1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_845369 101 bool 102 103config ARM_ERRATA_852421 104 bool 105 106config ARM_ERRATA_852423 107 bool 108 109config CPU_ARM720T 110 bool 111 select SYS_CACHE_SHIFT_5 112 113config CPU_ARM920T 114 bool 115 select SYS_CACHE_SHIFT_5 116 117config CPU_ARM926EJS 118 bool 119 select SYS_CACHE_SHIFT_5 120 121config CPU_ARM946ES 122 bool 123 select SYS_CACHE_SHIFT_5 124 125config CPU_ARM1136 126 bool 127 select SYS_CACHE_SHIFT_5 128 129config CPU_ARM1176 130 bool 131 select HAS_VBAR 132 select SYS_CACHE_SHIFT_5 133 134config CPU_V7 135 bool 136 select HAS_VBAR 137 select HAS_THUMB2 138 select SYS_CACHE_SHIFT_6 139 140config CPU_V7M 141 bool 142 select HAS_THUMB2 143 select THUMB2_KERNEL 144 select SYS_CACHE_SHIFT_5 145 146config CPU_PXA 147 bool 148 select SYS_CACHE_SHIFT_5 149 150config CPU_SA1100 151 bool 152 select SYS_CACHE_SHIFT_5 153 154config SYS_CPU 155 default "arm720t" if CPU_ARM720T 156 default "arm920t" if CPU_ARM920T 157 default "arm926ejs" if CPU_ARM926EJS 158 default "arm946es" if CPU_ARM946ES 159 default "arm1136" if CPU_ARM1136 160 default "arm1176" if CPU_ARM1176 161 default "armv7" if CPU_V7 162 default "armv7m" if CPU_V7M 163 default "pxa" if CPU_PXA 164 default "sa1100" if CPU_SA1100 165 default "armv8" if ARM64 166 167config SYS_ARM_ARCH 168 int 169 default 4 if CPU_ARM720T 170 default 4 if CPU_ARM920T 171 default 5 if CPU_ARM926EJS 172 default 5 if CPU_ARM946ES 173 default 6 if CPU_ARM1136 174 default 6 if CPU_ARM1176 175 default 7 if CPU_V7 176 default 7 if CPU_V7M 177 default 5 if CPU_PXA 178 default 4 if CPU_SA1100 179 default 8 if ARM64 180 181config SYS_CACHE_SHIFT_5 182 bool 183 184config SYS_CACHE_SHIFT_6 185 bool 186 187config SYS_CACHE_SHIFT_7 188 bool 189 190config SYS_CACHELINE_SIZE 191 int 192 default 128 if SYS_CACHE_SHIFT_7 193 default 64 if SYS_CACHE_SHIFT_6 194 default 32 if SYS_CACHE_SHIFT_5 195 196config ARM_SMCCC 197 bool "Support for ARM SMC Calling Convention (SMCCC)" 198 depends on CPU_V7 || ARM64 199 select ARM_PSCI_FW 200 help 201 Say Y here if you want to enable ARM SMC Calling Convention. 202 This should be enabled if U-Boot needs to communicate with system 203 firmware (for example, PSCI) according to SMCCC. 204 205config SEMIHOSTING 206 bool "support boot from semihosting" 207 help 208 In emulated environments, semihosting is a way for 209 the hosted environment to call out to the emulator to 210 retrieve files from the host machine. 211 212config SYS_THUMB_BUILD 213 bool "Build U-Boot using the Thumb instruction set" 214 depends on !ARM64 215 help 216 Use this flag to build U-Boot using the Thumb instruction set for 217 ARM architectures. Thumb instruction set provides better code 218 density. For ARM architectures that support Thumb2 this flag will 219 result in Thumb2 code generated by GCC. 220 221config SPL_SYS_THUMB_BUILD 222 bool "Build SPL using the Thumb instruction set" 223 default y if SYS_THUMB_BUILD 224 depends on !ARM64 225 help 226 Use this flag to build SPL using the Thumb instruction set for 227 ARM architectures. Thumb instruction set provides better code 228 density. For ARM architectures that support Thumb2 this flag will 229 result in Thumb2 code generated by GCC. 230 231config SYS_L2CACHE_OFF 232 bool "L2cache off" 233 help 234 If SoC does not support L2CACHE or one do not want to enable 235 L2CACHE, choose this option. 236 237config ENABLE_ARM_SOC_BOOT0_HOOK 238 bool "prepare BOOT0 header" 239 help 240 If the SoC's BOOT0 requires a header area filled with (magic) 241 values, then choose this option, and create a define called 242 ARM_SOC_BOOT0_HOOK which contains the required assembler 243 preprocessor code. 244 245config ARM_CORTEX_CPU_IS_UP 246 bool 247 default n 248 249config USE_ARCH_MEMCPY 250 bool "Use an assembly optimized implementation of memcpy" 251 default y 252 depends on !ARM64 253 help 254 Enable the generation of an optimized version of memcpy. 255 Such implementation may be faster under some conditions 256 but may increase the binary size. 257 258config SPL_USE_ARCH_MEMCPY 259 bool "Use an assembly optimized implementation of memcpy for SPL" 260 default y if USE_ARCH_MEMCPY 261 depends on !ARM64 262 help 263 Enable the generation of an optimized version of memcpy. 264 Such implementation may be faster under some conditions 265 but may increase the binary size. 266 267config USE_ARCH_MEMSET 268 bool "Use an assembly optimized implementation of memset" 269 default y 270 depends on !ARM64 271 help 272 Enable the generation of an optimized version of memset. 273 Such implementation may be faster under some conditions 274 but may increase the binary size. 275 276config SPL_USE_ARCH_MEMSET 277 bool "Use an assembly optimized implementation of memset for SPL" 278 default y if USE_ARCH_MEMSET 279 depends on !ARM64 280 help 281 Enable the generation of an optimized version of memset. 282 Such implementation may be faster under some conditions 283 but may increase the binary size. 284 285config ARM64_SUPPORT_AARCH32 286 bool "ARM64 system support AArch32 execution state" 287 default y if ARM64 && !TARGET_THUNDERX_88XX 288 help 289 This ARM64 system supports AArch32 execution state. 290 291choice 292 prompt "Target select" 293 default TARGET_HIKEY 294 295config ARCH_AT91 296 bool "Atmel AT91" 297 select SPL_BOARD_INIT if SPL 298 299config TARGET_EDB93XX 300 bool "Support edb93xx" 301 select CPU_ARM920T 302 303config TARGET_ASPENITE 304 bool "Support aspenite" 305 select CPU_ARM926EJS 306 307config TARGET_GPLUGD 308 bool "Support gplugd" 309 select CPU_ARM926EJS 310 311config ARCH_DAVINCI 312 bool "TI DaVinci" 313 select CPU_ARM926EJS 314 imply CMD_SAVES 315 help 316 Support for TI's DaVinci platform. 317 318config KIRKWOOD 319 bool "Marvell Kirkwood" 320 select CPU_ARM926EJS 321 select BOARD_EARLY_INIT_F 322 select ARCH_MISC_INIT 323 324config ARCH_MVEBU 325 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 326 select OF_CONTROL 327 select OF_SEPARATE 328 select DM 329 select DM_ETH 330 select DM_SERIAL 331 select DM_SPI 332 select DM_SPI_FLASH 333 334config TARGET_DEVKIT3250 335 bool "Support devkit3250" 336 select CPU_ARM926EJS 337 select SUPPORT_SPL 338 339config TARGET_WORK_92105 340 bool "Support work_92105" 341 select CPU_ARM926EJS 342 select SUPPORT_SPL 343 344config TARGET_MX25PDK 345 bool "Support mx25pdk" 346 select BOARD_LATE_INIT 347 select CPU_ARM926EJS 348 select BOARD_EARLY_INIT_F 349 350config TARGET_ZMX25 351 bool "Support zmx25" 352 select BOARD_LATE_INIT 353 select CPU_ARM926EJS 354 355config TARGET_APF27 356 bool "Support apf27" 357 select CPU_ARM926EJS 358 select SUPPORT_SPL 359 360config TARGET_APX4DEVKIT 361 bool "Support apx4devkit" 362 select CPU_ARM926EJS 363 select SUPPORT_SPL 364 365config TARGET_XFI3 366 bool "Support xfi3" 367 select CPU_ARM926EJS 368 select SUPPORT_SPL 369 370config TARGET_M28EVK 371 bool "Support m28evk" 372 select CPU_ARM926EJS 373 select SUPPORT_SPL 374 375config TARGET_MX23EVK 376 bool "Support mx23evk" 377 select CPU_ARM926EJS 378 select SUPPORT_SPL 379 select BOARD_EARLY_INIT_F 380 381config TARGET_MX28EVK 382 bool "Support mx28evk" 383 select CPU_ARM926EJS 384 select SUPPORT_SPL 385 select BOARD_EARLY_INIT_F 386 387config TARGET_MX23_OLINUXINO 388 bool "Support mx23_olinuxino" 389 select CPU_ARM926EJS 390 select SUPPORT_SPL 391 select BOARD_EARLY_INIT_F 392 393config TARGET_BG0900 394 bool "Support bg0900" 395 select CPU_ARM926EJS 396 select SUPPORT_SPL 397 398config TARGET_SANSA_FUZE_PLUS 399 bool "Support sansa_fuze_plus" 400 select CPU_ARM926EJS 401 select SUPPORT_SPL 402 403config TARGET_SC_SPS_1 404 bool "Support sc_sps_1" 405 select CPU_ARM926EJS 406 select SUPPORT_SPL 407 408config ORION5X 409 bool "Marvell Orion" 410 select CPU_ARM926EJS 411 412config TARGET_SPEAR300 413 bool "Support spear300" 414 select CPU_ARM926EJS 415 select BOARD_EARLY_INIT_F 416 imply CMD_SAVES 417 418config TARGET_SPEAR310 419 bool "Support spear310" 420 select CPU_ARM926EJS 421 select BOARD_EARLY_INIT_F 422 imply CMD_SAVES 423 424config TARGET_SPEAR320 425 bool "Support spear320" 426 select CPU_ARM926EJS 427 select BOARD_EARLY_INIT_F 428 imply CMD_SAVES 429 430config TARGET_SPEAR600 431 bool "Support spear600" 432 select CPU_ARM926EJS 433 select BOARD_EARLY_INIT_F 434 imply CMD_SAVES 435 436config TARGET_STV0991 437 bool "Support stv0991" 438 select CPU_V7 439 select DM 440 select DM_SERIAL 441 select DM_SPI 442 select DM_SPI_FLASH 443 select SPI_FLASH 444 445config TARGET_X600 446 bool "Support x600" 447 select BOARD_LATE_INIT 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_IMX31_PHYCORE 452 bool "Support imx31_phycore_eet" 453 select CPU_ARM1136 454 select BOARD_EARLY_INIT_F 455 456config TARGET_IMX31_PHYCORE_EET 457 bool "Support imx31_phycore_eet" 458 select BOARD_LATE_INIT 459 select CPU_ARM1136 460 select BOARD_EARLY_INIT_F 461 462config TARGET_MX31ADS 463 bool "Support mx31ads" 464 select CPU_ARM1136 465 select BOARD_EARLY_INIT_F 466 467config TARGET_MX31PDK 468 bool "Support mx31pdk" 469 select BOARD_LATE_INIT 470 select CPU_ARM1136 471 select SUPPORT_SPL 472 select BOARD_EARLY_INIT_F 473 474config TARGET_WOODBURN 475 bool "Support woodburn" 476 select CPU_ARM1136 477 478config TARGET_WOODBURN_SD 479 bool "Support woodburn_sd" 480 select CPU_ARM1136 481 select SUPPORT_SPL 482 483config TARGET_FLEA3 484 bool "Support flea3" 485 select CPU_ARM1136 486 487config TARGET_MX35PDK 488 bool "Support mx35pdk" 489 select BOARD_LATE_INIT 490 select CPU_ARM1136 491 492config ARCH_BCM283X 493 bool "Broadcom BCM283X family" 494 select DM 495 select DM_SERIAL 496 select DM_GPIO 497 select OF_CONTROL 498 imply FAT_WRITE 499 500config TARGET_VEXPRESS_CA15_TC2 501 bool "Support vexpress_ca15_tc2" 502 select CPU_V7 503 select CPU_V7_HAS_NONSEC 504 select CPU_V7_HAS_VIRT 505 506config TARGET_VEXPRESS_CA5X2 507 bool "Support vexpress_ca5x2" 508 select CPU_V7 509 510config TARGET_VEXPRESS_CA9X4 511 bool "Support vexpress_ca9x4" 512 select CPU_V7 513 514config TARGET_BCM23550_W1D 515 bool "Support bcm23550_w1d" 516 select CPU_V7 517 imply CRC32_VERIFY 518 imply FAT_WRITE 519 520config TARGET_BCM28155_AP 521 bool "Support bcm28155_ap" 522 select CPU_V7 523 imply CRC32_VERIFY 524 imply FAT_WRITE 525 526config TARGET_BCMCYGNUS 527 bool "Support bcmcygnus" 528 select CPU_V7 529 imply CRC32_VERIFY 530 imply CMD_HASH 531 imply FAT_WRITE 532 imply HASH_VERIFY 533 imply NETDEVICES 534 imply BCM_SF2_ETH 535 imply BCM_SF2_ETH_GMAC 536 537config TARGET_BCMNSP 538 bool "Support bcmnsp" 539 select CPU_V7 540 541config TARGET_BCMNS2 542 bool "Support Broadcom Northstar2" 543 select ARM64 544 help 545 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 546 ARMv8 Cortex-A57 processors targeting a broad range of networking 547 applications 548 549config ARCH_EXYNOS 550 bool "Samsung EXYNOS" 551 select DM 552 select DM_I2C 553 select DM_SPI_FLASH 554 select DM_SERIAL 555 select DM_SPI 556 select DM_GPIO 557 select DM_KEYBOARD 558 imply FAT_WRITE 559 560config ARCH_S5PC1XX 561 bool "Samsung S5PC1XX" 562 select CPU_V7 563 select DM 564 select DM_SERIAL 565 select DM_GPIO 566 select DM_I2C 567 568config ARCH_HIGHBANK 569 bool "Calxeda Highbank" 570 select CPU_V7 571 572config ARCH_INTEGRATOR 573 bool "ARM Ltd. Integrator family" 574 select DM 575 select DM_SERIAL 576 577config ARCH_KEYSTONE 578 bool "TI Keystone" 579 select CPU_V7 580 select SUPPORT_SPL 581 select SYS_THUMB_BUILD 582 select CMD_POWEROFF 583 imply CMD_MTDPARTS 584 imply FIT 585 imply CMD_SAVES 586 587config ARCH_OMAP2PLUS 588 bool "TI OMAP2+" 589 select CPU_V7 590 select SPL_BOARD_INIT if SPL 591 select SPL_STACK_R if SPL 592 select SUPPORT_SPL 593 imply FIT 594 595config ARCH_MESON 596 bool "Amlogic Meson" 597 help 598 Support for the Meson SoC family developed by Amlogic Inc., 599 targeted at media players and tablet computers. We currently 600 support the S905 (GXBaby) 64-bit SoC. 601 602config ARCH_MX7ULP 603 bool "NXP MX7ULP" 604 select CPU_V7 605 select ROM_UNIFIED_SECTIONS 606 607config ARCH_MX7 608 bool "Freescale MX7" 609 select CPU_V7 610 select SYS_FSL_HAS_SEC if SECURE_BOOT 611 select SYS_FSL_SEC_COMPAT_4 612 select SYS_FSL_SEC_LE 613 select BOARD_EARLY_INIT_F 614 select ARCH_MISC_INIT 615 616config ARCH_MX6 617 bool "Freescale MX6" 618 select CPU_V7 619 select SYS_FSL_HAS_SEC if SECURE_BOOT 620 select SYS_FSL_SEC_COMPAT_4 621 select SYS_FSL_SEC_LE 622 select SYS_THUMB_BUILD if SPL 623 624if ARCH_MX6 625config SPL_LDSCRIPT 626 default "arch/arm/mach-omap2/u-boot-spl.lds" 627endif 628 629config ARCH_MX5 630 bool "Freescale MX5" 631 select CPU_V7 632 select BOARD_EARLY_INIT_F 633 634config ARCH_QEMU 635 bool "QEMU Virtual Platform" 636 select CPU_V7 637 select ARCH_SUPPORT_PSCI 638 select DM 639 select DM_SERIAL 640 select OF_CONTROL 641 642config ARCH_RMOBILE 643 bool "Renesas ARM SoCs" 644 select DM 645 select DM_SERIAL 646 select BOARD_EARLY_INIT_F 647 imply FAT_WRITE 648 imply SYS_THUMB_BUILD 649 650config TARGET_S32V234EVB 651 bool "Support s32v234evb" 652 select ARM64 653 select SYS_FSL_ERRATUM_ESDHC111 654 655config ARCH_SNAPDRAGON 656 bool "Qualcomm Snapdragon SoCs" 657 select ARM64 658 select DM 659 select DM_GPIO 660 select DM_SERIAL 661 select SPMI 662 select OF_CONTROL 663 select OF_SEPARATE 664 665config ARCH_SOCFPGA 666 bool "Altera SOCFPGA family" 667 select CPU_V7 668 select SUPPORT_SPL 669 select OF_CONTROL 670 select SPL_OF_CONTROL 671 select DM 672 select DM_SPI_FLASH 673 select DM_SPI 674 select ENABLE_ARM_SOC_BOOT0_HOOK 675 select ARCH_EARLY_INIT_R 676 select ARCH_MISC_INIT 677 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 678 select SYS_THUMB_BUILD 679 imply CMD_MTDPARTS 680 imply CRC32_VERIFY 681 imply FAT_WRITE 682 683config ARCH_SUNXI 684 bool "Support sunxi (Allwinner) SoCs" 685 select CMD_GPIO 686 select CMD_MMC if MMC 687 select CMD_USB if DISTRO_DEFAULTS 688 select DM 689 select DM_ETH 690 select DM_GPIO 691 select DM_KEYBOARD 692 select DM_SERIAL 693 select DM_USB if DISTRO_DEFAULTS 694 select OF_BOARD_SETUP 695 select OF_CONTROL 696 select OF_SEPARATE 697 select SPL_STACK_R if SPL 698 select SPL_SYS_MALLOC_SIMPLE if SPL 699 select SYS_NS16550 700 select SPL_SYS_THUMB_BUILD if !ARM64 701 select USB if DISTRO_DEFAULTS 702 select USB_STORAGE if DISTRO_DEFAULTS 703 select USB_KEYBOARD if DISTRO_DEFAULTS 704 select USE_TINY_PRINTF 705 imply CMD_GPT 706 imply FAT_WRITE 707 imply PRE_CONSOLE_BUFFER 708 imply SPL_GPIO_SUPPORT 709 imply SPL_LIBCOMMON_SUPPORT 710 imply SPL_LIBDISK_SUPPORT 711 imply SPL_LIBGENERIC_SUPPORT 712 imply SPL_MMC_SUPPORT if MMC 713 imply SPL_POWER_SUPPORT 714 imply SPL_SERIAL_SUPPORT 715 imply USB_GADGET 716 717config TARGET_TS4600 718 bool "Support TS4600" 719 select CPU_ARM926EJS 720 select SUPPORT_SPL 721 722config ARCH_VF610 723 bool "Freescale Vybrid" 724 select CPU_V7 725 select SYS_FSL_ERRATUM_ESDHC111 726 imply CMD_MTDPARTS 727 imply NAND 728 729config ARCH_ZYNQ 730 bool "Xilinx Zynq Platform" 731 select BOARD_LATE_INIT 732 select CPU_V7 733 select SUPPORT_SPL 734 select OF_CONTROL 735 select SPL_BOARD_INIT if SPL 736 select SPL_OF_CONTROL if SPL 737 select DM 738 select DM_ETH 739 select DM_GPIO 740 select SPL_DM if SPL 741 select DM_MMC 742 select DM_SPI 743 select DM_SERIAL 744 select DM_SPI_FLASH 745 select SPL_SEPARATE_BSS if SPL 746 select DM_USB if USB 747 select BLK 748 select CLK 749 select SPL_CLK 750 select CLK_ZYNQ 751 imply CMD_CLK 752 imply FAT_WRITE 753 imply CMD_SPL 754 755config ARCH_ZYNQMP 756 bool "Support Xilinx ZynqMP Platform" 757 select ARM64 758 select BOARD_LATE_INIT 759 select DM 760 select OF_CONTROL 761 select DM_SERIAL 762 select SUPPORT_SPL 763 select CLK 764 select SPL_BOARD_INIT if SPL 765 select SPL_CLK 766 select DM_USB if USB 767 imply FAT_WRITE 768 769config TEGRA 770 bool "NVIDIA Tegra" 771 imply FAT_WRITE 772 773config TARGET_VEXPRESS64_AEMV8A 774 bool "Support vexpress_aemv8a" 775 select ARM64 776 777config TARGET_VEXPRESS64_BASE_FVP 778 bool "Support Versatile Express ARMv8a FVP BASE model" 779 select ARM64 780 select SEMIHOSTING 781 782config TARGET_VEXPRESS64_BASE_FVP_DRAM 783 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 784 select ARM64 785 help 786 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 787 the default config to allow the user to load the images directly into 788 DRAM using model parameters rather than by using semi-hosting to load 789 the files from the host filesystem. 790 791config TARGET_VEXPRESS64_JUNO 792 bool "Support Versatile Express Juno Development Platform" 793 select ARM64 794 795config TARGET_LS2080A_EMU 796 bool "Support ls2080a_emu" 797 select ARCH_LS2080A 798 select ARM64 799 select ARMV8_MULTIENTRY 800 select ARCH_MISC_INIT 801 help 802 Support for Freescale LS2080A_EMU platform 803 The LS2080A Development System (EMULATOR) is a pre silicon 804 development platform that supports the QorIQ LS2080A 805 Layerscape Architecture processor. 806 807config TARGET_LS2080A_SIMU 808 bool "Support ls2080a_simu" 809 select ARCH_LS2080A 810 select ARM64 811 select ARMV8_MULTIENTRY 812 select ARCH_MISC_INIT 813 help 814 Support for Freescale LS2080A_SIMU platform 815 The LS2080A Development System (QDS) is a pre silicon 816 development platform that supports the QorIQ LS2080A 817 Layerscape Architecture processor. 818 819config TARGET_LS1088AQDS 820 bool "Support ls1088aqds" 821 select ARCH_LS1088A 822 select ARM64 823 select ARMV8_MULTIENTRY 824 select ARCH_MISC_INIT 825 select BOARD_LATE_INIT 826 help 827 Support for NXP LS1088AQDS platform 828 The LS1088A Development System (QDS) is a high-performance 829 development platform that supports the QorIQ LS1088A 830 Layerscape Architecture processor. 831 832config TARGET_LS2080AQDS 833 bool "Support ls2080aqds" 834 select ARCH_LS2080A 835 select ARM64 836 select ARMV8_MULTIENTRY 837 select BOARD_LATE_INIT 838 select SUPPORT_SPL 839 select ARCH_MISC_INIT 840 imply SCSI 841 help 842 Support for Freescale LS2080AQDS platform 843 The LS2080A Development System (QDS) is a high-performance 844 development platform that supports the QorIQ LS2080A 845 Layerscape Architecture processor. 846 847config TARGET_LS2080ARDB 848 bool "Support ls2080ardb" 849 select ARCH_LS2080A 850 select ARM64 851 select ARMV8_MULTIENTRY 852 select BOARD_LATE_INIT 853 select SUPPORT_SPL 854 select ARCH_MISC_INIT 855 imply SCSI 856 help 857 Support for Freescale LS2080ARDB platform. 858 The LS2080A Reference design board (RDB) is a high-performance 859 development platform that supports the QorIQ LS2080A 860 Layerscape Architecture processor. 861 862config TARGET_LS2081ARDB 863 bool "Support ls2081ardb" 864 select ARCH_LS2080A 865 select ARM64 866 select ARMV8_MULTIENTRY 867 select BOARD_LATE_INIT 868 select SUPPORT_SPL 869 select ARCH_MISC_INIT 870 help 871 Support for Freescale LS2081ARDB platform. 872 The LS2081A Reference design board (RDB) is a high-performance 873 development platform that supports the QorIQ LS2081A/LS2041A 874 Layerscape Architecture processor. 875 876config TARGET_HIKEY 877 bool "Support HiKey 96boards Consumer Edition Platform" 878 select ARM64 879 select DM 880 select DM_GPIO 881 select DM_SERIAL 882 select OF_CONTROL 883 help 884 Support for HiKey 96boards platform. It features a HI6220 885 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 886 887config TARGET_POPLAR 888 bool "Support Poplar 96boards Enterprise Edition Platform" 889 select ARM64 890 select DM 891 select OF_CONTROL 892 select DM_SERIAL 893 select DM_USB 894 help 895 Support for Poplar 96boards EE platform. It features a HI3798cv200 896 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 897 making it capable of running any commercial set-top solution based on 898 Linux or Android. 899 900config TARGET_LS1012AQDS 901 bool "Support ls1012aqds" 902 select ARCH_LS1012A 903 select ARM64 904 select BOARD_LATE_INIT 905 help 906 Support for Freescale LS1012AQDS platform. 907 The LS1012A Development System (QDS) is a high-performance 908 development platform that supports the QorIQ LS1012A 909 Layerscape Architecture processor. 910 911config TARGET_LS1012ARDB 912 bool "Support ls1012ardb" 913 select ARCH_LS1012A 914 select ARM64 915 select BOARD_LATE_INIT 916 imply SCSI 917 help 918 Support for Freescale LS1012ARDB platform. 919 The LS1012A Reference design board (RDB) is a high-performance 920 development platform that supports the QorIQ LS1012A 921 Layerscape Architecture processor. 922 923config TARGET_LS1012AFRDM 924 bool "Support ls1012afrdm" 925 select ARCH_LS1012A 926 select ARM64 927 help 928 Support for Freescale LS1012AFRDM platform. 929 The LS1012A Freedom board (FRDM) is a high-performance 930 development platform that supports the QorIQ LS1012A 931 Layerscape Architecture processor. 932 933config TARGET_LS1088ARDB 934 bool "Support ls1088ardb" 935 select ARCH_LS1088A 936 select ARM64 937 select ARMV8_MULTIENTRY 938 select ARCH_MISC_INIT 939 select BOARD_LATE_INIT 940 help 941 Support for NXP LS1088ARDB platform. 942 The LS1088A Reference design board (RDB) is a high-performance 943 development platform that supports the QorIQ LS1088A 944 Layerscape Architecture processor. 945 946config TARGET_LS1021AQDS 947 bool "Support ls1021aqds" 948 select BOARD_LATE_INIT 949 select CPU_V7 950 select CPU_V7_HAS_NONSEC 951 select CPU_V7_HAS_VIRT 952 select SUPPORT_SPL 953 select ARCH_LS1021A 954 select ARCH_SUPPORT_PSCI 955 select LS1_DEEP_SLEEP 956 select SYS_FSL_DDR 957 select BOARD_EARLY_INIT_F 958 imply SCSI 959 960config TARGET_LS1021ATWR 961 bool "Support ls1021atwr" 962 select BOARD_LATE_INIT 963 select CPU_V7 964 select CPU_V7_HAS_NONSEC 965 select CPU_V7_HAS_VIRT 966 select SUPPORT_SPL 967 select ARCH_LS1021A 968 select ARCH_SUPPORT_PSCI 969 select LS1_DEEP_SLEEP 970 select BOARD_EARLY_INIT_F 971 imply SCSI 972 973config TARGET_LS1021AIOT 974 bool "Support ls1021aiot" 975 select BOARD_LATE_INIT 976 select CPU_V7 977 select CPU_V7_HAS_NONSEC 978 select CPU_V7_HAS_VIRT 979 select SUPPORT_SPL 980 select ARCH_LS1021A 981 select ARCH_SUPPORT_PSCI 982 imply SCSI 983 help 984 Support for Freescale LS1021AIOT platform. 985 The LS1021A Freescale board (IOT) is a high-performance 986 development platform that supports the QorIQ LS1021A 987 Layerscape Architecture processor. 988 989config TARGET_LS1043AQDS 990 bool "Support ls1043aqds" 991 select ARCH_LS1043A 992 select ARM64 993 select ARMV8_MULTIENTRY 994 select BOARD_LATE_INIT 995 select SUPPORT_SPL 996 select BOARD_EARLY_INIT_F 997 imply SCSI 998 help 999 Support for Freescale LS1043AQDS platform. 1000 1001config TARGET_LS1043ARDB 1002 bool "Support ls1043ardb" 1003 select ARCH_LS1043A 1004 select ARM64 1005 select ARMV8_MULTIENTRY 1006 select BOARD_LATE_INIT 1007 select SUPPORT_SPL 1008 select BOARD_EARLY_INIT_F 1009 imply SCSI 1010 help 1011 Support for Freescale LS1043ARDB platform. 1012 1013config TARGET_LS1046AQDS 1014 bool "Support ls1046aqds" 1015 select ARCH_LS1046A 1016 select ARM64 1017 select ARMV8_MULTIENTRY 1018 select BOARD_LATE_INIT 1019 select SUPPORT_SPL 1020 select DM_SPI_FLASH if DM_SPI 1021 select BOARD_EARLY_INIT_F 1022 imply SCSI 1023 help 1024 Support for Freescale LS1046AQDS platform. 1025 The LS1046A Development System (QDS) is a high-performance 1026 development platform that supports the QorIQ LS1046A 1027 Layerscape Architecture processor. 1028 1029config TARGET_LS1046ARDB 1030 bool "Support ls1046ardb" 1031 select ARCH_LS1046A 1032 select ARM64 1033 select ARMV8_MULTIENTRY 1034 select BOARD_LATE_INIT 1035 select SUPPORT_SPL 1036 select DM_SPI_FLASH if DM_SPI 1037 select POWER_MC34VR500 1038 select BOARD_EARLY_INIT_F 1039 imply SCSI 1040 help 1041 Support for Freescale LS1046ARDB platform. 1042 The LS1046A Reference Design Board (RDB) is a high-performance 1043 development platform that supports the QorIQ LS1046A 1044 Layerscape Architecture processor. 1045 1046config TARGET_H2200 1047 bool "Support h2200" 1048 select CPU_PXA 1049 1050config TARGET_ZIPITZ2 1051 bool "Support zipitz2" 1052 select CPU_PXA 1053 1054config TARGET_COLIBRI_PXA270 1055 bool "Support colibri_pxa270" 1056 select CPU_PXA 1057 1058config ARCH_UNIPHIER 1059 bool "Socionext UniPhier SoCs" 1060 select BOARD_LATE_INIT 1061 select DM 1062 select DM_GPIO 1063 select DM_I2C 1064 select DM_MMC 1065 select DM_RESET 1066 select DM_SERIAL 1067 select DM_USB 1068 select OF_CONTROL 1069 select OF_LIBFDT 1070 select PINCTRL 1071 select SPL_BOARD_INIT if SPL 1072 select SPL_DM if SPL 1073 select SPL_LIBCOMMON_SUPPORT if SPL 1074 select SPL_LIBGENERIC_SUPPORT if SPL 1075 select SPL_OF_CONTROL if SPL 1076 select SPL_PINCTRL if SPL 1077 select SUPPORT_SPL 1078 imply FAT_WRITE 1079 help 1080 Support for UniPhier SoC family developed by Socionext Inc. 1081 (formerly, System LSI Business Division of Panasonic Corporation) 1082 1083config STM32 1084 bool "Support STM32" 1085 select CPU_V7M 1086 select DM 1087 select DM_SERIAL 1088 select SYS_THUMB_BUILD 1089 1090config ARCH_STI 1091 bool "Support STMicrolectronics SoCs" 1092 select CPU_V7 1093 select DM 1094 select DM_SERIAL 1095 select BLK 1096 select DM_MMC 1097 select DM_RESET 1098 help 1099 Support for STMicroelectronics STiH407/10 SoC family. 1100 This SoC is used on Linaro 96Board STiH410-B2260 1101 1102config ARCH_ROCKCHIP 1103 bool "Support Rockchip SoCs" 1104 select OF_CONTROL 1105 select BLK 1106 select DM 1107 select SPL_DM if SPL 1108 select SYS_MALLOC_F 1109 select SYS_THUMB_BUILD if !ARM64 1110 select SPL_SYS_MALLOC_SIMPLE if SPL 1111 select DM_GPIO 1112 select DM_I2C 1113 select DM_MMC 1114 select DM_SERIAL 1115 select DM_SPI 1116 select DM_SPI_FLASH 1117 select DM_USB if USB 1118 select DM_PWM 1119 select DM_REGULATOR 1120 imply CMD_FASTBOOT 1121 imply FASTBOOT 1122 imply FAT_WRITE 1123 imply USB_FUNCTION_FASTBOOT 1124 imply SPL_SYSRESET 1125 imply TPL_SYSRESET 1126 imply ADC 1127 imply SARADC_ROCKCHIP 1128 1129config TARGET_THUNDERX_88XX 1130 bool "Support ThunderX 88xx" 1131 select ARM64 1132 select OF_CONTROL 1133 select SYS_CACHE_SHIFT_7 1134 1135config ARCH_ASPEED 1136 bool "Support Aspeed SoCs" 1137 select OF_CONTROL 1138 select DM 1139 1140endchoice 1141 1142source "arch/arm/mach-aspeed/Kconfig" 1143 1144source "arch/arm/mach-at91/Kconfig" 1145 1146source "arch/arm/mach-bcm283x/Kconfig" 1147 1148source "arch/arm/mach-davinci/Kconfig" 1149 1150source "arch/arm/mach-exynos/Kconfig" 1151 1152source "arch/arm/mach-highbank/Kconfig" 1153 1154source "arch/arm/mach-integrator/Kconfig" 1155 1156source "arch/arm/mach-keystone/Kconfig" 1157 1158source "arch/arm/mach-kirkwood/Kconfig" 1159 1160source "arch/arm/mach-mvebu/Kconfig" 1161 1162source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1163 1164source "arch/arm/mach-imx/mx7ulp/Kconfig" 1165 1166source "arch/arm/mach-imx/mx7/Kconfig" 1167 1168source "arch/arm/mach-imx/mx6/Kconfig" 1169 1170source "arch/arm/mach-imx/mx5/Kconfig" 1171 1172source "arch/arm/mach-omap2/Kconfig" 1173 1174source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1175 1176source "arch/arm/mach-orion5x/Kconfig" 1177 1178source "arch/arm/mach-rmobile/Kconfig" 1179 1180source "arch/arm/mach-meson/Kconfig" 1181 1182source "arch/arm/mach-qemu/Kconfig" 1183 1184source "arch/arm/mach-rockchip/Kconfig" 1185 1186source "arch/arm/mach-s5pc1xx/Kconfig" 1187 1188source "arch/arm/mach-snapdragon/Kconfig" 1189 1190source "arch/arm/mach-socfpga/Kconfig" 1191 1192source "arch/arm/mach-sti/Kconfig" 1193 1194source "arch/arm/mach-stm32/Kconfig" 1195 1196source "arch/arm/mach-sunxi/Kconfig" 1197 1198source "arch/arm/mach-tegra/Kconfig" 1199 1200source "arch/arm/mach-uniphier/Kconfig" 1201 1202source "arch/arm/cpu/armv7/vf610/Kconfig" 1203 1204source "arch/arm/mach-zynq/Kconfig" 1205 1206source "arch/arm/cpu/armv7/Kconfig" 1207 1208source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1209 1210source "arch/arm/cpu/armv8/Kconfig" 1211 1212source "arch/arm/mach-imx/Kconfig" 1213 1214source "board/aries/m28evk/Kconfig" 1215source "board/bosch/shc/Kconfig" 1216source "board/CarMediaLab/flea3/Kconfig" 1217source "board/Marvell/aspenite/Kconfig" 1218source "board/Marvell/gplugd/Kconfig" 1219source "board/armadeus/apf27/Kconfig" 1220source "board/armltd/vexpress/Kconfig" 1221source "board/armltd/vexpress64/Kconfig" 1222source "board/bluegiga/apx4devkit/Kconfig" 1223source "board/broadcom/bcm23550_w1d/Kconfig" 1224source "board/broadcom/bcm28155_ap/Kconfig" 1225source "board/broadcom/bcmcygnus/Kconfig" 1226source "board/broadcom/bcmnsp/Kconfig" 1227source "board/broadcom/bcmns2/Kconfig" 1228source "board/cavium/thunderx/Kconfig" 1229source "board/cirrus/edb93xx/Kconfig" 1230source "board/creative/xfi3/Kconfig" 1231source "board/freescale/ls2080a/Kconfig" 1232source "board/freescale/ls2080aqds/Kconfig" 1233source "board/freescale/ls2080ardb/Kconfig" 1234source "board/freescale/ls1088a/Kconfig" 1235source "board/freescale/ls1021aqds/Kconfig" 1236source "board/freescale/ls1043aqds/Kconfig" 1237source "board/freescale/ls1021atwr/Kconfig" 1238source "board/freescale/ls1021aiot/Kconfig" 1239source "board/freescale/ls1046aqds/Kconfig" 1240source "board/freescale/ls1043ardb/Kconfig" 1241source "board/freescale/ls1046ardb/Kconfig" 1242source "board/freescale/ls1012aqds/Kconfig" 1243source "board/freescale/ls1012ardb/Kconfig" 1244source "board/freescale/ls1012afrdm/Kconfig" 1245source "board/freescale/mx23evk/Kconfig" 1246source "board/freescale/mx25pdk/Kconfig" 1247source "board/freescale/mx28evk/Kconfig" 1248source "board/freescale/mx31ads/Kconfig" 1249source "board/freescale/mx31pdk/Kconfig" 1250source "board/freescale/mx35pdk/Kconfig" 1251source "board/freescale/s32v234evb/Kconfig" 1252source "board/gdsys/a38x/Kconfig" 1253source "board/grinn/chiliboard/Kconfig" 1254source "board/gumstix/pepper/Kconfig" 1255source "board/h2200/Kconfig" 1256source "board/hisilicon/hikey/Kconfig" 1257source "board/hisilicon/poplar/Kconfig" 1258source "board/imx31_phycore/Kconfig" 1259source "board/isee/igep003x/Kconfig" 1260source "board/olimex/mx23_olinuxino/Kconfig" 1261source "board/phytec/pcm051/Kconfig" 1262source "board/ppcag/bg0900/Kconfig" 1263source "board/sandisk/sansa_fuze_plus/Kconfig" 1264source "board/schulercontrol/sc_sps_1/Kconfig" 1265source "board/silica/pengwyn/Kconfig" 1266source "board/spear/spear300/Kconfig" 1267source "board/spear/spear310/Kconfig" 1268source "board/spear/spear320/Kconfig" 1269source "board/spear/spear600/Kconfig" 1270source "board/spear/x600/Kconfig" 1271source "board/st/stv0991/Kconfig" 1272source "board/syteco/zmx25/Kconfig" 1273source "board/tcl/sl50/Kconfig" 1274source "board/birdland/bav335x/Kconfig" 1275source "board/timll/devkit3250/Kconfig" 1276source "board/toradex/colibri_pxa270/Kconfig" 1277source "board/technologic/ts4600/Kconfig" 1278source "board/vscom/baltos/Kconfig" 1279source "board/woodburn/Kconfig" 1280source "board/work-microwave/work_92105/Kconfig" 1281source "board/zipitz2/Kconfig" 1282 1283source "arch/arm/Kconfig.debug" 1284 1285endmenu 1286 1287config SPL_LDSCRIPT 1288 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 1289 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1290 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1291 1292 1293