bool "Marvell Orion"
406	select CPU_ARM926EJS
407
408config TARGET_SPEAR300
409	bool "Support spear300"
410	select CPU_ARM926EJS
411	select BOARD_EARLY_INIT_F
412
413config TARGET_SPEAR310
414	bool "Support spear310"
415	select CPU_ARM926EJS
416	select BOARD_EARLY_INIT_F
417
418config TARGET_SPEAR320
419	bool "Support spear320"
420	select CPU_ARM926EJS
421	select BOARD_EARLY_INIT_F
422
423config TARGET_SPEAR600
424	bool "Support spear600"
425	select CPU_ARM926EJS
426	select BOARD_EARLY_INIT_F
427
428config TARGET_STV0991
429	bool "Support stv0991"
430	select CPU_V7
431	select DM
432	select DM_SERIAL
433	select DM_SPI
434	select DM_SPI_FLASH
435	select SPI_FLASH
436
437config TARGET_X600
438	bool "Support x600"
439	select BOARD_LATE_INIT
440	select CPU_ARM926EJS
441	select SUPPORT_SPL
442
443config TARGET_IMX31_PHYCORE
444	bool "Support imx31_phycore_eet"
445	select CPU_ARM1136
446	select BOARD_EARLY_INIT_F
447
448config TARGET_IMX31_PHYCORE_EET
449	bool "Support imx31_phycore_eet"
450	select BOARD_LATE_INIT
451	select CPU_ARM1136
452	select BOARD_EARLY_INIT_F
453
454config TARGET_MX31ADS
455	bool "Support mx31ads"
456	select CPU_ARM1136
457	select BOARD_EARLY_INIT_F
458
459config TARGET_MX31PDK
460	bool "Support mx31pdk"
461	select BOARD_LATE_INIT
462	select CPU_ARM1136
463	select SUPPORT_SPL
464	select BOARD_EARLY_INIT_F
465
466config TARGET_WOODBURN
467	bool "Support woodburn"
468	select CPU_ARM1136
469
470config TARGET_WOODBURN_SD
471	bool "Support woodburn_sd"
472	select CPU_ARM1136
473	select SUPPORT_SPL
474
475config TARGET_FLEA3
476	bool "Support flea3"
477	select CPU_ARM1136
478
479config TARGET_MX35PDK
480	bool "Support mx35pdk"
481	select BOARD_LATE_INIT
482	select CPU_ARM1136
483
484config ARCH_BCM283X
485	bool "Broadcom BCM283X family"
486	select DM
487	select DM_SERIAL
488	select DM_GPIO
489	select OF_CONTROL
490	imply FAT_WRITE
491	imply ENV_IS_IN_FAT
492
493config TARGET_VEXPRESS_CA15_TC2
494	bool "Support vexpress_ca15_tc2"
495	select CPU_V7
496	select CPU_V7_HAS_NONSEC
497	select CPU_V7_HAS_VIRT
498
499config TARGET_VEXPRESS_CA5X2
500	bool "Support vexpress_ca5x2"
501	select CPU_V7
502
503config TARGET_VEXPRESS_CA9X4
504	bool "Support vexpress_ca9x4"
505	select CPU_V7
506
507config TARGET_BCM23550_W1D
508	bool "Support bcm23550_w1d"
509	select CPU_V7
510	imply CRC32_VERIFY
511	imply FAT_WRITE
512
513config TARGET_BCM28155_AP
514	bool "Support bcm28155_ap"
515	select CPU_V7
516	imply CRC32_VERIFY
517	imply FAT_WRITE
518
519config TARGET_BCMCYGNUS
520	bool "Support bcmcygnus"
521	select CPU_V7
522	imply CRC32_VERIFY
523	imply CMD_HASH
524	imply FAT_WRITE
525	imply HASH_VERIFY
526
527config TARGET_BCMNSP
528	bool "Support bcmnsp"
529	select CPU_V7
530
531config TARGET_BCMNS2
532	bool "Support Broadcom Northstar2"
533	select ARM64
534	help
535	  Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
536	  ARMv8 Cortex-A57 processors targeting a broad range of networking
537	  applications
538
539config ARCH_EXYNOS
540	bool "Samsung EXYNOS"
541	select DM
542	select DM_I2C
543	select DM_SPI_FLASH
544	select DM_SERIAL
545	select DM_SPI
546	select DM_GPIO
547	select DM_KEYBOARD
548	imply FAT_WRITE
549
550config ARCH_S5PC1XX
551	bool "Samsung S5PC1XX"
552	select CPU_V7
553	select DM
554	select DM_SERIAL
555	select DM_GPIO
556	select DM_I2C
557
558config ARCH_HIGHBANK
559	bool "Calxeda Highbank"
560	select CPU_V7
561
562config ARCH_INTEGRATOR
563	bool "ARM Ltd. Integrator family"
564	select DM
565	select DM_SERIAL
566
567config ARCH_KEYSTONE
568	bool "TI Keystone"
569	select CPU_V7
570	select SUPPORT_SPL
571	select SYS_THUMB_BUILD
572	select CMD_POWEROFF
573	imply CMD_MTDPARTS
574	imply FIT
575
576config ARCH_OMAP2PLUS
577	bool "TI OMAP2+"
578	select CPU_V7
579	select SPL_BOARD_INIT if SPL
580	select SUPPORT_SPL
581	imply FIT
582
583config ARCH_MESON
584	bool "Amlogic Meson"
585	help
586	  Support for the Meson SoC family developed by Amlogic Inc.,
587	  targeted at media players and tablet computers. We currently
588	  support the S905 (GXBaby) 64-bit SoC.
589
590config ARCH_MX7ULP
591        bool "NXP MX7ULP"
592        select CPU_V7
593	select ROM_UNIFIED_SECTIONS
594
595config ARCH_MX7
596	bool "Freescale MX7"
597	select CPU_V7
598	select SYS_FSL_HAS_SEC if SECURE_BOOT
599	select SYS_FSL_SEC_COMPAT_4
600	select SYS_FSL_SEC_LE
601	select BOARD_EARLY_INIT_F
602	select ARCH_MISC_INIT
603
604config ARCH_MX6
605	bool "Freescale MX6"
606	select CPU_V7
607	select SYS_FSL_HAS_SEC if SECURE_BOOT
608	select SYS_FSL_SEC_COMPAT_4
609	select SYS_FSL_SEC_LE
610	select SYS_THUMB_BUILD if SPL
611
612config ARCH_MX5
613	bool "Freescale MX5"
614	select CPU_V7
615	select BOARD_EARLY_INIT_F
616
617config ARCH_RMOBILE
618	bool "Renesas ARM SoCs"
619	select DM
620	select DM_SERIAL
621	select BOARD_EARLY_INIT_F
622	imply FAT_WRITE
623	imply SYS_THUMB_BUILD
624
625config TARGET_S32V234EVB
626	bool "Support s32v234evb"
627	select ARM64
628	select SYS_FSL_ERRATUM_ESDHC111
629
630config ARCH_SNAPDRAGON
631	bool "Qualcomm Snapdragon SoCs"
632	select ARM64
633	select DM
634	select DM_GPIO
635	select DM_SERIAL
636	select SPMI
637	select OF_CONTROL
638	select OF_SEPARATE
639
640config ARCH_SOCFPGA
641	bool "Altera SOCFPGA family"
642	select CPU_V7
643	select SUPPORT_SPL
644	select OF_CONTROL
645	select SPL_OF_CONTROL
646	select DM
647	select DM_SPI_FLASH
648	select DM_SPI
649	select ENABLE_ARM_SOC_BOOT0_HOOK
650	select ARCH_EARLY_INIT_R
651	select ARCH_MISC_INIT
652	select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
653	select SYS_THUMB_BUILD
654	imply CMD_MTDPARTS
655	imply CRC32_VERIFY
656	imply FAT_WRITE
657
658config ARCH_SUNXI
659	bool "Support sunxi (Allwinner) SoCs"
660	select CMD_GPIO
661	select CMD_MMC if MMC
662	select CMD_USB if DISTRO_DEFAULTS
663	select DM
664	select DM_ETH
665	select DM_GPIO
666	select DM_KEYBOARD
667	select DM_SERIAL
668	select DM_USB if DISTRO_DEFAULTS
669	select OF_BOARD_SETUP
670	select OF_CONTROL
671	select OF_SEPARATE
672	select SPL_STACK_R if SPL
673	select SPL_SYS_MALLOC_SIMPLE if SPL
674	select SYS_NS16550
675	select SPL_SYS_THUMB_BUILD if !ARM64
676	select USB if DISTRO_DEFAULTS
677	select USB_STORAGE if DISTRO_DEFAULTS
678	select USB_KEYBOARD if DISTRO_DEFAULTS
679	select USE_TINY_PRINTF
680	imply FAT_WRITE
681	imply PRE_CONSOLE_BUFFER
682	imply SPL_GPIO_SUPPORT
683	imply SPL_LIBCOMMON_SUPPORT
684	imply SPL_LIBDISK_SUPPORT
685	imply SPL_LIBGENERIC_SUPPORT
686	imply SPL_MMC_SUPPORT if MMC
687	imply SPL_POWER_SUPPORT
688	imply SPL_SERIAL_SUPPORT
689
690config TARGET_TS4600
691	bool "Support TS4600"
692	select CPU_ARM926EJS
693	select SUPPORT_SPL
694
695config ARCH_VF610
696	bool "Freescale Vybrid"
697	select CPU_V7
698	select SYS_FSL_ERRATUM_ESDHC111
699	imply CMD_MTDPARTS
700
701config ARCH_ZYNQ
702	bool "Xilinx Zynq Platform"
703	select BOARD_LATE_INIT
704	select CPU_V7
705	select SUPPORT_SPL
706	select OF_CONTROL
707	select SPL_BOARD_INIT if SPL
708	select SPL_OF_CONTROL if SPL
709	select DM
710	select DM_ETH
711	select DM_GPIO
712	select SPL_DM if SPL
713	select DM_MMC
714	select DM_MMC_OPS
715	select DM_SPI
716	select DM_SERIAL
717	select DM_SPI_FLASH
718	select SPL_SEPARATE_BSS if SPL
719	select DM_USB if USB
720	select BLK
721	select CLK
722	select SPL_CLK
723	select CLK_ZYNQ
724	imply CMD_CLK
725	imply FAT_WRITE
726
727config ARCH_ZYNQMP
728	bool "Support Xilinx ZynqMP Platform"
729	select ARM64
730	select BOARD_LATE_INIT
731	select DM
732	select OF_CONTROL
733	select DM_SERIAL
734	select SUPPORT_SPL
735	select CLK
736	select SPL_BOARD_INIT if SPL
737	select SPL_CLK
738	select DM_USB if USB
739	imply FAT_WRITE
740
741config TEGRA
742	bool "NVIDIA Tegra"
743	imply FAT_WRITE
744
745config TARGET_VEXPRESS64_AEMV8A
746	bool "Support vexpress_aemv8a"
747	select ARM64
748
749config TARGET_VEXPRESS64_BASE_FVP
750	bool "Support Versatile Express ARMv8a FVP BASE model"
751	select ARM64
752	select SEMIHOSTING
753
754config TARGET_VEXPRESS64_BASE_FVP_DRAM
755	bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
756	select ARM64
757	help
758	  This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
759	  the default config to allow the user to load the images directly into
760	  DRAM using model parameters rather than by using semi-hosting to load
761	  the files from the host filesystem.
762
763config TARGET_VEXPRESS64_JUNO
764	bool "Support Versatile Express Juno Development Platform"
765	select ARM64
766
767config TARGET_LS2080A_EMU
768	bool "Support ls2080a_emu"
769	select ARCH_LS2080A
770	select ARM64
771	select ARMV8_MULTIENTRY
772	select ARCH_MISC_INIT
773	help
774	  Support for Freescale LS2080A_EMU platform
775	  The LS2080A Development System (EMULATOR) is a pre silicon
776	  development platform that supports the QorIQ LS2080A
777	  Layerscape Architecture processor.
778
779config TARGET_LS2080A_SIMU
780	bool "Support ls2080a_simu"
781	select ARCH_LS2080A
782	select ARM64
783	select ARMV8_MULTIENTRY
784	select ARCH_MISC_INIT
785	help
786	  Support for Freescale LS2080A_SIMU platform
787	  The LS2080A Development System (QDS) is a pre silicon
788	  development platform that supports the QorIQ LS2080A
789	  Layerscape Architecture processor.
790
791config TARGET_LS2080AQDS
792	bool "Support ls2080aqds"
793	select ARCH_LS2080A
794	select ARM64
795	select ARMV8_MULTIENTRY
796	select BOARD_LATE_INIT
797	select SUPPORT_SPL
798	select ARCH_MISC_INIT
799	imply SCSI
800	help
801	  Support for Freescale LS2080AQDS platform
802	  The LS2080A Development System (QDS) is a high-performance
803	  development platform that supports the QorIQ LS2080A
804	  Layerscape Architecture processor.
805
806config TARGET_LS2080ARDB
807	bool "Support ls2080ardb"
808	select ARCH_LS2080A
809	select ARM64
810	select ARMV8_MULTIENTRY
811	select BOARD_LATE_INIT
812	select SUPPORT_SPL
813	select ARCH_MISC_INIT
814	imply SCSI
815	help
816	  Support for Freescale LS2080ARDB platform.
817	  The LS2080A Reference design board (RDB) is a high-performance
818	  development platform that supports the QorIQ LS2080A
819	  Layerscape Architecture processor.
820
821config TARGET_LS2081ARDB
822	bool "Support ls2081ardb"
823	select ARCH_LS2080A
824	select ARM64
825	select ARMV8_MULTIENTRY
826	select BOARD_LATE_INIT
827	select SUPPORT_SPL
828	select ARCH_MISC_INIT
829	help
830	  Support for Freescale LS2081ARDB platform.
831	  The LS2081A Reference design board (RDB) is a high-performance
832	  development platform that supports the QorIQ LS2081A/LS2041A
833	  Layerscape Architecture processor.
834
835config TARGET_HIKEY
836	bool "Support HiKey 96boards Consumer Edition Platform"
837	select ARM64
838	select DM
839	select DM_GPIO
840	select DM_SERIAL
841	select OF_CONTROL
842	  help
843	  Support for HiKey 96boards platform. It features a HI6220
844	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
845
846config TARGET_POPLAR
847	bool "Support Poplar 96boards Enterprise Edition Platform"
848	select ARM64
849	select DM
850	select OF_CONTROL
851	select DM_SERIAL
852	select DM_USB
853	  help
854	  Support for Poplar 96boards EE platform. It features a HI3798cv200
855	  SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
856	  making it capable of running any commercial set-top solution based on
857	  Linux or Android.
858
859config TARGET_LS1012AQDS
860	bool "Support ls1012aqds"
861	select ARCH_LS1012A
862	select ARM64
863	select BOARD_LATE_INIT
864	help
865	  Support for Freescale LS1012AQDS platform.
866	  The LS1012A Development System (QDS) is a high-performance
867	  development platform that supports the QorIQ LS1012A
868	  Layerscape Architecture processor.
869
870config TARGET_LS1012ARDB
871	bool "Support ls1012ardb"
872	select ARCH_LS1012A
873	select ARM64
874	select BOARD_LATE_INIT
875	imply SCSI
876	help
877	  Support for Freescale LS1012ARDB platform.
878	  The LS1012A Reference design board (RDB) is a high-performance
879	  development platform that supports the QorIQ LS1012A
880	  Layerscape Architecture processor.
881
882config TARGET_LS1012AFRDM
883	bool "Support ls1012afrdm"
884	select ARCH_LS1012A
885	select ARM64
886	help
887	  Support for Freescale LS1012AFRDM platform.
888	  The LS1012A Freedom  board (FRDM) is a high-performance
889	  development platform that supports the QorIQ LS1012A
890	  Layerscape Architecture processor.
891
892config TARGET_LS1021AQDS
893	bool "Support ls1021aqds"
894	select BOARD_LATE_INIT
895	select CPU_V7
896	select CPU_V7_HAS_NONSEC
897	select CPU_V7_HAS_VIRT
898	select SUPPORT_SPL
899	select ARCH_LS1021A
900	select ARCH_SUPPORT_PSCI
901	select LS1_DEEP_SLEEP
902	select SYS_FSL_DDR
903	select BOARD_EARLY_INIT_F
904	imply SCSI
905
906config TARGET_LS1021ATWR
907	bool "Support ls1021atwr"
908	select BOARD_LATE_INIT
909	select CPU_V7
910	select CPU_V7_HAS_NONSEC
911	select CPU_V7_HAS_VIRT
912	select SUPPORT_SPL
913	select ARCH_LS1021A
914	select ARCH_SUPPORT_PSCI
915	select LS1_DEEP_SLEEP
916	select BOARD_EARLY_INIT_F
917	imply SCSI
918
919config TARGET_LS1021AIOT
920	bool "Support ls1021aiot"
921	select BOARD_LATE_INIT
922	select CPU_V7
923	select CPU_V7_HAS_NONSEC
924	select CPU_V7_HAS_VIRT
925	select SUPPORT_SPL
926	select ARCH_LS1021A
927	select ARCH_SUPPORT_PSCI
928	imply SCSI
929	help
930	  Support for Freescale LS1021AIOT platform.
931	  The LS1021A Freescale board (IOT) is a high-performance
932	  development platform that supports the QorIQ LS1021A
933	  Layerscape Architecture processor.
934
935config TARGET_LS1043AQDS
936	bool "Support ls1043aqds"
937	select ARCH_LS1043A
938	select ARM64
939	select ARMV8_MULTIENTRY
940	select BOARD_LATE_INIT
941	select SUPPORT_SPL
942	select BOARD_EARLY_INIT_F
943	imply SCSI
944	help
945	  Support for Freescale LS1043AQDS platform.
946
947config TARGET_LS1043ARDB
948	bool "Support ls1043ardb"
949	select ARCH_LS1043A
950	select ARM64
951	select ARMV8_MULTIENTRY
952	select BOARD_LATE_INIT
953	select SUPPORT_SPL
954	select BOARD_EARLY_INIT_F
955	imply SCSI
956	help
957	  Support for Freescale LS1043ARDB platform.
958
959config TARGET_LS1046AQDS
960	bool "Support ls1046aqds"
961	select ARCH_LS1046A
962	select ARM64
963	select ARMV8_MULTIENTRY
964	select BOARD_LATE_INIT
965	select SUPPORT_SPL
966	select DM_SPI_FLASH if DM_SPI
967	select BOARD_EARLY_INIT_F
968	imply SCSI
969	help
970	  Support for Freescale LS1046AQDS platform.
971	  The LS1046A Development System (QDS) is a high-performance
972	  development platform that supports the QorIQ LS1046A
973	  Layerscape Architecture processor.
974
975config TARGET_LS1046ARDB
976	bool "Support ls1046ardb"
977	select ARCH_LS1046A
978	select ARM64
979	select ARMV8_MULTIENTRY
980	select BOARD_LATE_INIT
981	select SUPPORT_SPL
982	select DM_SPI_FLASH if DM_SPI
983	select POWER_MC34VR500
984	select BOARD_EARLY_INIT_F
985	imply SCSI
986	help
987	  Support for Freescale LS1046ARDB platform.
988	  The LS1046A Reference Design Board (RDB) is a high-performance
989	  development platform that supports the QorIQ LS1046A
990	  Layerscape Architecture processor.
991
992config TARGET_H2200
993	bool "Support h2200"
994	select CPU_PXA
995
996config TARGET_ZIPITZ2
997	bool "Support zipitz2"
998	select CPU_PXA
999
1000config TARGET_COLIBRI_PXA270
1001	bool "Support colibri_pxa270"
1002	select CPU_PXA
1003
1004config ARCH_UNIPHIER
1005	bool "Socionext UniPhier SoCs"
1006	select BOARD_LATE_INIT
1007	select CLK_UNIPHIER
1008	select DM
1009	select DM_GPIO
1010	select DM_I2C
1011	select DM_MMC
1012	select DM_RESET
1013	select DM_SERIAL
1014	select DM_USB
1015	select OF_CONTROL
1016	select OF_LIBFDT
1017	select PINCTRL
1018	select SPL_BOARD_INIT if SPL
1019	select SPL_DM if SPL
1020	select SPL_LIBCOMMON_SUPPORT if SPL
1021	select SPL_LIBGENERIC_SUPPORT if SPL
1022	select SPL_OF_CONTROL if SPL
1023	select SPL_PINCTRL if SPL
1024	select SUPPORT_SPL
1025	imply FAT_WRITE
1026	imply ENV_IS_IN_MMC
1027	help
1028	  Support for UniPhier SoC family developed by Socionext Inc.
1029	  (formerly, System LSI Business Division of Panasonic Corporation)
1030
1031config STM32
1032	bool "Support STM32"
1033	select CPU_V7M
1034	select DM
1035	select DM_SERIAL
1036	select SYS_THUMB_BUILD
1037
1038config ARCH_STI
1039	bool "Support STMicrolectronics SoCs"
1040	select CPU_V7
1041	select DM
1042	select DM_SERIAL
1043	select BLK
1044	select DM_MMC
1045	select DM_RESET
1046	help
1047	  Support for STMicroelectronics STiH407/10 SoC family.
1048	  This SoC is used on Linaro 96Board STiH410-B2260
1049
1050config ARCH_ROCKCHIP
1051	bool "Support Rockchip SoCs"
1052	select OF_CONTROL
1053	select BLK
1054	select DM
1055	select SPL_DM if SPL
1056	select SYS_MALLOC_F
1057	select SYS_THUMB_BUILD if !ARM64
1058	select SPL_SYS_MALLOC_SIMPLE if SPL
1059	select DM_GPIO
1060	select DM_I2C
1061	select DM_MMC
1062	select DM_MMC_OPS
1063	select DM_SERIAL
1064	select DM_SPI
1065	select DM_SPI_FLASH
1066	select DM_USB if USB
1067	select DM_PWM
1068	select DM_REGULATOR
1069	imply FAT_WRITE
1070
1071config TARGET_THUNDERX_88XX
1072	bool "Support ThunderX 88xx"
1073	select ARM64
1074	select OF_CONTROL
1075	select SYS_CACHE_SHIFT_7
1076
1077config ARCH_ASPEED
1078	bool "Support Aspeed SoCs"
1079	select OF_CONTROL
1080	select DM
1081
1082endchoice
1083
1084source "arch/arm/mach-aspeed/Kconfig"
1085
1086source "arch/arm/mach-at91/Kconfig"
1087
1088source "arch/arm/mach-bcm283x/Kconfig"
1089
1090source "arch/arm/mach-davinci/Kconfig"
1091
1092source "arch/arm/mach-exynos/Kconfig"
1093
1094source "arch/arm/mach-highbank/Kconfig"
1095
1096source "arch/arm/mach-integrator/Kconfig"
1097
1098source "arch/arm/mach-keystone/Kconfig"
1099
1100source "arch/arm/mach-kirkwood/Kconfig"
1101
1102source "arch/arm/mach-mvebu/Kconfig"
1103
1104source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1105
1106source "arch/arm/mach-imx/mx7ulp/Kconfig"
1107
1108source "arch/arm/mach-imx/mx7/Kconfig"
1109
1110source "arch/arm/mach-imx/mx6/Kconfig"
1111
1112source "arch/arm/mach-imx/mx5/Kconfig"
1113
1114source "arch/arm/mach-omap2/Kconfig"
1115
1116source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1117
1118source "arch/arm/mach-orion5x/Kconfig"
1119
1120source "arch/arm/mach-rmobile/Kconfig"
1121
1122source "arch/arm/mach-meson/Kconfig"
1123
1124source "arch/arm/mach-rockchip/Kconfig"
1125
1126source "arch/arm/mach-s5pc1xx/Kconfig"
1127
1128source "arch/arm/mach-snapdragon/Kconfig"
1129
1130source "arch/arm/mach-socfpga/Kconfig"
1131
1132source "arch/arm/mach-sti/Kconfig"
1133
1134source "arch/arm/mach-stm32/Kconfig"
1135
1136source "arch/arm/mach-sunxi/Kconfig"
1137
1138source "arch/arm/mach-tegra/Kconfig"
1139
1140source "arch/arm/mach-uniphier/Kconfig"
1141
1142source "arch/arm/cpu/armv7/vf610/Kconfig"
1143
1144source "arch/arm/mach-zynq/Kconfig"
1145
1146source "arch/arm/cpu/armv7/Kconfig"
1147
1148source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1149
1150source "arch/arm/cpu/armv8/Kconfig"
1151
1152source "arch/arm/mach-imx/Kconfig"
1153
1154source "board/aries/m28evk/Kconfig"
1155source "board/bosch/shc/Kconfig"
1156source "board/CarMediaLab/flea3/Kconfig"
1157source "board/Marvell/aspenite/Kconfig"
1158source "board/Marvell/gplugd/Kconfig"
1159source "board/armadeus/apf27/Kconfig"
1160source "board/armltd/vexpress/Kconfig"
1161source "board/armltd/vexpress64/Kconfig"
1162source "board/bluegiga/apx4devkit/Kconfig"
1163source "board/broadcom/bcm23550_w1d/Kconfig"
1164source "board/broadcom/bcm28155_ap/Kconfig"
1165source "board/broadcom/bcmcygnus/Kconfig"
1166source "board/broadcom/bcmnsp/Kconfig"
1167source "board/broadcom/bcmns2/Kconfig"
1168source "board/cavium/thunderx/Kconfig"
1169source "board/cirrus/edb93xx/Kconfig"
1170source "board/creative/xfi3/Kconfig"
1171source "board/freescale/ls2080a/Kconfig"
1172source "board/freescale/ls2080aqds/Kconfig"
1173source "board/freescale/ls2080ardb/Kconfig"
1174source "board/freescale/ls1021aqds/Kconfig"
1175source "board/freescale/ls1043aqds/Kconfig"
1176source "board/freescale/ls1021atwr/Kconfig"
1177source "board/freescale/ls1021aiot/Kconfig"
1178source "board/freescale/ls1046aqds/Kconfig"
1179source "board/freescale/ls1043ardb/Kconfig"
1180source "board/freescale/ls1046ardb/Kconfig"
1181source "board/freescale/ls1012aqds/Kconfig"
1182source "board/freescale/ls1012ardb/Kconfig"
1183source "board/freescale/ls1012afrdm/Kconfig"
1184source "board/freescale/mx23evk/Kconfig"
1185source "board/freescale/mx25pdk/Kconfig"
1186source "board/freescale/mx28evk/Kconfig"
1187source "board/freescale/mx31ads/Kconfig"
1188source "board/freescale/mx31pdk/Kconfig"
1189source "board/freescale/mx35pdk/Kconfig"
1190source "board/freescale/s32v234evb/Kconfig"
1191source "board/gdsys/a38x/Kconfig"
1192source "board/grinn/chiliboard/Kconfig"
1193source "board/gumstix/pepper/Kconfig"
1194source "board/h2200/Kconfig"
1195source "board/hisilicon/hikey/Kconfig"
1196source "board/hisilicon/poplar/Kconfig"
1197source "board/imx31_phycore/Kconfig"
1198source "board/isee/igep003x/Kconfig"
1199source "board/olimex/mx23_olinuxino/Kconfig"
1200source "board/phytec/pcm051/Kconfig"
1201source "board/ppcag/bg0900/Kconfig"
1202source "board/sandisk/sansa_fuze_plus/Kconfig"
1203source "board/schulercontrol/sc_sps_1/Kconfig"
1204source "board/silica/pengwyn/Kconfig"
1205source "board/spear/spear300/Kconfig"
1206source "board/spear/spear310/Kconfig"
1207source "board/spear/spear320/Kconfig"
1208source "board/spear/spear600/Kconfig"
1209source "board/spear/x600/Kconfig"
1210source "board/st/stv0991/Kconfig"
1211source "board/syteco/zmx25/Kconfig"
1212source "board/tcl/sl50/Kconfig"
1213source "board/birdland/bav335x/Kconfig"
1214source "board/timll/devkit3250/Kconfig"
1215source "board/toradex/colibri_pxa270/Kconfig"
1216source "board/technologic/ts4600/Kconfig"
1217source "board/vscom/baltos/Kconfig"
1218source "board/woodburn/Kconfig"
1219source "board/work-microwave/work_92105/Kconfig"
1220source "board/zipitz2/Kconfig"
1221
1222source "arch/arm/Kconfig.debug"
1223
1224endmenu
1225