1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# If set, the workarounds for these ARM errata are applied early during U-Boot 23# startup. Note that in general these options force the workarounds to be 24# applied; no CPU-type/version detection exists, unlike the similar options in 25# the Linux kernel. Do not set these options unless they apply! Also note that 26# the following can be machine specific errata. These do have ability to 27# provide rudimentary version and machine specific checks, but expect no 28# product checks: 29# CONFIG_ARM_ERRATA_430973 30# CONFIG_ARM_ERRATA_454179 31# CONFIG_ARM_ERRATA_621766 32# CONFIG_ARM_ERRATA_798870 33# CONFIG_ARM_ERRATA_801819 34config ARM_ERRATA_430973 35 bool 36 37config ARM_ERRATA_454179 38 bool 39 40config ARM_ERRATA_621766 41 bool 42 43config ARM_ERRATA_716044 44 bool 45 46config ARM_ERRATA_725233 47 bool 48 49config ARM_ERRATA_742230 50 bool 51 52config ARM_ERRATA_743622 53 bool 54 55config ARM_ERRATA_751472 56 bool 57 58config ARM_ERRATA_761320 59 bool 60 61config ARM_ERRATA_773022 62 bool 63 64config ARM_ERRATA_774769 65 bool 66 67config ARM_ERRATA_794072 68 bool 69 70config ARM_ERRATA_798870 71 bool 72 73config ARM_ERRATA_801819 74 bool 75 76config ARM_ERRATA_826974 77 bool 78 79config ARM_ERRATA_828024 80 bool 81 82config ARM_ERRATA_829520 83 bool 84 85config ARM_ERRATA_833069 86 bool 87 88config ARM_ERRATA_833471 89 bool 90 91config ARM_ERRATA_852421 92 bool 93 94config ARM_ERRATA_852423 95 bool 96 97config CPU_ARM720T 98 bool 99 select SYS_CACHE_SHIFT_5 100 101config CPU_ARM920T 102 bool 103 select SYS_CACHE_SHIFT_5 104 105config CPU_ARM926EJS 106 bool 107 select SYS_CACHE_SHIFT_5 108 109config CPU_ARM946ES 110 bool 111 select SYS_CACHE_SHIFT_5 112 113config CPU_ARM1136 114 bool 115 select SYS_CACHE_SHIFT_5 116 117config CPU_ARM1176 118 bool 119 select HAS_VBAR 120 select SYS_CACHE_SHIFT_5 121 122config CPU_V7 123 bool 124 select HAS_VBAR 125 select HAS_THUMB2 126 select SYS_CACHE_SHIFT_6 127 128config CPU_V7M 129 bool 130 select HAS_THUMB2 131 select SYS_CACHE_SHIFT_5 132 133config CPU_PXA 134 bool 135 select SYS_CACHE_SHIFT_5 136 137config CPU_SA1100 138 bool 139 select SYS_CACHE_SHIFT_5 140 141config SYS_CPU 142 default "arm720t" if CPU_ARM720T 143 default "arm920t" if CPU_ARM920T 144 default "arm926ejs" if CPU_ARM926EJS 145 default "arm946es" if CPU_ARM946ES 146 default "arm1136" if CPU_ARM1136 147 default "arm1176" if CPU_ARM1176 148 default "armv7" if CPU_V7 149 default "armv7m" if CPU_V7M 150 default "pxa" if CPU_PXA 151 default "sa1100" if CPU_SA1100 152 default "armv8" if ARM64 153 154config SYS_ARM_ARCH 155 int 156 default 4 if CPU_ARM720T 157 default 4 if CPU_ARM920T 158 default 5 if CPU_ARM926EJS 159 default 5 if CPU_ARM946ES 160 default 6 if CPU_ARM1136 161 default 6 if CPU_ARM1176 162 default 7 if CPU_V7 163 default 7 if CPU_V7M 164 default 5 if CPU_PXA 165 default 4 if CPU_SA1100 166 default 8 if ARM64 167 168config SYS_CACHE_SHIFT_5 169 bool 170 171config SYS_CACHE_SHIFT_6 172 bool 173 174config SYS_CACHE_SHIFT_7 175 bool 176 177config SYS_CACHELINE_SIZE 178 int 179 default 128 if SYS_CACHE_SHIFT_7 180 default 64 if SYS_CACHE_SHIFT_6 181 default 32 if SYS_CACHE_SHIFT_5 182 183config ARM_SMCCC 184 bool "Support for ARM SMC Calling Convention (SMCCC)" 185 depends on CPU_V7 || ARM64 186 select ARM_PSCI_FW 187 help 188 Say Y here if you want to enable ARM SMC Calling Convention. 189 This should be enabled if U-Boot needs to communicate with system 190 firmware (for example, PSCI) according to SMCCC. 191 192config SEMIHOSTING 193 bool "support boot from semihosting" 194 help 195 In emulated environments, semihosting is a way for 196 the hosted environment to call out to the emulator to 197 retrieve files from the host machine. 198 199config SYS_THUMB_BUILD 200 bool "Build U-Boot using the Thumb instruction set" 201 depends on !ARM64 202 help 203 Use this flag to build U-Boot using the Thumb instruction set for 204 ARM architectures. Thumb instruction set provides better code 205 density. For ARM architectures that support Thumb2 this flag will 206 result in Thumb2 code generated by GCC. 207 208config SPL_SYS_THUMB_BUILD 209 bool "Build SPL using the Thumb instruction set" 210 default y if SYS_THUMB_BUILD 211 depends on !ARM64 212 help 213 Use this flag to build SPL using the Thumb instruction set for 214 ARM architectures. Thumb instruction set provides better code 215 density. For ARM architectures that support Thumb2 this flag will 216 result in Thumb2 code generated by GCC. 217 218config SYS_L2CACHE_OFF 219 bool "L2cache off" 220 help 221 If SoC does not support L2CACHE or one do not want to enable 222 L2CACHE, choose this option. 223 224config ENABLE_ARM_SOC_BOOT0_HOOK 225 bool "prepare BOOT0 header" 226 help 227 If the SoC's BOOT0 requires a header area filled with (magic) 228 values, then choose this option, and create a define called 229 ARM_SOC_BOOT0_HOOK which contains the required assembler 230 preprocessor code. 231 232config ARM_CORTEX_CPU_IS_UP 233 bool 234 default n 235 236config USE_ARCH_MEMCPY 237 bool "Use an assembly optimized implementation of memcpy" 238 default y 239 depends on !ARM64 240 help 241 Enable the generation of an optimized version of memcpy. 242 Such implementation may be faster under some conditions 243 but may increase the binary size. 244 245config SPL_USE_ARCH_MEMCPY 246 bool "Use an assembly optimized implementation of memcpy" 247 default y if USE_ARCH_MEMCPY 248 depends on !ARM64 249 help 250 Enable the generation of an optimized version of memcpy. 251 Such implementation may be faster under some conditions 252 but may increase the binary size. 253 254config USE_ARCH_MEMSET 255 bool "Use an assembly optimized implementation of memset" 256 default y 257 depends on !ARM64 258 help 259 Enable the generation of an optimized version of memset. 260 Such implementation may be faster under some conditions 261 but may increase the binary size. 262 263config SPL_USE_ARCH_MEMSET 264 bool "Use an assembly optimized implementation of memset" 265 default y if USE_ARCH_MEMSET 266 depends on !ARM64 267 help 268 Enable the generation of an optimized version of memset. 269 Such implementation may be faster under some conditions 270 but may increase the binary size. 271 272config ARM64_SUPPORT_AARCH32 273 bool "ARM64 system support AArch32 execution state" 274 default y if ARM64 && !TARGET_THUNDERX_88XX 275 help 276 This ARM64 system supports AArch32 execution state. 277 278choice 279 prompt "Target select" 280 default TARGET_HIKEY 281 282config ARCH_AT91 283 bool "Atmel AT91" 284 select SPL_BOARD_INIT if SPL 285 286config TARGET_EDB93XX 287 bool "Support edb93xx" 288 select CPU_ARM920T 289 290config TARGET_ASPENITE 291 bool "Support aspenite" 292 select CPU_ARM926EJS 293 294config TARGET_GPLUGD 295 bool "Support gplugd" 296 select CPU_ARM926EJS 297 298config ARCH_DAVINCI 299 bool "TI DaVinci" 300 select CPU_ARM926EJS 301 help 302 Support for TI's DaVinci platform. 303 304config KIRKWOOD 305 bool "Marvell Kirkwood" 306 select CPU_ARM926EJS 307 select BOARD_EARLY_INIT_F 308 select ARCH_MISC_INIT 309 310config ARCH_MVEBU 311 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 312 select OF_CONTROL 313 select OF_SEPARATE 314 select DM 315 select DM_ETH 316 select DM_SERIAL 317 select DM_SPI 318 select DM_SPI_FLASH 319 320config TARGET_DEVKIT3250 321 bool "Support devkit3250" 322 select CPU_ARM926EJS 323 select SUPPORT_SPL 324 325config TARGET_WORK_92105 326 bool "Support work_92105" 327 select CPU_ARM926EJS 328 select SUPPORT_SPL 329 330config TARGET_MX25PDK 331 bool "Support mx25pdk" 332 select BOARD_LATE_INIT 333 select CPU_ARM926EJS 334 select BOARD_EARLY_INIT_F 335 336config TARGET_ZMX25 337 bool "Support zmx25" 338 select BOARD_LATE_INIT 339 select CPU_ARM926EJS 340 341config TARGET_APF27 342 bool "Support apf27" 343 select CPU_ARM926EJS 344 select SUPPORT_SPL 345 346config TARGET_APX4DEVKIT 347 bool "Support apx4devkit" 348 select CPU_ARM926EJS 349 select SUPPORT_SPL 350 351config TARGET_XFI3 352 bool "Support xfi3" 353 select CPU_ARM926EJS 354 select SUPPORT_SPL 355 356config TARGET_M28EVK 357 bool "Support m28evk" 358 select CPU_ARM926EJS 359 select SUPPORT_SPL 360 361config TARGET_MX23EVK 362 bool "Support mx23evk" 363 select CPU_ARM926EJS 364 select SUPPORT_SPL 365 select BOARD_EARLY_INIT_F 366 367config TARGET_MX28EVK 368 bool "Support mx28evk" 369 select CPU_ARM926EJS 370 select SUPPORT_SPL 371 select BOARD_EARLY_INIT_F 372 373config TARGET_MX23_OLINUXINO 374 bool "Support mx23_olinuxino" 375 select CPU_ARM926EJS 376 select SUPPORT_SPL 377 select BOARD_EARLY_INIT_F 378 379config TARGET_BG0900 380 bool "Support bg0900" 381 select CPU_ARM926EJS 382 select SUPPORT_SPL 383 384config TARGET_SANSA_FUZE_PLUS 385 bool "Support sansa_fuze_plus" 386 select CPU_ARM926EJS 387 select SUPPORT_SPL 388 389config TARGET_SC_SPS_1 390 bool "Support sc_sps_1" 391 select CPU_ARM926EJS 392 select SUPPORT_SPL 393 394config ORION5X 395 bool "Marvell Orion" 396 select CPU_ARM926EJS 397 398config TARGET_SPEAR300 399 bool "Support spear300" 400 select CPU_ARM926EJS 401 select BOARD_EARLY_INIT_F 402 403config TARGET_SPEAR310 404 bool "Support spear310" 405 select CPU_ARM926EJS 406 select BOARD_EARLY_INIT_F 407 408config TARGET_SPEAR320 409 bool "Support spear320" 410 select CPU_ARM926EJS 411 select BOARD_EARLY_INIT_F 412 413config TARGET_SPEAR600 414 bool "Support spear600" 415 select CPU_ARM926EJS 416 select BOARD_EARLY_INIT_F 417 418config TARGET_STV0991 419 bool "Support stv0991" 420 select CPU_V7 421 select DM 422 select DM_SERIAL 423 select DM_SPI 424 select DM_SPI_FLASH 425 select SPI_FLASH 426 427config TARGET_X600 428 bool "Support x600" 429 select BOARD_LATE_INIT 430 select CPU_ARM926EJS 431 select SUPPORT_SPL 432 433config TARGET_IMX31_PHYCORE 434 bool "Support imx31_phycore_eet" 435 select CPU_ARM1136 436 select BOARD_EARLY_INIT_F 437 438config TARGET_IMX31_PHYCORE_EET 439 bool "Support imx31_phycore_eet" 440 select BOARD_LATE_INIT 441 select CPU_ARM1136 442 select BOARD_EARLY_INIT_F 443 444config TARGET_MX31ADS 445 bool "Support mx31ads" 446 select CPU_ARM1136 447 select BOARD_EARLY_INIT_F 448 449config TARGET_MX31PDK 450 bool "Support mx31pdk" 451 select BOARD_LATE_INIT 452 select CPU_ARM1136 453 select SUPPORT_SPL 454 select BOARD_EARLY_INIT_F 455 456config TARGET_WOODBURN 457 bool "Support woodburn" 458 select CPU_ARM1136 459 460config TARGET_WOODBURN_SD 461 bool "Support woodburn_sd" 462 select CPU_ARM1136 463 select SUPPORT_SPL 464 465config TARGET_FLEA3 466 bool "Support flea3" 467 select CPU_ARM1136 468 469config TARGET_MX35PDK 470 bool "Support mx35pdk" 471 select BOARD_LATE_INIT 472 select CPU_ARM1136 473 474config ARCH_BCM283X 475 bool "Broadcom BCM283X family" 476 select DM 477 select DM_SERIAL 478 select DM_GPIO 479 select OF_CONTROL 480 481config TARGET_VEXPRESS_CA15_TC2 482 bool "Support vexpress_ca15_tc2" 483 select CPU_V7 484 select CPU_V7_HAS_NONSEC 485 select CPU_V7_HAS_VIRT 486 487config TARGET_VEXPRESS_CA5X2 488 bool "Support vexpress_ca5x2" 489 select CPU_V7 490 491config TARGET_VEXPRESS_CA9X4 492 bool "Support vexpress_ca9x4" 493 select CPU_V7 494 495config TARGET_BCM23550_W1D 496 bool "Support bcm23550_w1d" 497 select CPU_V7 498 499config TARGET_BCM28155_AP 500 bool "Support bcm28155_ap" 501 select CPU_V7 502 503config TARGET_BCMCYGNUS 504 bool "Support bcmcygnus" 505 select CPU_V7 506 imply CMD_HASH 507 508config TARGET_BCMNSP 509 bool "Support bcmnsp" 510 select CPU_V7 511 512config TARGET_BCMNS2 513 bool "Support Broadcom Northstar2" 514 select ARM64 515 help 516 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 517 ARMv8 Cortex-A57 processors targeting a broad range of networking 518 applications 519 520config ARCH_EXYNOS 521 bool "Samsung EXYNOS" 522 select DM 523 select DM_I2C 524 select DM_SPI_FLASH 525 select DM_SERIAL 526 select DM_SPI 527 select DM_GPIO 528 select DM_KEYBOARD 529 530config ARCH_S5PC1XX 531 bool "Samsung S5PC1XX" 532 select CPU_V7 533 select DM 534 select DM_SERIAL 535 select DM_GPIO 536 select DM_I2C 537 538config ARCH_HIGHBANK 539 bool "Calxeda Highbank" 540 select CPU_V7 541 542config ARCH_INTEGRATOR 543 bool "ARM Ltd. Integrator family" 544 select DM 545 select DM_SERIAL 546 547config ARCH_KEYSTONE 548 bool "TI Keystone" 549 select CPU_V7 550 select SUPPORT_SPL 551 select SYS_THUMB_BUILD 552 select CMD_POWEROFF 553 imply FIT 554 555config ARCH_OMAP2PLUS 556 bool "TI OMAP2+" 557 select CPU_V7 558 select SPL_BOARD_INIT if SPL 559 select SUPPORT_SPL 560 imply FIT 561 562config ARCH_MESON 563 bool "Amlogic Meson" 564 help 565 Support for the Meson SoC family developed by Amlogic Inc., 566 targeted at media players and tablet computers. We currently 567 support the S905 (GXBaby) 64-bit SoC. 568 569config ARCH_MX7ULP 570 bool "NXP MX7ULP" 571 select CPU_V7 572 select ROM_UNIFIED_SECTIONS 573 574config ARCH_MX7 575 bool "Freescale MX7" 576 select CPU_V7 577 select SYS_FSL_HAS_SEC if SECURE_BOOT 578 select SYS_FSL_SEC_COMPAT_4 579 select SYS_FSL_SEC_LE 580 select BOARD_EARLY_INIT_F 581 select ARCH_MISC_INIT 582 583config ARCH_MX6 584 bool "Freescale MX6" 585 select CPU_V7 586 select SYS_FSL_HAS_SEC if SECURE_BOOT 587 select SYS_FSL_SEC_COMPAT_4 588 select SYS_FSL_SEC_LE 589 select SYS_THUMB_BUILD if SPL 590 591config ARCH_MX5 592 bool "Freescale MX5" 593 select CPU_V7 594 select BOARD_EARLY_INIT_F 595 596config ARCH_RMOBILE 597 bool "Renesas ARM SoCs" 598 select DM 599 select DM_SERIAL 600 select BOARD_EARLY_INIT_F 601 imply SYS_THUMB_BUILD 602 603config TARGET_S32V234EVB 604 bool "Support s32v234evb" 605 select ARM64 606 select SYS_FSL_ERRATUM_ESDHC111 607 608config ARCH_SNAPDRAGON 609 bool "Qualcomm Snapdragon SoCs" 610 select ARM64 611 select DM 612 select DM_GPIO 613 select DM_SERIAL 614 select SPMI 615 select OF_CONTROL 616 select OF_SEPARATE 617 618config ARCH_SOCFPGA 619 bool "Altera SOCFPGA family" 620 select CPU_V7 621 select SUPPORT_SPL 622 select OF_CONTROL 623 select SPL_OF_CONTROL 624 select DM 625 select DM_SPI_FLASH 626 select DM_SPI 627 select ENABLE_ARM_SOC_BOOT0_HOOK 628 select ARCH_EARLY_INIT_R 629 select ARCH_MISC_INIT 630 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 631 select SYS_THUMB_BUILD 632 633config ARCH_SUNXI 634 bool "Support sunxi (Allwinner) SoCs" 635 select CMD_GPIO 636 select CMD_MMC if MMC 637 select CMD_USB if DISTRO_DEFAULTS 638 select DM 639 select DM_ETH 640 select DM_GPIO 641 select DM_KEYBOARD 642 select DM_SERIAL 643 select DM_USB if DISTRO_DEFAULTS 644 select OF_BOARD_SETUP 645 select OF_CONTROL 646 select OF_SEPARATE 647 select SPL_STACK_R if SUPPORT_SPL 648 select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL 649 select SYS_NS16550 650 select SPL_SYS_THUMB_BUILD if !ARM64 651 select USB if DISTRO_DEFAULTS 652 select USB_STORAGE if DISTRO_DEFAULTS 653 select USB_KEYBOARD if DISTRO_DEFAULTS 654 select USE_TINY_PRINTF 655 imply PRE_CONSOLE_BUFFER 656 imply SPL_GPIO_SUPPORT 657 imply SPL_LIBCOMMON_SUPPORT 658 imply SPL_LIBDISK_SUPPORT 659 imply SPL_LIBGENERIC_SUPPORT 660 imply SPL_MMC_SUPPORT if MMC 661 imply SPL_POWER_SUPPORT 662 imply SPL_SERIAL_SUPPORT 663 664config TARGET_TS4600 665 bool "Support TS4600" 666 select CPU_ARM926EJS 667 select SUPPORT_SPL 668 669config ARCH_VF610 670 bool "Freescale Vybrid" 671 select CPU_V7 672 select SYS_FSL_ERRATUM_ESDHC111 673 674config ARCH_ZYNQ 675 bool "Xilinx Zynq Platform" 676 select BOARD_LATE_INIT 677 select CPU_V7 678 select SUPPORT_SPL 679 select OF_CONTROL 680 select SPL_BOARD_INIT if SPL 681 select SPL_OF_CONTROL if SPL 682 select DM 683 select DM_ETH 684 select DM_GPIO 685 select SPL_DM if SPL 686 select DM_MMC 687 select DM_MMC_OPS 688 select DM_SPI 689 select DM_SERIAL 690 select DM_SPI_FLASH 691 select SPL_SEPARATE_BSS if SPL 692 select DM_USB if USB 693 select BLK 694 select CLK 695 select SPL_CLK 696 select CLK_ZYNQ 697 imply CMD_CLK 698 699config ARCH_ZYNQMP 700 bool "Support Xilinx ZynqMP Platform" 701 select ARM64 702 select BOARD_LATE_INIT 703 select DM 704 select OF_CONTROL 705 select DM_SERIAL 706 select SUPPORT_SPL 707 select CLK 708 select SPL_BOARD_INIT if SPL 709 select SPL_CLK 710 select DM_USB if USB 711 712config TEGRA 713 bool "NVIDIA Tegra" 714 715config TARGET_VEXPRESS64_AEMV8A 716 bool "Support vexpress_aemv8a" 717 select ARM64 718 719config TARGET_VEXPRESS64_BASE_FVP 720 bool "Support Versatile Express ARMv8a FVP BASE model" 721 select ARM64 722 select SEMIHOSTING 723 724config TARGET_VEXPRESS64_BASE_FVP_DRAM 725 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 726 select ARM64 727 help 728 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 729 the default config to allow the user to load the images directly into 730 DRAM using model parameters rather than by using semi-hosting to load 731 the files from the host filesystem. 732 733config TARGET_VEXPRESS64_JUNO 734 bool "Support Versatile Express Juno Development Platform" 735 select ARM64 736 737config TARGET_LS2080A_EMU 738 bool "Support ls2080a_emu" 739 select ARCH_LS2080A 740 select ARM64 741 select ARMV8_MULTIENTRY 742 select ARCH_MISC_INIT 743 help 744 Support for Freescale LS2080A_EMU platform 745 The LS2080A Development System (EMULATOR) is a pre silicon 746 development platform that supports the QorIQ LS2080A 747 Layerscape Architecture processor. 748 749config TARGET_LS2080A_SIMU 750 bool "Support ls2080a_simu" 751 select ARCH_LS2080A 752 select ARM64 753 select ARMV8_MULTIENTRY 754 select ARCH_MISC_INIT 755 help 756 Support for Freescale LS2080A_SIMU platform 757 The LS2080A Development System (QDS) is a pre silicon 758 development platform that supports the QorIQ LS2080A 759 Layerscape Architecture processor. 760 761config TARGET_LS2080AQDS 762 bool "Support ls2080aqds" 763 select ARCH_LS2080A 764 select ARM64 765 select ARMV8_MULTIENTRY 766 select BOARD_LATE_INIT 767 select SUPPORT_SPL 768 select ARCH_MISC_INIT 769 help 770 Support for Freescale LS2080AQDS platform 771 The LS2080A Development System (QDS) is a high-performance 772 development platform that supports the QorIQ LS2080A 773 Layerscape Architecture processor. 774 775config TARGET_LS2080ARDB 776 bool "Support ls2080ardb" 777 select ARCH_LS2080A 778 select ARM64 779 select ARMV8_MULTIENTRY 780 select BOARD_LATE_INIT 781 select SUPPORT_SPL 782 select ARCH_MISC_INIT 783 help 784 Support for Freescale LS2080ARDB platform. 785 The LS2080A Reference design board (RDB) is a high-performance 786 development platform that supports the QorIQ LS2080A 787 Layerscape Architecture processor. 788 789config TARGET_HIKEY 790 bool "Support HiKey 96boards Consumer Edition Platform" 791 select ARM64 792 select DM 793 select DM_GPIO 794 select DM_SERIAL 795 select OF_CONTROL 796 help 797 Support for HiKey 96boards platform. It features a HI6220 798 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 799 800config TARGET_LS1012AQDS 801 bool "Support ls1012aqds" 802 select ARCH_LS1012A 803 select ARM64 804 select BOARD_LATE_INIT 805 help 806 Support for Freescale LS1012AQDS platform. 807 The LS1012A Development System (QDS) is a high-performance 808 development platform that supports the QorIQ LS1012A 809 Layerscape Architecture processor. 810 811config TARGET_LS1012ARDB 812 bool "Support ls1012ardb" 813 select ARCH_LS1012A 814 select ARM64 815 select BOARD_LATE_INIT 816 help 817 Support for Freescale LS1012ARDB platform. 818 The LS1012A Reference design board (RDB) is a high-performance 819 development platform that supports the QorIQ LS1012A 820 Layerscape Architecture processor. 821 822config TARGET_LS1012AFRDM 823 bool "Support ls1012afrdm" 824 select ARCH_LS1012A 825 select ARM64 826 help 827 Support for Freescale LS1012AFRDM platform. 828 The LS1012A Freedom board (FRDM) is a high-performance 829 development platform that supports the QorIQ LS1012A 830 Layerscape Architecture processor. 831 832config TARGET_LS1021AQDS 833 bool "Support ls1021aqds" 834 select BOARD_LATE_INIT 835 select CPU_V7 836 select CPU_V7_HAS_NONSEC 837 select CPU_V7_HAS_VIRT 838 select SUPPORT_SPL 839 select ARCH_LS1021A 840 select ARCH_SUPPORT_PSCI 841 select LS1_DEEP_SLEEP 842 select SYS_FSL_DDR 843 select BOARD_EARLY_INIT_F 844 845config TARGET_LS1021ATWR 846 bool "Support ls1021atwr" 847 select BOARD_LATE_INIT 848 select CPU_V7 849 select CPU_V7_HAS_NONSEC 850 select CPU_V7_HAS_VIRT 851 select SUPPORT_SPL 852 select ARCH_LS1021A 853 select ARCH_SUPPORT_PSCI 854 select LS1_DEEP_SLEEP 855 select BOARD_EARLY_INIT_F 856 857config TARGET_LS1021AIOT 858 bool "Support ls1021aiot" 859 select BOARD_LATE_INIT 860 select CPU_V7 861 select CPU_V7_HAS_NONSEC 862 select CPU_V7_HAS_VIRT 863 select SUPPORT_SPL 864 select ARCH_LS1021A 865 select ARCH_SUPPORT_PSCI 866 help 867 Support for Freescale LS1021AIOT platform. 868 The LS1021A Freescale board (IOT) is a high-performance 869 development platform that supports the QorIQ LS1021A 870 Layerscape Architecture processor. 871 872config TARGET_LS1043AQDS 873 bool "Support ls1043aqds" 874 select ARCH_LS1043A 875 select ARM64 876 select ARMV8_MULTIENTRY 877 select BOARD_LATE_INIT 878 select SUPPORT_SPL 879 select BOARD_EARLY_INIT_F 880 help 881 Support for Freescale LS1043AQDS platform. 882 883config TARGET_LS1043ARDB 884 bool "Support ls1043ardb" 885 select ARCH_LS1043A 886 select ARM64 887 select ARMV8_MULTIENTRY 888 select BOARD_LATE_INIT 889 select SUPPORT_SPL 890 select BOARD_EARLY_INIT_F 891 help 892 Support for Freescale LS1043ARDB platform. 893 894config TARGET_LS1046AQDS 895 bool "Support ls1046aqds" 896 select ARCH_LS1046A 897 select ARM64 898 select ARMV8_MULTIENTRY 899 select BOARD_LATE_INIT 900 select SUPPORT_SPL 901 select DM_SPI_FLASH if DM_SPI 902 select BOARD_EARLY_INIT_F 903 help 904 Support for Freescale LS1046AQDS platform. 905 The LS1046A Development System (QDS) is a high-performance 906 development platform that supports the QorIQ LS1046A 907 Layerscape Architecture processor. 908 909config TARGET_LS1046ARDB 910 bool "Support ls1046ardb" 911 select ARCH_LS1046A 912 select ARM64 913 select ARMV8_MULTIENTRY 914 select BOARD_LATE_INIT 915 select SUPPORT_SPL 916 select DM_SPI_FLASH if DM_SPI 917 select POWER_MC34VR500 918 select BOARD_EARLY_INIT_F 919 help 920 Support for Freescale LS1046ARDB platform. 921 The LS1046A Reference Design Board (RDB) is a high-performance 922 development platform that supports the QorIQ LS1046A 923 Layerscape Architecture processor. 924 925config TARGET_H2200 926 bool "Support h2200" 927 select CPU_PXA 928 929config TARGET_ZIPITZ2 930 bool "Support zipitz2" 931 select CPU_PXA 932 933config TARGET_COLIBRI_PXA270 934 bool "Support colibri_pxa270" 935 select CPU_PXA 936 937config ARCH_UNIPHIER 938 bool "Socionext UniPhier SoCs" 939 select BOARD_LATE_INIT 940 select CLK_UNIPHIER 941 select DM 942 select DM_GPIO 943 select DM_I2C 944 select DM_MMC 945 select DM_RESET 946 select DM_SERIAL 947 select DM_USB 948 select OF_CONTROL 949 select OF_LIBFDT 950 select PINCTRL 951 select SPL_BOARD_INIT if SPL 952 select SPL_DM if SPL 953 select SPL_LIBCOMMON_SUPPORT if SPL 954 select SPL_LIBGENERIC_SUPPORT if SPL 955 select SPL_OF_CONTROL if SPL 956 select SPL_PINCTRL if SPL 957 select SUPPORT_SPL 958 help 959 Support for UniPhier SoC family developed by Socionext Inc. 960 (formerly, System LSI Business Division of Panasonic Corporation) 961 962config STM32 963 bool "Support STM32" 964 select CPU_V7M 965 select DM 966 select DM_SERIAL 967 select SYS_THUMB_BUILD 968 969config ARCH_STI 970 bool "Support STMicrolectronics SoCs" 971 select CPU_V7 972 select DM 973 select DM_SERIAL 974 select BLK 975 select DM_MMC 976 select DM_RESET 977 help 978 Support for STMicroelectronics STiH407/10 SoC family. 979 This SoC is used on Linaro 96Board STiH410-B2260 980 981config ARCH_ROCKCHIP 982 bool "Support Rockchip SoCs" 983 select OF_CONTROL 984 select BLK 985 select DM 986 select SPL_DM if SPL 987 select SYS_MALLOC_F 988 select SYS_THUMB_BUILD if !ARM64 989 select SPL_SYS_MALLOC_SIMPLE if SPL 990 select DM_GPIO 991 select DM_I2C 992 select DM_MMC 993 select DM_MMC_OPS 994 select DM_SERIAL 995 select DM_SPI 996 select DM_SPI_FLASH 997 select DM_USB if USB 998 select DM_PWM 999 select DM_REGULATOR 1000 1001config TARGET_THUNDERX_88XX 1002 bool "Support ThunderX 88xx" 1003 select ARM64 1004 select OF_CONTROL 1005 select SYS_CACHE_SHIFT_7 1006 1007config ARCH_ASPEED 1008 bool "Support Aspeed SoCs" 1009 select OF_CONTROL 1010 select DM 1011 1012endchoice 1013 1014source "arch/arm/mach-aspeed/Kconfig" 1015 1016source "arch/arm/mach-at91/Kconfig" 1017 1018source "arch/arm/mach-bcm283x/Kconfig" 1019 1020source "arch/arm/mach-davinci/Kconfig" 1021 1022source "arch/arm/mach-exynos/Kconfig" 1023 1024source "arch/arm/mach-highbank/Kconfig" 1025 1026source "arch/arm/mach-integrator/Kconfig" 1027 1028source "arch/arm/mach-keystone/Kconfig" 1029 1030source "arch/arm/mach-kirkwood/Kconfig" 1031 1032source "arch/arm/mach-mvebu/Kconfig" 1033 1034source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1035 1036source "arch/arm/cpu/armv7/mx7ulp/Kconfig" 1037 1038source "arch/arm/cpu/armv7/mx7/Kconfig" 1039 1040source "arch/arm/cpu/armv7/mx6/Kconfig" 1041 1042source "arch/arm/cpu/armv7/mx5/Kconfig" 1043 1044source "arch/arm/mach-omap2/Kconfig" 1045 1046source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1047 1048source "arch/arm/mach-orion5x/Kconfig" 1049 1050source "arch/arm/mach-rmobile/Kconfig" 1051 1052source "arch/arm/mach-meson/Kconfig" 1053 1054source "arch/arm/mach-rockchip/Kconfig" 1055 1056source "arch/arm/mach-s5pc1xx/Kconfig" 1057 1058source "arch/arm/mach-snapdragon/Kconfig" 1059 1060source "arch/arm/mach-socfpga/Kconfig" 1061 1062source "arch/arm/mach-sti/Kconfig" 1063 1064source "arch/arm/mach-stm32/Kconfig" 1065 1066source "arch/arm/mach-sunxi/Kconfig" 1067 1068source "arch/arm/mach-tegra/Kconfig" 1069 1070source "arch/arm/mach-uniphier/Kconfig" 1071 1072source "arch/arm/cpu/armv7/vf610/Kconfig" 1073 1074source "arch/arm/mach-zynq/Kconfig" 1075 1076source "arch/arm/cpu/armv7/Kconfig" 1077 1078source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1079 1080source "arch/arm/cpu/armv8/Kconfig" 1081 1082source "arch/arm/imx-common/Kconfig" 1083 1084source "board/aries/m28evk/Kconfig" 1085source "board/bosch/shc/Kconfig" 1086source "board/CarMediaLab/flea3/Kconfig" 1087source "board/Marvell/aspenite/Kconfig" 1088source "board/Marvell/gplugd/Kconfig" 1089source "board/armadeus/apf27/Kconfig" 1090source "board/armltd/vexpress/Kconfig" 1091source "board/armltd/vexpress64/Kconfig" 1092source "board/bluegiga/apx4devkit/Kconfig" 1093source "board/broadcom/bcm23550_w1d/Kconfig" 1094source "board/broadcom/bcm28155_ap/Kconfig" 1095source "board/broadcom/bcmcygnus/Kconfig" 1096source "board/broadcom/bcmnsp/Kconfig" 1097source "board/broadcom/bcmns2/Kconfig" 1098source "board/cavium/thunderx/Kconfig" 1099source "board/cirrus/edb93xx/Kconfig" 1100source "board/creative/xfi3/Kconfig" 1101source "board/freescale/ls2080a/Kconfig" 1102source "board/freescale/ls2080aqds/Kconfig" 1103source "board/freescale/ls2080ardb/Kconfig" 1104source "board/freescale/ls1021aqds/Kconfig" 1105source "board/freescale/ls1043aqds/Kconfig" 1106source "board/freescale/ls1021atwr/Kconfig" 1107source "board/freescale/ls1021aiot/Kconfig" 1108source "board/freescale/ls1046aqds/Kconfig" 1109source "board/freescale/ls1043ardb/Kconfig" 1110source "board/freescale/ls1046ardb/Kconfig" 1111source "board/freescale/ls1012aqds/Kconfig" 1112source "board/freescale/ls1012ardb/Kconfig" 1113source "board/freescale/ls1012afrdm/Kconfig" 1114source "board/freescale/mx23evk/Kconfig" 1115source "board/freescale/mx25pdk/Kconfig" 1116source "board/freescale/mx28evk/Kconfig" 1117source "board/freescale/mx31ads/Kconfig" 1118source "board/freescale/mx31pdk/Kconfig" 1119source "board/freescale/mx35pdk/Kconfig" 1120source "board/freescale/s32v234evb/Kconfig" 1121source "board/gdsys/a38x/Kconfig" 1122source "board/grinn/chiliboard/Kconfig" 1123source "board/gumstix/pepper/Kconfig" 1124source "board/h2200/Kconfig" 1125source "board/hisilicon/hikey/Kconfig" 1126source "board/imx31_phycore/Kconfig" 1127source "board/isee/igep003x/Kconfig" 1128source "board/olimex/mx23_olinuxino/Kconfig" 1129source "board/phytec/pcm051/Kconfig" 1130source "board/ppcag/bg0900/Kconfig" 1131source "board/sandisk/sansa_fuze_plus/Kconfig" 1132source "board/schulercontrol/sc_sps_1/Kconfig" 1133source "board/silica/pengwyn/Kconfig" 1134source "board/spear/spear300/Kconfig" 1135source "board/spear/spear310/Kconfig" 1136source "board/spear/spear320/Kconfig" 1137source "board/spear/spear600/Kconfig" 1138source "board/spear/x600/Kconfig" 1139source "board/st/stv0991/Kconfig" 1140source "board/syteco/zmx25/Kconfig" 1141source "board/tcl/sl50/Kconfig" 1142source "board/birdland/bav335x/Kconfig" 1143source "board/timll/devkit3250/Kconfig" 1144source "board/toradex/colibri_pxa270/Kconfig" 1145source "board/technologic/ts4600/Kconfig" 1146source "board/vscom/baltos/Kconfig" 1147source "board/woodburn/Kconfig" 1148source "board/work-microwave/work_92105/Kconfig" 1149source "board/zipitz2/Kconfig" 1150 1151source "arch/arm/Kconfig.debug" 1152 1153endmenu 1154