1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# If set, the workarounds for these ARM errata are applied early during U-Boot 23# startup. Note that in general these options force the workarounds to be 24# applied; no CPU-type/version detection exists, unlike the similar options in 25# the Linux kernel. Do not set these options unless they apply! Also note that 26# the following can be machine specific errata. These do have ability to 27# provide rudimentary version and machine specific checks, but expect no 28# product checks: 29# CONFIG_ARM_ERRATA_430973 30# CONFIG_ARM_ERRATA_454179 31# CONFIG_ARM_ERRATA_621766 32# CONFIG_ARM_ERRATA_798870 33# CONFIG_ARM_ERRATA_801819 34config ARM_ERRATA_430973 35 bool 36 37config ARM_ERRATA_454179 38 bool 39 40config ARM_ERRATA_621766 41 bool 42 43config ARM_ERRATA_716044 44 bool 45 46config ARM_ERRATA_725233 47 bool 48 49config ARM_ERRATA_742230 50 bool 51 52config ARM_ERRATA_743622 53 bool 54 55config ARM_ERRATA_751472 56 bool 57 58config ARM_ERRATA_761320 59 bool 60 61config ARM_ERRATA_773022 62 bool 63 64config ARM_ERRATA_774769 65 bool 66 67config ARM_ERRATA_794072 68 bool 69 70config ARM_ERRATA_798870 71 bool 72 73config ARM_ERRATA_801819 74 bool 75 76config ARM_ERRATA_826974 77 bool 78 79config ARM_ERRATA_828024 80 bool 81 82config ARM_ERRATA_829520 83 bool 84 85config ARM_ERRATA_833069 86 bool 87 88config ARM_ERRATA_833471 89 bool 90 91config CPU_ARM720T 92 bool 93 select SYS_CACHE_SHIFT_5 94 95config CPU_ARM920T 96 bool 97 select SYS_CACHE_SHIFT_5 98 99config CPU_ARM926EJS 100 bool 101 select SYS_CACHE_SHIFT_5 102 103config CPU_ARM946ES 104 bool 105 select SYS_CACHE_SHIFT_5 106 107config CPU_ARM1136 108 bool 109 select SYS_CACHE_SHIFT_5 110 111config CPU_ARM1176 112 bool 113 select HAS_VBAR 114 select SYS_CACHE_SHIFT_5 115 116config CPU_V7 117 bool 118 select HAS_VBAR 119 select HAS_THUMB2 120 select SYS_CACHE_SHIFT_6 121 122config CPU_V7M 123 bool 124 select HAS_THUMB2 125 select SYS_CACHE_SHIFT_5 126 127config CPU_PXA 128 bool 129 select SYS_CACHE_SHIFT_5 130 131config CPU_SA1100 132 bool 133 select SYS_CACHE_SHIFT_5 134 135config SYS_CPU 136 default "arm720t" if CPU_ARM720T 137 default "arm920t" if CPU_ARM920T 138 default "arm926ejs" if CPU_ARM926EJS 139 default "arm946es" if CPU_ARM946ES 140 default "arm1136" if CPU_ARM1136 141 default "arm1176" if CPU_ARM1176 142 default "armv7" if CPU_V7 143 default "armv7m" if CPU_V7M 144 default "pxa" if CPU_PXA 145 default "sa1100" if CPU_SA1100 146 default "armv8" if ARM64 147 148config SYS_ARM_ARCH 149 int 150 default 4 if CPU_ARM720T 151 default 4 if CPU_ARM920T 152 default 5 if CPU_ARM926EJS 153 default 5 if CPU_ARM946ES 154 default 6 if CPU_ARM1136 155 default 6 if CPU_ARM1176 156 default 7 if CPU_V7 157 default 7 if CPU_V7M 158 default 5 if CPU_PXA 159 default 4 if CPU_SA1100 160 default 8 if ARM64 161 162config SYS_CACHE_SHIFT_5 163 bool 164 165config SYS_CACHE_SHIFT_6 166 bool 167 168config SYS_CACHE_SHIFT_7 169 bool 170 171config SYS_CACHELINE_SIZE 172 int 173 default 128 if SYS_CACHE_SHIFT_7 174 default 64 if SYS_CACHE_SHIFT_6 175 default 32 if SYS_CACHE_SHIFT_5 176 177config SEMIHOSTING 178 bool "support boot from semihosting" 179 help 180 In emulated environments, semihosting is a way for 181 the hosted environment to call out to the emulator to 182 retrieve files from the host machine. 183 184config SYS_THUMB_BUILD 185 bool "Build U-Boot using the Thumb instruction set" 186 depends on !ARM64 187 help 188 Use this flag to build U-Boot using the Thumb instruction set for 189 ARM architectures. Thumb instruction set provides better code 190 density. For ARM architectures that support Thumb2 this flag will 191 result in Thumb2 code generated by GCC. 192 193config SPL_SYS_THUMB_BUILD 194 bool "Build SPL using the Thumb instruction set" 195 default y if SYS_THUMB_BUILD 196 depends on !ARM64 197 help 198 Use this flag to build SPL using the Thumb instruction set for 199 ARM architectures. Thumb instruction set provides better code 200 density. For ARM architectures that support Thumb2 this flag will 201 result in Thumb2 code generated by GCC. 202 203config SYS_L2CACHE_OFF 204 bool "L2cache off" 205 help 206 If SoC does not support L2CACHE or one do not want to enable 207 L2CACHE, choose this option. 208 209config ENABLE_ARM_SOC_BOOT0_HOOK 210 bool "prepare BOOT0 header" 211 help 212 If the SoC's BOOT0 requires a header area filled with (magic) 213 values, then choose this option, and create a define called 214 ARM_SOC_BOOT0_HOOK which contains the required assembler 215 preprocessor code. 216 217config USE_ARCH_MEMCPY 218 bool "Use an assembly optimized implementation of memcpy" 219 default y 220 depends on !ARM64 221 help 222 Enable the generation of an optimized version of memcpy. 223 Such implementation may be faster under some conditions 224 but may increase the binary size. 225 226config SPL_USE_ARCH_MEMCPY 227 bool "Use an assembly optimized implementation of memcpy" 228 default y if USE_ARCH_MEMCPY 229 depends on !ARM64 230 help 231 Enable the generation of an optimized version of memcpy. 232 Such implementation may be faster under some conditions 233 but may increase the binary size. 234 235config USE_ARCH_MEMSET 236 bool "Use an assembly optimized implementation of memset" 237 default y 238 depends on !ARM64 239 help 240 Enable the generation of an optimized version of memset. 241 Such implementation may be faster under some conditions 242 but may increase the binary size. 243 244config SPL_USE_ARCH_MEMSET 245 bool "Use an assembly optimized implementation of memset" 246 default y if USE_ARCH_MEMSET 247 depends on !ARM64 248 help 249 Enable the generation of an optimized version of memset. 250 Such implementation may be faster under some conditions 251 but may increase the binary size. 252 253config ARCH_OMAP2 254 bool 255 select CPU_V7 256 select SUPPORT_SPL 257 258config ARM64_SUPPORT_AARCH32 259 bool "ARM64 system support AArch32 execution state" 260 default y if ARM64 && !TARGET_THUNDERX_88XX 261 help 262 This ARM64 system supports AArch32 execution state. 263 264choice 265 prompt "Target select" 266 default TARGET_HIKEY 267 268config ARCH_AT91 269 bool "Atmel AT91" 270 271config TARGET_EDB93XX 272 bool "Support edb93xx" 273 select CPU_ARM920T 274 275config TARGET_ASPENITE 276 bool "Support aspenite" 277 select CPU_ARM926EJS 278 279config TARGET_GPLUGD 280 bool "Support gplugd" 281 select CPU_ARM926EJS 282 283config ARCH_DAVINCI 284 bool "TI DaVinci" 285 select CPU_ARM926EJS 286 help 287 Support for TI's DaVinci platform. 288 289config KIRKWOOD 290 bool "Marvell Kirkwood" 291 select CPU_ARM926EJS 292 select BOARD_EARLY_INIT_F 293 select ARCH_MISC_INIT 294 295config ARCH_MVEBU 296 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 297 select OF_CONTROL 298 select OF_SEPARATE 299 select DM 300 select DM_ETH 301 select DM_SERIAL 302 select DM_SPI 303 select DM_SPI_FLASH 304 305config TARGET_DEVKIT3250 306 bool "Support devkit3250" 307 select CPU_ARM926EJS 308 select SUPPORT_SPL 309 310config TARGET_WORK_92105 311 bool "Support work_92105" 312 select CPU_ARM926EJS 313 select SUPPORT_SPL 314 315config TARGET_MX25PDK 316 bool "Support mx25pdk" 317 select BOARD_LATE_INIT 318 select CPU_ARM926EJS 319 select BOARD_EARLY_INIT_F 320 321config TARGET_ZMX25 322 bool "Support zmx25" 323 select BOARD_LATE_INIT 324 select CPU_ARM926EJS 325 326config TARGET_APF27 327 bool "Support apf27" 328 select CPU_ARM926EJS 329 select SUPPORT_SPL 330 331config TARGET_APX4DEVKIT 332 bool "Support apx4devkit" 333 select CPU_ARM926EJS 334 select SUPPORT_SPL 335 336config TARGET_XFI3 337 bool "Support xfi3" 338 select CPU_ARM926EJS 339 select SUPPORT_SPL 340 341config TARGET_M28EVK 342 bool "Support m28evk" 343 select CPU_ARM926EJS 344 select SUPPORT_SPL 345 346config TARGET_MX23EVK 347 bool "Support mx23evk" 348 select CPU_ARM926EJS 349 select SUPPORT_SPL 350 select BOARD_EARLY_INIT_F 351 352config TARGET_MX28EVK 353 bool "Support mx28evk" 354 select CPU_ARM926EJS 355 select SUPPORT_SPL 356 select BOARD_EARLY_INIT_F 357 358config TARGET_MX23_OLINUXINO 359 bool "Support mx23_olinuxino" 360 select CPU_ARM926EJS 361 select SUPPORT_SPL 362 select BOARD_EARLY_INIT_F 363 364config TARGET_BG0900 365 bool "Support bg0900" 366 select CPU_ARM926EJS 367 select SUPPORT_SPL 368 369config TARGET_SANSA_FUZE_PLUS 370 bool "Support sansa_fuze_plus" 371 select CPU_ARM926EJS 372 select SUPPORT_SPL 373 374config TARGET_SC_SPS_1 375 bool "Support sc_sps_1" 376 select CPU_ARM926EJS 377 select SUPPORT_SPL 378 379config ORION5X 380 bool "Marvell Orion" 381 select CPU_ARM926EJS 382 383config TARGET_SPEAR300 384 bool "Support spear300" 385 select CPU_ARM926EJS 386 select BOARD_EARLY_INIT_F 387 388config TARGET_SPEAR310 389 bool "Support spear310" 390 select CPU_ARM926EJS 391 select BOARD_EARLY_INIT_F 392 393config TARGET_SPEAR320 394 bool "Support spear320" 395 select CPU_ARM926EJS 396 select BOARD_EARLY_INIT_F 397 398config TARGET_SPEAR600 399 bool "Support spear600" 400 select CPU_ARM926EJS 401 select BOARD_EARLY_INIT_F 402 403config TARGET_STV0991 404 bool "Support stv0991" 405 select CPU_V7 406 select DM 407 select DM_SERIAL 408 select DM_SPI 409 select DM_SPI_FLASH 410 select SPI_FLASH 411 412config TARGET_X600 413 bool "Support x600" 414 select BOARD_LATE_INIT 415 select CPU_ARM926EJS 416 select SUPPORT_SPL 417 418config TARGET_IMX31_PHYCORE 419 bool "Support imx31_phycore_eet" 420 select CPU_ARM1136 421 select BOARD_EARLY_INIT_F 422 423config TARGET_IMX31_PHYCORE_EET 424 bool "Support imx31_phycore_eet" 425 select BOARD_LATE_INIT 426 select CPU_ARM1136 427 select BOARD_EARLY_INIT_F 428 429config TARGET_MX31ADS 430 bool "Support mx31ads" 431 select CPU_ARM1136 432 select BOARD_EARLY_INIT_F 433 434config TARGET_MX31PDK 435 bool "Support mx31pdk" 436 select BOARD_LATE_INIT 437 select CPU_ARM1136 438 select SUPPORT_SPL 439 select BOARD_EARLY_INIT_F 440 441config TARGET_WOODBURN 442 bool "Support woodburn" 443 select CPU_ARM1136 444 445config TARGET_WOODBURN_SD 446 bool "Support woodburn_sd" 447 select CPU_ARM1136 448 select SUPPORT_SPL 449 450config TARGET_FLEA3 451 bool "Support flea3" 452 select CPU_ARM1136 453 454config TARGET_MX35PDK 455 bool "Support mx35pdk" 456 select BOARD_LATE_INIT 457 select CPU_ARM1136 458 459config ARCH_BCM283X 460 bool "Broadcom BCM283X family" 461 select DM 462 select DM_SERIAL 463 select DM_GPIO 464 select OF_CONTROL 465 466config TARGET_VEXPRESS_CA15_TC2 467 bool "Support vexpress_ca15_tc2" 468 select CPU_V7 469 select CPU_V7_HAS_NONSEC 470 select CPU_V7_HAS_VIRT 471 472config TARGET_VEXPRESS_CA5X2 473 bool "Support vexpress_ca5x2" 474 select CPU_V7 475 476config TARGET_VEXPRESS_CA9X4 477 bool "Support vexpress_ca9x4" 478 select CPU_V7 479 480config TARGET_BRXRE1 481 bool "Support BRXRE1" 482 select ARCH_OMAP2 483 select BOARD_LATE_INIT 484 485config TARGET_BRPPT1 486 bool "Support BRPPT1" 487 select ARCH_OMAP2 488 select BOARD_LATE_INIT 489 490config TARGET_DRACO 491 bool "Support draco" 492 select ARCH_OMAP2 493 select BOARD_LATE_INIT 494 select DM 495 select DM_SERIAL 496 select DM_GPIO 497 498config TARGET_THUBAN 499 bool "Support thuban" 500 select ARCH_OMAP2 501 select BOARD_LATE_INIT 502 select DM 503 select DM_SERIAL 504 select DM_GPIO 505 506config TARGET_RASTABAN 507 bool "Support rastaban" 508 select ARCH_OMAP2 509 select BOARD_LATE_INIT 510 select DM 511 select DM_SERIAL 512 select DM_GPIO 513 514config TARGET_ETAMIN 515 bool "Support etamin" 516 select ARCH_OMAP2 517 select BOARD_LATE_INIT 518 select DM 519 select DM_SERIAL 520 select DM_GPIO 521 522config TARGET_PXM2 523 bool "Support pxm2" 524 select ARCH_OMAP2 525 select BOARD_LATE_INIT 526 select DM 527 select DM_SERIAL 528 select DM_GPIO 529 530config TARGET_RUT 531 bool "Support rut" 532 select ARCH_OMAP2 533 select BOARD_LATE_INIT 534 select DM 535 select DM_SERIAL 536 select DM_GPIO 537 538config TARGET_TI814X_EVM 539 bool "Support ti814x_evm" 540 select ARCH_OMAP2 541 542config TARGET_TI816X_EVM 543 bool "Support ti816x_evm" 544 select ARCH_OMAP2 545 546config TARGET_BCM23550_W1D 547 bool "Support bcm23550_w1d" 548 select CPU_V7 549 550config TARGET_BCM28155_AP 551 bool "Support bcm28155_ap" 552 select CPU_V7 553 554config TARGET_BCMCYGNUS 555 bool "Support bcmcygnus" 556 select CPU_V7 557 558config TARGET_BCMNSP 559 bool "Support bcmnsp" 560 select CPU_V7 561 562config ARCH_EXYNOS 563 bool "Samsung EXYNOS" 564 select DM 565 select DM_I2C 566 select DM_SPI_FLASH 567 select DM_SERIAL 568 select DM_SPI 569 select DM_GPIO 570 select DM_KEYBOARD 571 572config ARCH_S5PC1XX 573 bool "Samsung S5PC1XX" 574 select CPU_V7 575 select DM 576 select DM_SERIAL 577 select DM_GPIO 578 select DM_I2C 579 580config ARCH_HIGHBANK 581 bool "Calxeda Highbank" 582 select CPU_V7 583 584config ARCH_INTEGRATOR 585 bool "ARM Ltd. Integrator family" 586 select DM 587 select DM_SERIAL 588 589config ARCH_KEYSTONE 590 bool "TI Keystone" 591 select CPU_V7 592 select SUPPORT_SPL 593 select SYS_THUMB_BUILD 594 select CMD_POWEROFF 595 596config ARCH_MESON 597 bool "Amlogic Meson" 598 help 599 Support for the Meson SoC family developed by Amlogic Inc., 600 targeted at media players and tablet computers. We currently 601 support the S905 (GXBaby) 64-bit SoC. 602 603config ARCH_MX7ULP 604 bool "NXP MX7ULP" 605 select CPU_V7 606 select ROM_UNIFIED_SECTIONS 607 608config ARCH_MX7 609 bool "Freescale MX7" 610 select CPU_V7 611 select SYS_FSL_HAS_SEC if SECURE_BOOT 612 select SYS_FSL_SEC_COMPAT_4 613 select SYS_FSL_SEC_LE 614 select BOARD_EARLY_INIT_F 615 select ARCH_MISC_INIT 616 617config ARCH_MX6 618 bool "Freescale MX6" 619 select CPU_V7 620 select SYS_FSL_HAS_SEC if SECURE_BOOT 621 select SYS_FSL_SEC_COMPAT_4 622 select SYS_FSL_SEC_LE 623 select SYS_THUMB_BUILD if SPL 624 625config ARCH_MX5 626 bool "Freescale MX5" 627 select CPU_V7 628 select BOARD_EARLY_INIT_F 629 630config TARGET_M53EVK 631 bool "Support m53evk" 632 select CPU_V7 633 select SUPPORT_SPL 634 select BOARD_EARLY_INIT_F 635 636config TARGET_MX51EVK 637 bool "Support mx51evk" 638 select BOARD_LATE_INIT 639 select CPU_V7 640 select BOARD_EARLY_INIT_F 641 642config TARGET_MX53ARD 643 bool "Support mx53ard" 644 select CPU_V7 645 select BOARD_EARLY_INIT_F 646 647config TARGET_MX53EVK 648 bool "Support mx53evk" 649 select BOARD_LATE_INIT 650 select CPU_V7 651 select BOARD_EARLY_INIT_F 652 653config TARGET_MX53LOCO 654 bool "Support mx53loco" 655 select BOARD_LATE_INIT 656 select CPU_V7 657 select BOARD_EARLY_INIT_F 658 659config TARGET_MX53SMD 660 bool "Support mx53smd" 661 select CPU_V7 662 select BOARD_EARLY_INIT_F 663 664config OMAP34XX 665 bool "OMAP34XX SoC" 666 select ARCH_OMAP2 667 select ARM_ERRATA_430973 668 select ARM_ERRATA_454179 669 select ARM_ERRATA_621766 670 select ARM_ERRATA_725233 671 select USE_TINY_PRINTF 672 imply SPL_EXT_SUPPORT 673 imply SPL_FAT_SUPPORT 674 imply SPL_GPIO_SUPPORT 675 imply SPL_I2C_SUPPORT 676 imply SPL_LIBCOMMON_SUPPORT 677 imply SPL_LIBDISK_SUPPORT 678 imply SPL_LIBGENERIC_SUPPORT 679 imply SPL_MMC_SUPPORT 680 imply SPL_NAND_SUPPORT 681 imply SPL_POWER_SUPPORT 682 imply SPL_SERIAL_SUPPORT 683 imply SYS_THUMB_BUILD 684 685config OMAP44XX 686 bool "OMAP44XX SoC" 687 select ARCH_OMAP2 688 select USE_TINY_PRINTF 689 imply SPL_DISPLAY_PRINT 690 imply SPL_EXT_SUPPORT 691 imply SPL_FAT_SUPPORT 692 imply SPL_GPIO_SUPPORT 693 imply SPL_I2C_SUPPORT 694 imply SPL_LIBCOMMON_SUPPORT 695 imply SPL_LIBDISK_SUPPORT 696 imply SPL_LIBGENERIC_SUPPORT 697 imply SPL_MMC_SUPPORT 698 imply SPL_NAND_SUPPORT 699 imply SPL_POWER_SUPPORT 700 imply SPL_SERIAL_SUPPORT 701 imply SYS_THUMB_BUILD 702 703config OMAP54XX 704 bool "OMAP54XX SoC" 705 select ARCH_OMAP2 706 select ARM_ERRATA_798870 707 select SYS_THUMB_BUILD 708 imply SPL_DISPLAY_PRINT 709 imply SPL_ENV_SUPPORT 710 imply SPL_EXT_SUPPORT 711 imply SPL_FAT_SUPPORT 712 imply SPL_GPIO_SUPPORT 713 imply SPL_I2C_SUPPORT 714 imply SPL_LIBCOMMON_SUPPORT 715 imply SPL_LIBDISK_SUPPORT 716 imply SPL_LIBGENERIC_SUPPORT 717 imply SPL_MMC_SUPPORT 718 imply SPL_NAND_SUPPORT 719 imply SPL_POWER_SUPPORT 720 imply SPL_SERIAL_SUPPORT 721 722config AM43XX 723 bool "AM43XX SoC" 724 select ARCH_OMAP2 725 imply SYS_THUMB_BUILD 726 help 727 Support for AM43xx SOC from Texas Instruments. 728 The AM43xx high performance SOC features a Cortex-A9 729 ARM core, a quad core PRU-ICSS for industrial Ethernet 730 protocols, dual camera support, optional 3D graphics 731 and an optional customer programmable secure boot. 732 733config AM33XX 734 bool "AM33XX SoC" 735 select ARCH_OMAP2 736 imply SYS_THUMB_BUILD 737 help 738 Support for AM335x SOC from Texas Instruments. 739 The AM335x high performance SOC features a Cortex-A8 740 ARM core, a dual core PRU-ICSS for industrial Ethernet 741 protocols, optional 3D graphics and an optional customer 742 programmable secure boot. 743 744config ARCH_RMOBILE 745 bool "Renesas ARM SoCs" 746 select DM 747 select DM_SERIAL 748 select BOARD_EARLY_INIT_F 749 imply SYS_THUMB_BUILD 750 751config TARGET_S32V234EVB 752 bool "Support s32v234evb" 753 select ARM64 754 select SYS_FSL_ERRATUM_ESDHC111 755 756config ARCH_SNAPDRAGON 757 bool "Qualcomm Snapdragon SoCs" 758 select ARM64 759 select DM 760 select DM_GPIO 761 select DM_SERIAL 762 select SPMI 763 select OF_CONTROL 764 select OF_SEPARATE 765 766config ARCH_SOCFPGA 767 bool "Altera SOCFPGA family" 768 select CPU_V7 769 select SUPPORT_SPL 770 select OF_CONTROL 771 select SPL_OF_CONTROL 772 select DM 773 select DM_SPI_FLASH 774 select DM_SPI 775 select ENABLE_ARM_SOC_BOOT0_HOOK 776 select ARCH_EARLY_INIT_R 777 select ARCH_MISC_INIT 778 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 779 select SYS_THUMB_BUILD 780 781config TARGET_CM_T43 782 bool "Support cm_t43" 783 select ARCH_OMAP2 784 785config ARCH_SUNXI 786 bool "Support sunxi (Allwinner) SoCs" 787 select CMD_GPIO 788 select CMD_MMC if MMC 789 select CMD_USB if DISTRO_DEFAULTS 790 select DM 791 select DM_ETH 792 select DM_GPIO 793 select DM_KEYBOARD 794 select DM_SERIAL 795 select DM_USB if DISTRO_DEFAULTS 796 select OF_BOARD_SETUP 797 select OF_CONTROL 798 select OF_SEPARATE 799 select SPL_STACK_R if SUPPORT_SPL 800 select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL 801 select SYS_NS16550 802 select SPL_SYS_THUMB_BUILD if !ARM64 803 select USB if DISTRO_DEFAULTS 804 select USB_STORAGE if DISTRO_DEFAULTS 805 select USB_KEYBOARD if DISTRO_DEFAULTS 806 select USE_TINY_PRINTF 807 808config TARGET_TS4600 809 bool "Support TS4600" 810 select CPU_ARM926EJS 811 select SUPPORT_SPL 812 813config TARGET_TS4800 814 bool "Support TS4800" 815 select CPU_V7 816 select SYS_FSL_ERRATUM_ESDHC_A001 817 818config ARCH_VF610 819 bool "Freescale Vybrid" 820 select CPU_V7 821 select SYS_FSL_ERRATUM_ESDHC111 822 823config ARCH_ZYNQ 824 bool "Xilinx Zynq Platform" 825 select BOARD_LATE_INIT 826 select CPU_V7 827 select SUPPORT_SPL 828 select OF_CONTROL 829 select SPL_OF_CONTROL if SPL 830 select DM 831 select DM_ETH 832 select DM_GPIO 833 select SPL_DM if SPL 834 select DM_MMC 835 select DM_MMC_OPS 836 select DM_SPI 837 select DM_SERIAL 838 select DM_SPI_FLASH 839 select SPL_SEPARATE_BSS if SPL 840 select DM_USB if USB 841 select BLK 842 select CLK 843 select SPL_CLK 844 select CLK_ZYNQ 845 846config ARCH_ZYNQMP 847 bool "Support Xilinx ZynqMP Platform" 848 select ARM64 849 select BOARD_LATE_INIT 850 select DM 851 select OF_CONTROL 852 select DM_SERIAL 853 select SUPPORT_SPL 854 select CLK 855 select SPL_CLK 856 select DM_USB if USB 857 858config TEGRA 859 bool "NVIDIA Tegra" 860 861config TARGET_VEXPRESS64_AEMV8A 862 bool "Support vexpress_aemv8a" 863 select ARM64 864 865config TARGET_VEXPRESS64_BASE_FVP 866 bool "Support Versatile Express ARMv8a FVP BASE model" 867 select ARM64 868 select SEMIHOSTING 869 870config TARGET_VEXPRESS64_BASE_FVP_DRAM 871 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 872 select ARM64 873 help 874 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 875 the default config to allow the user to load the images directly into 876 DRAM using model parameters rather than by using semi-hosting to load 877 the files from the host filesystem. 878 879config TARGET_VEXPRESS64_JUNO 880 bool "Support Versatile Express Juno Development Platform" 881 select ARM64 882 883config TARGET_LS2080A_EMU 884 bool "Support ls2080a_emu" 885 select ARCH_LS2080A 886 select ARM64 887 select ARMV8_MULTIENTRY 888 select ARCH_MISC_INIT 889 help 890 Support for Freescale LS2080A_EMU platform 891 The LS2080A Development System (EMULATOR) is a pre silicon 892 development platform that supports the QorIQ LS2080A 893 Layerscape Architecture processor. 894 895config TARGET_LS2080A_SIMU 896 bool "Support ls2080a_simu" 897 select ARCH_LS2080A 898 select ARM64 899 select ARMV8_MULTIENTRY 900 select ARCH_MISC_INIT 901 help 902 Support for Freescale LS2080A_SIMU platform 903 The LS2080A Development System (QDS) is a pre silicon 904 development platform that supports the QorIQ LS2080A 905 Layerscape Architecture processor. 906 907config TARGET_LS2080AQDS 908 bool "Support ls2080aqds" 909 select ARCH_LS2080A 910 select ARM64 911 select ARMV8_MULTIENTRY 912 select BOARD_LATE_INIT 913 select SUPPORT_SPL 914 select ARCH_MISC_INIT 915 help 916 Support for Freescale LS2080AQDS platform 917 The LS2080A Development System (QDS) is a high-performance 918 development platform that supports the QorIQ LS2080A 919 Layerscape Architecture processor. 920 921config TARGET_LS2080ARDB 922 bool "Support ls2080ardb" 923 select ARCH_LS2080A 924 select ARM64 925 select ARMV8_MULTIENTRY 926 select BOARD_LATE_INIT 927 select SUPPORT_SPL 928 select ARCH_MISC_INIT 929 help 930 Support for Freescale LS2080ARDB platform. 931 The LS2080A Reference design board (RDB) is a high-performance 932 development platform that supports the QorIQ LS2080A 933 Layerscape Architecture processor. 934 935config TARGET_HIKEY 936 bool "Support HiKey 96boards Consumer Edition Platform" 937 select ARM64 938 select DM 939 select DM_GPIO 940 select DM_SERIAL 941 select OF_CONTROL 942 help 943 Support for HiKey 96boards platform. It features a HI6220 944 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 945 946config TARGET_LS1012AQDS 947 bool "Support ls1012aqds" 948 select ARCH_LS1012A 949 select ARM64 950 select BOARD_LATE_INIT 951 help 952 Support for Freescale LS1012AQDS platform. 953 The LS1012A Development System (QDS) is a high-performance 954 development platform that supports the QorIQ LS1012A 955 Layerscape Architecture processor. 956 957config TARGET_LS1012ARDB 958 bool "Support ls1012ardb" 959 select ARCH_LS1012A 960 select ARM64 961 select BOARD_LATE_INIT 962 help 963 Support for Freescale LS1012ARDB platform. 964 The LS1012A Reference design board (RDB) is a high-performance 965 development platform that supports the QorIQ LS1012A 966 Layerscape Architecture processor. 967 968config TARGET_LS1012AFRDM 969 bool "Support ls1012afrdm" 970 select ARCH_LS1012A 971 select ARM64 972 help 973 Support for Freescale LS1012AFRDM platform. 974 The LS1012A Freedom board (FRDM) is a high-performance 975 development platform that supports the QorIQ LS1012A 976 Layerscape Architecture processor. 977 978config TARGET_LS1021AQDS 979 bool "Support ls1021aqds" 980 select BOARD_LATE_INIT 981 select CPU_V7 982 select CPU_V7_HAS_NONSEC 983 select CPU_V7_HAS_VIRT 984 select SUPPORT_SPL 985 select ARCH_LS1021A 986 select ARCH_SUPPORT_PSCI 987 select LS1_DEEP_SLEEP 988 select SYS_FSL_DDR 989 select BOARD_EARLY_INIT_F 990 991config TARGET_LS1021ATWR 992 bool "Support ls1021atwr" 993 select BOARD_LATE_INIT 994 select CPU_V7 995 select CPU_V7_HAS_NONSEC 996 select CPU_V7_HAS_VIRT 997 select SUPPORT_SPL 998 select ARCH_LS1021A 999 select ARCH_SUPPORT_PSCI 1000 select LS1_DEEP_SLEEP 1001 select BOARD_EARLY_INIT_F 1002 1003config TARGET_LS1021AIOT 1004 bool "Support ls1021aiot" 1005 select BOARD_LATE_INIT 1006 select CPU_V7 1007 select CPU_V7_HAS_NONSEC 1008 select CPU_V7_HAS_VIRT 1009 select SUPPORT_SPL 1010 select ARCH_LS1021A 1011 select ARCH_SUPPORT_PSCI 1012 help 1013 Support for Freescale LS1021AIOT platform. 1014 The LS1021A Freescale board (IOT) is a high-performance 1015 development platform that supports the QorIQ LS1021A 1016 Layerscape Architecture processor. 1017 1018config TARGET_LS1043AQDS 1019 bool "Support ls1043aqds" 1020 select ARCH_LS1043A 1021 select ARM64 1022 select ARMV8_MULTIENTRY 1023 select BOARD_LATE_INIT 1024 select SUPPORT_SPL 1025 select BOARD_EARLY_INIT_F 1026 help 1027 Support for Freescale LS1043AQDS platform. 1028 1029config TARGET_LS1043ARDB 1030 bool "Support ls1043ardb" 1031 select ARCH_LS1043A 1032 select ARM64 1033 select ARMV8_MULTIENTRY 1034 select BOARD_LATE_INIT 1035 select SUPPORT_SPL 1036 select BOARD_EARLY_INIT_F 1037 help 1038 Support for Freescale LS1043ARDB platform. 1039 1040config TARGET_LS1046AQDS 1041 bool "Support ls1046aqds" 1042 select ARCH_LS1046A 1043 select ARM64 1044 select ARMV8_MULTIENTRY 1045 select BOARD_LATE_INIT 1046 select SUPPORT_SPL 1047 select DM_SPI_FLASH if DM_SPI 1048 select BOARD_EARLY_INIT_F 1049 help 1050 Support for Freescale LS1046AQDS platform. 1051 The LS1046A Development System (QDS) is a high-performance 1052 development platform that supports the QorIQ LS1046A 1053 Layerscape Architecture processor. 1054 1055config TARGET_LS1046ARDB 1056 bool "Support ls1046ardb" 1057 select ARCH_LS1046A 1058 select ARM64 1059 select ARMV8_MULTIENTRY 1060 select BOARD_LATE_INIT 1061 select SUPPORT_SPL 1062 select DM_SPI_FLASH if DM_SPI 1063 select POWER_MC34VR500 1064 select BOARD_EARLY_INIT_F 1065 help 1066 Support for Freescale LS1046ARDB platform. 1067 The LS1046A Reference Design Board (RDB) is a high-performance 1068 development platform that supports the QorIQ LS1046A 1069 Layerscape Architecture processor. 1070 1071config TARGET_H2200 1072 bool "Support h2200" 1073 select CPU_PXA 1074 1075config TARGET_ZIPITZ2 1076 bool "Support zipitz2" 1077 select CPU_PXA 1078 1079config TARGET_COLIBRI_PXA270 1080 bool "Support colibri_pxa270" 1081 select CPU_PXA 1082 1083config ARCH_UNIPHIER 1084 bool "Socionext UniPhier SoCs" 1085 select BOARD_LATE_INIT 1086 select CLK_UNIPHIER 1087 select DM 1088 select DM_GPIO 1089 select DM_I2C 1090 select DM_MMC 1091 select DM_RESET 1092 select DM_SERIAL 1093 select DM_USB 1094 select OF_CONTROL 1095 select OF_LIBFDT 1096 select PINCTRL 1097 select SPL_DM if SPL 1098 select SPL_LIBCOMMON_SUPPORT if SPL 1099 select SPL_LIBGENERIC_SUPPORT if SPL 1100 select SPL_OF_CONTROL if SPL 1101 select SPL_PINCTRL if SPL 1102 select SUPPORT_SPL 1103 help 1104 Support for UniPhier SoC family developed by Socionext Inc. 1105 (formerly, System LSI Business Division of Panasonic Corporation) 1106 1107config STM32 1108 bool "Support STM32" 1109 select CPU_V7M 1110 select DM 1111 select DM_SERIAL 1112 select SYS_THUMB_BUILD 1113 1114config ARCH_STI 1115 bool "Support STMicrolectronics SoCs" 1116 select CPU_V7 1117 select DM 1118 select DM_SERIAL 1119 select BLK 1120 select DM_MMC 1121 help 1122 Support for STMicroelectronics STiH407/10 SoC family. 1123 This SoC is used on Linaro 96Board STiH410-B2260 1124 1125config ARCH_ROCKCHIP 1126 bool "Support Rockchip SoCs" 1127 select OF_CONTROL 1128 select BLK 1129 select DM 1130 select SPL_DM if SPL 1131 select SYS_MALLOC_F 1132 select SYS_THUMB_BUILD if !ARM64 1133 select SPL_SYS_MALLOC_SIMPLE if SPL 1134 select DM_GPIO 1135 select DM_I2C 1136 select DM_MMC 1137 select DM_MMC_OPS 1138 select DM_SERIAL 1139 select DM_SPI 1140 select DM_SPI_FLASH 1141 select DM_USB if USB 1142 select DM_PWM 1143 select DM_REGULATOR 1144 1145config TARGET_THUNDERX_88XX 1146 bool "Support ThunderX 88xx" 1147 select ARM64 1148 select OF_CONTROL 1149 select SYS_CACHE_SHIFT_7 1150 1151config ARCH_ASPEED 1152 bool "Support Aspeed SoCs" 1153 select OF_CONTROL 1154 select DM 1155 1156endchoice 1157 1158source "arch/arm/mach-aspeed/Kconfig" 1159 1160source "arch/arm/mach-at91/Kconfig" 1161 1162source "arch/arm/mach-bcm283x/Kconfig" 1163 1164source "arch/arm/mach-davinci/Kconfig" 1165 1166source "arch/arm/mach-exynos/Kconfig" 1167 1168source "arch/arm/mach-highbank/Kconfig" 1169 1170source "arch/arm/mach-integrator/Kconfig" 1171 1172source "arch/arm/mach-keystone/Kconfig" 1173 1174source "arch/arm/mach-kirkwood/Kconfig" 1175 1176source "arch/arm/mach-mvebu/Kconfig" 1177 1178source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1179 1180source "arch/arm/cpu/armv7/mx7ulp/Kconfig" 1181 1182source "arch/arm/cpu/armv7/mx7/Kconfig" 1183 1184source "arch/arm/cpu/armv7/mx6/Kconfig" 1185 1186source "arch/arm/cpu/armv7/mx5/Kconfig" 1187 1188source "arch/arm/mach-omap2/Kconfig" 1189 1190source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1191 1192source "arch/arm/mach-orion5x/Kconfig" 1193 1194source "arch/arm/mach-rmobile/Kconfig" 1195 1196source "arch/arm/mach-meson/Kconfig" 1197 1198source "arch/arm/mach-rockchip/Kconfig" 1199 1200source "arch/arm/mach-s5pc1xx/Kconfig" 1201 1202source "arch/arm/mach-snapdragon/Kconfig" 1203 1204source "arch/arm/mach-socfpga/Kconfig" 1205 1206source "arch/arm/mach-sti/Kconfig" 1207 1208source "arch/arm/mach-stm32/Kconfig" 1209 1210source "arch/arm/mach-tegra/Kconfig" 1211 1212source "arch/arm/mach-uniphier/Kconfig" 1213 1214source "arch/arm/cpu/armv7/vf610/Kconfig" 1215 1216source "arch/arm/mach-zynq/Kconfig" 1217 1218source "arch/arm/cpu/armv7/Kconfig" 1219 1220source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1221 1222source "arch/arm/cpu/armv8/Kconfig" 1223 1224source "arch/arm/imx-common/Kconfig" 1225 1226source "board/bosch/shc/Kconfig" 1227source "board/BuR/brxre1/Kconfig" 1228source "board/BuR/brppt1/Kconfig" 1229source "board/CarMediaLab/flea3/Kconfig" 1230source "board/Marvell/aspenite/Kconfig" 1231source "board/Marvell/gplugd/Kconfig" 1232source "board/armadeus/apf27/Kconfig" 1233source "board/armltd/vexpress/Kconfig" 1234source "board/armltd/vexpress64/Kconfig" 1235source "board/bluegiga/apx4devkit/Kconfig" 1236source "board/broadcom/bcm23550_w1d/Kconfig" 1237source "board/broadcom/bcm28155_ap/Kconfig" 1238source "board/broadcom/bcmcygnus/Kconfig" 1239source "board/broadcom/bcmnsp/Kconfig" 1240source "board/cavium/thunderx/Kconfig" 1241source "board/cirrus/edb93xx/Kconfig" 1242source "board/compulab/cm_t335/Kconfig" 1243source "board/compulab/cm_t43/Kconfig" 1244source "board/creative/xfi3/Kconfig" 1245source "board/denx/m28evk/Kconfig" 1246source "board/denx/m53evk/Kconfig" 1247source "board/freescale/ls2080a/Kconfig" 1248source "board/freescale/ls2080aqds/Kconfig" 1249source "board/freescale/ls2080ardb/Kconfig" 1250source "board/freescale/ls1021aqds/Kconfig" 1251source "board/freescale/ls1043aqds/Kconfig" 1252source "board/freescale/ls1021atwr/Kconfig" 1253source "board/freescale/ls1021aiot/Kconfig" 1254source "board/freescale/ls1046aqds/Kconfig" 1255source "board/freescale/ls1043ardb/Kconfig" 1256source "board/freescale/ls1046ardb/Kconfig" 1257source "board/freescale/ls1012aqds/Kconfig" 1258source "board/freescale/ls1012ardb/Kconfig" 1259source "board/freescale/ls1012afrdm/Kconfig" 1260source "board/freescale/mx23evk/Kconfig" 1261source "board/freescale/mx25pdk/Kconfig" 1262source "board/freescale/mx28evk/Kconfig" 1263source "board/freescale/mx31ads/Kconfig" 1264source "board/freescale/mx31pdk/Kconfig" 1265source "board/freescale/mx35pdk/Kconfig" 1266source "board/freescale/mx51evk/Kconfig" 1267source "board/freescale/mx53ard/Kconfig" 1268source "board/freescale/mx53evk/Kconfig" 1269source "board/freescale/mx53loco/Kconfig" 1270source "board/freescale/mx53smd/Kconfig" 1271source "board/freescale/s32v234evb/Kconfig" 1272source "board/grinn/chiliboard/Kconfig" 1273source "board/gumstix/pepper/Kconfig" 1274source "board/h2200/Kconfig" 1275source "board/hisilicon/hikey/Kconfig" 1276source "board/imx31_phycore/Kconfig" 1277source "board/isee/igep0033/Kconfig" 1278source "board/olimex/mx23_olinuxino/Kconfig" 1279source "board/phytec/pcm051/Kconfig" 1280source "board/ppcag/bg0900/Kconfig" 1281source "board/sandisk/sansa_fuze_plus/Kconfig" 1282source "board/schulercontrol/sc_sps_1/Kconfig" 1283source "board/siemens/draco/Kconfig" 1284source "board/siemens/pxm2/Kconfig" 1285source "board/siemens/rut/Kconfig" 1286source "board/silica/pengwyn/Kconfig" 1287source "board/spear/spear300/Kconfig" 1288source "board/spear/spear310/Kconfig" 1289source "board/spear/spear320/Kconfig" 1290source "board/spear/spear600/Kconfig" 1291source "board/spear/x600/Kconfig" 1292source "board/st/stv0991/Kconfig" 1293source "board/sunxi/Kconfig" 1294source "board/syteco/zmx25/Kconfig" 1295source "board/tcl/sl50/Kconfig" 1296source "board/ti/am335x/Kconfig" 1297source "board/ti/am43xx/Kconfig" 1298source "board/birdland/bav335x/Kconfig" 1299source "board/ti/ti814x/Kconfig" 1300source "board/ti/ti816x/Kconfig" 1301source "board/timll/devkit3250/Kconfig" 1302source "board/toradex/colibri_pxa270/Kconfig" 1303source "board/technologic/ts4600/Kconfig" 1304source "board/technologic/ts4800/Kconfig" 1305source "board/vscom/baltos/Kconfig" 1306source "board/woodburn/Kconfig" 1307source "board/work-microwave/work_92105/Kconfig" 1308source "board/zipitz2/Kconfig" 1309 1310source "arch/arm/Kconfig.debug" 1311 1312endmenu 1313