1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config ARCH_BCM6858 532 bool "Broadcom BCM6858 family" 533 select DM 534 select OF_CONTROL 535 imply CMD_DM 536 537config TARGET_VEXPRESS_CA15_TC2 538 bool "Support vexpress_ca15_tc2" 539 select CPU_V7A 540 select CPU_V7_HAS_NONSEC 541 select CPU_V7_HAS_VIRT 542 select PL011_SERIAL 543 544config ARCH_BCMSTB 545 bool "Broadcom BCM7XXX family" 546 select CPU_V7A 547 select DM 548 select OF_CONTROL 549 select OF_PRIOR_STAGE 550 imply CMD_DM 551 help 552 This enables support for Broadcom ARM-based set-top box 553 chipsets, including the 7445 family of chips. 554 555config TARGET_VEXPRESS_CA5X2 556 bool "Support vexpress_ca5x2" 557 select CPU_V7A 558 select PL011_SERIAL 559 560config TARGET_VEXPRESS_CA9X4 561 bool "Support vexpress_ca9x4" 562 select CPU_V7A 563 select PL011_SERIAL 564 565config TARGET_BCM23550_W1D 566 bool "Support bcm23550_w1d" 567 select CPU_V7A 568 imply CRC32_VERIFY 569 imply FAT_WRITE 570 571config TARGET_BCM28155_AP 572 bool "Support bcm28155_ap" 573 select CPU_V7A 574 imply CRC32_VERIFY 575 imply FAT_WRITE 576 577config TARGET_BCMCYGNUS 578 bool "Support bcmcygnus" 579 select CPU_V7A 580 imply BCM_SF2_ETH 581 imply BCM_SF2_ETH_GMAC 582 imply CMD_HASH 583 imply CRC32_VERIFY 584 imply FAT_WRITE 585 imply HASH_VERIFY 586 imply NETDEVICES 587 588config TARGET_BCMNSP 589 bool "Support bcmnsp" 590 select CPU_V7A 591 592config TARGET_BCMNS2 593 bool "Support Broadcom Northstar2" 594 select ARM64 595 help 596 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 597 ARMv8 Cortex-A57 processors targeting a broad range of networking 598 applications 599 600config ARCH_EXYNOS 601 bool "Samsung EXYNOS" 602 select DM 603 select DM_GPIO 604 select DM_I2C 605 select DM_KEYBOARD 606 select DM_SERIAL 607 select DM_SPI 608 select DM_SPI_FLASH 609 select SPI 610 imply CMD_DM 611 imply FAT_WRITE 612 613config ARCH_S5PC1XX 614 bool "Samsung S5PC1XX" 615 select CPU_V7A 616 select DM 617 select DM_GPIO 618 select DM_I2C 619 select DM_SERIAL 620 imply CMD_DM 621 622config ARCH_HIGHBANK 623 bool "Calxeda Highbank" 624 select CPU_V7A 625 select PL011_SERIAL 626 627config ARCH_INTEGRATOR 628 bool "ARM Ltd. Integrator family" 629 select DM 630 select DM_SERIAL 631 select PL01X_SERIAL 632 imply CMD_DM 633 634config ARCH_KEYSTONE 635 bool "TI Keystone" 636 select CMD_POWEROFF 637 select CPU_V7A 638 select SUPPORT_SPL 639 select SYS_ARCH_TIMER 640 select SYS_THUMB_BUILD 641 imply CMD_MTDPARTS 642 imply CMD_SAVES 643 imply FIT 644 645config ARCH_K3 646 bool "Texas Instruments' K3 Architecture" 647 select SPL 648 select SUPPORT_SPL 649 select FIT 650 651config ARCH_OMAP2PLUS 652 bool "TI OMAP2+" 653 select CPU_V7A 654 select SPL_BOARD_INIT if SPL 655 select SPL_STACK_R if SPL 656 select SUPPORT_SPL 657 imply FIT 658 659config ARCH_MESON 660 bool "Amlogic Meson" 661 imply DISTRO_DEFAULTS 662 help 663 Support for the Meson SoC family developed by Amlogic Inc., 664 targeted at media players and tablet computers. We currently 665 support the S905 (GXBaby) 64-bit SoC. 666 667config ARCH_MEDIATEK 668 bool "MediaTek SoCs" 669 select BINMAN 670 select DM 671 select OF_CONTROL 672 select SPL_DM if SPL 673 select SPL_LIBCOMMON_SUPPORT if SPL 674 select SPL_LIBGENERIC_SUPPORT if SPL 675 select SPL_OF_CONTROL if SPL 676 select SUPPORT_SPL 677 help 678 Support for the MediaTek SoCs family developed by MediaTek Inc. 679 Please refer to doc/README.mediatek for more information. 680 681config ARCH_LPC32XX 682 bool "NXP LPC32xx platform" 683 select CPU_ARM926EJS 684 select DM 685 select DM_GPIO 686 select DM_SERIAL 687 select SPL_DM if SPL 688 select SUPPORT_SPL 689 imply CMD_DM 690 691config ARCH_IMX8 692 bool "NXP i.MX8 platform" 693 select ARM64 694 select DM 695 select OF_CONTROL 696 697config ARCH_MX8M 698 bool "NXP i.MX8M platform" 699 select ARM64 700 select DM 701 select SUPPORT_SPL 702 imply CMD_DM 703 704config ARCH_MX23 705 bool "NXP i.MX23 family" 706 select CPU_ARM926EJS 707 select PL011_SERIAL 708 select SUPPORT_SPL 709 710config ARCH_MX25 711 bool "NXP MX25" 712 select CPU_ARM926EJS 713 imply MXC_GPIO 714 715config ARCH_MX28 716 bool "NXP i.MX28 family" 717 select CPU_ARM926EJS 718 select PL011_SERIAL 719 select SUPPORT_SPL 720 721config ARCH_MX31 722 bool "NXP i.MX31 family" 723 select CPU_ARM1136 724 725config ARCH_MX7ULP 726 bool "NXP MX7ULP" 727 select CPU_V7A 728 select ROM_UNIFIED_SECTIONS 729 imply MXC_GPIO 730 731config ARCH_MX7 732 bool "Freescale MX7" 733 select ARCH_MISC_INIT 734 select BOARD_EARLY_INIT_F 735 select CPU_V7A 736 select SYS_FSL_HAS_SEC if SECURE_BOOT 737 select SYS_FSL_SEC_COMPAT_4 738 select SYS_FSL_SEC_LE 739 imply MXC_GPIO 740 741config ARCH_MX6 742 bool "Freescale MX6" 743 select CPU_V7A 744 select SYS_FSL_HAS_SEC if SECURE_BOOT 745 select SYS_FSL_SEC_COMPAT_4 746 select SYS_FSL_SEC_LE 747 select SYS_THUMB_BUILD if SPL 748 imply MXC_GPIO 749 750if ARCH_MX6 751config SPL_LDSCRIPT 752 default "arch/arm/mach-omap2/u-boot-spl.lds" 753endif 754 755config ARCH_MX5 756 bool "Freescale MX5" 757 select BOARD_EARLY_INIT_F 758 select CPU_V7A 759 imply MXC_GPIO 760 761config ARCH_OWL 762 bool "Actions Semi OWL SoCs" 763 select ARM64 764 select DM 765 select DM_SERIAL 766 select OF_CONTROL 767 imply CMD_DM 768 769config ARCH_QEMU 770 bool "QEMU Virtual Platform" 771 select DM 772 select DM_SERIAL 773 select OF_CONTROL 774 select PL01X_SERIAL 775 imply CMD_DM 776 imply DM_RTC 777 imply RTC_PL031 778 779config ARCH_RMOBILE 780 bool "Renesas ARM SoCs" 781 select BOARD_EARLY_INIT_F 782 select DM 783 select DM_SERIAL 784 imply CMD_DM 785 imply FAT_WRITE 786 imply SYS_THUMB_BUILD 787 imply ARCH_MISC_INIT if DISPLAY_CPUINFO 788 789config TARGET_S32V234EVB 790 bool "Support s32v234evb" 791 select ARM64 792 select SYS_FSL_ERRATUM_ESDHC111 793 794config ARCH_SNAPDRAGON 795 bool "Qualcomm Snapdragon SoCs" 796 select ARM64 797 select DM 798 select DM_GPIO 799 select DM_SERIAL 800 select MSM_SMEM 801 select OF_CONTROL 802 select OF_SEPARATE 803 select SMEM 804 select SPMI 805 imply CMD_DM 806 807config ARCH_SOCFPGA 808 bool "Altera SOCFPGA family" 809 select ARCH_EARLY_INIT_R 810 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 811 select ARM64 if TARGET_SOCFPGA_STRATIX10 812 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 813 select DM 814 select DM_SERIAL 815 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 816 select OF_CONTROL 817 select SPL_DM_RESET if DM_RESET 818 select SPL_DM_SERIAL 819 select SPL_LIBCOMMON_SUPPORT 820 select SPL_LIBDISK_SUPPORT 821 select SPL_LIBGENERIC_SUPPORT 822 select SPL_MMC_SUPPORT if DM_MMC 823 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 824 select SPL_OF_CONTROL 825 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 826 select SPL_SERIAL_SUPPORT 827 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 828 select SPL_SPI_SUPPORT if DM_SPI 829 select SPL_WATCHDOG_SUPPORT 830 select SUPPORT_SPL 831 select SYS_NS16550 832 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 833 imply CMD_DM 834 imply CMD_MTDPARTS 835 imply CRC32_VERIFY 836 imply DM_SPI 837 imply DM_SPI_FLASH 838 imply FAT_WRITE 839 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 840 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 841 842config ARCH_SUNXI 843 bool "Support sunxi (Allwinner) SoCs" 844 select BINMAN 845 select CMD_GPIO 846 select CMD_MMC if MMC 847 select CMD_USB if DISTRO_DEFAULTS 848 select DM 849 select DM_ETH 850 select DM_GPIO 851 select DM_KEYBOARD 852 select DM_SERIAL 853 select DM_USB if DISTRO_DEFAULTS 854 select OF_BOARD_SETUP 855 select OF_CONTROL 856 select OF_SEPARATE 857 select SPECIFY_CONSOLE_INDEX 858 select SPL_STACK_R if SPL 859 select SPL_SYS_MALLOC_SIMPLE if SPL 860 select SPL_SYS_THUMB_BUILD if !ARM64 861 select SYS_NS16550 862 select SYS_THUMB_BUILD if !ARM64 863 select USB if DISTRO_DEFAULTS 864 select USB_KEYBOARD if DISTRO_DEFAULTS 865 select USB_STORAGE if DISTRO_DEFAULTS 866 select USE_TINY_PRINTF 867 imply CMD_DM 868 imply CMD_GPT 869 imply CMD_UBI if NAND 870 imply DISTRO_DEFAULTS 871 imply FAT_WRITE 872 imply FIT 873 imply OF_LIBFDT_OVERLAY 874 imply PRE_CONSOLE_BUFFER 875 imply SPL_GPIO_SUPPORT 876 imply SPL_LIBCOMMON_SUPPORT 877 imply SPL_LIBDISK_SUPPORT 878 imply SPL_LIBGENERIC_SUPPORT 879 imply SPL_MMC_SUPPORT if MMC 880 imply SPL_POWER_SUPPORT 881 imply SPL_SERIAL_SUPPORT 882 imply USB_GADGET 883 884config ARCH_VERSAL 885 bool "Support Xilinx Versal Platform" 886 select ARM64 887 select CLK 888 select DM 889 select DM_SERIAL 890 select OF_CONTROL 891 892config ARCH_VF610 893 bool "Freescale Vybrid" 894 select CPU_V7A 895 select SYS_FSL_ERRATUM_ESDHC111 896 imply CMD_MTDPARTS 897 imply NAND 898 899config ARCH_ZYNQ 900 bool "Xilinx Zynq based platform" 901 select BOARD_EARLY_INIT_F if WDT 902 select CLK 903 select CLK_ZYNQ 904 select CPU_V7A 905 select DM 906 select DM_ETH if NET 907 select DM_MMC if MMC 908 select DM_SERIAL 909 select DM_SPI 910 select DM_SPI_FLASH 911 select DM_USB if USB 912 select OF_CONTROL 913 select SPI 914 select SPL_BOARD_INIT if SPL 915 select SPL_CLK if SPL 916 select SPL_DM if SPL 917 select SPL_OF_CONTROL if SPL 918 select SPL_SEPARATE_BSS if SPL 919 select SUPPORT_SPL 920 imply ARCH_EARLY_INIT_R 921 imply BOARD_LATE_INIT 922 imply CMD_CLK 923 imply CMD_DM 924 imply CMD_SPL 925 imply FAT_WRITE 926 927config ARCH_ZYNQMP_R5 928 bool "Xilinx ZynqMP R5 based platform" 929 select CLK 930 select CPU_V7R 931 select DM 932 select DM_SERIAL 933 select OF_CONTROL 934 imply CMD_DM 935 936config ARCH_ZYNQMP 937 bool "Xilinx ZynqMP based platform" 938 select ARM64 939 select CLK 940 select DM 941 select DM_SERIAL 942 select DM_USB if USB 943 select OF_CONTROL 944 select SPL_BOARD_INIT if SPL 945 select SPL_CLK if SPL 946 select SPL_SEPARATE_BSS if SPL 947 select SUPPORT_SPL 948 imply BOARD_LATE_INIT 949 imply CMD_DM 950 imply FAT_WRITE 951 imply MP 952 953config TEGRA 954 bool "NVIDIA Tegra" 955 imply DISTRO_DEFAULTS 956 imply FAT_WRITE 957 958config TARGET_VEXPRESS64_AEMV8A 959 bool "Support vexpress_aemv8a" 960 select ARM64 961 select PL01X_SERIAL 962 963config TARGET_VEXPRESS64_BASE_FVP 964 bool "Support Versatile Express ARMv8a FVP BASE model" 965 select ARM64 966 select PL01X_SERIAL 967 select SEMIHOSTING 968 969config TARGET_VEXPRESS64_BASE_FVP_DRAM 970 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 971 select ARM64 972 select PL01X_SERIAL 973 help 974 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 975 the default config to allow the user to load the images directly into 976 DRAM using model parameters rather than by using semi-hosting to load 977 the files from the host filesystem. 978 979config TARGET_VEXPRESS64_JUNO 980 bool "Support Versatile Express Juno Development Platform" 981 select ARM64 982 select PL01X_SERIAL 983 984config TARGET_LS2080A_EMU 985 bool "Support ls2080a_emu" 986 select ARCH_LS2080A 987 select ARCH_MISC_INIT 988 select ARM64 989 select ARMV8_MULTIENTRY 990 help 991 Support for Freescale LS2080A_EMU platform 992 The LS2080A Development System (EMULATOR) is a pre silicon 993 development platform that supports the QorIQ LS2080A 994 Layerscape Architecture processor. 995 996config TARGET_LS2080A_SIMU 997 bool "Support ls2080a_simu" 998 select ARCH_LS2080A 999 select ARCH_MISC_INIT 1000 select ARM64 1001 select ARMV8_MULTIENTRY 1002 help 1003 Support for Freescale LS2080A_SIMU platform 1004 The LS2080A Development System (QDS) is a pre silicon 1005 development platform that supports the QorIQ LS2080A 1006 Layerscape Architecture processor. 1007 1008config TARGET_LS1088AQDS 1009 bool "Support ls1088aqds" 1010 select ARCH_LS1088A 1011 select ARCH_MISC_INIT 1012 select ARM64 1013 select ARMV8_MULTIENTRY 1014 select BOARD_LATE_INIT 1015 select SUPPORT_SPL 1016 help 1017 Support for NXP LS1088AQDS platform 1018 The LS1088A Development System (QDS) is a high-performance 1019 development platform that supports the QorIQ LS1088A 1020 Layerscape Architecture processor. 1021 1022config TARGET_LS2080AQDS 1023 bool "Support ls2080aqds" 1024 select ARCH_LS2080A 1025 select ARCH_MISC_INIT 1026 select ARM64 1027 select ARMV8_MULTIENTRY 1028 select BOARD_LATE_INIT 1029 select SUPPORT_SPL 1030 imply SCSI 1031 imply SCSI_AHCI 1032 help 1033 Support for Freescale LS2080AQDS platform 1034 The LS2080A Development System (QDS) is a high-performance 1035 development platform that supports the QorIQ LS2080A 1036 Layerscape Architecture processor. 1037 1038config TARGET_LS2080ARDB 1039 bool "Support ls2080ardb" 1040 select ARCH_LS2080A 1041 select ARCH_MISC_INIT 1042 select ARM64 1043 select ARMV8_MULTIENTRY 1044 select BOARD_LATE_INIT 1045 select SUPPORT_SPL 1046 imply SCSI 1047 imply SCSI_AHCI 1048 help 1049 Support for Freescale LS2080ARDB platform. 1050 The LS2080A Reference design board (RDB) is a high-performance 1051 development platform that supports the QorIQ LS2080A 1052 Layerscape Architecture processor. 1053 1054config TARGET_LS2081ARDB 1055 bool "Support ls2081ardb" 1056 select ARCH_LS2080A 1057 select ARCH_MISC_INIT 1058 select ARM64 1059 select ARMV8_MULTIENTRY 1060 select BOARD_LATE_INIT 1061 select SUPPORT_SPL 1062 help 1063 Support for Freescale LS2081ARDB platform. 1064 The LS2081A Reference design board (RDB) is a high-performance 1065 development platform that supports the QorIQ LS2081A/LS2041A 1066 Layerscape Architecture processor. 1067 1068config TARGET_HIKEY 1069 bool "Support HiKey 96boards Consumer Edition Platform" 1070 select ARM64 1071 select DM 1072 select DM_GPIO 1073 select DM_SERIAL 1074 select OF_CONTROL 1075 select PL01X_SERIAL 1076 select SPECIFY_CONSOLE_INDEX 1077 imply CMD_DM 1078 help 1079 Support for HiKey 96boards platform. It features a HI6220 1080 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1081 1082config TARGET_POPLAR 1083 bool "Support Poplar 96boards Enterprise Edition Platform" 1084 select ARM64 1085 select DM 1086 select DM_SERIAL 1087 select DM_USB 1088 select OF_CONTROL 1089 select PL01X_SERIAL 1090 imply CMD_DM 1091 help 1092 Support for Poplar 96boards EE platform. It features a HI3798cv200 1093 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1094 making it capable of running any commercial set-top solution based on 1095 Linux or Android. 1096 1097config TARGET_LS1012AQDS 1098 bool "Support ls1012aqds" 1099 select ARCH_LS1012A 1100 select ARM64 1101 select BOARD_LATE_INIT 1102 help 1103 Support for Freescale LS1012AQDS platform. 1104 The LS1012A Development System (QDS) is a high-performance 1105 development platform that supports the QorIQ LS1012A 1106 Layerscape Architecture processor. 1107 1108config TARGET_LS1012ARDB 1109 bool "Support ls1012ardb" 1110 select ARCH_LS1012A 1111 select ARM64 1112 select BOARD_LATE_INIT 1113 imply SCSI 1114 imply SCSI_AHCI 1115 help 1116 Support for Freescale LS1012ARDB platform. 1117 The LS1012A Reference design board (RDB) is a high-performance 1118 development platform that supports the QorIQ LS1012A 1119 Layerscape Architecture processor. 1120 1121config TARGET_LS1012A2G5RDB 1122 bool "Support ls1012a2g5rdb" 1123 select ARCH_LS1012A 1124 select ARM64 1125 select BOARD_LATE_INIT 1126 imply SCSI 1127 help 1128 Support for Freescale LS1012A2G5RDB platform. 1129 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1130 development platform that supports the QorIQ LS1012A 1131 Layerscape Architecture processor. 1132 1133config TARGET_LS1012AFRWY 1134 bool "Support ls1012afrwy" 1135 select ARCH_LS1012A 1136 select ARM64 1137 select BOARD_LATE_INIT 1138 imply SCSI 1139 imply SCSI_AHCI 1140 help 1141 Support for Freescale LS1012AFRWY platform. 1142 The LS1012A FRWY board (FRWY) is a high-performance 1143 development platform that supports the QorIQ LS1012A 1144 Layerscape Architecture processor. 1145 1146config TARGET_LS1012AFRDM 1147 bool "Support ls1012afrdm" 1148 select ARCH_LS1012A 1149 select ARM64 1150 help 1151 Support for Freescale LS1012AFRDM platform. 1152 The LS1012A Freedom board (FRDM) is a high-performance 1153 development platform that supports the QorIQ LS1012A 1154 Layerscape Architecture processor. 1155 1156config TARGET_LS1088ARDB 1157 bool "Support ls1088ardb" 1158 select ARCH_LS1088A 1159 select ARCH_MISC_INIT 1160 select ARM64 1161 select ARMV8_MULTIENTRY 1162 select BOARD_LATE_INIT 1163 select SUPPORT_SPL 1164 help 1165 Support for NXP LS1088ARDB platform. 1166 The LS1088A Reference design board (RDB) is a high-performance 1167 development platform that supports the QorIQ LS1088A 1168 Layerscape Architecture processor. 1169 1170config TARGET_LS1021AQDS 1171 bool "Support ls1021aqds" 1172 select ARCH_LS1021A 1173 select ARCH_SUPPORT_PSCI 1174 select BOARD_EARLY_INIT_F 1175 select BOARD_LATE_INIT 1176 select CPU_V7A 1177 select CPU_V7_HAS_NONSEC 1178 select CPU_V7_HAS_VIRT 1179 select LS1_DEEP_SLEEP 1180 select SUPPORT_SPL 1181 select SYS_FSL_DDR 1182 imply SCSI 1183 1184config TARGET_LS1021ATWR 1185 bool "Support ls1021atwr" 1186 select ARCH_LS1021A 1187 select ARCH_SUPPORT_PSCI 1188 select BOARD_EARLY_INIT_F 1189 select BOARD_LATE_INIT 1190 select CPU_V7A 1191 select CPU_V7_HAS_NONSEC 1192 select CPU_V7_HAS_VIRT 1193 select LS1_DEEP_SLEEP 1194 select SUPPORT_SPL 1195 imply SCSI 1196 1197config TARGET_LS1021AIOT 1198 bool "Support ls1021aiot" 1199 select ARCH_LS1021A 1200 select ARCH_SUPPORT_PSCI 1201 select BOARD_LATE_INIT 1202 select CPU_V7A 1203 select CPU_V7_HAS_NONSEC 1204 select CPU_V7_HAS_VIRT 1205 select SUPPORT_SPL 1206 imply SCSI 1207 help 1208 Support for Freescale LS1021AIOT platform. 1209 The LS1021A Freescale board (IOT) is a high-performance 1210 development platform that supports the QorIQ LS1021A 1211 Layerscape Architecture processor. 1212 1213config TARGET_LS1043AQDS 1214 bool "Support ls1043aqds" 1215 select ARCH_LS1043A 1216 select ARM64 1217 select ARMV8_MULTIENTRY 1218 select BOARD_EARLY_INIT_F 1219 select BOARD_LATE_INIT 1220 select SUPPORT_SPL 1221 imply SCSI 1222 help 1223 Support for Freescale LS1043AQDS platform. 1224 1225config TARGET_LS1043ARDB 1226 bool "Support ls1043ardb" 1227 select ARCH_LS1043A 1228 select ARM64 1229 select ARMV8_MULTIENTRY 1230 select BOARD_EARLY_INIT_F 1231 select BOARD_LATE_INIT 1232 select SUPPORT_SPL 1233 imply SCSI 1234 help 1235 Support for Freescale LS1043ARDB platform. 1236 1237config TARGET_LS1046AQDS 1238 bool "Support ls1046aqds" 1239 select ARCH_LS1046A 1240 select ARM64 1241 select ARMV8_MULTIENTRY 1242 select BOARD_EARLY_INIT_F 1243 select BOARD_LATE_INIT 1244 select DM_SPI_FLASH if DM_SPI 1245 select SUPPORT_SPL 1246 imply SCSI 1247 help 1248 Support for Freescale LS1046AQDS platform. 1249 The LS1046A Development System (QDS) is a high-performance 1250 development platform that supports the QorIQ LS1046A 1251 Layerscape Architecture processor. 1252 1253config TARGET_LS1046ARDB 1254 bool "Support ls1046ardb" 1255 select ARCH_LS1046A 1256 select ARM64 1257 select ARMV8_MULTIENTRY 1258 select BOARD_EARLY_INIT_F 1259 select BOARD_LATE_INIT 1260 select DM_SPI_FLASH if DM_SPI 1261 select POWER_MC34VR500 1262 select SUPPORT_SPL 1263 imply SCSI 1264 help 1265 Support for Freescale LS1046ARDB platform. 1266 The LS1046A Reference Design Board (RDB) is a high-performance 1267 development platform that supports the QorIQ LS1046A 1268 Layerscape Architecture processor. 1269 1270config TARGET_H2200 1271 bool "Support h2200" 1272 select CPU_PXA 1273 1274config TARGET_ZIPITZ2 1275 bool "Support zipitz2" 1276 select CPU_PXA 1277 1278config TARGET_COLIBRI_PXA270 1279 bool "Support colibri_pxa270" 1280 select CPU_PXA 1281 1282config ARCH_UNIPHIER 1283 bool "Socionext UniPhier SoCs" 1284 select BOARD_LATE_INIT 1285 select DM 1286 select DM_GPIO 1287 select DM_I2C 1288 select DM_MMC 1289 select DM_RESET 1290 select DM_SERIAL 1291 select DM_USB 1292 select OF_BOARD_SETUP 1293 select OF_CONTROL 1294 select OF_LIBFDT 1295 select PINCTRL 1296 select SPL_BOARD_INIT if SPL 1297 select SPL_DM if SPL 1298 select SPL_LIBCOMMON_SUPPORT if SPL 1299 select SPL_LIBGENERIC_SUPPORT if SPL 1300 select SPL_OF_CONTROL if SPL 1301 select SPL_PINCTRL if SPL 1302 select SUPPORT_SPL 1303 imply CMD_DM 1304 imply DISTRO_DEFAULTS 1305 imply FAT_WRITE 1306 help 1307 Support for UniPhier SoC family developed by Socionext Inc. 1308 (formerly, System LSI Business Division of Panasonic Corporation) 1309 1310config STM32 1311 bool "Support STMicroelectronics STM32 MCU with cortex M" 1312 select CPU_V7M 1313 select DM 1314 select DM_SERIAL 1315 imply CMD_DM 1316 1317config ARCH_STI 1318 bool "Support STMicrolectronics SoCs" 1319 select BLK 1320 select CPU_V7A 1321 select DM 1322 select DM_MMC 1323 select DM_RESET 1324 select DM_SERIAL 1325 imply CMD_DM 1326 help 1327 Support for STMicroelectronics STiH407/10 SoC family. 1328 This SoC is used on Linaro 96Board STiH410-B2260 1329 1330config ARCH_STM32MP 1331 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1332 select ARCH_MISC_INIT 1333 select BOARD_LATE_INIT 1334 select CLK 1335 select DM 1336 select DM_GPIO 1337 select DM_RESET 1338 select DM_SERIAL 1339 select MISC 1340 select OF_CONTROL 1341 select OF_LIBFDT 1342 select PINCTRL 1343 select REGMAP 1344 select SUPPORT_SPL 1345 select SYSCON 1346 select SYSRESET 1347 select SYS_THUMB_BUILD 1348 imply CMD_DM 1349 help 1350 Support for STM32MP SoC family developed by STMicroelectronics, 1351 MPUs based on ARM cortex A core 1352 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1353 BootLoader (FSBL) 1354 1355config ARCH_ROCKCHIP 1356 bool "Support Rockchip SoCs" 1357 select BLK 1358 select DM 1359 select DM_GPIO 1360 select DM_I2C 1361 select DM_MMC 1362 select DM_PWM 1363 select DM_REGULATOR 1364 select DM_SERIAL 1365 select DM_SPI 1366 select DM_SPI_FLASH 1367 select DM_USB if USB 1368 select ENABLE_ARM_SOC_BOOT0_HOOK 1369 select OF_CONTROL 1370 select SPI 1371 select SPL_DM if SPL 1372 select SPL_SYS_MALLOC_SIMPLE if SPL 1373 select SYS_MALLOC_F 1374 select SYS_THUMB_BUILD if !ARM64 1375 imply ADC 1376 imply CMD_DM 1377 imply DISTRO_DEFAULTS 1378 imply FAT_WRITE 1379 imply SARADC_ROCKCHIP 1380 imply SPL_SYSRESET 1381 imply SYS_NS16550 1382 imply TPL_SYSRESET 1383 imply USB_FUNCTION_FASTBOOT 1384 1385config TARGET_THUNDERX_88XX 1386 bool "Support ThunderX 88xx" 1387 select ARM64 1388 select OF_CONTROL 1389 select PL01X_SERIAL 1390 select SYS_CACHE_SHIFT_7 1391 1392config ARCH_ASPEED 1393 bool "Support Aspeed SoCs" 1394 select DM 1395 select OF_CONTROL 1396 imply CMD_DM 1397 1398endchoice 1399 1400config TI_SECURE_DEVICE 1401 bool "HS Device Type Support" 1402 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1403 help 1404 If a high secure (HS) device type is being used, this config 1405 must be set. This option impacts various aspects of the 1406 build system (to create signed boot images that can be 1407 authenticated) and the code. See the doc/README.ti-secure 1408 file for further details. 1409 1410source "arch/arm/mach-aspeed/Kconfig" 1411 1412source "arch/arm/mach-at91/Kconfig" 1413 1414source "arch/arm/mach-bcm283x/Kconfig" 1415 1416source "arch/arm/mach-bcmstb/Kconfig" 1417 1418source "arch/arm/mach-davinci/Kconfig" 1419 1420source "arch/arm/mach-exynos/Kconfig" 1421 1422source "arch/arm/mach-highbank/Kconfig" 1423 1424source "arch/arm/mach-integrator/Kconfig" 1425 1426source "arch/arm/mach-k3/Kconfig" 1427 1428source "arch/arm/mach-keystone/Kconfig" 1429 1430source "arch/arm/mach-kirkwood/Kconfig" 1431 1432source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1433 1434source "arch/arm/mach-mvebu/Kconfig" 1435 1436source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1437 1438source "arch/arm/mach-imx/mx2/Kconfig" 1439 1440source "arch/arm/mach-imx/mx3/Kconfig" 1441 1442source "arch/arm/mach-imx/mx5/Kconfig" 1443 1444source "arch/arm/mach-imx/mx6/Kconfig" 1445 1446source "arch/arm/mach-imx/mx7/Kconfig" 1447 1448source "arch/arm/mach-imx/mx7ulp/Kconfig" 1449 1450source "arch/arm/mach-imx/imx8/Kconfig" 1451 1452source "arch/arm/mach-imx/mx8m/Kconfig" 1453 1454source "arch/arm/mach-imx/mxs/Kconfig" 1455 1456source "arch/arm/mach-omap2/Kconfig" 1457 1458source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1459 1460source "arch/arm/mach-orion5x/Kconfig" 1461 1462source "arch/arm/mach-owl/Kconfig" 1463 1464source "arch/arm/mach-rmobile/Kconfig" 1465 1466source "arch/arm/mach-meson/Kconfig" 1467 1468source "arch/arm/mach-mediatek/Kconfig" 1469 1470source "arch/arm/mach-qemu/Kconfig" 1471 1472source "arch/arm/mach-rockchip/Kconfig" 1473 1474source "arch/arm/mach-s5pc1xx/Kconfig" 1475 1476source "arch/arm/mach-snapdragon/Kconfig" 1477 1478source "arch/arm/mach-socfpga/Kconfig" 1479 1480source "arch/arm/mach-sti/Kconfig" 1481 1482source "arch/arm/mach-stm32/Kconfig" 1483 1484source "arch/arm/mach-stm32mp/Kconfig" 1485 1486source "arch/arm/mach-sunxi/Kconfig" 1487 1488source "arch/arm/mach-tegra/Kconfig" 1489 1490source "arch/arm/mach-uniphier/Kconfig" 1491 1492source "arch/arm/cpu/armv7/vf610/Kconfig" 1493 1494source "arch/arm/mach-zynq/Kconfig" 1495 1496source "arch/arm/mach-versal/Kconfig" 1497 1498source "arch/arm/mach-zynqmp-r5/Kconfig" 1499 1500source "arch/arm/cpu/armv7/Kconfig" 1501 1502source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1503 1504source "arch/arm/cpu/armv8/Kconfig" 1505 1506source "arch/arm/mach-imx/Kconfig" 1507 1508source "board/bosch/shc/Kconfig" 1509source "board/CarMediaLab/flea3/Kconfig" 1510source "board/Marvell/aspenite/Kconfig" 1511source "board/Marvell/gplugd/Kconfig" 1512source "board/armadeus/apf27/Kconfig" 1513source "board/armltd/vexpress/Kconfig" 1514source "board/armltd/vexpress64/Kconfig" 1515source "board/broadcom/bcm23550_w1d/Kconfig" 1516source "board/broadcom/bcm28155_ap/Kconfig" 1517source "board/broadcom/bcm968580xref/Kconfig" 1518source "board/broadcom/bcmcygnus/Kconfig" 1519source "board/broadcom/bcmnsp/Kconfig" 1520source "board/broadcom/bcmns2/Kconfig" 1521source "board/cavium/thunderx/Kconfig" 1522source "board/cirrus/edb93xx/Kconfig" 1523source "board/eets/pdu001/Kconfig" 1524source "board/emulation/qemu-arm/Kconfig" 1525source "board/freescale/ls2080a/Kconfig" 1526source "board/freescale/ls2080aqds/Kconfig" 1527source "board/freescale/ls2080ardb/Kconfig" 1528source "board/freescale/ls1088a/Kconfig" 1529source "board/freescale/ls1021aqds/Kconfig" 1530source "board/freescale/ls1043aqds/Kconfig" 1531source "board/freescale/ls1021atwr/Kconfig" 1532source "board/freescale/ls1021aiot/Kconfig" 1533source "board/freescale/ls1046aqds/Kconfig" 1534source "board/freescale/ls1043ardb/Kconfig" 1535source "board/freescale/ls1046ardb/Kconfig" 1536source "board/freescale/ls1012aqds/Kconfig" 1537source "board/freescale/ls1012ardb/Kconfig" 1538source "board/freescale/ls1012afrdm/Kconfig" 1539source "board/freescale/mx35pdk/Kconfig" 1540source "board/freescale/s32v234evb/Kconfig" 1541source "board/grinn/chiliboard/Kconfig" 1542source "board/gumstix/pepper/Kconfig" 1543source "board/h2200/Kconfig" 1544source "board/hisilicon/hikey/Kconfig" 1545source "board/hisilicon/poplar/Kconfig" 1546source "board/isee/igep003x/Kconfig" 1547source "board/phytec/pcm051/Kconfig" 1548source "board/silica/pengwyn/Kconfig" 1549source "board/spear/spear300/Kconfig" 1550source "board/spear/spear310/Kconfig" 1551source "board/spear/spear320/Kconfig" 1552source "board/spear/spear600/Kconfig" 1553source "board/spear/x600/Kconfig" 1554source "board/st/stv0991/Kconfig" 1555source "board/tcl/sl50/Kconfig" 1556source "board/ucRobotics/bubblegum_96/Kconfig" 1557source "board/birdland/bav335x/Kconfig" 1558source "board/toradex/colibri_pxa270/Kconfig" 1559source "board/vscom/baltos/Kconfig" 1560source "board/woodburn/Kconfig" 1561source "board/xilinx/Kconfig" 1562source "board/xilinx/zynq/Kconfig" 1563source "board/xilinx/zynqmp/Kconfig" 1564source "board/zipitz2/Kconfig" 1565 1566source "arch/arm/Kconfig.debug" 1567 1568endmenu 1569 1570config SPL_LDSCRIPT 1571 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1572 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1573 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1574 1575 1576