1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# If set, the workarounds for these ARM errata are applied early during U-Boot 23# startup. Note that in general these options force the workarounds to be 24# applied; no CPU-type/version detection exists, unlike the similar options in 25# the Linux kernel. Do not set these options unless they apply! Also note that 26# the following can be machine specific errata. These do have ability to 27# provide rudimentary version and machine specific checks, but expect no 28# product checks: 29# CONFIG_ARM_ERRATA_430973 30# CONFIG_ARM_ERRATA_454179 31# CONFIG_ARM_ERRATA_621766 32# CONFIG_ARM_ERRATA_798870 33# CONFIG_ARM_ERRATA_801819 34config ARM_ERRATA_430973 35 bool 36 37config ARM_ERRATA_454179 38 bool 39 40config ARM_ERRATA_621766 41 bool 42 43config ARM_ERRATA_716044 44 bool 45 46config ARM_ERRATA_725233 47 bool 48 49config ARM_ERRATA_742230 50 bool 51 52config ARM_ERRATA_743622 53 bool 54 55config ARM_ERRATA_751472 56 bool 57 58config ARM_ERRATA_761320 59 bool 60 61config ARM_ERRATA_773022 62 bool 63 64config ARM_ERRATA_774769 65 bool 66 67config ARM_ERRATA_794072 68 bool 69 70config ARM_ERRATA_798870 71 bool 72 73config ARM_ERRATA_801819 74 bool 75 76config ARM_ERRATA_826974 77 bool 78 79config ARM_ERRATA_828024 80 bool 81 82config ARM_ERRATA_829520 83 bool 84 85config ARM_ERRATA_833069 86 bool 87 88config ARM_ERRATA_833471 89 bool 90 91config ARM_ERRATA_852421 92 bool 93 94config ARM_ERRATA_852423 95 bool 96 97config CPU_ARM720T 98 bool 99 select SYS_CACHE_SHIFT_5 100 101config CPU_ARM920T 102 bool 103 select SYS_CACHE_SHIFT_5 104 105config CPU_ARM926EJS 106 bool 107 select SYS_CACHE_SHIFT_5 108 109config CPU_ARM946ES 110 bool 111 select SYS_CACHE_SHIFT_5 112 113config CPU_ARM1136 114 bool 115 select SYS_CACHE_SHIFT_5 116 117config CPU_ARM1176 118 bool 119 select HAS_VBAR 120 select SYS_CACHE_SHIFT_5 121 122config CPU_V7 123 bool 124 select HAS_VBAR 125 select HAS_THUMB2 126 select SYS_CACHE_SHIFT_6 127 128config CPU_V7M 129 bool 130 select HAS_THUMB2 131 select SYS_CACHE_SHIFT_5 132 133config CPU_PXA 134 bool 135 select SYS_CACHE_SHIFT_5 136 137config CPU_SA1100 138 bool 139 select SYS_CACHE_SHIFT_5 140 141config SYS_CPU 142 default "arm720t" if CPU_ARM720T 143 default "arm920t" if CPU_ARM920T 144 default "arm926ejs" if CPU_ARM926EJS 145 default "arm946es" if CPU_ARM946ES 146 default "arm1136" if CPU_ARM1136 147 default "arm1176" if CPU_ARM1176 148 default "armv7" if CPU_V7 149 default "armv7m" if CPU_V7M 150 default "pxa" if CPU_PXA 151 default "sa1100" if CPU_SA1100 152 default "armv8" if ARM64 153 154config SYS_ARM_ARCH 155 int 156 default 4 if CPU_ARM720T 157 default 4 if CPU_ARM920T 158 default 5 if CPU_ARM926EJS 159 default 5 if CPU_ARM946ES 160 default 6 if CPU_ARM1136 161 default 6 if CPU_ARM1176 162 default 7 if CPU_V7 163 default 7 if CPU_V7M 164 default 5 if CPU_PXA 165 default 4 if CPU_SA1100 166 default 8 if ARM64 167 168config SYS_CACHE_SHIFT_5 169 bool 170 171config SYS_CACHE_SHIFT_6 172 bool 173 174config SYS_CACHE_SHIFT_7 175 bool 176 177config SYS_CACHELINE_SIZE 178 int 179 default 128 if SYS_CACHE_SHIFT_7 180 default 64 if SYS_CACHE_SHIFT_6 181 default 32 if SYS_CACHE_SHIFT_5 182 183config ARM_SMCCC 184 bool "Support for ARM SMC Calling Convention (SMCCC)" 185 depends on CPU_V7 || ARM64 186 select ARM_PSCI_FW 187 help 188 Say Y here if you want to enable ARM SMC Calling Convention. 189 This should be enabled if U-Boot needs to communicate with system 190 firmware (for example, PSCI) according to SMCCC. 191 192config SEMIHOSTING 193 bool "support boot from semihosting" 194 help 195 In emulated environments, semihosting is a way for 196 the hosted environment to call out to the emulator to 197 retrieve files from the host machine. 198 199config SYS_THUMB_BUILD 200 bool "Build U-Boot using the Thumb instruction set" 201 depends on !ARM64 202 help 203 Use this flag to build U-Boot using the Thumb instruction set for 204 ARM architectures. Thumb instruction set provides better code 205 density. For ARM architectures that support Thumb2 this flag will 206 result in Thumb2 code generated by GCC. 207 208config SPL_SYS_THUMB_BUILD 209 bool "Build SPL using the Thumb instruction set" 210 default y if SYS_THUMB_BUILD 211 depends on !ARM64 212 help 213 Use this flag to build SPL using the Thumb instruction set for 214 ARM architectures. Thumb instruction set provides better code 215 density. For ARM architectures that support Thumb2 this flag will 216 result in Thumb2 code generated by GCC. 217 218config SYS_L2CACHE_OFF 219 bool "L2cache off" 220 help 221 If SoC does not support L2CACHE or one do not want to enable 222 L2CACHE, choose this option. 223 224config ENABLE_ARM_SOC_BOOT0_HOOK 225 bool "prepare BOOT0 header" 226 help 227 If the SoC's BOOT0 requires a header area filled with (magic) 228 values, then choose this option, and create a define called 229 ARM_SOC_BOOT0_HOOK which contains the required assembler 230 preprocessor code. 231 232config ARM_CORTEX_CPU_IS_UP 233 bool 234 default n 235 236config USE_ARCH_MEMCPY 237 bool "Use an assembly optimized implementation of memcpy" 238 default y 239 depends on !ARM64 240 help 241 Enable the generation of an optimized version of memcpy. 242 Such implementation may be faster under some conditions 243 but may increase the binary size. 244 245config SPL_USE_ARCH_MEMCPY 246 bool "Use an assembly optimized implementation of memcpy" 247 default y if USE_ARCH_MEMCPY 248 depends on !ARM64 249 help 250 Enable the generation of an optimized version of memcpy. 251 Such implementation may be faster under some conditions 252 but may increase the binary size. 253 254config USE_ARCH_MEMSET 255 bool "Use an assembly optimized implementation of memset" 256 default y 257 depends on !ARM64 258 help 259 Enable the generation of an optimized version of memset. 260 Such implementation may be faster under some conditions 261 but may increase the binary size. 262 263config SPL_USE_ARCH_MEMSET 264 bool "Use an assembly optimized implementation of memset" 265 default y if USE_ARCH_MEMSET 266 depends on !ARM64 267 help 268 Enable the generation of an optimized version of memset. 269 Such implementation may be faster under some conditions 270 but may increase the binary size. 271 272config ARM64_SUPPORT_AARCH32 273 bool "ARM64 system support AArch32 execution state" 274 default y if ARM64 && !TARGET_THUNDERX_88XX 275 help 276 This ARM64 system supports AArch32 execution state. 277 278choice 279 prompt "Target select" 280 default TARGET_HIKEY 281 282config ARCH_AT91 283 bool "Atmel AT91" 284 select SPL_BOARD_INIT if SPL 285 286config TARGET_EDB93XX 287 bool "Support edb93xx" 288 select CPU_ARM920T 289 290config TARGET_ASPENITE 291 bool "Support aspenite" 292 select CPU_ARM926EJS 293 294config TARGET_GPLUGD 295 bool "Support gplugd" 296 select CPU_ARM926EJS 297 298config ARCH_DAVINCI 299 bool "TI DaVinci" 300 select CPU_ARM926EJS 301 help 302 Support for TI's DaVinci platform. 303 304config KIRKWOOD 305 bool "Marvell Kirkwood" 306 select CPU_ARM926EJS 307 select BOARD_EARLY_INIT_F 308 select ARCH_MISC_INIT 309 310config ARCH_MVEBU 311 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 312 select OF_CONTROL 313 select OF_SEPARATE 314 select DM 315 select DM_ETH 316 select DM_SERIAL 317 select DM_SPI 318 select DM_SPI_FLASH 319 320config TARGET_DEVKIT3250 321 bool "Support devkit3250" 322 select CPU_ARM926EJS 323 select SUPPORT_SPL 324 325config TARGET_WORK_92105 326 bool "Support work_92105" 327 select CPU_ARM926EJS 328 select SUPPORT_SPL 329 330config TARGET_MX25PDK 331 bool "Support mx25pdk" 332 select BOARD_LATE_INIT 333 select CPU_ARM926EJS 334 select BOARD_EARLY_INIT_F 335 336config TARGET_ZMX25 337 bool "Support zmx25" 338 select BOARD_LATE_INIT 339 select CPU_ARM926EJS 340 341config TARGET_APF27 342 bool "Support apf27" 343 select CPU_ARM926EJS 344 select SUPPORT_SPL 345 346config TARGET_APX4DEVKIT 347 bool "Support apx4devkit" 348 select CPU_ARM926EJS 349 select SUPPORT_SPL 350 351config TARGET_XFI3 352 bool "Support xfi3" 353 select CPU_ARM926EJS 354 select SUPPORT_SPL 355 356config TARGET_M28EVK 357 bool "Support m28evk" 358 select CPU_ARM926EJS 359 select SUPPORT_SPL 360 361config TARGET_MX23EVK 362 bool "Support mx23evk" 363 select CPU_ARM926EJS 364 select SUPPORT_SPL 365 select BOARD_EARLY_INIT_F 366 367config TARGET_MX28EVK 368 bool "Support mx28evk" 369 select CPU_ARM926EJS 370 select SUPPORT_SPL 371 select BOARD_EARLY_INIT_F 372 373config TARGET_MX23_OLINUXINO 374 bool "Support mx23_olinuxino" 375 select CPU_ARM926EJS 376 select SUPPORT_SPL 377 select BOARD_EARLY_INIT_F 378 379config TARGET_BG0900 380 bool "Support bg0900" 381 select CPU_ARM926EJS 382 select SUPPORT_SPL 383 384config TARGET_SANSA_FUZE_PLUS 385 bool "Support sansa_fuze_plus" 386 select CPU_ARM926EJS 387 select SUPPORT_SPL 388 389config TARGET_SC_SPS_1 390 bool "Support sc_sps_1" 391 select CPU_ARM926EJS 392 select SUPPORT_SPL 393 394config ORION5X 395 bool "Marvell Orion" 396 select CPU_ARM926EJS 397 398config TARGET_SPEAR300 399 bool "Support spear300" 400 select CPU_ARM926EJS 401 select BOARD_EARLY_INIT_F 402 403config TARGET_SPEAR310 404 bool "Support spear310" 405 select CPU_ARM926EJS 406 select BOARD_EARLY_INIT_F 407 408config TARGET_SPEAR320 409 bool "Support spear320" 410 select CPU_ARM926EJS 411 select BOARD_EARLY_INIT_F 412 413config TARGET_SPEAR600 414 bool "Support spear600" 415 select CPU_ARM926EJS 416 select BOARD_EARLY_INIT_F 417 418config TARGET_STV0991 419 bool "Support stv0991" 420 select CPU_V7 421 select DM 422 select DM_SERIAL 423 select DM_SPI 424 select DM_SPI_FLASH 425 select SPI_FLASH 426 427config TARGET_X600 428 bool "Support x600" 429 select BOARD_LATE_INIT 430 select CPU_ARM926EJS 431 select SUPPORT_SPL 432 433config TARGET_IMX31_PHYCORE 434 bool "Support imx31_phycore_eet" 435 select CPU_ARM1136 436 select BOARD_EARLY_INIT_F 437 438config TARGET_IMX31_PHYCORE_EET 439 bool "Support imx31_phycore_eet" 440 select BOARD_LATE_INIT 441 select CPU_ARM1136 442 select BOARD_EARLY_INIT_F 443 444config TARGET_MX31ADS 445 bool "Support mx31ads" 446 select CPU_ARM1136 447 select BOARD_EARLY_INIT_F 448 449config TARGET_MX31PDK 450 bool "Support mx31pdk" 451 select BOARD_LATE_INIT 452 select CPU_ARM1136 453 select SUPPORT_SPL 454 select BOARD_EARLY_INIT_F 455 456config TARGET_WOODBURN 457 bool "Support woodburn" 458 select CPU_ARM1136 459 460config TARGET_WOODBURN_SD 461 bool "Support woodburn_sd" 462 select CPU_ARM1136 463 select SUPPORT_SPL 464 465config TARGET_FLEA3 466 bool "Support flea3" 467 select CPU_ARM1136 468 469config TARGET_MX35PDK 470 bool "Support mx35pdk" 471 select BOARD_LATE_INIT 472 select CPU_ARM1136 473 474config ARCH_BCM283X 475 bool "Broadcom BCM283X family" 476 select DM 477 select DM_SERIAL 478 select DM_GPIO 479 select OF_CONTROL 480 imply FAT_WRITE 481 482config TARGET_VEXPRESS_CA15_TC2 483 bool "Support vexpress_ca15_tc2" 484 select CPU_V7 485 select CPU_V7_HAS_NONSEC 486 select CPU_V7_HAS_VIRT 487 488config TARGET_VEXPRESS_CA5X2 489 bool "Support vexpress_ca5x2" 490 select CPU_V7 491 492config TARGET_VEXPRESS_CA9X4 493 bool "Support vexpress_ca9x4" 494 select CPU_V7 495 496config TARGET_BCM23550_W1D 497 bool "Support bcm23550_w1d" 498 select CPU_V7 499 imply CRC32_VERIFY 500 imply FAT_WRITE 501 502config TARGET_BCM28155_AP 503 bool "Support bcm28155_ap" 504 select CPU_V7 505 imply CRC32_VERIFY 506 imply FAT_WRITE 507 508config TARGET_BCMCYGNUS 509 bool "Support bcmcygnus" 510 select CPU_V7 511 imply CRC32_VERIFY 512 imply CMD_HASH 513 imply FAT_WRITE 514 imply HASH_VERIFY 515 516config TARGET_BCMNSP 517 bool "Support bcmnsp" 518 select CPU_V7 519 520config TARGET_BCMNS2 521 bool "Support Broadcom Northstar2" 522 select ARM64 523 help 524 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 525 ARMv8 Cortex-A57 processors targeting a broad range of networking 526 applications 527 528config ARCH_EXYNOS 529 bool "Samsung EXYNOS" 530 select DM 531 select DM_I2C 532 select DM_SPI_FLASH 533 select DM_SERIAL 534 select DM_SPI 535 select DM_GPIO 536 select DM_KEYBOARD 537 imply FAT_WRITE 538 539config ARCH_S5PC1XX 540 bool "Samsung S5PC1XX" 541 select CPU_V7 542 select DM 543 select DM_SERIAL 544 select DM_GPIO 545 select DM_I2C 546 547config ARCH_HIGHBANK 548 bool "Calxeda Highbank" 549 select CPU_V7 550 551config ARCH_INTEGRATOR 552 bool "ARM Ltd. Integrator family" 553 select DM 554 select DM_SERIAL 555 556config ARCH_KEYSTONE 557 bool "TI Keystone" 558 select CPU_V7 559 select SUPPORT_SPL 560 select SYS_THUMB_BUILD 561 select CMD_POWEROFF 562 imply FIT 563 564config ARCH_OMAP2PLUS 565 bool "TI OMAP2+" 566 select CPU_V7 567 select SPL_BOARD_INIT if SPL 568 select SUPPORT_SPL 569 imply FIT 570 571config ARCH_MESON 572 bool "Amlogic Meson" 573 help 574 Support for the Meson SoC family developed by Amlogic Inc., 575 targeted at media players and tablet computers. We currently 576 support the S905 (GXBaby) 64-bit SoC. 577 578config ARCH_MX7ULP 579 bool "NXP MX7ULP" 580 select CPU_V7 581 select ROM_UNIFIED_SECTIONS 582 583config ARCH_MX7 584 bool "Freescale MX7" 585 select CPU_V7 586 select SYS_FSL_HAS_SEC if SECURE_BOOT 587 select SYS_FSL_SEC_COMPAT_4 588 select SYS_FSL_SEC_LE 589 select BOARD_EARLY_INIT_F 590 select ARCH_MISC_INIT 591 592config ARCH_MX6 593 bool "Freescale MX6" 594 select CPU_V7 595 select SYS_FSL_HAS_SEC if SECURE_BOOT 596 select SYS_FSL_SEC_COMPAT_4 597 select SYS_FSL_SEC_LE 598 select SYS_THUMB_BUILD if SPL 599 600config ARCH_MX5 601 bool "Freescale MX5" 602 select CPU_V7 603 select BOARD_EARLY_INIT_F 604 605config ARCH_RMOBILE 606 bool "Renesas ARM SoCs" 607 select DM 608 select DM_SERIAL 609 select BOARD_EARLY_INIT_F 610 imply FAT_WRITE 611 imply SYS_THUMB_BUILD 612 613config TARGET_S32V234EVB 614 bool "Support s32v234evb" 615 select ARM64 616 select SYS_FSL_ERRATUM_ESDHC111 617 618config ARCH_SNAPDRAGON 619 bool "Qualcomm Snapdragon SoCs" 620 select ARM64 621 select DM 622 select DM_GPIO 623 select DM_SERIAL 624 select SPMI 625 select OF_CONTROL 626 select OF_SEPARATE 627 628config ARCH_SOCFPGA 629 bool "Altera SOCFPGA family" 630 select CPU_V7 631 select SUPPORT_SPL 632 select OF_CONTROL 633 select SPL_OF_CONTROL 634 select DM 635 select DM_SPI_FLASH 636 select DM_SPI 637 select ENABLE_ARM_SOC_BOOT0_HOOK 638 select ARCH_EARLY_INIT_R 639 select ARCH_MISC_INIT 640 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 641 select SYS_THUMB_BUILD 642 imply CRC32_VERIFY 643 imply FAT_WRITE 644 645config ARCH_SUNXI 646 bool "Support sunxi (Allwinner) SoCs" 647 select CMD_GPIO 648 select CMD_MMC if MMC 649 select CMD_USB if DISTRO_DEFAULTS 650 select DM 651 select DM_ETH 652 select DM_GPIO 653 select DM_KEYBOARD 654 select DM_SERIAL 655 select DM_USB if DISTRO_DEFAULTS 656 select OF_BOARD_SETUP 657 select OF_CONTROL 658 select OF_SEPARATE 659 select SPL_STACK_R if SUPPORT_SPL 660 select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL 661 select SYS_NS16550 662 select SPL_SYS_THUMB_BUILD if !ARM64 663 select USB if DISTRO_DEFAULTS 664 select USB_STORAGE if DISTRO_DEFAULTS 665 select USB_KEYBOARD if DISTRO_DEFAULTS 666 select USE_TINY_PRINTF 667 imply FAT_WRITE 668 imply PRE_CONSOLE_BUFFER 669 imply SPL_GPIO_SUPPORT 670 imply SPL_LIBCOMMON_SUPPORT 671 imply SPL_LIBDISK_SUPPORT 672 imply SPL_LIBGENERIC_SUPPORT 673 imply SPL_MMC_SUPPORT if MMC 674 imply SPL_POWER_SUPPORT 675 imply SPL_SERIAL_SUPPORT 676 677config TARGET_TS4600 678 bool "Support TS4600" 679 select CPU_ARM926EJS 680 select SUPPORT_SPL 681 682config ARCH_VF610 683 bool "Freescale Vybrid" 684 select CPU_V7 685 select SYS_FSL_ERRATUM_ESDHC111 686 687config ARCH_ZYNQ 688 bool "Xilinx Zynq Platform" 689 select BOARD_LATE_INIT 690 select CPU_V7 691 select SUPPORT_SPL 692 select OF_CONTROL 693 select SPL_BOARD_INIT if SPL 694 select SPL_OF_CONTROL if SPL 695 select DM 696 select DM_ETH 697 select DM_GPIO 698 select SPL_DM if SPL 699 select DM_MMC 700 select DM_MMC_OPS 701 select DM_SPI 702 select DM_SERIAL 703 select DM_SPI_FLASH 704 select SPL_SEPARATE_BSS if SPL 705 select DM_USB if USB 706 select BLK 707 select CLK 708 select SPL_CLK 709 select CLK_ZYNQ 710 imply CMD_CLK 711 imply FAT_WRITE 712 713config ARCH_ZYNQMP 714 bool "Support Xilinx ZynqMP Platform" 715 select ARM64 716 select BOARD_LATE_INIT 717 select DM 718 select OF_CONTROL 719 select DM_SERIAL 720 select SUPPORT_SPL 721 select CLK 722 select SPL_BOARD_INIT if SPL 723 select SPL_CLK 724 select DM_USB if USB 725 imply FAT_WRITE 726 727config TEGRA 728 bool "NVIDIA Tegra" 729 imply FAT_WRITE 730 731config TARGET_VEXPRESS64_AEMV8A 732 bool "Support vexpress_aemv8a" 733 select ARM64 734 735config TARGET_VEXPRESS64_BASE_FVP 736 bool "Support Versatile Express ARMv8a FVP BASE model" 737 select ARM64 738 select SEMIHOSTING 739 740config TARGET_VEXPRESS64_BASE_FVP_DRAM 741 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 742 select ARM64 743 help 744 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 745 the default config to allow the user to load the images directly into 746 DRAM using model parameters rather than by using semi-hosting to load 747 the files from the host filesystem. 748 749config TARGET_VEXPRESS64_JUNO 750 bool "Support Versatile Express Juno Development Platform" 751 select ARM64 752 753config TARGET_LS2080A_EMU 754 bool "Support ls2080a_emu" 755 select ARCH_LS2080A 756 select ARM64 757 select ARMV8_MULTIENTRY 758 select ARCH_MISC_INIT 759 help 760 Support for Freescale LS2080A_EMU platform 761 The LS2080A Development System (EMULATOR) is a pre silicon 762 development platform that supports the QorIQ LS2080A 763 Layerscape Architecture processor. 764 765config TARGET_LS2080A_SIMU 766 bool "Support ls2080a_simu" 767 select ARCH_LS2080A 768 select ARM64 769 select ARMV8_MULTIENTRY 770 select ARCH_MISC_INIT 771 help 772 Support for Freescale LS2080A_SIMU platform 773 The LS2080A Development System (QDS) is a pre silicon 774 development platform that supports the QorIQ LS2080A 775 Layerscape Architecture processor. 776 777config TARGET_LS2080AQDS 778 bool "Support ls2080aqds" 779 select ARCH_LS2080A 780 select ARM64 781 select ARMV8_MULTIENTRY 782 select BOARD_LATE_INIT 783 select SUPPORT_SPL 784 select ARCH_MISC_INIT 785 help 786 Support for Freescale LS2080AQDS platform 787 The LS2080A Development System (QDS) is a high-performance 788 development platform that supports the QorIQ LS2080A 789 Layerscape Architecture processor. 790 791config TARGET_LS2080ARDB 792 bool "Support ls2080ardb" 793 select ARCH_LS2080A 794 select ARM64 795 select ARMV8_MULTIENTRY 796 select BOARD_LATE_INIT 797 select SUPPORT_SPL 798 select ARCH_MISC_INIT 799 help 800 Support for Freescale LS2080ARDB platform. 801 The LS2080A Reference design board (RDB) is a high-performance 802 development platform that supports the QorIQ LS2080A 803 Layerscape Architecture processor. 804 805config TARGET_LS2081ARDB 806 bool "Support ls2081ardb" 807 select ARCH_LS2080A 808 select ARM64 809 select ARMV8_MULTIENTRY 810 select BOARD_LATE_INIT 811 select SUPPORT_SPL 812 select ARCH_MISC_INIT 813 help 814 Support for Freescale LS2081ARDB platform. 815 The LS2081A Reference design board (RDB) is a high-performance 816 development platform that supports the QorIQ LS2081A/LS2041A 817 Layerscape Architecture processor. 818 819config TARGET_HIKEY 820 bool "Support HiKey 96boards Consumer Edition Platform" 821 select ARM64 822 select DM 823 select DM_GPIO 824 select DM_SERIAL 825 select OF_CONTROL 826 help 827 Support for HiKey 96boards platform. It features a HI6220 828 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 829 830config TARGET_LS1012AQDS 831 bool "Support ls1012aqds" 832 select ARCH_LS1012A 833 select ARM64 834 select BOARD_LATE_INIT 835 help 836 Support for Freescale LS1012AQDS platform. 837 The LS1012A Development System (QDS) is a high-performance 838 development platform that supports the QorIQ LS1012A 839 Layerscape Architecture processor. 840 841config TARGET_LS1012ARDB 842 bool "Support ls1012ardb" 843 select ARCH_LS1012A 844 select ARM64 845 select BOARD_LATE_INIT 846 help 847 Support for Freescale LS1012ARDB platform. 848 The LS1012A Reference design board (RDB) is a high-performance 849 development platform that supports the QorIQ LS1012A 850 Layerscape Architecture processor. 851 852config TARGET_LS1012AFRDM 853 bool "Support ls1012afrdm" 854 select ARCH_LS1012A 855 select ARM64 856 help 857 Support for Freescale LS1012AFRDM platform. 858 The LS1012A Freedom board (FRDM) is a high-performance 859 development platform that supports the QorIQ LS1012A 860 Layerscape Architecture processor. 861 862config TARGET_LS1021AQDS 863 bool "Support ls1021aqds" 864 select BOARD_LATE_INIT 865 select CPU_V7 866 select CPU_V7_HAS_NONSEC 867 select CPU_V7_HAS_VIRT 868 select SUPPORT_SPL 869 select ARCH_LS1021A 870 select ARCH_SUPPORT_PSCI 871 select LS1_DEEP_SLEEP 872 select SYS_FSL_DDR 873 select BOARD_EARLY_INIT_F 874 875config TARGET_LS1021ATWR 876 bool "Support ls1021atwr" 877 select BOARD_LATE_INIT 878 select CPU_V7 879 select CPU_V7_HAS_NONSEC 880 select CPU_V7_HAS_VIRT 881 select SUPPORT_SPL 882 select ARCH_LS1021A 883 select ARCH_SUPPORT_PSCI 884 select LS1_DEEP_SLEEP 885 select BOARD_EARLY_INIT_F 886 887config TARGET_LS1021AIOT 888 bool "Support ls1021aiot" 889 select BOARD_LATE_INIT 890 select CPU_V7 891 select CPU_V7_HAS_NONSEC 892 select CPU_V7_HAS_VIRT 893 select SUPPORT_SPL 894 select ARCH_LS1021A 895 select ARCH_SUPPORT_PSCI 896 help 897 Support for Freescale LS1021AIOT platform. 898 The LS1021A Freescale board (IOT) is a high-performance 899 development platform that supports the QorIQ LS1021A 900 Layerscape Architecture processor. 901 902config TARGET_LS1043AQDS 903 bool "Support ls1043aqds" 904 select ARCH_LS1043A 905 select ARM64 906 select ARMV8_MULTIENTRY 907 select BOARD_LATE_INIT 908 select SUPPORT_SPL 909 select BOARD_EARLY_INIT_F 910 help 911 Support for Freescale LS1043AQDS platform. 912 913config TARGET_LS1043ARDB 914 bool "Support ls1043ardb" 915 select ARCH_LS1043A 916 select ARM64 917 select ARMV8_MULTIENTRY 918 select BOARD_LATE_INIT 919 select SUPPORT_SPL 920 select BOARD_EARLY_INIT_F 921 help 922 Support for Freescale LS1043ARDB platform. 923 924config TARGET_LS1046AQDS 925 bool "Support ls1046aqds" 926 select ARCH_LS1046A 927 select ARM64 928 select ARMV8_MULTIENTRY 929 select BOARD_LATE_INIT 930 select SUPPORT_SPL 931 select DM_SPI_FLASH if DM_SPI 932 select BOARD_EARLY_INIT_F 933 help 934 Support for Freescale LS1046AQDS platform. 935 The LS1046A Development System (QDS) is a high-performance 936 development platform that supports the QorIQ LS1046A 937 Layerscape Architecture processor. 938 939config TARGET_LS1046ARDB 940 bool "Support ls1046ardb" 941 select ARCH_LS1046A 942 select ARM64 943 select ARMV8_MULTIENTRY 944 select BOARD_LATE_INIT 945 select SUPPORT_SPL 946 select DM_SPI_FLASH if DM_SPI 947 select POWER_MC34VR500 948 select BOARD_EARLY_INIT_F 949 help 950 Support for Freescale LS1046ARDB platform. 951 The LS1046A Reference Design Board (RDB) is a high-performance 952 development platform that supports the QorIQ LS1046A 953 Layerscape Architecture processor. 954 955config TARGET_H2200 956 bool "Support h2200" 957 select CPU_PXA 958 959config TARGET_ZIPITZ2 960 bool "Support zipitz2" 961 select CPU_PXA 962 963config TARGET_COLIBRI_PXA270 964 bool "Support colibri_pxa270" 965 select CPU_PXA 966 967config ARCH_UNIPHIER 968 bool "Socionext UniPhier SoCs" 969 select BOARD_LATE_INIT 970 select CLK_UNIPHIER 971 select DM 972 select DM_GPIO 973 select DM_I2C 974 select DM_MMC 975 select DM_RESET 976 select DM_SERIAL 977 select DM_USB 978 select OF_CONTROL 979 select OF_LIBFDT 980 select PINCTRL 981 select SPL_BOARD_INIT if SPL 982 select SPL_DM if SPL 983 select SPL_LIBCOMMON_SUPPORT if SPL 984 select SPL_LIBGENERIC_SUPPORT if SPL 985 select SPL_OF_CONTROL if SPL 986 select SPL_PINCTRL if SPL 987 select SUPPORT_SPL 988 imply FAT_WRITE 989 help 990 Support for UniPhier SoC family developed by Socionext Inc. 991 (formerly, System LSI Business Division of Panasonic Corporation) 992 993config STM32 994 bool "Support STM32" 995 select CPU_V7M 996 select DM 997 select DM_SERIAL 998 select SYS_THUMB_BUILD 999 1000config ARCH_STI 1001 bool "Support STMicrolectronics SoCs" 1002 select CPU_V7 1003 select DM 1004 select DM_SERIAL 1005 select BLK 1006 select DM_MMC 1007 select DM_RESET 1008 help 1009 Support for STMicroelectronics STiH407/10 SoC family. 1010 This SoC is used on Linaro 96Board STiH410-B2260 1011 1012config ARCH_ROCKCHIP 1013 bool "Support Rockchip SoCs" 1014 select OF_CONTROL 1015 select BLK 1016 select DM 1017 select SPL_DM if SPL 1018 select SYS_MALLOC_F 1019 select SYS_THUMB_BUILD if !ARM64 1020 select SPL_SYS_MALLOC_SIMPLE if SPL 1021 select DM_GPIO 1022 select DM_I2C 1023 select DM_MMC 1024 select DM_MMC_OPS 1025 select DM_SERIAL 1026 select DM_SPI 1027 select DM_SPI_FLASH 1028 select DM_USB if USB 1029 select DM_PWM 1030 select DM_REGULATOR 1031 imply FAT_WRITE 1032 1033config TARGET_THUNDERX_88XX 1034 bool "Support ThunderX 88xx" 1035 select ARM64 1036 select OF_CONTROL 1037 select SYS_CACHE_SHIFT_7 1038 1039config ARCH_ASPEED 1040 bool "Support Aspeed SoCs" 1041 select OF_CONTROL 1042 select DM 1043 1044endchoice 1045 1046source "arch/arm/mach-aspeed/Kconfig" 1047 1048source "arch/arm/mach-at91/Kconfig" 1049 1050source "arch/arm/mach-bcm283x/Kconfig" 1051 1052source "arch/arm/mach-davinci/Kconfig" 1053 1054source "arch/arm/mach-exynos/Kconfig" 1055 1056source "arch/arm/mach-highbank/Kconfig" 1057 1058source "arch/arm/mach-integrator/Kconfig" 1059 1060source "arch/arm/mach-keystone/Kconfig" 1061 1062source "arch/arm/mach-kirkwood/Kconfig" 1063 1064source "arch/arm/mach-mvebu/Kconfig" 1065 1066source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1067 1068source "arch/arm/cpu/armv7/mx7ulp/Kconfig" 1069 1070source "arch/arm/cpu/armv7/mx7/Kconfig" 1071 1072source "arch/arm/cpu/armv7/mx6/Kconfig" 1073 1074source "arch/arm/cpu/armv7/mx5/Kconfig" 1075 1076source "arch/arm/mach-omap2/Kconfig" 1077 1078source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1079 1080source "arch/arm/mach-orion5x/Kconfig" 1081 1082source "arch/arm/mach-rmobile/Kconfig" 1083 1084source "arch/arm/mach-meson/Kconfig" 1085 1086source "arch/arm/mach-rockchip/Kconfig" 1087 1088source "arch/arm/mach-s5pc1xx/Kconfig" 1089 1090source "arch/arm/mach-snapdragon/Kconfig" 1091 1092source "arch/arm/mach-socfpga/Kconfig" 1093 1094source "arch/arm/mach-sti/Kconfig" 1095 1096source "arch/arm/mach-stm32/Kconfig" 1097 1098source "arch/arm/mach-sunxi/Kconfig" 1099 1100source "arch/arm/mach-tegra/Kconfig" 1101 1102source "arch/arm/mach-uniphier/Kconfig" 1103 1104source "arch/arm/cpu/armv7/vf610/Kconfig" 1105 1106source "arch/arm/mach-zynq/Kconfig" 1107 1108source "arch/arm/cpu/armv7/Kconfig" 1109 1110source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1111 1112source "arch/arm/cpu/armv8/Kconfig" 1113 1114source "arch/arm/imx-common/Kconfig" 1115 1116source "board/aries/m28evk/Kconfig" 1117source "board/bosch/shc/Kconfig" 1118source "board/CarMediaLab/flea3/Kconfig" 1119source "board/Marvell/aspenite/Kconfig" 1120source "board/Marvell/gplugd/Kconfig" 1121source "board/armadeus/apf27/Kconfig" 1122source "board/armltd/vexpress/Kconfig" 1123source "board/armltd/vexpress64/Kconfig" 1124source "board/bluegiga/apx4devkit/Kconfig" 1125source "board/broadcom/bcm23550_w1d/Kconfig" 1126source "board/broadcom/bcm28155_ap/Kconfig" 1127source "board/broadcom/bcmcygnus/Kconfig" 1128source "board/broadcom/bcmnsp/Kconfig" 1129source "board/broadcom/bcmns2/Kconfig" 1130source "board/cavium/thunderx/Kconfig" 1131source "board/cirrus/edb93xx/Kconfig" 1132source "board/creative/xfi3/Kconfig" 1133source "board/freescale/ls2080a/Kconfig" 1134source "board/freescale/ls2080aqds/Kconfig" 1135source "board/freescale/ls2080ardb/Kconfig" 1136source "board/freescale/ls1021aqds/Kconfig" 1137source "board/freescale/ls1043aqds/Kconfig" 1138source "board/freescale/ls1021atwr/Kconfig" 1139source "board/freescale/ls1021aiot/Kconfig" 1140source "board/freescale/ls1046aqds/Kconfig" 1141source "board/freescale/ls1043ardb/Kconfig" 1142source "board/freescale/ls1046ardb/Kconfig" 1143source "board/freescale/ls1012aqds/Kconfig" 1144source "board/freescale/ls1012ardb/Kconfig" 1145source "board/freescale/ls1012afrdm/Kconfig" 1146source "board/freescale/mx23evk/Kconfig" 1147source "board/freescale/mx25pdk/Kconfig" 1148source "board/freescale/mx28evk/Kconfig" 1149source "board/freescale/mx31ads/Kconfig" 1150source "board/freescale/mx31pdk/Kconfig" 1151source "board/freescale/mx35pdk/Kconfig" 1152source "board/freescale/s32v234evb/Kconfig" 1153source "board/gdsys/a38x/Kconfig" 1154source "board/grinn/chiliboard/Kconfig" 1155source "board/gumstix/pepper/Kconfig" 1156source "board/h2200/Kconfig" 1157source "board/hisilicon/hikey/Kconfig" 1158source "board/imx31_phycore/Kconfig" 1159source "board/isee/igep003x/Kconfig" 1160source "board/olimex/mx23_olinuxino/Kconfig" 1161source "board/phytec/pcm051/Kconfig" 1162source "board/ppcag/bg0900/Kconfig" 1163source "board/sandisk/sansa_fuze_plus/Kconfig" 1164source "board/schulercontrol/sc_sps_1/Kconfig" 1165source "board/silica/pengwyn/Kconfig" 1166source "board/spear/spear300/Kconfig" 1167source "board/spear/spear310/Kconfig" 1168source "board/spear/spear320/Kconfig" 1169source "board/spear/spear600/Kconfig" 1170source "board/spear/x600/Kconfig" 1171source "board/st/stv0991/Kconfig" 1172source "board/syteco/zmx25/Kconfig" 1173source "board/tcl/sl50/Kconfig" 1174source "board/birdland/bav335x/Kconfig" 1175source "board/timll/devkit3250/Kconfig" 1176source "board/toradex/colibri_pxa270/Kconfig" 1177source "board/technologic/ts4600/Kconfig" 1178source "board/vscom/baltos/Kconfig" 1179source "board/woodburn/Kconfig" 1180source "board/work-microwave/work_92105/Kconfig" 1181source "board/zipitz2/Kconfig" 1182 1183source "arch/arm/Kconfig.debug" 1184 1185endmenu 1186