1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_DEVKIT3250 447 bool "Support devkit3250" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_WORK_92105 452 bool "Support work_92105" 453 select CPU_ARM926EJS 454 select SUPPORT_SPL 455 456config TARGET_APF27 457 bool "Support apf27" 458 select CPU_ARM926EJS 459 select SUPPORT_SPL 460 461config ORION5X 462 bool "Marvell Orion" 463 select CPU_ARM926EJS 464 465config TARGET_SPEAR300 466 bool "Support spear300" 467 select BOARD_EARLY_INIT_F 468 select CPU_ARM926EJS 469 select PL011_SERIAL 470 imply CMD_SAVES 471 472config TARGET_SPEAR310 473 bool "Support spear310" 474 select BOARD_EARLY_INIT_F 475 select CPU_ARM926EJS 476 select PL011_SERIAL 477 imply CMD_SAVES 478 479config TARGET_SPEAR320 480 bool "Support spear320" 481 select BOARD_EARLY_INIT_F 482 select CPU_ARM926EJS 483 select PL011_SERIAL 484 imply CMD_SAVES 485 486config TARGET_SPEAR600 487 bool "Support spear600" 488 select BOARD_EARLY_INIT_F 489 select CPU_ARM926EJS 490 select PL011_SERIAL 491 imply CMD_SAVES 492 493config TARGET_STV0991 494 bool "Support stv0991" 495 select CPU_V7A 496 select DM 497 select DM_SERIAL 498 select DM_SPI 499 select DM_SPI_FLASH 500 select PL01X_SERIAL 501 select SPI 502 select SPI_FLASH 503 imply CMD_DM 504 505config TARGET_X600 506 bool "Support x600" 507 select BOARD_LATE_INIT 508 select CPU_ARM926EJS 509 select PL011_SERIAL 510 select SUPPORT_SPL 511 512config TARGET_WOODBURN 513 bool "Support woodburn" 514 select CPU_ARM1136 515 516config TARGET_WOODBURN_SD 517 bool "Support woodburn_sd" 518 select CPU_ARM1136 519 select SUPPORT_SPL 520 521config TARGET_FLEA3 522 bool "Support flea3" 523 select CPU_ARM1136 524 525config TARGET_MX35PDK 526 bool "Support mx35pdk" 527 select BOARD_LATE_INIT 528 select CPU_ARM1136 529 530config ARCH_BCM283X 531 bool "Broadcom BCM283X family" 532 select DM 533 select DM_GPIO 534 select DM_SERIAL 535 select OF_CONTROL 536 select PL01X_SERIAL 537 select SERIAL_SEARCH_ALL 538 imply CMD_DM 539 imply FAT_WRITE 540 541config TARGET_VEXPRESS_CA15_TC2 542 bool "Support vexpress_ca15_tc2" 543 select CPU_V7A 544 select CPU_V7_HAS_NONSEC 545 select CPU_V7_HAS_VIRT 546 select PL011_SERIAL 547 548config ARCH_BCMSTB 549 bool "Broadcom BCM7XXX family" 550 select CPU_V7A 551 select DM 552 select OF_CONTROL 553 select OF_PRIOR_STAGE 554 imply CMD_DM 555 help 556 This enables support for Broadcom ARM-based set-top box 557 chipsets, including the 7445 family of chips. 558 559config TARGET_VEXPRESS_CA5X2 560 bool "Support vexpress_ca5x2" 561 select CPU_V7A 562 select PL011_SERIAL 563 564config TARGET_VEXPRESS_CA9X4 565 bool "Support vexpress_ca9x4" 566 select CPU_V7A 567 select PL011_SERIAL 568 569config TARGET_BCM23550_W1D 570 bool "Support bcm23550_w1d" 571 select CPU_V7A 572 imply CRC32_VERIFY 573 imply FAT_WRITE 574 575config TARGET_BCM28155_AP 576 bool "Support bcm28155_ap" 577 select CPU_V7A 578 imply CRC32_VERIFY 579 imply FAT_WRITE 580 581config TARGET_BCMCYGNUS 582 bool "Support bcmcygnus" 583 select CPU_V7A 584 imply BCM_SF2_ETH 585 imply BCM_SF2_ETH_GMAC 586 imply CMD_HASH 587 imply CRC32_VERIFY 588 imply FAT_WRITE 589 imply HASH_VERIFY 590 imply NETDEVICES 591 592config TARGET_BCMNSP 593 bool "Support bcmnsp" 594 select CPU_V7A 595 596config TARGET_BCMNS2 597 bool "Support Broadcom Northstar2" 598 select ARM64 599 help 600 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 601 ARMv8 Cortex-A57 processors targeting a broad range of networking 602 applications 603 604config ARCH_EXYNOS 605 bool "Samsung EXYNOS" 606 select DM 607 select DM_GPIO 608 select DM_I2C 609 select DM_KEYBOARD 610 select DM_SERIAL 611 select DM_SPI 612 select DM_SPI_FLASH 613 select SPI 614 imply CMD_DM 615 imply FAT_WRITE 616 617config ARCH_S5PC1XX 618 bool "Samsung S5PC1XX" 619 select CPU_V7A 620 select DM 621 select DM_GPIO 622 select DM_I2C 623 select DM_SERIAL 624 imply CMD_DM 625 626config ARCH_HIGHBANK 627 bool "Calxeda Highbank" 628 select CPU_V7A 629 select PL011_SERIAL 630 631config ARCH_INTEGRATOR 632 bool "ARM Ltd. Integrator family" 633 select DM 634 select DM_SERIAL 635 select PL01X_SERIAL 636 imply CMD_DM 637 638config ARCH_KEYSTONE 639 bool "TI Keystone" 640 select CMD_POWEROFF 641 select CPU_V7A 642 select SUPPORT_SPL 643 select SYS_ARCH_TIMER 644 select SYS_THUMB_BUILD 645 imply CMD_MTDPARTS 646 imply CMD_SAVES 647 imply FIT 648 649config ARCH_K3 650 bool "Texas Instruments' K3 Architecture" 651 select SPL 652 select SUPPORT_SPL 653 select FIT 654 655config ARCH_OMAP2PLUS 656 bool "TI OMAP2+" 657 select CPU_V7A 658 select SPL_BOARD_INIT if SPL 659 select SPL_STACK_R if SPL 660 select SUPPORT_SPL 661 imply FIT 662 663config ARCH_MESON 664 bool "Amlogic Meson" 665 imply DISTRO_DEFAULTS 666 help 667 Support for the Meson SoC family developed by Amlogic Inc., 668 targeted at media players and tablet computers. We currently 669 support the S905 (GXBaby) 64-bit SoC. 670 671config ARCH_MX8M 672 bool "NXP i.MX8M platform" 673 select ARM64 674 select DM 675 select SUPPORT_SPL 676 imply CMD_DM 677 678config ARCH_MX23 679 bool "NXP i.MX23 family" 680 select CPU_ARM926EJS 681 select PL011_SERIAL 682 select SUPPORT_SPL 683 684config ARCH_MX25 685 bool "NXP MX25" 686 select CPU_ARM926EJS 687 imply MXC_GPIO 688 689config ARCH_MX28 690 bool "NXP i.MX28 family" 691 select CPU_ARM926EJS 692 select PL011_SERIAL 693 select SUPPORT_SPL 694 695config ARCH_MX31 696 bool "NXP i.MX31 family" 697 select CPU_ARM1136 698 699config ARCH_MX7ULP 700 bool "NXP MX7ULP" 701 select CPU_V7A 702 select ROM_UNIFIED_SECTIONS 703 imply MXC_GPIO 704 705config ARCH_MX7 706 bool "Freescale MX7" 707 select ARCH_MISC_INIT 708 select BOARD_EARLY_INIT_F 709 select CPU_V7A 710 select SYS_FSL_HAS_SEC if SECURE_BOOT 711 select SYS_FSL_SEC_COMPAT_4 712 select SYS_FSL_SEC_LE 713 imply MXC_GPIO 714 715config ARCH_MX6 716 bool "Freescale MX6" 717 select CPU_V7A 718 select SYS_FSL_HAS_SEC if SECURE_BOOT 719 select SYS_FSL_SEC_COMPAT_4 720 select SYS_FSL_SEC_LE 721 select SYS_THUMB_BUILD if SPL 722 imply MXC_GPIO 723 724if ARCH_MX6 725config SPL_LDSCRIPT 726 default "arch/arm/mach-omap2/u-boot-spl.lds" 727endif 728 729config ARCH_MX5 730 bool "Freescale MX5" 731 select BOARD_EARLY_INIT_F 732 select CPU_V7A 733 imply MXC_GPIO 734 735config ARCH_OWL 736 bool "Actions Semi OWL SoCs" 737 select ARM64 738 select DM 739 select DM_SERIAL 740 select OF_CONTROL 741 imply CMD_DM 742 743config ARCH_QEMU 744 bool "QEMU Virtual Platform" 745 select DM 746 select DM_SERIAL 747 select OF_CONTROL 748 select PL01X_SERIAL 749 imply CMD_DM 750 imply DM_RTC 751 imply RTC_PL031 752 753config ARCH_RMOBILE 754 bool "Renesas ARM SoCs" 755 select BOARD_EARLY_INIT_F 756 select DM 757 select DM_SERIAL 758 imply CMD_DM 759 imply FAT_WRITE 760 imply SYS_THUMB_BUILD 761 762config TARGET_S32V234EVB 763 bool "Support s32v234evb" 764 select ARM64 765 select SYS_FSL_ERRATUM_ESDHC111 766 767config ARCH_SNAPDRAGON 768 bool "Qualcomm Snapdragon SoCs" 769 select ARM64 770 select DM 771 select DM_GPIO 772 select DM_SERIAL 773 select MSM_SMEM 774 select OF_CONTROL 775 select OF_SEPARATE 776 select SMEM 777 select SPMI 778 imply CMD_DM 779 780config ARCH_SOCFPGA 781 bool "Altera SOCFPGA family" 782 select ARCH_EARLY_INIT_R 783 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 784 select ARM64 if TARGET_SOCFPGA_STRATIX10 785 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 786 select DM 787 select DM_SERIAL 788 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 789 select OF_CONTROL 790 select SPL_DM_RESET if DM_RESET 791 select SPL_DM_SERIAL 792 select SPL_LIBCOMMON_SUPPORT 793 select SPL_LIBDISK_SUPPORT 794 select SPL_LIBGENERIC_SUPPORT 795 select SPL_MMC_SUPPORT if DM_MMC 796 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 797 select SPL_OF_CONTROL 798 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 799 select SPL_SERIAL_SUPPORT 800 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 801 select SPL_SPI_SUPPORT if DM_SPI 802 select SPL_WATCHDOG_SUPPORT 803 select SUPPORT_SPL 804 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 805 select SYS_NS16550 806 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 807 imply CMD_DM 808 imply CMD_MTDPARTS 809 imply CRC32_VERIFY 810 imply DM_SPI 811 imply DM_SPI_FLASH 812 imply FAT_WRITE 813 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 814 815config ARCH_SUNXI 816 bool "Support sunxi (Allwinner) SoCs" 817 select BINMAN 818 select CMD_GPIO 819 select CMD_MMC if MMC 820 select CMD_USB if DISTRO_DEFAULTS 821 select DM 822 select DM_ETH 823 select DM_GPIO 824 select DM_KEYBOARD 825 select DM_SERIAL 826 select DM_USB if DISTRO_DEFAULTS 827 select OF_BOARD_SETUP 828 select OF_CONTROL 829 select OF_SEPARATE 830 select SPECIFY_CONSOLE_INDEX 831 select SPL_STACK_R if SPL 832 select SPL_SYS_MALLOC_SIMPLE if SPL 833 select SPL_SYS_THUMB_BUILD if !ARM64 834 select SYS_NS16550 835 select SYS_THUMB_BUILD if !ARM64 836 select USB if DISTRO_DEFAULTS 837 select USB_KEYBOARD if DISTRO_DEFAULTS 838 select USB_STORAGE if DISTRO_DEFAULTS 839 select USE_TINY_PRINTF 840 imply CMD_DM 841 imply CMD_GPT 842 imply CMD_UBI if NAND 843 imply DISTRO_DEFAULTS 844 imply FAT_WRITE 845 imply OF_LIBFDT_OVERLAY 846 imply PRE_CONSOLE_BUFFER 847 imply SPL_GPIO_SUPPORT 848 imply SPL_LIBCOMMON_SUPPORT 849 imply SPL_LIBDISK_SUPPORT 850 imply SPL_LIBGENERIC_SUPPORT 851 imply SPL_MMC_SUPPORT if MMC 852 imply SPL_POWER_SUPPORT 853 imply SPL_SERIAL_SUPPORT 854 imply USB_GADGET 855 856config ARCH_VERSAL 857 bool "Support Xilinx Versal Platform" 858 select ARM64 859 select CLK 860 select DM 861 select DM_SERIAL 862 select OF_CONTROL 863 864config ARCH_VF610 865 bool "Freescale Vybrid" 866 select CPU_V7A 867 select SYS_FSL_ERRATUM_ESDHC111 868 imply CMD_MTDPARTS 869 imply NAND 870 871config ARCH_ZYNQ 872 bool "Xilinx Zynq based platform" 873 select BOARD_EARLY_INIT_F if WDT 874 select CLK 875 select CLK_ZYNQ 876 select CPU_V7A 877 select DM 878 select DM_ETH if NET 879 select DM_MMC if MMC 880 select DM_SERIAL 881 select DM_SPI 882 select DM_SPI_FLASH 883 select DM_USB if USB 884 select OF_CONTROL 885 select SPI 886 select SPL_BOARD_INIT if SPL 887 select SPL_CLK if SPL 888 select SPL_DM if SPL 889 select SPL_OF_CONTROL if SPL 890 select SPL_SEPARATE_BSS if SPL 891 select SUPPORT_SPL 892 imply ARCH_EARLY_INIT_R 893 imply BOARD_LATE_INIT 894 imply CMD_CLK 895 imply CMD_DM 896 imply CMD_SPL 897 imply FAT_WRITE 898 899config ARCH_ZYNQMP_R5 900 bool "Xilinx ZynqMP R5 based platform" 901 select CLK 902 select CPU_V7R 903 select DM 904 select DM_SERIAL 905 select OF_CONTROL 906 imply CMD_DM 907 908config ARCH_ZYNQMP 909 bool "Xilinx ZynqMP based platform" 910 select ARM64 911 select CLK 912 select DM 913 select DM_SERIAL 914 select DM_USB if USB 915 select OF_CONTROL 916 select SPL_BOARD_INIT if SPL 917 select SPL_CLK if SPL 918 select SUPPORT_SPL 919 imply BOARD_LATE_INIT 920 imply CMD_DM 921 imply FAT_WRITE 922 923config TEGRA 924 bool "NVIDIA Tegra" 925 imply DISTRO_DEFAULTS 926 imply FAT_WRITE 927 928config TARGET_VEXPRESS64_AEMV8A 929 bool "Support vexpress_aemv8a" 930 select ARM64 931 select PL01X_SERIAL 932 933config TARGET_VEXPRESS64_BASE_FVP 934 bool "Support Versatile Express ARMv8a FVP BASE model" 935 select ARM64 936 select PL01X_SERIAL 937 select SEMIHOSTING 938 939config TARGET_VEXPRESS64_BASE_FVP_DRAM 940 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 941 select ARM64 942 select PL01X_SERIAL 943 help 944 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 945 the default config to allow the user to load the images directly into 946 DRAM using model parameters rather than by using semi-hosting to load 947 the files from the host filesystem. 948 949config TARGET_VEXPRESS64_JUNO 950 bool "Support Versatile Express Juno Development Platform" 951 select ARM64 952 select PL01X_SERIAL 953 954config TARGET_LS2080A_EMU 955 bool "Support ls2080a_emu" 956 select ARCH_LS2080A 957 select ARCH_MISC_INIT 958 select ARM64 959 select ARMV8_MULTIENTRY 960 help 961 Support for Freescale LS2080A_EMU platform 962 The LS2080A Development System (EMULATOR) is a pre silicon 963 development platform that supports the QorIQ LS2080A 964 Layerscape Architecture processor. 965 966config TARGET_LS2080A_SIMU 967 bool "Support ls2080a_simu" 968 select ARCH_LS2080A 969 select ARCH_MISC_INIT 970 select ARM64 971 select ARMV8_MULTIENTRY 972 help 973 Support for Freescale LS2080A_SIMU platform 974 The LS2080A Development System (QDS) is a pre silicon 975 development platform that supports the QorIQ LS2080A 976 Layerscape Architecture processor. 977 978config TARGET_LS1088AQDS 979 bool "Support ls1088aqds" 980 select ARCH_LS1088A 981 select ARCH_MISC_INIT 982 select ARM64 983 select ARMV8_MULTIENTRY 984 select BOARD_LATE_INIT 985 select SUPPORT_SPL 986 help 987 Support for NXP LS1088AQDS platform 988 The LS1088A Development System (QDS) is a high-performance 989 development platform that supports the QorIQ LS1088A 990 Layerscape Architecture processor. 991 992config TARGET_LS2080AQDS 993 bool "Support ls2080aqds" 994 select ARCH_LS2080A 995 select ARCH_MISC_INIT 996 select ARM64 997 select ARMV8_MULTIENTRY 998 select BOARD_LATE_INIT 999 select SUPPORT_SPL 1000 imply SCSI 1001 imply SCSI_AHCI 1002 help 1003 Support for Freescale LS2080AQDS platform 1004 The LS2080A Development System (QDS) is a high-performance 1005 development platform that supports the QorIQ LS2080A 1006 Layerscape Architecture processor. 1007 1008config TARGET_LS2080ARDB 1009 bool "Support ls2080ardb" 1010 select ARCH_LS2080A 1011 select ARCH_MISC_INIT 1012 select ARM64 1013 select ARMV8_MULTIENTRY 1014 select BOARD_LATE_INIT 1015 select SUPPORT_SPL 1016 imply SCSI 1017 imply SCSI_AHCI 1018 help 1019 Support for Freescale LS2080ARDB platform. 1020 The LS2080A Reference design board (RDB) is a high-performance 1021 development platform that supports the QorIQ LS2080A 1022 Layerscape Architecture processor. 1023 1024config TARGET_LS2081ARDB 1025 bool "Support ls2081ardb" 1026 select ARCH_LS2080A 1027 select ARCH_MISC_INIT 1028 select ARM64 1029 select ARMV8_MULTIENTRY 1030 select BOARD_LATE_INIT 1031 select SUPPORT_SPL 1032 help 1033 Support for Freescale LS2081ARDB platform. 1034 The LS2081A Reference design board (RDB) is a high-performance 1035 development platform that supports the QorIQ LS2081A/LS2041A 1036 Layerscape Architecture processor. 1037 1038config TARGET_HIKEY 1039 bool "Support HiKey 96boards Consumer Edition Platform" 1040 select ARM64 1041 select DM 1042 select DM_GPIO 1043 select DM_SERIAL 1044 select OF_CONTROL 1045 select PL01X_SERIAL 1046 select SPECIFY_CONSOLE_INDEX 1047 imply CMD_DM 1048 help 1049 Support for HiKey 96boards platform. It features a HI6220 1050 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1051 1052config TARGET_POPLAR 1053 bool "Support Poplar 96boards Enterprise Edition Platform" 1054 select ARM64 1055 select DM 1056 select DM_SERIAL 1057 select DM_USB 1058 select OF_CONTROL 1059 select PL01X_SERIAL 1060 imply CMD_DM 1061 help 1062 Support for Poplar 96boards EE platform. It features a HI3798cv200 1063 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1064 making it capable of running any commercial set-top solution based on 1065 Linux or Android. 1066 1067config TARGET_LS1012AQDS 1068 bool "Support ls1012aqds" 1069 select ARCH_LS1012A 1070 select ARM64 1071 select BOARD_LATE_INIT 1072 help 1073 Support for Freescale LS1012AQDS platform. 1074 The LS1012A Development System (QDS) is a high-performance 1075 development platform that supports the QorIQ LS1012A 1076 Layerscape Architecture processor. 1077 1078config TARGET_LS1012ARDB 1079 bool "Support ls1012ardb" 1080 select ARCH_LS1012A 1081 select ARM64 1082 select BOARD_LATE_INIT 1083 imply SCSI 1084 imply SCSI_AHCI 1085 help 1086 Support for Freescale LS1012ARDB platform. 1087 The LS1012A Reference design board (RDB) is a high-performance 1088 development platform that supports the QorIQ LS1012A 1089 Layerscape Architecture processor. 1090 1091config TARGET_LS1012A2G5RDB 1092 bool "Support ls1012a2g5rdb" 1093 select ARCH_LS1012A 1094 select ARM64 1095 select BOARD_LATE_INIT 1096 imply SCSI 1097 help 1098 Support for Freescale LS1012A2G5RDB platform. 1099 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1100 development platform that supports the QorIQ LS1012A 1101 Layerscape Architecture processor. 1102 1103config TARGET_LS1012AFRWY 1104 bool "Support ls1012afrwy" 1105 select ARCH_LS1012A 1106 select ARM64 1107 select BOARD_LATE_INIT 1108 imply SCSI 1109 imply SCSI_AHCI 1110 help 1111 Support for Freescale LS1012AFRWY platform. 1112 The LS1012A FRWY board (FRWY) is a high-performance 1113 development platform that supports the QorIQ LS1012A 1114 Layerscape Architecture processor. 1115 1116config TARGET_LS1012AFRDM 1117 bool "Support ls1012afrdm" 1118 select ARCH_LS1012A 1119 select ARM64 1120 help 1121 Support for Freescale LS1012AFRDM platform. 1122 The LS1012A Freedom board (FRDM) is a high-performance 1123 development platform that supports the QorIQ LS1012A 1124 Layerscape Architecture processor. 1125 1126config TARGET_LS1088ARDB 1127 bool "Support ls1088ardb" 1128 select ARCH_LS1088A 1129 select ARCH_MISC_INIT 1130 select ARM64 1131 select ARMV8_MULTIENTRY 1132 select BOARD_LATE_INIT 1133 select SUPPORT_SPL 1134 help 1135 Support for NXP LS1088ARDB platform. 1136 The LS1088A Reference design board (RDB) is a high-performance 1137 development platform that supports the QorIQ LS1088A 1138 Layerscape Architecture processor. 1139 1140config TARGET_LS1021AQDS 1141 bool "Support ls1021aqds" 1142 select ARCH_LS1021A 1143 select ARCH_SUPPORT_PSCI 1144 select BOARD_EARLY_INIT_F 1145 select BOARD_LATE_INIT 1146 select CPU_V7A 1147 select CPU_V7_HAS_NONSEC 1148 select CPU_V7_HAS_VIRT 1149 select LS1_DEEP_SLEEP 1150 select SUPPORT_SPL 1151 select SYS_FSL_DDR 1152 imply SCSI 1153 1154config TARGET_LS1021ATWR 1155 bool "Support ls1021atwr" 1156 select ARCH_LS1021A 1157 select ARCH_SUPPORT_PSCI 1158 select BOARD_EARLY_INIT_F 1159 select BOARD_LATE_INIT 1160 select CPU_V7A 1161 select CPU_V7_HAS_NONSEC 1162 select CPU_V7_HAS_VIRT 1163 select LS1_DEEP_SLEEP 1164 select SUPPORT_SPL 1165 imply SCSI 1166 1167config TARGET_LS1021AIOT 1168 bool "Support ls1021aiot" 1169 select ARCH_LS1021A 1170 select ARCH_SUPPORT_PSCI 1171 select BOARD_LATE_INIT 1172 select CPU_V7A 1173 select CPU_V7_HAS_NONSEC 1174 select CPU_V7_HAS_VIRT 1175 select SUPPORT_SPL 1176 imply SCSI 1177 help 1178 Support for Freescale LS1021AIOT platform. 1179 The LS1021A Freescale board (IOT) is a high-performance 1180 development platform that supports the QorIQ LS1021A 1181 Layerscape Architecture processor. 1182 1183config TARGET_LS1043AQDS 1184 bool "Support ls1043aqds" 1185 select ARCH_LS1043A 1186 select ARM64 1187 select ARMV8_MULTIENTRY 1188 select BOARD_EARLY_INIT_F 1189 select BOARD_LATE_INIT 1190 select SUPPORT_SPL 1191 imply SCSI 1192 help 1193 Support for Freescale LS1043AQDS platform. 1194 1195config TARGET_LS1043ARDB 1196 bool "Support ls1043ardb" 1197 select ARCH_LS1043A 1198 select ARM64 1199 select ARMV8_MULTIENTRY 1200 select BOARD_EARLY_INIT_F 1201 select BOARD_LATE_INIT 1202 select SUPPORT_SPL 1203 imply SCSI 1204 help 1205 Support for Freescale LS1043ARDB platform. 1206 1207config TARGET_LS1046AQDS 1208 bool "Support ls1046aqds" 1209 select ARCH_LS1046A 1210 select ARM64 1211 select ARMV8_MULTIENTRY 1212 select BOARD_EARLY_INIT_F 1213 select BOARD_LATE_INIT 1214 select DM_SPI_FLASH if DM_SPI 1215 select SUPPORT_SPL 1216 imply SCSI 1217 help 1218 Support for Freescale LS1046AQDS platform. 1219 The LS1046A Development System (QDS) is a high-performance 1220 development platform that supports the QorIQ LS1046A 1221 Layerscape Architecture processor. 1222 1223config TARGET_LS1046ARDB 1224 bool "Support ls1046ardb" 1225 select ARCH_LS1046A 1226 select ARM64 1227 select ARMV8_MULTIENTRY 1228 select BOARD_EARLY_INIT_F 1229 select BOARD_LATE_INIT 1230 select DM_SPI_FLASH if DM_SPI 1231 select POWER_MC34VR500 1232 select SUPPORT_SPL 1233 imply SCSI 1234 help 1235 Support for Freescale LS1046ARDB platform. 1236 The LS1046A Reference Design Board (RDB) is a high-performance 1237 development platform that supports the QorIQ LS1046A 1238 Layerscape Architecture processor. 1239 1240config TARGET_H2200 1241 bool "Support h2200" 1242 select CPU_PXA 1243 1244config TARGET_ZIPITZ2 1245 bool "Support zipitz2" 1246 select CPU_PXA 1247 1248config TARGET_COLIBRI_PXA270 1249 bool "Support colibri_pxa270" 1250 select CPU_PXA 1251 1252config ARCH_UNIPHIER 1253 bool "Socionext UniPhier SoCs" 1254 select BOARD_LATE_INIT 1255 select DM 1256 select DM_GPIO 1257 select DM_I2C 1258 select DM_MMC 1259 select DM_RESET 1260 select DM_SERIAL 1261 select DM_USB 1262 select OF_BOARD_SETUP 1263 select OF_CONTROL 1264 select OF_LIBFDT 1265 select PINCTRL 1266 select SPL_BOARD_INIT if SPL 1267 select SPL_DM if SPL 1268 select SPL_LIBCOMMON_SUPPORT if SPL 1269 select SPL_LIBGENERIC_SUPPORT if SPL 1270 select SPL_OF_CONTROL if SPL 1271 select SPL_PINCTRL if SPL 1272 select SUPPORT_SPL 1273 imply CMD_DM 1274 imply DISTRO_DEFAULTS 1275 imply FAT_WRITE 1276 help 1277 Support for UniPhier SoC family developed by Socionext Inc. 1278 (formerly, System LSI Business Division of Panasonic Corporation) 1279 1280config STM32 1281 bool "Support STMicroelectronics STM32 MCU with cortex M" 1282 select CPU_V7M 1283 select DM 1284 select DM_SERIAL 1285 imply CMD_DM 1286 1287config ARCH_STI 1288 bool "Support STMicrolectronics SoCs" 1289 select BLK 1290 select CPU_V7A 1291 select DM 1292 select DM_MMC 1293 select DM_RESET 1294 select DM_SERIAL 1295 imply CMD_DM 1296 help 1297 Support for STMicroelectronics STiH407/10 SoC family. 1298 This SoC is used on Linaro 96Board STiH410-B2260 1299 1300config ARCH_STM32MP 1301 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1302 select ARCH_MISC_INIT 1303 select BOARD_LATE_INIT 1304 select CLK 1305 select DM 1306 select DM_GPIO 1307 select DM_RESET 1308 select DM_SERIAL 1309 select MISC 1310 select OF_CONTROL 1311 select OF_LIBFDT 1312 select PINCTRL 1313 select REGMAP 1314 select SUPPORT_SPL 1315 select SYSCON 1316 select SYSRESET 1317 select SYS_THUMB_BUILD 1318 imply CMD_DM 1319 help 1320 Support for STM32MP SoC family developed by STMicroelectronics, 1321 MPUs based on ARM cortex A core 1322 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1323 BootLoader (FSBL) 1324 1325config ARCH_ROCKCHIP 1326 bool "Support Rockchip SoCs" 1327 select BLK 1328 select DM 1329 select DM_GPIO 1330 select DM_I2C 1331 select DM_MMC 1332 select DM_PWM 1333 select DM_REGULATOR 1334 select DM_SERIAL 1335 select DM_SPI 1336 select DM_SPI_FLASH 1337 select DM_USB if USB 1338 select ENABLE_ARM_SOC_BOOT0_HOOK 1339 select OF_CONTROL 1340 select SPI 1341 select SPL_DM if SPL 1342 select SPL_SYS_MALLOC_SIMPLE if SPL 1343 select SYS_MALLOC_F 1344 select SYS_THUMB_BUILD if !ARM64 1345 imply ADC 1346 imply CMD_DM 1347 imply DISTRO_DEFAULTS 1348 imply FAT_WRITE 1349 imply SARADC_ROCKCHIP 1350 imply SPL_SYSRESET 1351 imply SYS_NS16550 1352 imply TPL_SYSRESET 1353 imply USB_FUNCTION_FASTBOOT 1354 1355config TARGET_THUNDERX_88XX 1356 bool "Support ThunderX 88xx" 1357 select ARM64 1358 select OF_CONTROL 1359 select PL01X_SERIAL 1360 select SYS_CACHE_SHIFT_7 1361 1362config ARCH_ASPEED 1363 bool "Support Aspeed SoCs" 1364 select DM 1365 select OF_CONTROL 1366 imply CMD_DM 1367 1368endchoice 1369 1370config TI_SECURE_DEVICE 1371 bool "HS Device Type Support" 1372 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1373 help 1374 If a high secure (HS) device type is being used, this config 1375 must be set. This option impacts various aspects of the 1376 build system (to create signed boot images that can be 1377 authenticated) and the code. See the doc/README.ti-secure 1378 file for further details. 1379 1380source "arch/arm/mach-aspeed/Kconfig" 1381 1382source "arch/arm/mach-at91/Kconfig" 1383 1384source "arch/arm/mach-bcm283x/Kconfig" 1385 1386source "arch/arm/mach-bcmstb/Kconfig" 1387 1388source "arch/arm/mach-davinci/Kconfig" 1389 1390source "arch/arm/mach-exynos/Kconfig" 1391 1392source "arch/arm/mach-highbank/Kconfig" 1393 1394source "arch/arm/mach-integrator/Kconfig" 1395 1396source "arch/arm/mach-k3/Kconfig" 1397 1398source "arch/arm/mach-keystone/Kconfig" 1399 1400source "arch/arm/mach-kirkwood/Kconfig" 1401 1402source "arch/arm/mach-mvebu/Kconfig" 1403 1404source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1405 1406source "arch/arm/mach-imx/mx2/Kconfig" 1407 1408source "arch/arm/mach-imx/mx3/Kconfig" 1409 1410source "arch/arm/mach-imx/mx5/Kconfig" 1411 1412source "arch/arm/mach-imx/mx6/Kconfig" 1413 1414source "arch/arm/mach-imx/mx7/Kconfig" 1415 1416source "arch/arm/mach-imx/mx7ulp/Kconfig" 1417 1418source "arch/arm/mach-imx/mx8m/Kconfig" 1419 1420source "arch/arm/mach-imx/mxs/Kconfig" 1421 1422source "arch/arm/mach-omap2/Kconfig" 1423 1424source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1425 1426source "arch/arm/mach-orion5x/Kconfig" 1427 1428source "arch/arm/mach-owl/Kconfig" 1429 1430source "arch/arm/mach-rmobile/Kconfig" 1431 1432source "arch/arm/mach-meson/Kconfig" 1433 1434source "arch/arm/mach-qemu/Kconfig" 1435 1436source "arch/arm/mach-rockchip/Kconfig" 1437 1438source "arch/arm/mach-s5pc1xx/Kconfig" 1439 1440source "arch/arm/mach-snapdragon/Kconfig" 1441 1442source "arch/arm/mach-socfpga/Kconfig" 1443 1444source "arch/arm/mach-sti/Kconfig" 1445 1446source "arch/arm/mach-stm32/Kconfig" 1447 1448source "arch/arm/mach-stm32mp/Kconfig" 1449 1450source "arch/arm/mach-sunxi/Kconfig" 1451 1452source "arch/arm/mach-tegra/Kconfig" 1453 1454source "arch/arm/mach-uniphier/Kconfig" 1455 1456source "arch/arm/cpu/armv7/vf610/Kconfig" 1457 1458source "arch/arm/mach-zynq/Kconfig" 1459 1460source "arch/arm/mach-versal/Kconfig" 1461 1462source "arch/arm/mach-zynqmp-r5/Kconfig" 1463 1464source "arch/arm/cpu/armv7/Kconfig" 1465 1466source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1467 1468source "arch/arm/cpu/armv8/Kconfig" 1469 1470source "arch/arm/mach-imx/Kconfig" 1471 1472source "board/bosch/shc/Kconfig" 1473source "board/CarMediaLab/flea3/Kconfig" 1474source "board/Marvell/aspenite/Kconfig" 1475source "board/Marvell/gplugd/Kconfig" 1476source "board/armadeus/apf27/Kconfig" 1477source "board/armltd/vexpress/Kconfig" 1478source "board/armltd/vexpress64/Kconfig" 1479source "board/broadcom/bcm23550_w1d/Kconfig" 1480source "board/broadcom/bcm28155_ap/Kconfig" 1481source "board/broadcom/bcmcygnus/Kconfig" 1482source "board/broadcom/bcmnsp/Kconfig" 1483source "board/broadcom/bcmns2/Kconfig" 1484source "board/cavium/thunderx/Kconfig" 1485source "board/cirrus/edb93xx/Kconfig" 1486source "board/eets/pdu001/Kconfig" 1487source "board/freescale/ls2080a/Kconfig" 1488source "board/freescale/ls2080aqds/Kconfig" 1489source "board/freescale/ls2080ardb/Kconfig" 1490source "board/freescale/ls1088a/Kconfig" 1491source "board/freescale/ls1021aqds/Kconfig" 1492source "board/freescale/ls1043aqds/Kconfig" 1493source "board/freescale/ls1021atwr/Kconfig" 1494source "board/freescale/ls1021aiot/Kconfig" 1495source "board/freescale/ls1046aqds/Kconfig" 1496source "board/freescale/ls1043ardb/Kconfig" 1497source "board/freescale/ls1046ardb/Kconfig" 1498source "board/freescale/ls1012aqds/Kconfig" 1499source "board/freescale/ls1012ardb/Kconfig" 1500source "board/freescale/ls1012afrdm/Kconfig" 1501source "board/freescale/mx35pdk/Kconfig" 1502source "board/freescale/s32v234evb/Kconfig" 1503source "board/grinn/chiliboard/Kconfig" 1504source "board/gumstix/pepper/Kconfig" 1505source "board/h2200/Kconfig" 1506source "board/hisilicon/hikey/Kconfig" 1507source "board/hisilicon/poplar/Kconfig" 1508source "board/isee/igep003x/Kconfig" 1509source "board/phytec/pcm051/Kconfig" 1510source "board/silica/pengwyn/Kconfig" 1511source "board/spear/spear300/Kconfig" 1512source "board/spear/spear310/Kconfig" 1513source "board/spear/spear320/Kconfig" 1514source "board/spear/spear600/Kconfig" 1515source "board/spear/x600/Kconfig" 1516source "board/st/stv0991/Kconfig" 1517source "board/tcl/sl50/Kconfig" 1518source "board/ucRobotics/bubblegum_96/Kconfig" 1519source "board/birdland/bav335x/Kconfig" 1520source "board/timll/devkit3250/Kconfig" 1521source "board/toradex/colibri_pxa270/Kconfig" 1522source "board/vscom/baltos/Kconfig" 1523source "board/woodburn/Kconfig" 1524source "board/work-microwave/work_92105/Kconfig" 1525source "board/xilinx/Kconfig" 1526source "board/xilinx/zynq/Kconfig" 1527source "board/xilinx/zynqmp/Kconfig" 1528source "board/zipitz2/Kconfig" 1529 1530source "arch/arm/Kconfig.debug" 1531 1532endmenu 1533 1534config SPL_LDSCRIPT 1535 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1536 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1537 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1538 1539 1540