xref: /openbmc/u-boot/arch/arm/Kconfig (revision e7ab6dfc)
1menu "ARM architecture"
2	depends on ARM
3
4config SYS_ARCH
5	default "arm"
6
7config ARM64
8	bool
9	select PHYS_64BIT
10	select SYS_CACHE_SHIFT_6
11
12if ARM64
13config POSITION_INDEPENDENT
14	bool "Generate position-independent pre-relocation code"
15	help
16	  U-Boot expects to be linked to a specific hard-coded address, and to
17	  be loaded to and run from that address. This option lifts that
18	  restriction, thus allowing the code to be loaded to and executed
19	  from almost any address. This logic relies on the relocation
20	  information that is embedded into the binary to support U-Boot
21	  relocating itself to the top-of-RAM later during execution.
22
23config SYS_INIT_SP_BSS_OFFSET
24	int
25	help
26	  U-Boot typically uses a hard-coded value for the stack pointer
27	  before relocation. Define this option to instead calculate the
28	  initial SP at run-time. This is useful to avoid hard-coding addresses
29	  into U-Boot, so that can be loaded and executed at arbitrary
30	  addresses and thus avoid using arbitrary addresses at runtime. This
31	  option's value is the offset added to &_bss_start in order to
32	  calculate the stack pointer. This offset should be large enough so
33	  that the early malloc region, global data (gd), and early stack usage
34	  do not overlap any appended DTB.
35
36config LINUX_KERNEL_IMAGE_HEADER
37	bool
38	help
39	  Place a Linux kernel image header at the start of the U-Boot binary.
40	  The format of the header is described in the Linux kernel source at
41	  Documentation/arm64/booting.txt. This feature is useful since the
42	  image header reports the amount of memory (BSS and similar) that
43	  U-Boot needs to use, but which isn't part of the binary.
44
45if LINUX_KERNEL_IMAGE_HEADER
46config LNX_KRNL_IMG_TEXT_OFFSET_BASE
47	hex
48	help
49	  The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50	  TEXT_OFFSET value written in to the Linux kernel image header.
51endif
52endif
53
54config STATIC_RELA
55	bool
56	default y if ARM64 && !POSITION_INDEPENDENT
57
58config DMA_ADDR_T_64BIT
59	bool
60	default y if ARM64
61
62config HAS_VBAR
63	bool
64
65config HAS_THUMB2
66	bool
67
68# Used for compatibility with asm files copied from the kernel
69config ARM_ASM_UNIFIED
70	bool
71	default y
72
73# Used for compatibility with asm files copied from the kernel
74config THUMB2_KERNEL
75	bool
76
77config SYS_ARM_CACHE_CP15
78	bool "CP15 based cache enabling support"
79	help
80	  Select this if your processor suports enabling caches by using
81	  CP15 registers.
82
83config SYS_ARM_MMU
84	bool "MMU-based Paged Memory Management Support"
85	select SYS_ARM_CACHE_CP15
86	help
87	  Select if you want MMU-based virtualised addressing space
88	  support by paged memory management.
89
90config SYS_ARM_MPU
91	bool 'Use the ARM v7 PMSA Compliant MPU'
92	help
93	  Some ARM systems without an MMU have instead a Memory Protection
94	  Unit (MPU) that defines the type and permissions for regions of
95	  memory.
96	  If your CPU has an MPU then you should choose 'y' here unless you
97	  know that you do not want to use the MPU.
98
99# If set, the workarounds for these ARM errata are applied early during U-Boot
100# startup. Note that in general these options force the workarounds to be
101# applied; no CPU-type/version detection exists, unlike the similar options in
102# the Linux kernel. Do not set these options unless they apply!  Also note that
103# the following can be machine specific errata. These do have ability to
104# provide rudimentary version and machine specific checks, but expect no
105# product checks:
106# CONFIG_ARM_ERRATA_430973
107# CONFIG_ARM_ERRATA_454179
108# CONFIG_ARM_ERRATA_621766
109# CONFIG_ARM_ERRATA_798870
110# CONFIG_ARM_ERRATA_801819
111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
113
114config ARM_ERRATA_430973
115	bool
116
117config ARM_ERRATA_454179
118	bool
119
120config ARM_ERRATA_621766
121	bool
122
123config ARM_ERRATA_716044
124	bool
125
126config ARM_ERRATA_725233
127	bool
128
129config ARM_ERRATA_742230
130	bool
131
132config ARM_ERRATA_743622
133	bool
134
135config ARM_ERRATA_751472
136	bool
137
138config ARM_ERRATA_761320
139	bool
140
141config ARM_ERRATA_773022
142	bool
143
144config ARM_ERRATA_774769
145	bool
146
147config ARM_ERRATA_794072
148	bool
149
150config ARM_ERRATA_798870
151	bool
152
153config ARM_ERRATA_801819
154	bool
155
156config ARM_ERRATA_826974
157	bool
158
159config ARM_ERRATA_828024
160	bool
161
162config ARM_ERRATA_829520
163	bool
164
165config ARM_ERRATA_833069
166	bool
167
168config ARM_ERRATA_833471
169	bool
170
171config ARM_ERRATA_845369
172	bool
173
174config ARM_ERRATA_852421
175	bool
176
177config ARM_ERRATA_852423
178	bool
179
180config ARM_ERRATA_855873
181	bool
182
183config ARM_CORTEX_A8_CVE_2017_5715
184	bool
185
186config ARM_CORTEX_A15_CVE_2017_5715
187	bool
188
189config CPU_ARM720T
190	bool
191	select SYS_CACHE_SHIFT_5
192	imply SYS_ARM_MMU
193
194config CPU_ARM920T
195	bool
196	select SYS_CACHE_SHIFT_5
197	imply SYS_ARM_MMU
198
199config CPU_ARM926EJS
200	bool
201	select SYS_CACHE_SHIFT_5
202	imply SYS_ARM_MMU
203
204config CPU_ARM946ES
205	bool
206	select SYS_CACHE_SHIFT_5
207	imply SYS_ARM_MMU
208
209config CPU_ARM1136
210	bool
211	select SYS_CACHE_SHIFT_5
212	imply SYS_ARM_MMU
213
214config CPU_ARM1176
215	bool
216	select HAS_VBAR
217	select SYS_CACHE_SHIFT_5
218	imply SYS_ARM_MMU
219
220config CPU_V7A
221	bool
222	select HAS_THUMB2
223	select HAS_VBAR
224	select SYS_CACHE_SHIFT_6
225	imply SYS_ARM_MMU
226
227config CPU_V7M
228	bool
229	select HAS_THUMB2
230	select SYS_ARM_MPU
231	select SYS_CACHE_SHIFT_5
232	select SYS_THUMB_BUILD
233	select THUMB2_KERNEL
234
235config CPU_V7R
236	bool
237	select HAS_THUMB2
238	select SYS_ARM_CACHE_CP15
239	select SYS_ARM_MPU
240	select SYS_CACHE_SHIFT_6
241
242config CPU_PXA
243	bool
244	select SYS_CACHE_SHIFT_5
245	imply SYS_ARM_MMU
246
247config CPU_SA1100
248	bool
249	select SYS_CACHE_SHIFT_5
250	imply SYS_ARM_MMU
251
252config SYS_CPU
253	default "arm720t" if CPU_ARM720T
254	default "arm920t" if CPU_ARM920T
255	default "arm926ejs" if CPU_ARM926EJS
256	default "arm946es" if CPU_ARM946ES
257	default "arm1136" if CPU_ARM1136
258	default "arm1176" if CPU_ARM1176
259	default "armv7" if CPU_V7A
260	default "armv7" if CPU_V7R
261	default "armv7m" if CPU_V7M
262	default "pxa" if CPU_PXA
263	default "sa1100" if CPU_SA1100
264	default "armv8" if ARM64
265
266config SYS_ARM_ARCH
267	int
268	default 4 if CPU_ARM720T
269	default 4 if CPU_ARM920T
270	default 5 if CPU_ARM926EJS
271	default 5 if CPU_ARM946ES
272	default 6 if CPU_ARM1136
273	default 6 if CPU_ARM1176
274	default 7 if CPU_V7A
275	default 7 if CPU_V7M
276	default 7 if CPU_V7R
277	default 5 if CPU_PXA
278	default 4 if CPU_SA1100
279	default 8 if ARM64
280
281config SYS_CACHE_SHIFT_5
282	bool
283
284config SYS_CACHE_SHIFT_6
285	bool
286
287config SYS_CACHE_SHIFT_7
288	bool
289
290config SYS_CACHELINE_SIZE
291	int
292	default 128 if SYS_CACHE_SHIFT_7
293	default 64 if SYS_CACHE_SHIFT_6
294	default 32 if SYS_CACHE_SHIFT_5
295
296config SYS_ARCH_TIMER
297	bool "ARM Generic Timer support"
298	depends on CPU_V7A || ARM64
299	default y if ARM64
300	help
301	  The ARM Generic Timer (aka arch-timer) provides an architected
302	  interface to a timer source on an SoC.
303	  It is mandantory for ARMv8 implementation and widely available
304	  on ARMv7 systems.
305
306config ARM_SMCCC
307	bool "Support for ARM SMC Calling Convention (SMCCC)"
308	depends on CPU_V7A || ARM64
309	select ARM_PSCI_FW
310	help
311	  Say Y here if you want to enable ARM SMC Calling Convention.
312	  This should be enabled if U-Boot needs to communicate with system
313	  firmware (for example, PSCI) according to SMCCC.
314
315config SEMIHOSTING
316	bool "support boot from semihosting"
317	help
318	  In emulated environments, semihosting is a way for
319	  the hosted environment to call out to the emulator to
320	  retrieve files from the host machine.
321
322config SYS_THUMB_BUILD
323	bool "Build U-Boot using the Thumb instruction set"
324	depends on !ARM64
325	help
326	   Use this flag to build U-Boot using the Thumb instruction set for
327	   ARM architectures. Thumb instruction set provides better code
328	   density. For ARM architectures that support Thumb2 this flag will
329	   result in Thumb2 code generated by GCC.
330
331config SPL_SYS_THUMB_BUILD
332	bool "Build SPL using the Thumb instruction set"
333	default y if SYS_THUMB_BUILD
334	depends on !ARM64
335	help
336	   Use this flag to build SPL using the Thumb instruction set for
337	   ARM architectures. Thumb instruction set provides better code
338	   density. For ARM architectures that support Thumb2 this flag will
339	   result in Thumb2 code generated by GCC.
340
341config SYS_L2CACHE_OFF
342	bool "L2cache off"
343	help
344	  If SoC does not support L2CACHE or one do not want to enable
345	  L2CACHE, choose this option.
346
347config ENABLE_ARM_SOC_BOOT0_HOOK
348	bool "prepare BOOT0 header"
349	help
350	  If the SoC's BOOT0 requires a header area filled with (magic)
351	  values, then choose this option, and create a file included as
352	  <asm/arch/boot0.h> which contains the required assembler code.
353
354config ARM_CORTEX_CPU_IS_UP
355	bool
356	default n
357
358config USE_ARCH_MEMCPY
359	bool "Use an assembly optimized implementation of memcpy"
360	default y
361	depends on !ARM64
362	help
363	  Enable the generation of an optimized version of memcpy.
364	  Such implementation may be faster under some conditions
365	  but may increase the binary size.
366
367config SPL_USE_ARCH_MEMCPY
368	bool "Use an assembly optimized implementation of memcpy for SPL"
369	default y if USE_ARCH_MEMCPY
370	depends on !ARM64
371	help
372	  Enable the generation of an optimized version of memcpy.
373	  Such implementation may be faster under some conditions
374	  but may increase the binary size.
375
376config USE_ARCH_MEMSET
377	bool "Use an assembly optimized implementation of memset"
378	default y
379	depends on !ARM64
380	help
381	  Enable the generation of an optimized version of memset.
382	  Such implementation may be faster under some conditions
383	  but may increase the binary size.
384
385config SPL_USE_ARCH_MEMSET
386	bool "Use an assembly optimized implementation of memset for SPL"
387	default y if USE_ARCH_MEMSET
388	depends on !ARM64
389	help
390	  Enable the generation of an optimized version of memset.
391	  Such implementation may be faster under some conditions
392	  but may increase the binary size.
393
394config ARM64_SUPPORT_AARCH32
395	bool "ARM64 system support AArch32 execution state"
396	default y if ARM64 && !TARGET_THUNDERX_88XX
397	help
398	  This ARM64 system supports AArch32 execution state.
399
400choice
401	prompt "Target select"
402	default TARGET_HIKEY
403
404config ARCH_AT91
405	bool "Atmel AT91"
406	select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
407
408config TARGET_EDB93XX
409	bool "Support edb93xx"
410	select CPU_ARM920T
411	select PL010_SERIAL
412
413config TARGET_ASPENITE
414	bool "Support aspenite"
415	select CPU_ARM926EJS
416
417config TARGET_GPLUGD
418	bool "Support gplugd"
419	select CPU_ARM926EJS
420
421config ARCH_DAVINCI
422	bool "TI DaVinci"
423	select CPU_ARM926EJS
424	imply CMD_SAVES
425	help
426	  Support for TI's DaVinci platform.
427
428config KIRKWOOD
429	bool "Marvell Kirkwood"
430	select ARCH_MISC_INIT
431	select BOARD_EARLY_INIT_F
432	select CPU_ARM926EJS
433
434config ARCH_MVEBU
435	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
436	select DM
437	select DM_ETH
438	select DM_SERIAL
439	select DM_SPI
440	select DM_SPI_FLASH
441	select OF_CONTROL
442	select OF_SEPARATE
443	select SPI
444	imply CMD_DM
445
446config TARGET_APF27
447	bool "Support apf27"
448	select CPU_ARM926EJS
449	select SUPPORT_SPL
450
451config ORION5X
452	bool "Marvell Orion"
453	select CPU_ARM926EJS
454
455config TARGET_SPEAR300
456	bool "Support spear300"
457	select BOARD_EARLY_INIT_F
458	select CPU_ARM926EJS
459	select PL011_SERIAL
460	imply CMD_SAVES
461
462config TARGET_SPEAR310
463	bool "Support spear310"
464	select BOARD_EARLY_INIT_F
465	select CPU_ARM926EJS
466	select PL011_SERIAL
467	imply CMD_SAVES
468
469config TARGET_SPEAR320
470	bool "Support spear320"
471	select BOARD_EARLY_INIT_F
472	select CPU_ARM926EJS
473	select PL011_SERIAL
474	imply CMD_SAVES
475
476config TARGET_SPEAR600
477	bool "Support spear600"
478	select BOARD_EARLY_INIT_F
479	select CPU_ARM926EJS
480	select PL011_SERIAL
481	imply CMD_SAVES
482
483config TARGET_STV0991
484	bool "Support stv0991"
485	select CPU_V7A
486	select DM
487	select DM_SERIAL
488	select DM_SPI
489	select DM_SPI_FLASH
490	select PL01X_SERIAL
491	select SPI
492	select SPI_FLASH
493	imply CMD_DM
494
495config TARGET_X600
496	bool "Support x600"
497	select BOARD_LATE_INIT
498	select CPU_ARM926EJS
499	select PL011_SERIAL
500	select SUPPORT_SPL
501
502config TARGET_WOODBURN
503	bool "Support woodburn"
504	select CPU_ARM1136
505
506config TARGET_WOODBURN_SD
507	bool "Support woodburn_sd"
508	select CPU_ARM1136
509	select SUPPORT_SPL
510
511config TARGET_FLEA3
512	bool "Support flea3"
513	select CPU_ARM1136
514
515config TARGET_MX35PDK
516	bool "Support mx35pdk"
517	select BOARD_LATE_INIT
518	select CPU_ARM1136
519
520config ARCH_BCM283X
521	bool "Broadcom BCM283X family"
522	select DM
523	select DM_GPIO
524	select DM_SERIAL
525	select OF_CONTROL
526	select PL01X_SERIAL
527	select SERIAL_SEARCH_ALL
528	imply CMD_DM
529	imply FAT_WRITE
530
531config ARCH_BCM6858
532	bool "Broadcom BCM6858 family"
533	select DM
534	select OF_CONTROL
535	imply CMD_DM
536
537config TARGET_VEXPRESS_CA15_TC2
538	bool "Support vexpress_ca15_tc2"
539	select CPU_V7A
540	select CPU_V7_HAS_NONSEC
541	select CPU_V7_HAS_VIRT
542	select PL011_SERIAL
543
544config ARCH_BCMSTB
545	bool "Broadcom BCM7XXX family"
546	select CPU_V7A
547	select DM
548	select OF_CONTROL
549	select OF_PRIOR_STAGE
550	imply CMD_DM
551	help
552	  This enables support for Broadcom ARM-based set-top box
553	  chipsets, including the 7445 family of chips.
554
555config TARGET_VEXPRESS_CA5X2
556	bool "Support vexpress_ca5x2"
557	select CPU_V7A
558	select PL011_SERIAL
559
560config TARGET_VEXPRESS_CA9X4
561	bool "Support vexpress_ca9x4"
562	select CPU_V7A
563	select PL011_SERIAL
564
565config TARGET_BCM23550_W1D
566	bool "Support bcm23550_w1d"
567	select CPU_V7A
568	imply CRC32_VERIFY
569	imply FAT_WRITE
570
571config TARGET_BCM28155_AP
572	bool "Support bcm28155_ap"
573	select CPU_V7A
574	imply CRC32_VERIFY
575	imply FAT_WRITE
576
577config TARGET_BCMCYGNUS
578	bool "Support bcmcygnus"
579	select CPU_V7A
580	imply BCM_SF2_ETH
581	imply BCM_SF2_ETH_GMAC
582	imply CMD_HASH
583	imply CRC32_VERIFY
584	imply FAT_WRITE
585	imply HASH_VERIFY
586	imply NETDEVICES
587
588config TARGET_BCMNSP
589	bool "Support bcmnsp"
590	select CPU_V7A
591
592config TARGET_BCMNS2
593	bool "Support Broadcom Northstar2"
594	select ARM64
595	help
596	  Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
597	  ARMv8 Cortex-A57 processors targeting a broad range of networking
598	  applications
599
600config ARCH_EXYNOS
601	bool "Samsung EXYNOS"
602	select DM
603	select DM_GPIO
604	select DM_I2C
605	select DM_KEYBOARD
606	select DM_SERIAL
607	select DM_SPI
608	select DM_SPI_FLASH
609	select SPI
610	imply SYS_THUMB_BUILD
611	imply CMD_DM
612	imply FAT_WRITE
613
614config ARCH_S5PC1XX
615	bool "Samsung S5PC1XX"
616	select CPU_V7A
617	select DM
618	select DM_GPIO
619	select DM_I2C
620	select DM_SERIAL
621	imply CMD_DM
622
623config ARCH_HIGHBANK
624	bool "Calxeda Highbank"
625	select CPU_V7A
626	select PL011_SERIAL
627
628config ARCH_INTEGRATOR
629	bool "ARM Ltd. Integrator family"
630	select DM
631	select DM_SERIAL
632	select PL01X_SERIAL
633	imply CMD_DM
634
635config ARCH_KEYSTONE
636	bool "TI Keystone"
637	select CMD_POWEROFF
638	select CPU_V7A
639	select SUPPORT_SPL
640	select SYS_ARCH_TIMER
641	select SYS_THUMB_BUILD
642	imply CMD_MTDPARTS
643	imply CMD_SAVES
644	imply FIT
645
646config ARCH_K3
647	bool "Texas Instruments' K3 Architecture"
648	select SPL
649	select SUPPORT_SPL
650	select FIT
651
652config ARCH_OMAP2PLUS
653	bool "TI OMAP2+"
654	select CPU_V7A
655	select SPL_BOARD_INIT if SPL
656	select SPL_STACK_R if SPL
657	select SUPPORT_SPL
658	imply FIT
659
660config ARCH_MESON
661	bool "Amlogic Meson"
662	imply DISTRO_DEFAULTS
663	help
664	  Support for the Meson SoC family developed by Amlogic Inc.,
665	  targeted at media players and tablet computers. We currently
666	  support the S905 (GXBaby) 64-bit SoC.
667
668config ARCH_MEDIATEK
669	bool "MediaTek SoCs"
670	select BINMAN
671	select DM
672	select OF_CONTROL
673	select SPL_DM if SPL
674	select SPL_LIBCOMMON_SUPPORT if SPL
675	select SPL_LIBGENERIC_SUPPORT if SPL
676	select SPL_OF_CONTROL if SPL
677	select SUPPORT_SPL
678	help
679	  Support for the MediaTek SoCs family developed by MediaTek Inc.
680	  Please refer to doc/README.mediatek for more information.
681
682config ARCH_LPC32XX
683	bool "NXP LPC32xx platform"
684	select CPU_ARM926EJS
685	select DM
686	select DM_GPIO
687	select DM_SERIAL
688	select SPL_DM if SPL
689	select SUPPORT_SPL
690	imply CMD_DM
691
692config ARCH_IMX8
693	bool "NXP i.MX8 platform"
694	select ARM64
695	select DM
696	select OF_CONTROL
697
698config ARCH_IMX8M
699	bool "NXP i.MX8M platform"
700	select ARM64
701	select DM
702	select SUPPORT_SPL
703	imply CMD_DM
704
705config ARCH_MX23
706	bool "NXP i.MX23 family"
707	select CPU_ARM926EJS
708	select PL011_SERIAL
709	select SUPPORT_SPL
710
711config ARCH_MX25
712	bool "NXP MX25"
713	select CPU_ARM926EJS
714	imply MXC_GPIO
715
716config ARCH_MX28
717	bool "NXP i.MX28 family"
718	select CPU_ARM926EJS
719	select PL011_SERIAL
720	select SUPPORT_SPL
721
722config ARCH_MX31
723	bool "NXP i.MX31 family"
724	select CPU_ARM1136
725
726config ARCH_MX7ULP
727	bool "NXP MX7ULP"
728	select CPU_V7A
729	select ROM_UNIFIED_SECTIONS
730	imply MXC_GPIO
731
732config ARCH_MX7
733	bool "Freescale MX7"
734	select ARCH_MISC_INIT
735	select BOARD_EARLY_INIT_F
736	select CPU_V7A
737	select SYS_FSL_HAS_SEC if SECURE_BOOT
738	select SYS_FSL_SEC_COMPAT_4
739	select SYS_FSL_SEC_LE
740	imply MXC_GPIO
741
742config ARCH_MX6
743	bool "Freescale MX6"
744	select CPU_V7A
745	select SYS_FSL_HAS_SEC if SECURE_BOOT
746	select SYS_FSL_SEC_COMPAT_4
747	select SYS_FSL_SEC_LE
748	select SYS_THUMB_BUILD if SPL
749	imply MXC_GPIO
750
751if ARCH_MX6
752config SPL_LDSCRIPT
753	default "arch/arm/mach-omap2/u-boot-spl.lds"
754endif
755
756config ARCH_MX5
757	bool "Freescale MX5"
758	select BOARD_EARLY_INIT_F
759	select CPU_V7A
760	imply MXC_GPIO
761
762config ARCH_OWL
763	bool "Actions Semi OWL SoCs"
764	select ARM64
765	select DM
766	select DM_SERIAL
767	select OF_CONTROL
768	imply CMD_DM
769
770config ARCH_QEMU
771	bool "QEMU Virtual Platform"
772	select DM
773	select DM_SERIAL
774	select OF_CONTROL
775	select PL01X_SERIAL
776	imply CMD_DM
777	imply DM_RTC
778	imply RTC_PL031
779
780config ARCH_RMOBILE
781	bool "Renesas ARM SoCs"
782	select BOARD_EARLY_INIT_F
783	select DM
784	select DM_SERIAL
785	imply CMD_DM
786	imply FAT_WRITE
787	imply SYS_THUMB_BUILD
788	imply ARCH_MISC_INIT if DISPLAY_CPUINFO
789
790config TARGET_S32V234EVB
791	bool "Support s32v234evb"
792	select ARM64
793	select SYS_FSL_ERRATUM_ESDHC111
794
795config ARCH_SNAPDRAGON
796	bool "Qualcomm Snapdragon SoCs"
797	select ARM64
798	select DM
799	select DM_GPIO
800	select DM_SERIAL
801	select MSM_SMEM
802	select OF_CONTROL
803	select OF_SEPARATE
804	select SMEM
805	select SPMI
806	imply CMD_DM
807
808config ARCH_SOCFPGA
809	bool "Altera SOCFPGA family"
810	select ARCH_EARLY_INIT_R
811	select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
812	select ARM64 if TARGET_SOCFPGA_STRATIX10
813	select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
814	select DM
815	select DM_SERIAL
816	select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
817	select OF_CONTROL
818	select SPL_DM_RESET if DM_RESET
819	select SPL_DM_SERIAL
820	select SPL_LIBCOMMON_SUPPORT
821	select SPL_LIBGENERIC_SUPPORT
822	select SPL_NAND_SUPPORT if SPL_NAND_DENALI
823	select SPL_OF_CONTROL
824	select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
825	select SPL_SERIAL_SUPPORT
826	select SPL_WATCHDOG_SUPPORT
827	select SUPPORT_SPL
828	select SYS_NS16550
829	select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
830	imply CMD_DM
831	imply CMD_MTDPARTS
832	imply CRC32_VERIFY
833	imply DM_SPI
834	imply DM_SPI_FLASH
835	imply FAT_WRITE
836	imply SPL_LIBDISK_SUPPORT
837	imply SPL_MMC_SUPPORT
838	imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
839	imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
840	imply SPL_SPI_FLASH_SUPPORT
841	imply SPL_SPI_SUPPORT
842
843config ARCH_SUNXI
844	bool "Support sunxi (Allwinner) SoCs"
845	select BINMAN
846	select CMD_GPIO
847	select CMD_MMC if MMC
848	select CMD_USB if DISTRO_DEFAULTS
849	select DM
850	select DM_ETH
851	select DM_GPIO
852	select DM_KEYBOARD
853	select DM_SERIAL
854	select DM_USB if DISTRO_DEFAULTS
855	select OF_BOARD_SETUP
856	select OF_CONTROL
857	select OF_SEPARATE
858	select SPECIFY_CONSOLE_INDEX
859	select SPL_STACK_R if SPL
860	select SPL_SYS_MALLOC_SIMPLE if SPL
861	select SPL_SYS_THUMB_BUILD if !ARM64
862	select SYS_NS16550
863	select SYS_THUMB_BUILD if !ARM64
864	select USB if DISTRO_DEFAULTS
865	select USB_KEYBOARD if DISTRO_DEFAULTS
866	select USB_STORAGE if DISTRO_DEFAULTS
867	select USE_TINY_PRINTF
868	imply CMD_DM
869	imply CMD_GPT
870	imply CMD_UBI if NAND
871	imply DISTRO_DEFAULTS
872	imply FAT_WRITE
873	imply FIT
874	imply OF_LIBFDT_OVERLAY
875	imply PRE_CONSOLE_BUFFER
876	imply SPL_GPIO_SUPPORT
877	imply SPL_LIBCOMMON_SUPPORT
878	imply SPL_LIBGENERIC_SUPPORT
879	imply SPL_MMC_SUPPORT if MMC
880	imply SPL_POWER_SUPPORT
881	imply SPL_SERIAL_SUPPORT
882	imply USB_GADGET
883
884config ARCH_VERSAL
885	bool "Support Xilinx Versal Platform"
886	select ARM64
887	select CLK
888	select DM
889	select DM_SERIAL
890	select OF_CONTROL
891
892config ARCH_VF610
893	bool "Freescale Vybrid"
894	select CPU_V7A
895	select SYS_FSL_ERRATUM_ESDHC111
896	imply CMD_MTDPARTS
897	imply NAND
898
899config ARCH_ZYNQ
900	bool "Xilinx Zynq based platform"
901	select BOARD_EARLY_INIT_F if WDT
902	select CLK
903	select CLK_ZYNQ
904	select CPU_V7A
905	select DM
906	select DM_ETH if NET
907	select DM_MMC if MMC
908	select DM_SERIAL
909	select DM_SPI
910	select DM_SPI_FLASH
911	select DM_USB if USB
912	select OF_CONTROL
913	select SPI
914	select SPL_BOARD_INIT if SPL
915	select SPL_CLK if SPL
916	select SPL_DM if SPL
917	select SPL_OF_CONTROL if SPL
918	select SPL_SEPARATE_BSS if SPL
919	select SUPPORT_SPL
920	imply ARCH_EARLY_INIT_R
921	imply BOARD_LATE_INIT
922	imply CMD_CLK
923	imply CMD_DM
924	imply CMD_SPL
925	imply FAT_WRITE
926
927config ARCH_ZYNQMP_R5
928	bool "Xilinx ZynqMP R5 based platform"
929	select CLK
930	select CPU_V7R
931	select DM
932	select DM_SERIAL
933	select OF_CONTROL
934	imply CMD_DM
935	imply DM_USB_GADGET
936
937config ARCH_ZYNQMP
938	bool "Xilinx ZynqMP based platform"
939	select ARM64
940	select CLK
941	select DM
942	select DM_SERIAL
943	select DM_USB if USB
944	select OF_CONTROL
945	select SPL_BOARD_INIT if SPL
946	select SPL_CLK if SPL
947	select SPL_SEPARATE_BSS if SPL
948	select SUPPORT_SPL
949	imply BOARD_LATE_INIT
950	imply CMD_DM
951	imply FAT_WRITE
952	imply MP
953	imply DM_USB_GADGET
954
955config TEGRA
956	bool "NVIDIA Tegra"
957	imply DISTRO_DEFAULTS
958	imply FAT_WRITE
959
960config TARGET_VEXPRESS64_AEMV8A
961	bool "Support vexpress_aemv8a"
962	select ARM64
963	select PL01X_SERIAL
964
965config TARGET_VEXPRESS64_BASE_FVP
966	bool "Support Versatile Express ARMv8a FVP BASE model"
967	select ARM64
968	select PL01X_SERIAL
969	select SEMIHOSTING
970
971config TARGET_VEXPRESS64_BASE_FVP_DRAM
972	bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
973	select ARM64
974	select PL01X_SERIAL
975	help
976	  This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
977	  the default config to allow the user to load the images directly into
978	  DRAM using model parameters rather than by using semi-hosting to load
979	  the files from the host filesystem.
980
981config TARGET_VEXPRESS64_JUNO
982	bool "Support Versatile Express Juno Development Platform"
983	select ARM64
984	select PL01X_SERIAL
985
986config TARGET_LS2080A_EMU
987	bool "Support ls2080a_emu"
988	select ARCH_LS2080A
989	select ARCH_MISC_INIT
990	select ARM64
991	select ARMV8_MULTIENTRY
992	help
993	  Support for Freescale LS2080A_EMU platform
994	  The LS2080A Development System (EMULATOR) is a pre silicon
995	  development platform that supports the QorIQ LS2080A
996	  Layerscape Architecture processor.
997
998config TARGET_LS2080A_SIMU
999	bool "Support ls2080a_simu"
1000	select ARCH_LS2080A
1001	select ARCH_MISC_INIT
1002	select ARM64
1003	select ARMV8_MULTIENTRY
1004	help
1005	  Support for Freescale LS2080A_SIMU platform
1006	  The LS2080A Development System (QDS) is a pre silicon
1007	  development platform that supports the QorIQ LS2080A
1008	  Layerscape Architecture processor.
1009
1010config TARGET_LS1088AQDS
1011	bool "Support ls1088aqds"
1012	select ARCH_LS1088A
1013	select ARCH_MISC_INIT
1014	select ARM64
1015	select ARMV8_MULTIENTRY
1016	select BOARD_LATE_INIT
1017	select SUPPORT_SPL
1018	help
1019	  Support for NXP LS1088AQDS platform
1020	  The LS1088A Development System (QDS) is a high-performance
1021	  development platform that supports the QorIQ LS1088A
1022	  Layerscape Architecture processor.
1023
1024config TARGET_LS2080AQDS
1025	bool "Support ls2080aqds"
1026	select ARCH_LS2080A
1027	select ARCH_MISC_INIT
1028	select ARM64
1029	select ARMV8_MULTIENTRY
1030	select BOARD_LATE_INIT
1031	select SUPPORT_SPL
1032	imply SCSI
1033	imply SCSI_AHCI
1034	help
1035	  Support for Freescale LS2080AQDS platform
1036	  The LS2080A Development System (QDS) is a high-performance
1037	  development platform that supports the QorIQ LS2080A
1038	  Layerscape Architecture processor.
1039
1040config TARGET_LS2080ARDB
1041	bool "Support ls2080ardb"
1042	select ARCH_LS2080A
1043	select ARCH_MISC_INIT
1044	select ARM64
1045	select ARMV8_MULTIENTRY
1046	select BOARD_LATE_INIT
1047	select SUPPORT_SPL
1048	imply SCSI
1049	imply SCSI_AHCI
1050	help
1051	  Support for Freescale LS2080ARDB platform.
1052	  The LS2080A Reference design board (RDB) is a high-performance
1053	  development platform that supports the QorIQ LS2080A
1054	  Layerscape Architecture processor.
1055
1056config TARGET_LS2081ARDB
1057	bool "Support ls2081ardb"
1058	select ARCH_LS2080A
1059	select ARCH_MISC_INIT
1060	select ARM64
1061	select ARMV8_MULTIENTRY
1062	select BOARD_LATE_INIT
1063	select SUPPORT_SPL
1064	help
1065	  Support for Freescale LS2081ARDB platform.
1066	  The LS2081A Reference design board (RDB) is a high-performance
1067	  development platform that supports the QorIQ LS2081A/LS2041A
1068	  Layerscape Architecture processor.
1069
1070config TARGET_HIKEY
1071	bool "Support HiKey 96boards Consumer Edition Platform"
1072	select ARM64
1073	select DM
1074	select DM_GPIO
1075	select DM_SERIAL
1076	select OF_CONTROL
1077	select PL01X_SERIAL
1078	select SPECIFY_CONSOLE_INDEX
1079	imply CMD_DM
1080	  help
1081	  Support for HiKey 96boards platform. It features a HI6220
1082	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
1083
1084config TARGET_POPLAR
1085	bool "Support Poplar 96boards Enterprise Edition Platform"
1086	select ARM64
1087	select DM
1088	select DM_SERIAL
1089	select DM_USB
1090	select OF_CONTROL
1091	select PL01X_SERIAL
1092	imply CMD_DM
1093	  help
1094	  Support for Poplar 96boards EE platform. It features a HI3798cv200
1095	  SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
1096	  making it capable of running any commercial set-top solution based on
1097	  Linux or Android.
1098
1099config TARGET_LS1012AQDS
1100	bool "Support ls1012aqds"
1101	select ARCH_LS1012A
1102	select ARM64
1103	select BOARD_LATE_INIT
1104	help
1105	  Support for Freescale LS1012AQDS platform.
1106	  The LS1012A Development System (QDS) is a high-performance
1107	  development platform that supports the QorIQ LS1012A
1108	  Layerscape Architecture processor.
1109
1110config TARGET_LS1012ARDB
1111	bool "Support ls1012ardb"
1112	select ARCH_LS1012A
1113	select ARM64
1114	select BOARD_LATE_INIT
1115	imply SCSI
1116	imply SCSI_AHCI
1117	help
1118	  Support for Freescale LS1012ARDB platform.
1119	  The LS1012A Reference design board (RDB) is a high-performance
1120	  development platform that supports the QorIQ LS1012A
1121	  Layerscape Architecture processor.
1122
1123config TARGET_LS1012A2G5RDB
1124	bool "Support ls1012a2g5rdb"
1125	select ARCH_LS1012A
1126	select ARM64
1127	select BOARD_LATE_INIT
1128	imply SCSI
1129	help
1130	  Support for Freescale LS1012A2G5RDB platform.
1131	  The LS1012A 2G5 Reference design board (RDB) is a high-performance
1132	  development platform that supports the QorIQ LS1012A
1133	  Layerscape Architecture processor.
1134
1135config TARGET_LS1012AFRWY
1136	bool "Support ls1012afrwy"
1137	select ARCH_LS1012A
1138	select ARM64
1139	select BOARD_LATE_INIT
1140	imply SCSI
1141	imply SCSI_AHCI
1142	help
1143	 Support for Freescale LS1012AFRWY platform.
1144	 The LS1012A FRWY board (FRWY) is a high-performance
1145	 development platform that supports the QorIQ LS1012A
1146	 Layerscape Architecture processor.
1147
1148config TARGET_LS1012AFRDM
1149	bool "Support ls1012afrdm"
1150	select ARCH_LS1012A
1151	select ARM64
1152	help
1153	  Support for Freescale LS1012AFRDM platform.
1154	  The LS1012A Freedom  board (FRDM) is a high-performance
1155	  development platform that supports the QorIQ LS1012A
1156	  Layerscape Architecture processor.
1157
1158config TARGET_LS1088ARDB
1159	bool "Support ls1088ardb"
1160	select ARCH_LS1088A
1161	select ARCH_MISC_INIT
1162	select ARM64
1163	select ARMV8_MULTIENTRY
1164	select BOARD_LATE_INIT
1165	select SUPPORT_SPL
1166	help
1167	  Support for NXP LS1088ARDB platform.
1168	  The LS1088A Reference design board (RDB) is a high-performance
1169	  development platform that supports the QorIQ LS1088A
1170	  Layerscape Architecture processor.
1171
1172config TARGET_LS1021AQDS
1173	bool "Support ls1021aqds"
1174	select ARCH_LS1021A
1175	select ARCH_SUPPORT_PSCI
1176	select BOARD_EARLY_INIT_F
1177	select BOARD_LATE_INIT
1178	select CPU_V7A
1179	select CPU_V7_HAS_NONSEC
1180	select CPU_V7_HAS_VIRT
1181	select LS1_DEEP_SLEEP
1182	select SUPPORT_SPL
1183	select SYS_FSL_DDR
1184	imply SCSI
1185
1186config TARGET_LS1021ATWR
1187	bool "Support ls1021atwr"
1188	select ARCH_LS1021A
1189	select ARCH_SUPPORT_PSCI
1190	select BOARD_EARLY_INIT_F
1191	select BOARD_LATE_INIT
1192	select CPU_V7A
1193	select CPU_V7_HAS_NONSEC
1194	select CPU_V7_HAS_VIRT
1195	select LS1_DEEP_SLEEP
1196	select SUPPORT_SPL
1197	imply SCSI
1198
1199config TARGET_LS1021AIOT
1200	bool "Support ls1021aiot"
1201	select ARCH_LS1021A
1202	select ARCH_SUPPORT_PSCI
1203	select BOARD_LATE_INIT
1204	select CPU_V7A
1205	select CPU_V7_HAS_NONSEC
1206	select CPU_V7_HAS_VIRT
1207	select SUPPORT_SPL
1208	imply SCSI
1209	help
1210	  Support for Freescale LS1021AIOT platform.
1211	  The LS1021A Freescale board (IOT) is a high-performance
1212	  development platform that supports the QorIQ LS1021A
1213	  Layerscape Architecture processor.
1214
1215config TARGET_LS1043AQDS
1216	bool "Support ls1043aqds"
1217	select ARCH_LS1043A
1218	select ARM64
1219	select ARMV8_MULTIENTRY
1220	select BOARD_EARLY_INIT_F
1221	select BOARD_LATE_INIT
1222	select SUPPORT_SPL
1223	imply SCSI
1224	help
1225	  Support for Freescale LS1043AQDS platform.
1226
1227config TARGET_LS1043ARDB
1228	bool "Support ls1043ardb"
1229	select ARCH_LS1043A
1230	select ARM64
1231	select ARMV8_MULTIENTRY
1232	select BOARD_EARLY_INIT_F
1233	select BOARD_LATE_INIT
1234	select SUPPORT_SPL
1235	imply SCSI
1236	help
1237	  Support for Freescale LS1043ARDB platform.
1238
1239config TARGET_LS1046AQDS
1240	bool "Support ls1046aqds"
1241	select ARCH_LS1046A
1242	select ARM64
1243	select ARMV8_MULTIENTRY
1244	select BOARD_EARLY_INIT_F
1245	select BOARD_LATE_INIT
1246	select DM_SPI_FLASH if DM_SPI
1247	select SUPPORT_SPL
1248	imply SCSI
1249	help
1250	  Support for Freescale LS1046AQDS platform.
1251	  The LS1046A Development System (QDS) is a high-performance
1252	  development platform that supports the QorIQ LS1046A
1253	  Layerscape Architecture processor.
1254
1255config TARGET_LS1046ARDB
1256	bool "Support ls1046ardb"
1257	select ARCH_LS1046A
1258	select ARM64
1259	select ARMV8_MULTIENTRY
1260	select BOARD_EARLY_INIT_F
1261	select BOARD_LATE_INIT
1262	select DM_SPI_FLASH if DM_SPI
1263	select POWER_MC34VR500
1264	select SUPPORT_SPL
1265	imply SCSI
1266	help
1267	  Support for Freescale LS1046ARDB platform.
1268	  The LS1046A Reference Design Board (RDB) is a high-performance
1269	  development platform that supports the QorIQ LS1046A
1270	  Layerscape Architecture processor.
1271
1272config TARGET_H2200
1273	bool "Support h2200"
1274	select CPU_PXA
1275
1276config TARGET_ZIPITZ2
1277	bool "Support zipitz2"
1278	select CPU_PXA
1279
1280config TARGET_COLIBRI_PXA270
1281	bool "Support colibri_pxa270"
1282	select CPU_PXA
1283
1284config ARCH_UNIPHIER
1285	bool "Socionext UniPhier SoCs"
1286	select BOARD_LATE_INIT
1287	select DM
1288	select DM_GPIO
1289	select DM_I2C
1290	select DM_MMC
1291	select DM_RESET
1292	select DM_SERIAL
1293	select DM_USB
1294	select OF_BOARD_SETUP
1295	select OF_CONTROL
1296	select OF_LIBFDT
1297	select PINCTRL
1298	select SPL_BOARD_INIT if SPL
1299	select SPL_DM if SPL
1300	select SPL_LIBCOMMON_SUPPORT if SPL
1301	select SPL_LIBGENERIC_SUPPORT if SPL
1302	select SPL_OF_CONTROL if SPL
1303	select SPL_PINCTRL if SPL
1304	select SUPPORT_SPL
1305	imply CMD_DM
1306	imply DISTRO_DEFAULTS
1307	imply FAT_WRITE
1308	help
1309	  Support for UniPhier SoC family developed by Socionext Inc.
1310	  (formerly, System LSI Business Division of Panasonic Corporation)
1311
1312config STM32
1313	bool "Support STMicroelectronics STM32 MCU with cortex M"
1314	select CPU_V7M
1315	select DM
1316	select DM_SERIAL
1317	imply CMD_DM
1318
1319config ARCH_STI
1320	bool "Support STMicrolectronics SoCs"
1321	select BLK
1322	select CPU_V7A
1323	select DM
1324	select DM_MMC
1325	select DM_RESET
1326	select DM_SERIAL
1327	imply CMD_DM
1328	help
1329	  Support for STMicroelectronics STiH407/10 SoC family.
1330	  This SoC is used on Linaro 96Board STiH410-B2260
1331
1332config ARCH_STM32MP
1333	bool "Support STMicroelectronics STM32MP Socs with cortex A"
1334	select ARCH_MISC_INIT
1335	select BOARD_LATE_INIT
1336	select CLK
1337	select DM
1338	select DM_GPIO
1339	select DM_RESET
1340	select DM_SERIAL
1341	select MISC
1342	select OF_CONTROL
1343	select OF_LIBFDT
1344	select PINCTRL
1345	select REGMAP
1346	select SUPPORT_SPL
1347	select SYSCON
1348	select SYSRESET
1349	select SYS_THUMB_BUILD
1350	imply CMD_DM
1351	help
1352	  Support for STM32MP SoC family developed by STMicroelectronics,
1353	  MPUs based on ARM cortex A core
1354	  U-BOOT is running in DDR and SPL support is the unsecure First Stage
1355	  BootLoader (FSBL)
1356
1357config ARCH_ROCKCHIP
1358	bool "Support Rockchip SoCs"
1359	select BLK
1360	select DM
1361	select DM_GPIO
1362	select DM_I2C
1363	select DM_MMC
1364	select DM_PWM
1365	select DM_REGULATOR
1366	select DM_SERIAL
1367	select DM_SPI
1368	select DM_SPI_FLASH
1369	select DM_USB if USB
1370	select ENABLE_ARM_SOC_BOOT0_HOOK
1371	select OF_CONTROL
1372	select SPI
1373	select SPL_DM if SPL
1374	select SPL_SYS_MALLOC_SIMPLE if SPL
1375	select SYS_MALLOC_F
1376	select SYS_THUMB_BUILD if !ARM64
1377	imply ADC
1378	imply CMD_DM
1379	imply DISTRO_DEFAULTS
1380	imply FAT_WRITE
1381	imply SARADC_ROCKCHIP
1382	imply SPL_SYSRESET
1383	imply SYS_NS16550
1384	imply TPL_SYSRESET
1385	imply USB_FUNCTION_FASTBOOT
1386
1387config TARGET_THUNDERX_88XX
1388	bool "Support ThunderX 88xx"
1389	select ARM64
1390	select OF_CONTROL
1391	select PL01X_SERIAL
1392	select SYS_CACHE_SHIFT_7
1393
1394config ARCH_ASPEED
1395	bool "Support Aspeed SoCs"
1396	select DM
1397	select OF_CONTROL
1398	imply CMD_DM
1399
1400endchoice
1401
1402config TI_SECURE_DEVICE
1403	bool "HS Device Type Support"
1404	depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
1405	help
1406	  If a high secure (HS) device type is being used, this config
1407	  must be set. This option impacts various aspects of the
1408	  build system (to create signed boot images that can be
1409	  authenticated) and the code. See the doc/README.ti-secure
1410	  file for further details.
1411
1412source "arch/arm/mach-aspeed/Kconfig"
1413
1414source "arch/arm/mach-at91/Kconfig"
1415
1416source "arch/arm/mach-bcm283x/Kconfig"
1417
1418source "arch/arm/mach-bcmstb/Kconfig"
1419
1420source "arch/arm/mach-davinci/Kconfig"
1421
1422source "arch/arm/mach-exynos/Kconfig"
1423
1424source "arch/arm/mach-highbank/Kconfig"
1425
1426source "arch/arm/mach-integrator/Kconfig"
1427
1428source "arch/arm/mach-k3/Kconfig"
1429
1430source "arch/arm/mach-keystone/Kconfig"
1431
1432source "arch/arm/mach-kirkwood/Kconfig"
1433
1434source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig"
1435
1436source "arch/arm/mach-mvebu/Kconfig"
1437
1438source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1439
1440source "arch/arm/mach-imx/mx2/Kconfig"
1441
1442source "arch/arm/mach-imx/mx3/Kconfig"
1443
1444source "arch/arm/mach-imx/mx5/Kconfig"
1445
1446source "arch/arm/mach-imx/mx6/Kconfig"
1447
1448source "arch/arm/mach-imx/mx7/Kconfig"
1449
1450source "arch/arm/mach-imx/mx7ulp/Kconfig"
1451
1452source "arch/arm/mach-imx/imx8/Kconfig"
1453
1454source "arch/arm/mach-imx/imx8m/Kconfig"
1455
1456source "arch/arm/mach-imx/mxs/Kconfig"
1457
1458source "arch/arm/mach-omap2/Kconfig"
1459
1460source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1461
1462source "arch/arm/mach-orion5x/Kconfig"
1463
1464source "arch/arm/mach-owl/Kconfig"
1465
1466source "arch/arm/mach-rmobile/Kconfig"
1467
1468source "arch/arm/mach-meson/Kconfig"
1469
1470source "arch/arm/mach-mediatek/Kconfig"
1471
1472source "arch/arm/mach-qemu/Kconfig"
1473
1474source "arch/arm/mach-rockchip/Kconfig"
1475
1476source "arch/arm/mach-s5pc1xx/Kconfig"
1477
1478source "arch/arm/mach-snapdragon/Kconfig"
1479
1480source "arch/arm/mach-socfpga/Kconfig"
1481
1482source "arch/arm/mach-sti/Kconfig"
1483
1484source "arch/arm/mach-stm32/Kconfig"
1485
1486source "arch/arm/mach-stm32mp/Kconfig"
1487
1488source "arch/arm/mach-sunxi/Kconfig"
1489
1490source "arch/arm/mach-tegra/Kconfig"
1491
1492source "arch/arm/mach-uniphier/Kconfig"
1493
1494source "arch/arm/cpu/armv7/vf610/Kconfig"
1495
1496source "arch/arm/mach-zynq/Kconfig"
1497
1498source "arch/arm/mach-versal/Kconfig"
1499
1500source "arch/arm/mach-zynqmp-r5/Kconfig"
1501
1502source "arch/arm/cpu/armv7/Kconfig"
1503
1504source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1505
1506source "arch/arm/cpu/armv8/Kconfig"
1507
1508source "arch/arm/mach-imx/Kconfig"
1509
1510source "board/bosch/shc/Kconfig"
1511source "board/CarMediaLab/flea3/Kconfig"
1512source "board/Marvell/aspenite/Kconfig"
1513source "board/Marvell/gplugd/Kconfig"
1514source "board/armadeus/apf27/Kconfig"
1515source "board/armltd/vexpress/Kconfig"
1516source "board/armltd/vexpress64/Kconfig"
1517source "board/broadcom/bcm23550_w1d/Kconfig"
1518source "board/broadcom/bcm28155_ap/Kconfig"
1519source "board/broadcom/bcm968580xref/Kconfig"
1520source "board/broadcom/bcmcygnus/Kconfig"
1521source "board/broadcom/bcmnsp/Kconfig"
1522source "board/broadcom/bcmns2/Kconfig"
1523source "board/cavium/thunderx/Kconfig"
1524source "board/cirrus/edb93xx/Kconfig"
1525source "board/eets/pdu001/Kconfig"
1526source "board/emulation/qemu-arm/Kconfig"
1527source "board/freescale/ls2080a/Kconfig"
1528source "board/freescale/ls2080aqds/Kconfig"
1529source "board/freescale/ls2080ardb/Kconfig"
1530source "board/freescale/ls1088a/Kconfig"
1531source "board/freescale/ls1021aqds/Kconfig"
1532source "board/freescale/ls1043aqds/Kconfig"
1533source "board/freescale/ls1021atwr/Kconfig"
1534source "board/freescale/ls1021aiot/Kconfig"
1535source "board/freescale/ls1046aqds/Kconfig"
1536source "board/freescale/ls1043ardb/Kconfig"
1537source "board/freescale/ls1046ardb/Kconfig"
1538source "board/freescale/ls1012aqds/Kconfig"
1539source "board/freescale/ls1012ardb/Kconfig"
1540source "board/freescale/ls1012afrdm/Kconfig"
1541source "board/freescale/mx35pdk/Kconfig"
1542source "board/freescale/s32v234evb/Kconfig"
1543source "board/grinn/chiliboard/Kconfig"
1544source "board/gumstix/pepper/Kconfig"
1545source "board/h2200/Kconfig"
1546source "board/hisilicon/hikey/Kconfig"
1547source "board/hisilicon/poplar/Kconfig"
1548source "board/isee/igep003x/Kconfig"
1549source "board/phytec/pcm051/Kconfig"
1550source "board/silica/pengwyn/Kconfig"
1551source "board/spear/spear300/Kconfig"
1552source "board/spear/spear310/Kconfig"
1553source "board/spear/spear320/Kconfig"
1554source "board/spear/spear600/Kconfig"
1555source "board/spear/x600/Kconfig"
1556source "board/st/stv0991/Kconfig"
1557source "board/tcl/sl50/Kconfig"
1558source "board/ucRobotics/bubblegum_96/Kconfig"
1559source "board/birdland/bav335x/Kconfig"
1560source "board/toradex/colibri_pxa270/Kconfig"
1561source "board/vscom/baltos/Kconfig"
1562source "board/woodburn/Kconfig"
1563source "board/xilinx/Kconfig"
1564source "board/xilinx/zynq/Kconfig"
1565source "board/xilinx/zynqmp/Kconfig"
1566source "board/zipitz2/Kconfig"
1567
1568source "arch/arm/Kconfig.debug"
1569
1570endmenu
1571
1572config SPL_LDSCRIPT
1573	default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
1574	default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1575	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
1576
1577
1578