1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# If set, the workarounds for these ARM errata are applied early during U-Boot 23# startup. Note that in general these options force the workarounds to be 24# applied; no CPU-type/version detection exists, unlike the similar options in 25# the Linux kernel. Do not set these options unless they apply! Also note that 26# the following can be machine specific errata. These do have ability to 27# provide rudimentary version and machine specific checks, but expect no 28# product checks: 29# CONFIG_ARM_ERRATA_430973 30# CONFIG_ARM_ERRATA_454179 31# CONFIG_ARM_ERRATA_621766 32# CONFIG_ARM_ERRATA_798870 33# CONFIG_ARM_ERRATA_801819 34config ARM_ERRATA_430973 35 bool 36 37config ARM_ERRATA_454179 38 bool 39 40config ARM_ERRATA_621766 41 bool 42 43config ARM_ERRATA_716044 44 bool 45 46config ARM_ERRATA_725233 47 bool 48 49config ARM_ERRATA_742230 50 bool 51 52config ARM_ERRATA_743622 53 bool 54 55config ARM_ERRATA_751472 56 bool 57 58config ARM_ERRATA_761320 59 bool 60 61config ARM_ERRATA_773022 62 bool 63 64config ARM_ERRATA_774769 65 bool 66 67config ARM_ERRATA_794072 68 bool 69 70config ARM_ERRATA_798870 71 bool 72 73config ARM_ERRATA_801819 74 bool 75 76config ARM_ERRATA_826974 77 bool 78 79config ARM_ERRATA_828024 80 bool 81 82config ARM_ERRATA_829520 83 bool 84 85config ARM_ERRATA_833069 86 bool 87 88config ARM_ERRATA_833471 89 bool 90 91config CPU_ARM720T 92 bool 93 select SYS_CACHE_SHIFT_5 94 95config CPU_ARM920T 96 bool 97 select SYS_CACHE_SHIFT_5 98 99config CPU_ARM926EJS 100 bool 101 select SYS_CACHE_SHIFT_5 102 103config CPU_ARM946ES 104 bool 105 select SYS_CACHE_SHIFT_5 106 107config CPU_ARM1136 108 bool 109 select SYS_CACHE_SHIFT_5 110 111config CPU_ARM1176 112 bool 113 select HAS_VBAR 114 select SYS_CACHE_SHIFT_5 115 116config CPU_V7 117 bool 118 select HAS_VBAR 119 select HAS_THUMB2 120 select SYS_CACHE_SHIFT_6 121 122config CPU_V7M 123 bool 124 select HAS_THUMB2 125 select SYS_CACHE_SHIFT_5 126 127config CPU_PXA 128 bool 129 select SYS_CACHE_SHIFT_5 130 131config CPU_SA1100 132 bool 133 select SYS_CACHE_SHIFT_5 134 135config SYS_CPU 136 default "arm720t" if CPU_ARM720T 137 default "arm920t" if CPU_ARM920T 138 default "arm926ejs" if CPU_ARM926EJS 139 default "arm946es" if CPU_ARM946ES 140 default "arm1136" if CPU_ARM1136 141 default "arm1176" if CPU_ARM1176 142 default "armv7" if CPU_V7 143 default "armv7m" if CPU_V7M 144 default "pxa" if CPU_PXA 145 default "sa1100" if CPU_SA1100 146 default "armv8" if ARM64 147 148config SYS_ARM_ARCH 149 int 150 default 4 if CPU_ARM720T 151 default 4 if CPU_ARM920T 152 default 5 if CPU_ARM926EJS 153 default 5 if CPU_ARM946ES 154 default 6 if CPU_ARM1136 155 default 6 if CPU_ARM1176 156 default 7 if CPU_V7 157 default 7 if CPU_V7M 158 default 5 if CPU_PXA 159 default 4 if CPU_SA1100 160 default 8 if ARM64 161 162config SYS_CACHE_SHIFT_5 163 bool 164 165config SYS_CACHE_SHIFT_6 166 bool 167 168config SYS_CACHE_SHIFT_7 169 bool 170 171config SYS_CACHELINE_SIZE 172 int 173 default 128 if SYS_CACHE_SHIFT_7 174 default 64 if SYS_CACHE_SHIFT_6 175 default 32 if SYS_CACHE_SHIFT_5 176 177config ARM_SMCCC 178 bool "Support for ARM SMC Calling Convention (SMCCC)" 179 depends on CPU_V7 || ARM64 180 select ARM_PSCI_FW 181 help 182 Say Y here if you want to enable ARM SMC Calling Convention. 183 This should be enabled if U-Boot needs to communicate with system 184 firmware (for example, PSCI) according to SMCCC. 185 186config SEMIHOSTING 187 bool "support boot from semihosting" 188 help 189 In emulated environments, semihosting is a way for 190 the hosted environment to call out to the emulator to 191 retrieve files from the host machine. 192 193config SYS_THUMB_BUILD 194 bool "Build U-Boot using the Thumb instruction set" 195 depends on !ARM64 196 help 197 Use this flag to build U-Boot using the Thumb instruction set for 198 ARM architectures. Thumb instruction set provides better code 199 density. For ARM architectures that support Thumb2 this flag will 200 result in Thumb2 code generated by GCC. 201 202config SPL_SYS_THUMB_BUILD 203 bool "Build SPL using the Thumb instruction set" 204 default y if SYS_THUMB_BUILD 205 depends on !ARM64 206 help 207 Use this flag to build SPL using the Thumb instruction set for 208 ARM architectures. Thumb instruction set provides better code 209 density. For ARM architectures that support Thumb2 this flag will 210 result in Thumb2 code generated by GCC. 211 212config SYS_L2CACHE_OFF 213 bool "L2cache off" 214 help 215 If SoC does not support L2CACHE or one do not want to enable 216 L2CACHE, choose this option. 217 218config ENABLE_ARM_SOC_BOOT0_HOOK 219 bool "prepare BOOT0 header" 220 help 221 If the SoC's BOOT0 requires a header area filled with (magic) 222 values, then choose this option, and create a define called 223 ARM_SOC_BOOT0_HOOK which contains the required assembler 224 preprocessor code. 225 226config ARM_CORTEX_CPU_IS_UP 227 bool 228 default n 229 230config USE_ARCH_MEMCPY 231 bool "Use an assembly optimized implementation of memcpy" 232 default y 233 depends on !ARM64 234 help 235 Enable the generation of an optimized version of memcpy. 236 Such implementation may be faster under some conditions 237 but may increase the binary size. 238 239config SPL_USE_ARCH_MEMCPY 240 bool "Use an assembly optimized implementation of memcpy" 241 default y if USE_ARCH_MEMCPY 242 depends on !ARM64 243 help 244 Enable the generation of an optimized version of memcpy. 245 Such implementation may be faster under some conditions 246 but may increase the binary size. 247 248config USE_ARCH_MEMSET 249 bool "Use an assembly optimized implementation of memset" 250 default y 251 depends on !ARM64 252 help 253 Enable the generation of an optimized version of memset. 254 Such implementation may be faster under some conditions 255 but may increase the binary size. 256 257config SPL_USE_ARCH_MEMSET 258 bool "Use an assembly optimized implementation of memset" 259 default y if USE_ARCH_MEMSET 260 depends on !ARM64 261 help 262 Enable the generation of an optimized version of memset. 263 Such implementation may be faster under some conditions 264 but may increase the binary size. 265 266config ARM64_SUPPORT_AARCH32 267 bool "ARM64 system support AArch32 execution state" 268 default y if ARM64 && !TARGET_THUNDERX_88XX 269 help 270 This ARM64 system supports AArch32 execution state. 271 272choice 273 prompt "Target select" 274 default TARGET_HIKEY 275 276config ARCH_AT91 277 bool "Atmel AT91" 278 279config TARGET_EDB93XX 280 bool "Support edb93xx" 281 select CPU_ARM920T 282 283config TARGET_ASPENITE 284 bool "Support aspenite" 285 select CPU_ARM926EJS 286 287config TARGET_GPLUGD 288 bool "Support gplugd" 289 select CPU_ARM926EJS 290 291config ARCH_DAVINCI 292 bool "TI DaVinci" 293 select CPU_ARM926EJS 294 help 295 Support for TI's DaVinci platform. 296 297config KIRKWOOD 298 bool "Marvell Kirkwood" 299 select CPU_ARM926EJS 300 select BOARD_EARLY_INIT_F 301 select ARCH_MISC_INIT 302 303config ARCH_MVEBU 304 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 305 select OF_CONTROL 306 select OF_SEPARATE 307 select DM 308 select DM_ETH 309 select DM_SERIAL 310 select DM_SPI 311 select DM_SPI_FLASH 312 313config TARGET_DEVKIT3250 314 bool "Support devkit3250" 315 select CPU_ARM926EJS 316 select SUPPORT_SPL 317 318config TARGET_WORK_92105 319 bool "Support work_92105" 320 select CPU_ARM926EJS 321 select SUPPORT_SPL 322 323config TARGET_MX25PDK 324 bool "Support mx25pdk" 325 select BOARD_LATE_INIT 326 select CPU_ARM926EJS 327 select BOARD_EARLY_INIT_F 328 329config TARGET_ZMX25 330 bool "Support zmx25" 331 select BOARD_LATE_INIT 332 select CPU_ARM926EJS 333 334config TARGET_APF27 335 bool "Support apf27" 336 select CPU_ARM926EJS 337 select SUPPORT_SPL 338 339config TARGET_APX4DEVKIT 340 bool "Support apx4devkit" 341 select CPU_ARM926EJS 342 select SUPPORT_SPL 343 344config TARGET_XFI3 345 bool "Support xfi3" 346 select CPU_ARM926EJS 347 select SUPPORT_SPL 348 349config TARGET_M28EVK 350 bool "Support m28evk" 351 select CPU_ARM926EJS 352 select SUPPORT_SPL 353 354config TARGET_MX23EVK 355 bool "Support mx23evk" 356 select CPU_ARM926EJS 357 select SUPPORT_SPL 358 select BOARD_EARLY_INIT_F 359 360config TARGET_MX28EVK 361 bool "Support mx28evk" 362 select CPU_ARM926EJS 363 select SUPPORT_SPL 364 select BOARD_EARLY_INIT_F 365 366config TARGET_MX23_OLINUXINO 367 bool "Support mx23_olinuxino" 368 select CPU_ARM926EJS 369 select SUPPORT_SPL 370 select BOARD_EARLY_INIT_F 371 372config TARGET_BG0900 373 bool "Support bg0900" 374 select CPU_ARM926EJS 375 select SUPPORT_SPL 376 377config TARGET_SANSA_FUZE_PLUS 378 bool "Support sansa_fuze_plus" 379 select CPU_ARM926EJS 380 select SUPPORT_SPL 381 382config TARGET_SC_SPS_1 383 bool "Support sc_sps_1" 384 select CPU_ARM926EJS 385 select SUPPORT_SPL 386 387config ORION5X 388 bool "Marvell Orion" 389 select CPU_ARM926EJS 390 391config TARGET_SPEAR300 392 bool "Support spear300" 393 select CPU_ARM926EJS 394 select BOARD_EARLY_INIT_F 395 396config TARGET_SPEAR310 397 bool "Support spear310" 398 select CPU_ARM926EJS 399 select BOARD_EARLY_INIT_F 400 401config TARGET_SPEAR320 402 bool "Support spear320" 403 select CPU_ARM926EJS 404 select BOARD_EARLY_INIT_F 405 406config TARGET_SPEAR600 407 bool "Support spear600" 408 select CPU_ARM926EJS 409 select BOARD_EARLY_INIT_F 410 411config TARGET_STV0991 412 bool "Support stv0991" 413 select CPU_V7 414 select DM 415 select DM_SERIAL 416 select DM_SPI 417 select DM_SPI_FLASH 418 select SPI_FLASH 419 420config TARGET_X600 421 bool "Support x600" 422 select BOARD_LATE_INIT 423 select CPU_ARM926EJS 424 select SUPPORT_SPL 425 426config TARGET_IMX31_PHYCORE 427 bool "Support imx31_phycore_eet" 428 select CPU_ARM1136 429 select BOARD_EARLY_INIT_F 430 431config TARGET_IMX31_PHYCORE_EET 432 bool "Support imx31_phycore_eet" 433 select BOARD_LATE_INIT 434 select CPU_ARM1136 435 select BOARD_EARLY_INIT_F 436 437config TARGET_MX31ADS 438 bool "Support mx31ads" 439 select CPU_ARM1136 440 select BOARD_EARLY_INIT_F 441 442config TARGET_MX31PDK 443 bool "Support mx31pdk" 444 select BOARD_LATE_INIT 445 select CPU_ARM1136 446 select SUPPORT_SPL 447 select BOARD_EARLY_INIT_F 448 449config TARGET_WOODBURN 450 bool "Support woodburn" 451 select CPU_ARM1136 452 453config TARGET_WOODBURN_SD 454 bool "Support woodburn_sd" 455 select CPU_ARM1136 456 select SUPPORT_SPL 457 458config TARGET_FLEA3 459 bool "Support flea3" 460 select CPU_ARM1136 461 462config TARGET_MX35PDK 463 bool "Support mx35pdk" 464 select BOARD_LATE_INIT 465 select CPU_ARM1136 466 467config ARCH_BCM283X 468 bool "Broadcom BCM283X family" 469 select DM 470 select DM_SERIAL 471 select DM_GPIO 472 select OF_CONTROL 473 474config TARGET_VEXPRESS_CA15_TC2 475 bool "Support vexpress_ca15_tc2" 476 select CPU_V7 477 select CPU_V7_HAS_NONSEC 478 select CPU_V7_HAS_VIRT 479 480config TARGET_VEXPRESS_CA5X2 481 bool "Support vexpress_ca5x2" 482 select CPU_V7 483 484config TARGET_VEXPRESS_CA9X4 485 bool "Support vexpress_ca9x4" 486 select CPU_V7 487 488config TARGET_BCM23550_W1D 489 bool "Support bcm23550_w1d" 490 select CPU_V7 491 492config TARGET_BCM28155_AP 493 bool "Support bcm28155_ap" 494 select CPU_V7 495 496config TARGET_BCMCYGNUS 497 bool "Support bcmcygnus" 498 select CPU_V7 499 500config TARGET_BCMNSP 501 bool "Support bcmnsp" 502 select CPU_V7 503 504config TARGET_BCMNS2 505 bool "Support Broadcom Northstar2" 506 select ARM64 507 help 508 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 509 ARMv8 Cortex-A57 processors targeting a broad range of networking 510 applications 511 512config ARCH_EXYNOS 513 bool "Samsung EXYNOS" 514 select DM 515 select DM_I2C 516 select DM_SPI_FLASH 517 select DM_SERIAL 518 select DM_SPI 519 select DM_GPIO 520 select DM_KEYBOARD 521 522config ARCH_S5PC1XX 523 bool "Samsung S5PC1XX" 524 select CPU_V7 525 select DM 526 select DM_SERIAL 527 select DM_GPIO 528 select DM_I2C 529 530config ARCH_HIGHBANK 531 bool "Calxeda Highbank" 532 select CPU_V7 533 534config ARCH_INTEGRATOR 535 bool "ARM Ltd. Integrator family" 536 select DM 537 select DM_SERIAL 538 539config ARCH_KEYSTONE 540 bool "TI Keystone" 541 select CPU_V7 542 select SUPPORT_SPL 543 select SYS_THUMB_BUILD 544 select CMD_POWEROFF 545 imply FIT 546 547config ARCH_OMAP2PLUS 548 bool "TI OMAP2+" 549 select CPU_V7 550 select SUPPORT_SPL 551 imply FIT 552 553config ARCH_MESON 554 bool "Amlogic Meson" 555 help 556 Support for the Meson SoC family developed by Amlogic Inc., 557 targeted at media players and tablet computers. We currently 558 support the S905 (GXBaby) 64-bit SoC. 559 560config ARCH_MX7ULP 561 bool "NXP MX7ULP" 562 select CPU_V7 563 select ROM_UNIFIED_SECTIONS 564 565config ARCH_MX7 566 bool "Freescale MX7" 567 select CPU_V7 568 select SYS_FSL_HAS_SEC if SECURE_BOOT 569 select SYS_FSL_SEC_COMPAT_4 570 select SYS_FSL_SEC_LE 571 select BOARD_EARLY_INIT_F 572 select ARCH_MISC_INIT 573 574config ARCH_MX6 575 bool "Freescale MX6" 576 select CPU_V7 577 select SYS_FSL_HAS_SEC if SECURE_BOOT 578 select SYS_FSL_SEC_COMPAT_4 579 select SYS_FSL_SEC_LE 580 select SYS_THUMB_BUILD if SPL 581 582config ARCH_MX5 583 bool "Freescale MX5" 584 select CPU_V7 585 select BOARD_EARLY_INIT_F 586 587config ARCH_RMOBILE 588 bool "Renesas ARM SoCs" 589 select DM 590 select DM_SERIAL 591 select BOARD_EARLY_INIT_F 592 imply SYS_THUMB_BUILD 593 594config TARGET_S32V234EVB 595 bool "Support s32v234evb" 596 select ARM64 597 select SYS_FSL_ERRATUM_ESDHC111 598 599config ARCH_SNAPDRAGON 600 bool "Qualcomm Snapdragon SoCs" 601 select ARM64 602 select DM 603 select DM_GPIO 604 select DM_SERIAL 605 select SPMI 606 select OF_CONTROL 607 select OF_SEPARATE 608 609config ARCH_SOCFPGA 610 bool "Altera SOCFPGA family" 611 select CPU_V7 612 select SUPPORT_SPL 613 select OF_CONTROL 614 select SPL_OF_CONTROL 615 select DM 616 select DM_SPI_FLASH 617 select DM_SPI 618 select ENABLE_ARM_SOC_BOOT0_HOOK 619 select ARCH_EARLY_INIT_R 620 select ARCH_MISC_INIT 621 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 622 select SYS_THUMB_BUILD 623 624config ARCH_SUNXI 625 bool "Support sunxi (Allwinner) SoCs" 626 select CMD_GPIO 627 select CMD_MMC if MMC 628 select CMD_USB if DISTRO_DEFAULTS 629 select DM 630 select DM_ETH 631 select DM_GPIO 632 select DM_KEYBOARD 633 select DM_SERIAL 634 select DM_USB if DISTRO_DEFAULTS 635 select OF_BOARD_SETUP 636 select OF_CONTROL 637 select OF_SEPARATE 638 select SPL_STACK_R if SUPPORT_SPL 639 select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL 640 select SYS_NS16550 641 select SPL_SYS_THUMB_BUILD if !ARM64 642 select USB if DISTRO_DEFAULTS 643 select USB_STORAGE if DISTRO_DEFAULTS 644 select USB_KEYBOARD if DISTRO_DEFAULTS 645 select USE_TINY_PRINTF 646 647config TARGET_TS4600 648 bool "Support TS4600" 649 select CPU_ARM926EJS 650 select SUPPORT_SPL 651 652config ARCH_VF610 653 bool "Freescale Vybrid" 654 select CPU_V7 655 select SYS_FSL_ERRATUM_ESDHC111 656 657config ARCH_ZYNQ 658 bool "Xilinx Zynq Platform" 659 select BOARD_LATE_INIT 660 select CPU_V7 661 select SUPPORT_SPL 662 select OF_CONTROL 663 select SPL_OF_CONTROL if SPL 664 select DM 665 select DM_ETH 666 select DM_GPIO 667 select SPL_DM if SPL 668 select DM_MMC 669 select DM_MMC_OPS 670 select DM_SPI 671 select DM_SERIAL 672 select DM_SPI_FLASH 673 select SPL_SEPARATE_BSS if SPL 674 select DM_USB if USB 675 select BLK 676 select CLK 677 select SPL_CLK 678 select CLK_ZYNQ 679 680config ARCH_ZYNQMP 681 bool "Support Xilinx ZynqMP Platform" 682 select ARM64 683 select BOARD_LATE_INIT 684 select DM 685 select OF_CONTROL 686 select DM_SERIAL 687 select SUPPORT_SPL 688 select CLK 689 select SPL_CLK 690 select DM_USB if USB 691 692config TEGRA 693 bool "NVIDIA Tegra" 694 695config TARGET_VEXPRESS64_AEMV8A 696 bool "Support vexpress_aemv8a" 697 select ARM64 698 699config TARGET_VEXPRESS64_BASE_FVP 700 bool "Support Versatile Express ARMv8a FVP BASE model" 701 select ARM64 702 select SEMIHOSTING 703 704config TARGET_VEXPRESS64_BASE_FVP_DRAM 705 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 706 select ARM64 707 help 708 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 709 the default config to allow the user to load the images directly into 710 DRAM using model parameters rather than by using semi-hosting to load 711 the files from the host filesystem. 712 713config TARGET_VEXPRESS64_JUNO 714 bool "Support Versatile Express Juno Development Platform" 715 select ARM64 716 717config TARGET_LS2080A_EMU 718 bool "Support ls2080a_emu" 719 select ARCH_LS2080A 720 select ARM64 721 select ARMV8_MULTIENTRY 722 select ARCH_MISC_INIT 723 help 724 Support for Freescale LS2080A_EMU platform 725 The LS2080A Development System (EMULATOR) is a pre silicon 726 development platform that supports the QorIQ LS2080A 727 Layerscape Architecture processor. 728 729config TARGET_LS2080A_SIMU 730 bool "Support ls2080a_simu" 731 select ARCH_LS2080A 732 select ARM64 733 select ARMV8_MULTIENTRY 734 select ARCH_MISC_INIT 735 help 736 Support for Freescale LS2080A_SIMU platform 737 The LS2080A Development System (QDS) is a pre silicon 738 development platform that supports the QorIQ LS2080A 739 Layerscape Architecture processor. 740 741config TARGET_LS2080AQDS 742 bool "Support ls2080aqds" 743 select ARCH_LS2080A 744 select ARM64 745 select ARMV8_MULTIENTRY 746 select BOARD_LATE_INIT 747 select SUPPORT_SPL 748 select ARCH_MISC_INIT 749 help 750 Support for Freescale LS2080AQDS platform 751 The LS2080A Development System (QDS) is a high-performance 752 development platform that supports the QorIQ LS2080A 753 Layerscape Architecture processor. 754 755config TARGET_LS2080ARDB 756 bool "Support ls2080ardb" 757 select ARCH_LS2080A 758 select ARM64 759 select ARMV8_MULTIENTRY 760 select BOARD_LATE_INIT 761 select SUPPORT_SPL 762 select ARCH_MISC_INIT 763 help 764 Support for Freescale LS2080ARDB platform. 765 The LS2080A Reference design board (RDB) is a high-performance 766 development platform that supports the QorIQ LS2080A 767 Layerscape Architecture processor. 768 769config TARGET_HIKEY 770 bool "Support HiKey 96boards Consumer Edition Platform" 771 select ARM64 772 select DM 773 select DM_GPIO 774 select DM_SERIAL 775 select OF_CONTROL 776 help 777 Support for HiKey 96boards platform. It features a HI6220 778 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 779 780config TARGET_LS1012AQDS 781 bool "Support ls1012aqds" 782 select ARCH_LS1012A 783 select ARM64 784 select BOARD_LATE_INIT 785 help 786 Support for Freescale LS1012AQDS platform. 787 The LS1012A Development System (QDS) is a high-performance 788 development platform that supports the QorIQ LS1012A 789 Layerscape Architecture processor. 790 791config TARGET_LS1012ARDB 792 bool "Support ls1012ardb" 793 select ARCH_LS1012A 794 select ARM64 795 select BOARD_LATE_INIT 796 help 797 Support for Freescale LS1012ARDB platform. 798 The LS1012A Reference design board (RDB) is a high-performance 799 development platform that supports the QorIQ LS1012A 800 Layerscape Architecture processor. 801 802config TARGET_LS1012AFRDM 803 bool "Support ls1012afrdm" 804 select ARCH_LS1012A 805 select ARM64 806 help 807 Support for Freescale LS1012AFRDM platform. 808 The LS1012A Freedom board (FRDM) is a high-performance 809 development platform that supports the QorIQ LS1012A 810 Layerscape Architecture processor. 811 812config TARGET_LS1021AQDS 813 bool "Support ls1021aqds" 814 select BOARD_LATE_INIT 815 select CPU_V7 816 select CPU_V7_HAS_NONSEC 817 select CPU_V7_HAS_VIRT 818 select SUPPORT_SPL 819 select ARCH_LS1021A 820 select ARCH_SUPPORT_PSCI 821 select LS1_DEEP_SLEEP 822 select SYS_FSL_DDR 823 select BOARD_EARLY_INIT_F 824 825config TARGET_LS1021ATWR 826 bool "Support ls1021atwr" 827 select BOARD_LATE_INIT 828 select CPU_V7 829 select CPU_V7_HAS_NONSEC 830 select CPU_V7_HAS_VIRT 831 select SUPPORT_SPL 832 select ARCH_LS1021A 833 select ARCH_SUPPORT_PSCI 834 select LS1_DEEP_SLEEP 835 select BOARD_EARLY_INIT_F 836 837config TARGET_LS1021AIOT 838 bool "Support ls1021aiot" 839 select BOARD_LATE_INIT 840 select CPU_V7 841 select CPU_V7_HAS_NONSEC 842 select CPU_V7_HAS_VIRT 843 select SUPPORT_SPL 844 select ARCH_LS1021A 845 select ARCH_SUPPORT_PSCI 846 help 847 Support for Freescale LS1021AIOT platform. 848 The LS1021A Freescale board (IOT) is a high-performance 849 development platform that supports the QorIQ LS1021A 850 Layerscape Architecture processor. 851 852config TARGET_LS1043AQDS 853 bool "Support ls1043aqds" 854 select ARCH_LS1043A 855 select ARM64 856 select ARMV8_MULTIENTRY 857 select BOARD_LATE_INIT 858 select SUPPORT_SPL 859 select BOARD_EARLY_INIT_F 860 help 861 Support for Freescale LS1043AQDS platform. 862 863config TARGET_LS1043ARDB 864 bool "Support ls1043ardb" 865 select ARCH_LS1043A 866 select ARM64 867 select ARMV8_MULTIENTRY 868 select BOARD_LATE_INIT 869 select SUPPORT_SPL 870 select BOARD_EARLY_INIT_F 871 help 872 Support for Freescale LS1043ARDB platform. 873 874config TARGET_LS1046AQDS 875 bool "Support ls1046aqds" 876 select ARCH_LS1046A 877 select ARM64 878 select ARMV8_MULTIENTRY 879 select BOARD_LATE_INIT 880 select SUPPORT_SPL 881 select DM_SPI_FLASH if DM_SPI 882 select BOARD_EARLY_INIT_F 883 help 884 Support for Freescale LS1046AQDS platform. 885 The LS1046A Development System (QDS) is a high-performance 886 development platform that supports the QorIQ LS1046A 887 Layerscape Architecture processor. 888 889config TARGET_LS1046ARDB 890 bool "Support ls1046ardb" 891 select ARCH_LS1046A 892 select ARM64 893 select ARMV8_MULTIENTRY 894 select BOARD_LATE_INIT 895 select SUPPORT_SPL 896 select DM_SPI_FLASH if DM_SPI 897 select POWER_MC34VR500 898 select BOARD_EARLY_INIT_F 899 help 900 Support for Freescale LS1046ARDB platform. 901 The LS1046A Reference Design Board (RDB) is a high-performance 902 development platform that supports the QorIQ LS1046A 903 Layerscape Architecture processor. 904 905config TARGET_H2200 906 bool "Support h2200" 907 select CPU_PXA 908 909config TARGET_ZIPITZ2 910 bool "Support zipitz2" 911 select CPU_PXA 912 913config TARGET_COLIBRI_PXA270 914 bool "Support colibri_pxa270" 915 select CPU_PXA 916 917config ARCH_UNIPHIER 918 bool "Socionext UniPhier SoCs" 919 select BOARD_LATE_INIT 920 select CLK_UNIPHIER 921 select DM 922 select DM_GPIO 923 select DM_I2C 924 select DM_MMC 925 select DM_RESET 926 select DM_SERIAL 927 select DM_USB 928 select OF_CONTROL 929 select OF_LIBFDT 930 select PINCTRL 931 select SPL_DM if SPL 932 select SPL_LIBCOMMON_SUPPORT if SPL 933 select SPL_LIBGENERIC_SUPPORT if SPL 934 select SPL_OF_CONTROL if SPL 935 select SPL_PINCTRL if SPL 936 select SUPPORT_SPL 937 help 938 Support for UniPhier SoC family developed by Socionext Inc. 939 (formerly, System LSI Business Division of Panasonic Corporation) 940 941config STM32 942 bool "Support STM32" 943 select CPU_V7M 944 select DM 945 select DM_SERIAL 946 select SYS_THUMB_BUILD 947 948config ARCH_STI 949 bool "Support STMicrolectronics SoCs" 950 select CPU_V7 951 select DM 952 select DM_SERIAL 953 select BLK 954 select DM_MMC 955 select DM_RESET 956 help 957 Support for STMicroelectronics STiH407/10 SoC family. 958 This SoC is used on Linaro 96Board STiH410-B2260 959 960config ARCH_ROCKCHIP 961 bool "Support Rockchip SoCs" 962 select OF_CONTROL 963 select BLK 964 select DM 965 select SPL_DM if SPL 966 select SYS_MALLOC_F 967 select SYS_THUMB_BUILD if !ARM64 968 select SPL_SYS_MALLOC_SIMPLE if SPL 969 select DM_GPIO 970 select DM_I2C 971 select DM_MMC 972 select DM_MMC_OPS 973 select DM_SERIAL 974 select DM_SPI 975 select DM_SPI_FLASH 976 select DM_USB if USB 977 select DM_PWM 978 select DM_REGULATOR 979 980config TARGET_THUNDERX_88XX 981 bool "Support ThunderX 88xx" 982 select ARM64 983 select OF_CONTROL 984 select SYS_CACHE_SHIFT_7 985 986config ARCH_ASPEED 987 bool "Support Aspeed SoCs" 988 select OF_CONTROL 989 select DM 990 991endchoice 992 993source "arch/arm/mach-aspeed/Kconfig" 994 995source "arch/arm/mach-at91/Kconfig" 996 997source "arch/arm/mach-bcm283x/Kconfig" 998 999source "arch/arm/mach-davinci/Kconfig" 1000 1001source "arch/arm/mach-exynos/Kconfig" 1002 1003source "arch/arm/mach-highbank/Kconfig" 1004 1005source "arch/arm/mach-integrator/Kconfig" 1006 1007source "arch/arm/mach-keystone/Kconfig" 1008 1009source "arch/arm/mach-kirkwood/Kconfig" 1010 1011source "arch/arm/mach-mvebu/Kconfig" 1012 1013source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1014 1015source "arch/arm/cpu/armv7/mx7ulp/Kconfig" 1016 1017source "arch/arm/cpu/armv7/mx7/Kconfig" 1018 1019source "arch/arm/cpu/armv7/mx6/Kconfig" 1020 1021source "arch/arm/cpu/armv7/mx5/Kconfig" 1022 1023source "arch/arm/mach-omap2/Kconfig" 1024 1025source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1026 1027source "arch/arm/mach-orion5x/Kconfig" 1028 1029source "arch/arm/mach-rmobile/Kconfig" 1030 1031source "arch/arm/mach-meson/Kconfig" 1032 1033source "arch/arm/mach-rockchip/Kconfig" 1034 1035source "arch/arm/mach-s5pc1xx/Kconfig" 1036 1037source "arch/arm/mach-snapdragon/Kconfig" 1038 1039source "arch/arm/mach-socfpga/Kconfig" 1040 1041source "arch/arm/mach-sti/Kconfig" 1042 1043source "arch/arm/mach-stm32/Kconfig" 1044 1045source "arch/arm/mach-tegra/Kconfig" 1046 1047source "arch/arm/mach-uniphier/Kconfig" 1048 1049source "arch/arm/cpu/armv7/vf610/Kconfig" 1050 1051source "arch/arm/mach-zynq/Kconfig" 1052 1053source "arch/arm/cpu/armv7/Kconfig" 1054 1055source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1056 1057source "arch/arm/cpu/armv8/Kconfig" 1058 1059source "arch/arm/imx-common/Kconfig" 1060 1061source "board/aries/m28evk/Kconfig" 1062source "board/bosch/shc/Kconfig" 1063source "board/CarMediaLab/flea3/Kconfig" 1064source "board/Marvell/aspenite/Kconfig" 1065source "board/Marvell/gplugd/Kconfig" 1066source "board/armadeus/apf27/Kconfig" 1067source "board/armltd/vexpress/Kconfig" 1068source "board/armltd/vexpress64/Kconfig" 1069source "board/bluegiga/apx4devkit/Kconfig" 1070source "board/broadcom/bcm23550_w1d/Kconfig" 1071source "board/broadcom/bcm28155_ap/Kconfig" 1072source "board/broadcom/bcmcygnus/Kconfig" 1073source "board/broadcom/bcmnsp/Kconfig" 1074source "board/broadcom/bcmns2/Kconfig" 1075source "board/cavium/thunderx/Kconfig" 1076source "board/cirrus/edb93xx/Kconfig" 1077source "board/creative/xfi3/Kconfig" 1078source "board/freescale/ls2080a/Kconfig" 1079source "board/freescale/ls2080aqds/Kconfig" 1080source "board/freescale/ls2080ardb/Kconfig" 1081source "board/freescale/ls1021aqds/Kconfig" 1082source "board/freescale/ls1043aqds/Kconfig" 1083source "board/freescale/ls1021atwr/Kconfig" 1084source "board/freescale/ls1021aiot/Kconfig" 1085source "board/freescale/ls1046aqds/Kconfig" 1086source "board/freescale/ls1043ardb/Kconfig" 1087source "board/freescale/ls1046ardb/Kconfig" 1088source "board/freescale/ls1012aqds/Kconfig" 1089source "board/freescale/ls1012ardb/Kconfig" 1090source "board/freescale/ls1012afrdm/Kconfig" 1091source "board/freescale/mx23evk/Kconfig" 1092source "board/freescale/mx25pdk/Kconfig" 1093source "board/freescale/mx28evk/Kconfig" 1094source "board/freescale/mx31ads/Kconfig" 1095source "board/freescale/mx31pdk/Kconfig" 1096source "board/freescale/mx35pdk/Kconfig" 1097source "board/freescale/s32v234evb/Kconfig" 1098source "board/gdsys/a38x/Kconfig" 1099source "board/grinn/chiliboard/Kconfig" 1100source "board/gumstix/pepper/Kconfig" 1101source "board/h2200/Kconfig" 1102source "board/hisilicon/hikey/Kconfig" 1103source "board/imx31_phycore/Kconfig" 1104source "board/isee/igep0033/Kconfig" 1105source "board/olimex/mx23_olinuxino/Kconfig" 1106source "board/phytec/pcm051/Kconfig" 1107source "board/ppcag/bg0900/Kconfig" 1108source "board/sandisk/sansa_fuze_plus/Kconfig" 1109source "board/schulercontrol/sc_sps_1/Kconfig" 1110source "board/silica/pengwyn/Kconfig" 1111source "board/spear/spear300/Kconfig" 1112source "board/spear/spear310/Kconfig" 1113source "board/spear/spear320/Kconfig" 1114source "board/spear/spear600/Kconfig" 1115source "board/spear/x600/Kconfig" 1116source "board/st/stv0991/Kconfig" 1117source "board/sunxi/Kconfig" 1118source "board/syteco/zmx25/Kconfig" 1119source "board/tcl/sl50/Kconfig" 1120source "board/birdland/bav335x/Kconfig" 1121source "board/timll/devkit3250/Kconfig" 1122source "board/toradex/colibri_pxa270/Kconfig" 1123source "board/technologic/ts4600/Kconfig" 1124source "board/vscom/baltos/Kconfig" 1125source "board/woodburn/Kconfig" 1126source "board/work-microwave/work_92105/Kconfig" 1127source "board/zipitz2/Kconfig" 1128 1129source "arch/arm/Kconfig.debug" 1130 1131endmenu 1132