1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config ARCH_BCM63158 532 bool "Broadcom BCM63158 family" 533 select DM 534 select OF_CONTROL 535 imply CMD_DM 536 537config ARCH_BCM6858 538 bool "Broadcom BCM6858 family" 539 select DM 540 select OF_CONTROL 541 imply CMD_DM 542 543config TARGET_VEXPRESS_CA15_TC2 544 bool "Support vexpress_ca15_tc2" 545 select CPU_V7A 546 select CPU_V7_HAS_NONSEC 547 select CPU_V7_HAS_VIRT 548 select PL011_SERIAL 549 550config ARCH_BCMSTB 551 bool "Broadcom BCM7XXX family" 552 select CPU_V7A 553 select DM 554 select OF_CONTROL 555 select OF_PRIOR_STAGE 556 imply CMD_DM 557 help 558 This enables support for Broadcom ARM-based set-top box 559 chipsets, including the 7445 family of chips. 560 561config TARGET_VEXPRESS_CA5X2 562 bool "Support vexpress_ca5x2" 563 select CPU_V7A 564 select PL011_SERIAL 565 566config TARGET_VEXPRESS_CA9X4 567 bool "Support vexpress_ca9x4" 568 select CPU_V7A 569 select PL011_SERIAL 570 571config TARGET_BCM23550_W1D 572 bool "Support bcm23550_w1d" 573 select CPU_V7A 574 imply CRC32_VERIFY 575 imply FAT_WRITE 576 577config TARGET_BCM28155_AP 578 bool "Support bcm28155_ap" 579 select CPU_V7A 580 imply CRC32_VERIFY 581 imply FAT_WRITE 582 583config TARGET_BCMCYGNUS 584 bool "Support bcmcygnus" 585 select CPU_V7A 586 imply BCM_SF2_ETH 587 imply BCM_SF2_ETH_GMAC 588 imply CMD_HASH 589 imply CRC32_VERIFY 590 imply FAT_WRITE 591 imply HASH_VERIFY 592 imply NETDEVICES 593 594config TARGET_BCMNSP 595 bool "Support bcmnsp" 596 select CPU_V7A 597 598config TARGET_BCMNS2 599 bool "Support Broadcom Northstar2" 600 select ARM64 601 help 602 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 603 ARMv8 Cortex-A57 processors targeting a broad range of networking 604 applications 605 606config ARCH_EXYNOS 607 bool "Samsung EXYNOS" 608 select DM 609 select DM_GPIO 610 select DM_I2C 611 select DM_KEYBOARD 612 select DM_SERIAL 613 select DM_SPI 614 select DM_SPI_FLASH 615 select SPI 616 imply SYS_THUMB_BUILD 617 imply CMD_DM 618 imply FAT_WRITE 619 620config ARCH_S5PC1XX 621 bool "Samsung S5PC1XX" 622 select CPU_V7A 623 select DM 624 select DM_GPIO 625 select DM_I2C 626 select DM_SERIAL 627 imply CMD_DM 628 629config ARCH_HIGHBANK 630 bool "Calxeda Highbank" 631 select CPU_V7A 632 select PL011_SERIAL 633 634config ARCH_INTEGRATOR 635 bool "ARM Ltd. Integrator family" 636 select DM 637 select DM_SERIAL 638 select PL01X_SERIAL 639 imply CMD_DM 640 641config ARCH_KEYSTONE 642 bool "TI Keystone" 643 select CMD_POWEROFF 644 select CPU_V7A 645 select SUPPORT_SPL 646 select SYS_ARCH_TIMER 647 select SYS_THUMB_BUILD 648 imply CMD_MTDPARTS 649 imply CMD_SAVES 650 imply FIT 651 652config ARCH_K3 653 bool "Texas Instruments' K3 Architecture" 654 select SPL 655 select SUPPORT_SPL 656 select FIT 657 658config ARCH_OMAP2PLUS 659 bool "TI OMAP2+" 660 select CPU_V7A 661 select SPL_BOARD_INIT if SPL 662 select SPL_STACK_R if SPL 663 select SUPPORT_SPL 664 imply FIT 665 666config ARCH_MESON 667 bool "Amlogic Meson" 668 imply DISTRO_DEFAULTS 669 help 670 Support for the Meson SoC family developed by Amlogic Inc., 671 targeted at media players and tablet computers. We currently 672 support the S905 (GXBaby) 64-bit SoC. 673 674config ARCH_MEDIATEK 675 bool "MediaTek SoCs" 676 select BINMAN 677 select DM 678 select OF_CONTROL 679 select SPL_DM if SPL 680 select SPL_LIBCOMMON_SUPPORT if SPL 681 select SPL_LIBGENERIC_SUPPORT if SPL 682 select SPL_OF_CONTROL if SPL 683 select SUPPORT_SPL 684 help 685 Support for the MediaTek SoCs family developed by MediaTek Inc. 686 Please refer to doc/README.mediatek for more information. 687 688config ARCH_LPC32XX 689 bool "NXP LPC32xx platform" 690 select CPU_ARM926EJS 691 select DM 692 select DM_GPIO 693 select DM_SERIAL 694 select SPL_DM if SPL 695 select SUPPORT_SPL 696 imply CMD_DM 697 698config ARCH_IMX8 699 bool "NXP i.MX8 platform" 700 select ARM64 701 select DM 702 select OF_CONTROL 703 704config ARCH_IMX8M 705 bool "NXP i.MX8M platform" 706 select ARM64 707 select DM 708 select SUPPORT_SPL 709 imply CMD_DM 710 711config ARCH_MX23 712 bool "NXP i.MX23 family" 713 select CPU_ARM926EJS 714 select PL011_SERIAL 715 select SUPPORT_SPL 716 717config ARCH_MX25 718 bool "NXP MX25" 719 select CPU_ARM926EJS 720 imply MXC_GPIO 721 722config ARCH_MX28 723 bool "NXP i.MX28 family" 724 select CPU_ARM926EJS 725 select PL011_SERIAL 726 select SUPPORT_SPL 727 728config ARCH_MX31 729 bool "NXP i.MX31 family" 730 select CPU_ARM1136 731 732config ARCH_MX7ULP 733 bool "NXP MX7ULP" 734 select CPU_V7A 735 select ROM_UNIFIED_SECTIONS 736 imply MXC_GPIO 737 738config ARCH_MX7 739 bool "Freescale MX7" 740 select ARCH_MISC_INIT 741 select BOARD_EARLY_INIT_F 742 select CPU_V7A 743 select SYS_FSL_HAS_SEC if SECURE_BOOT 744 select SYS_FSL_SEC_COMPAT_4 745 select SYS_FSL_SEC_LE 746 imply MXC_GPIO 747 748config ARCH_MX6 749 bool "Freescale MX6" 750 select CPU_V7A 751 select SYS_FSL_HAS_SEC if SECURE_BOOT 752 select SYS_FSL_SEC_COMPAT_4 753 select SYS_FSL_SEC_LE 754 select SYS_THUMB_BUILD if SPL 755 imply MXC_GPIO 756 757if ARCH_MX6 758config SPL_LDSCRIPT 759 default "arch/arm/mach-omap2/u-boot-spl.lds" 760endif 761 762config ARCH_MX5 763 bool "Freescale MX5" 764 select BOARD_EARLY_INIT_F 765 select CPU_V7A 766 imply MXC_GPIO 767 768config ARCH_OWL 769 bool "Actions Semi OWL SoCs" 770 select ARM64 771 select DM 772 select DM_SERIAL 773 select OF_CONTROL 774 imply CMD_DM 775 776config ARCH_QEMU 777 bool "QEMU Virtual Platform" 778 select DM 779 select DM_SERIAL 780 select OF_CONTROL 781 select PL01X_SERIAL 782 imply CMD_DM 783 imply DM_RTC 784 imply RTC_PL031 785 786config ARCH_RMOBILE 787 bool "Renesas ARM SoCs" 788 select BOARD_EARLY_INIT_F 789 select DM 790 select DM_SERIAL 791 imply CMD_DM 792 imply FAT_WRITE 793 imply SYS_THUMB_BUILD 794 imply ARCH_MISC_INIT if DISPLAY_CPUINFO 795 796config TARGET_S32V234EVB 797 bool "Support s32v234evb" 798 select ARM64 799 select SYS_FSL_ERRATUM_ESDHC111 800 801config ARCH_SNAPDRAGON 802 bool "Qualcomm Snapdragon SoCs" 803 select ARM64 804 select DM 805 select DM_GPIO 806 select DM_SERIAL 807 select MSM_SMEM 808 select OF_CONTROL 809 select OF_SEPARATE 810 select SMEM 811 select SPMI 812 imply CMD_DM 813 814config ARCH_SOCFPGA 815 bool "Altera SOCFPGA family" 816 select ARCH_EARLY_INIT_R 817 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 818 select ARM64 if TARGET_SOCFPGA_STRATIX10 819 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 820 select DM 821 select DM_SERIAL 822 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 823 select OF_CONTROL 824 select SPL_DM_RESET if DM_RESET 825 select SPL_DM_SERIAL 826 select SPL_LIBCOMMON_SUPPORT 827 select SPL_LIBGENERIC_SUPPORT 828 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 829 select SPL_OF_CONTROL 830 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 831 select SPL_SERIAL_SUPPORT 832 select SPL_WATCHDOG_SUPPORT 833 select SUPPORT_SPL 834 select SYS_NS16550 835 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 836 imply CMD_DM 837 imply CMD_MTDPARTS 838 imply CRC32_VERIFY 839 imply DM_SPI 840 imply DM_SPI_FLASH 841 imply FAT_WRITE 842 imply SPL_LIBDISK_SUPPORT 843 imply SPL_MMC_SUPPORT 844 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 845 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 846 imply SPL_SPI_FLASH_SUPPORT 847 imply SPL_SPI_SUPPORT 848 849config ARCH_SUNXI 850 bool "Support sunxi (Allwinner) SoCs" 851 select BINMAN 852 select CMD_GPIO 853 select CMD_MMC if MMC 854 select CMD_USB if DISTRO_DEFAULTS 855 select CLK 856 select DM 857 select DM_ETH 858 select DM_GPIO 859 select DM_KEYBOARD 860 select DM_SERIAL 861 select DM_USB if DISTRO_DEFAULTS 862 select OF_BOARD_SETUP 863 select OF_CONTROL 864 select OF_SEPARATE 865 select SPECIFY_CONSOLE_INDEX 866 select SPL_STACK_R if SPL 867 select SPL_SYS_MALLOC_SIMPLE if SPL 868 select SPL_SYS_THUMB_BUILD if !ARM64 869 select SYS_NS16550 870 select SYS_THUMB_BUILD if !ARM64 871 select USB if DISTRO_DEFAULTS 872 select USB_KEYBOARD if DISTRO_DEFAULTS 873 select USB_STORAGE if DISTRO_DEFAULTS 874 select USE_TINY_PRINTF 875 imply CMD_DM 876 imply CMD_GPT 877 imply CMD_UBI if NAND 878 imply DISTRO_DEFAULTS 879 imply FAT_WRITE 880 imply FIT 881 imply OF_LIBFDT_OVERLAY 882 imply PRE_CONSOLE_BUFFER 883 imply SPL_GPIO_SUPPORT 884 imply SPL_LIBCOMMON_SUPPORT 885 imply SPL_LIBGENERIC_SUPPORT 886 imply SPL_MMC_SUPPORT if MMC 887 imply SPL_POWER_SUPPORT 888 imply SPL_SERIAL_SUPPORT 889 imply USB_GADGET 890 891config ARCH_VERSAL 892 bool "Support Xilinx Versal Platform" 893 select ARM64 894 select CLK 895 select DM 896 select DM_ETH if NET 897 select DM_MMC if MMC 898 select DM_SERIAL 899 select OF_CONTROL 900 901config ARCH_VF610 902 bool "Freescale Vybrid" 903 select CPU_V7A 904 select SYS_FSL_ERRATUM_ESDHC111 905 imply CMD_MTDPARTS 906 imply NAND 907 908config ARCH_ZYNQ 909 bool "Xilinx Zynq based platform" 910 select BOARD_EARLY_INIT_F if WDT 911 select CLK 912 select CLK_ZYNQ 913 select CPU_V7A 914 select DM 915 select DM_ETH if NET 916 select DM_MMC if MMC 917 select DM_SERIAL 918 select DM_SPI 919 select DM_SPI_FLASH 920 select DM_USB if USB 921 select OF_CONTROL 922 select SPI 923 select SPL_BOARD_INIT if SPL 924 select SPL_CLK if SPL 925 select SPL_DM if SPL 926 select SPL_OF_CONTROL if SPL 927 select SPL_SEPARATE_BSS if SPL 928 select SUPPORT_SPL 929 imply ARCH_EARLY_INIT_R 930 imply BOARD_LATE_INIT 931 imply CMD_CLK 932 imply CMD_DM 933 imply CMD_SPL 934 imply FAT_WRITE 935 936config ARCH_ZYNQMP_R5 937 bool "Xilinx ZynqMP R5 based platform" 938 select CLK 939 select CPU_V7R 940 select DM 941 select DM_ETH if NET 942 select DM_MMC if MMC 943 select DM_SERIAL 944 select OF_CONTROL 945 imply CMD_DM 946 imply DM_USB_GADGET 947 948config ARCH_ZYNQMP 949 bool "Xilinx ZynqMP based platform" 950 select ARM64 951 select CLK 952 select DM 953 select DM_ETH if NET 954 select DM_MMC if MMC 955 select DM_SERIAL 956 select DM_SPI if SPI 957 select DM_SPI_FLASH if DM_SPI 958 select DM_USB if USB 959 select OF_CONTROL 960 select SPL_BOARD_INIT if SPL 961 select SPL_CLK if SPL 962 select SPL_SEPARATE_BSS if SPL 963 select SUPPORT_SPL 964 imply BOARD_LATE_INIT 965 imply CMD_DM 966 imply FAT_WRITE 967 imply MP 968 imply DM_USB_GADGET 969 970config TEGRA 971 bool "NVIDIA Tegra" 972 imply DISTRO_DEFAULTS 973 imply FAT_WRITE 974 975config TARGET_VEXPRESS64_AEMV8A 976 bool "Support vexpress_aemv8a" 977 select ARM64 978 select PL01X_SERIAL 979 980config TARGET_VEXPRESS64_BASE_FVP 981 bool "Support Versatile Express ARMv8a FVP BASE model" 982 select ARM64 983 select PL01X_SERIAL 984 select SEMIHOSTING 985 986config TARGET_VEXPRESS64_BASE_FVP_DRAM 987 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 988 select ARM64 989 select PL01X_SERIAL 990 help 991 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 992 the default config to allow the user to load the images directly into 993 DRAM using model parameters rather than by using semi-hosting to load 994 the files from the host filesystem. 995 996config TARGET_VEXPRESS64_JUNO 997 bool "Support Versatile Express Juno Development Platform" 998 select ARM64 999 select PL01X_SERIAL 1000 1001config TARGET_LS2080A_EMU 1002 bool "Support ls2080a_emu" 1003 select ARCH_LS2080A 1004 select ARCH_MISC_INIT 1005 select ARM64 1006 select ARMV8_MULTIENTRY 1007 select FSL_DDR_SYNC_REFRESH 1008 help 1009 Support for Freescale LS2080A_EMU platform 1010 The LS2080A Development System (EMULATOR) is a pre silicon 1011 development platform that supports the QorIQ LS2080A 1012 Layerscape Architecture processor. 1013 1014config TARGET_LS2080A_SIMU 1015 bool "Support ls2080a_simu" 1016 select ARCH_LS2080A 1017 select ARCH_MISC_INIT 1018 select ARM64 1019 select ARMV8_MULTIENTRY 1020 help 1021 Support for Freescale LS2080A_SIMU platform 1022 The LS2080A Development System (QDS) is a pre silicon 1023 development platform that supports the QorIQ LS2080A 1024 Layerscape Architecture processor. 1025 1026config TARGET_LS1088AQDS 1027 bool "Support ls1088aqds" 1028 select ARCH_LS1088A 1029 select ARCH_MISC_INIT 1030 select ARM64 1031 select ARMV8_MULTIENTRY 1032 select BOARD_LATE_INIT 1033 select SUPPORT_SPL 1034 select FSL_DDR_INTERACTIVE if !SD_BOOT 1035 help 1036 Support for NXP LS1088AQDS platform 1037 The LS1088A Development System (QDS) is a high-performance 1038 development platform that supports the QorIQ LS1088A 1039 Layerscape Architecture processor. 1040 1041config TARGET_LS2080AQDS 1042 bool "Support ls2080aqds" 1043 select ARCH_LS2080A 1044 select ARCH_MISC_INIT 1045 select ARM64 1046 select ARMV8_MULTIENTRY 1047 select BOARD_LATE_INIT 1048 select SUPPORT_SPL 1049 imply SCSI 1050 imply SCSI_AHCI 1051 select FSL_DDR_BIST 1052 select FSL_DDR_INTERACTIVE if !SPL 1053 help 1054 Support for Freescale LS2080AQDS platform 1055 The LS2080A Development System (QDS) is a high-performance 1056 development platform that supports the QorIQ LS2080A 1057 Layerscape Architecture processor. 1058 1059config TARGET_LS2080ARDB 1060 bool "Support ls2080ardb" 1061 select ARCH_LS2080A 1062 select ARCH_MISC_INIT 1063 select ARM64 1064 select ARMV8_MULTIENTRY 1065 select BOARD_LATE_INIT 1066 select SUPPORT_SPL 1067 select FSL_DDR_BIST 1068 select FSL_DDR_INTERACTIVE if !SPL 1069 imply SCSI 1070 imply SCSI_AHCI 1071 help 1072 Support for Freescale LS2080ARDB platform. 1073 The LS2080A Reference design board (RDB) is a high-performance 1074 development platform that supports the QorIQ LS2080A 1075 Layerscape Architecture processor. 1076 1077config TARGET_LS2081ARDB 1078 bool "Support ls2081ardb" 1079 select ARCH_LS2080A 1080 select ARCH_MISC_INIT 1081 select ARM64 1082 select ARMV8_MULTIENTRY 1083 select BOARD_LATE_INIT 1084 select SUPPORT_SPL 1085 help 1086 Support for Freescale LS2081ARDB platform. 1087 The LS2081A Reference design board (RDB) is a high-performance 1088 development platform that supports the QorIQ LS2081A/LS2041A 1089 Layerscape Architecture processor. 1090 1091config TARGET_LX2160ARDB 1092 bool "Support lx2160ardb" 1093 select ARCH_LX2160A 1094 select ARCH_MISC_INIT 1095 select ARM64 1096 select ARMV8_MULTIENTRY 1097 select BOARD_LATE_INIT 1098 help 1099 Support for NXP LX2160ARDB platform. 1100 The lx2160ardb (LX2160A Reference design board (RDB) 1101 is a high-performance development platform that supports the 1102 QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor. 1103 1104config TARGET_LX2160AQDS 1105 bool "Support lx2160aqds" 1106 select ARCH_LX2160A 1107 select ARCH_MISC_INIT 1108 select ARM64 1109 select ARMV8_MULTIENTRY 1110 select BOARD_LATE_INIT 1111 help 1112 Support for NXP LX2160AQDS platform. 1113 The lx2160aqds (LX2160A QorIQ Development System (QDS) 1114 is a high-performance development platform that supports the 1115 QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor. 1116 1117config TARGET_HIKEY 1118 bool "Support HiKey 96boards Consumer Edition Platform" 1119 select ARM64 1120 select DM 1121 select DM_GPIO 1122 select DM_SERIAL 1123 select OF_CONTROL 1124 select PL01X_SERIAL 1125 select SPECIFY_CONSOLE_INDEX 1126 imply CMD_DM 1127 help 1128 Support for HiKey 96boards platform. It features a HI6220 1129 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1130 1131config TARGET_POPLAR 1132 bool "Support Poplar 96boards Enterprise Edition Platform" 1133 select ARM64 1134 select DM 1135 select DM_SERIAL 1136 select DM_USB 1137 select OF_CONTROL 1138 select PL01X_SERIAL 1139 imply CMD_DM 1140 help 1141 Support for Poplar 96boards EE platform. It features a HI3798cv200 1142 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1143 making it capable of running any commercial set-top solution based on 1144 Linux or Android. 1145 1146config TARGET_LS1012AQDS 1147 bool "Support ls1012aqds" 1148 select ARCH_LS1012A 1149 select ARM64 1150 select BOARD_LATE_INIT 1151 help 1152 Support for Freescale LS1012AQDS platform. 1153 The LS1012A Development System (QDS) is a high-performance 1154 development platform that supports the QorIQ LS1012A 1155 Layerscape Architecture processor. 1156 1157config TARGET_LS1012ARDB 1158 bool "Support ls1012ardb" 1159 select ARCH_LS1012A 1160 select ARM64 1161 select BOARD_LATE_INIT 1162 imply SCSI 1163 imply SCSI_AHCI 1164 help 1165 Support for Freescale LS1012ARDB platform. 1166 The LS1012A Reference design board (RDB) is a high-performance 1167 development platform that supports the QorIQ LS1012A 1168 Layerscape Architecture processor. 1169 1170config TARGET_LS1012A2G5RDB 1171 bool "Support ls1012a2g5rdb" 1172 select ARCH_LS1012A 1173 select ARM64 1174 select BOARD_LATE_INIT 1175 imply SCSI 1176 help 1177 Support for Freescale LS1012A2G5RDB platform. 1178 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1179 development platform that supports the QorIQ LS1012A 1180 Layerscape Architecture processor. 1181 1182config TARGET_LS1012AFRWY 1183 bool "Support ls1012afrwy" 1184 select ARCH_LS1012A 1185 select ARM64 1186 select BOARD_LATE_INIT 1187 imply SCSI 1188 imply SCSI_AHCI 1189 help 1190 Support for Freescale LS1012AFRWY platform. 1191 The LS1012A FRWY board (FRWY) is a high-performance 1192 development platform that supports the QorIQ LS1012A 1193 Layerscape Architecture processor. 1194 1195config TARGET_LS1012AFRDM 1196 bool "Support ls1012afrdm" 1197 select ARCH_LS1012A 1198 select ARM64 1199 help 1200 Support for Freescale LS1012AFRDM platform. 1201 The LS1012A Freedom board (FRDM) is a high-performance 1202 development platform that supports the QorIQ LS1012A 1203 Layerscape Architecture processor. 1204 1205config TARGET_LS1088ARDB 1206 bool "Support ls1088ardb" 1207 select ARCH_LS1088A 1208 select ARCH_MISC_INIT 1209 select ARM64 1210 select ARMV8_MULTIENTRY 1211 select BOARD_LATE_INIT 1212 select SUPPORT_SPL 1213 select FSL_DDR_INTERACTIVE if !SD_BOOT 1214 help 1215 Support for NXP LS1088ARDB platform. 1216 The LS1088A Reference design board (RDB) is a high-performance 1217 development platform that supports the QorIQ LS1088A 1218 Layerscape Architecture processor. 1219 1220config TARGET_LS1021AQDS 1221 bool "Support ls1021aqds" 1222 select ARCH_LS1021A 1223 select ARCH_SUPPORT_PSCI 1224 select BOARD_EARLY_INIT_F 1225 select BOARD_LATE_INIT 1226 select CPU_V7A 1227 select CPU_V7_HAS_NONSEC 1228 select CPU_V7_HAS_VIRT 1229 select LS1_DEEP_SLEEP 1230 select SUPPORT_SPL 1231 select SYS_FSL_DDR 1232 select FSL_DDR_INTERACTIVE 1233 imply SCSI 1234 1235config TARGET_LS1021ATWR 1236 bool "Support ls1021atwr" 1237 select ARCH_LS1021A 1238 select ARCH_SUPPORT_PSCI 1239 select BOARD_EARLY_INIT_F 1240 select BOARD_LATE_INIT 1241 select CPU_V7A 1242 select CPU_V7_HAS_NONSEC 1243 select CPU_V7_HAS_VIRT 1244 select LS1_DEEP_SLEEP 1245 select SUPPORT_SPL 1246 imply SCSI 1247 1248config TARGET_LS1021AIOT 1249 bool "Support ls1021aiot" 1250 select ARCH_LS1021A 1251 select ARCH_SUPPORT_PSCI 1252 select BOARD_LATE_INIT 1253 select CPU_V7A 1254 select CPU_V7_HAS_NONSEC 1255 select CPU_V7_HAS_VIRT 1256 select SUPPORT_SPL 1257 imply SCSI 1258 help 1259 Support for Freescale LS1021AIOT platform. 1260 The LS1021A Freescale board (IOT) is a high-performance 1261 development platform that supports the QorIQ LS1021A 1262 Layerscape Architecture processor. 1263 1264config TARGET_LS1043AQDS 1265 bool "Support ls1043aqds" 1266 select ARCH_LS1043A 1267 select ARM64 1268 select ARMV8_MULTIENTRY 1269 select BOARD_EARLY_INIT_F 1270 select BOARD_LATE_INIT 1271 select SUPPORT_SPL 1272 select FSL_DDR_INTERACTIVE if !SPL 1273 imply SCSI 1274 imply SCSI_AHCI 1275 help 1276 Support for Freescale LS1043AQDS platform. 1277 1278config TARGET_LS1043ARDB 1279 bool "Support ls1043ardb" 1280 select ARCH_LS1043A 1281 select ARM64 1282 select ARMV8_MULTIENTRY 1283 select BOARD_EARLY_INIT_F 1284 select BOARD_LATE_INIT 1285 select SUPPORT_SPL 1286 help 1287 Support for Freescale LS1043ARDB platform. 1288 1289config TARGET_LS1046AQDS 1290 bool "Support ls1046aqds" 1291 select ARCH_LS1046A 1292 select ARM64 1293 select ARMV8_MULTIENTRY 1294 select BOARD_EARLY_INIT_F 1295 select BOARD_LATE_INIT 1296 select DM_SPI_FLASH if DM_SPI 1297 select SUPPORT_SPL 1298 select FSL_DDR_BIST if !SPL 1299 select FSL_DDR_INTERACTIVE if !SPL 1300 select FSL_DDR_INTERACTIVE if !SPL 1301 imply SCSI 1302 help 1303 Support for Freescale LS1046AQDS platform. 1304 The LS1046A Development System (QDS) is a high-performance 1305 development platform that supports the QorIQ LS1046A 1306 Layerscape Architecture processor. 1307 1308config TARGET_LS1046ARDB 1309 bool "Support ls1046ardb" 1310 select ARCH_LS1046A 1311 select ARM64 1312 select ARMV8_MULTIENTRY 1313 select BOARD_EARLY_INIT_F 1314 select BOARD_LATE_INIT 1315 select DM_SPI_FLASH if DM_SPI 1316 select POWER_MC34VR500 1317 select SUPPORT_SPL 1318 select FSL_DDR_BIST 1319 select FSL_DDR_INTERACTIVE if !SPL 1320 imply SCSI 1321 help 1322 Support for Freescale LS1046ARDB platform. 1323 The LS1046A Reference Design Board (RDB) is a high-performance 1324 development platform that supports the QorIQ LS1046A 1325 Layerscape Architecture processor. 1326 1327config TARGET_H2200 1328 bool "Support h2200" 1329 select CPU_PXA 1330 1331config TARGET_ZIPITZ2 1332 bool "Support zipitz2" 1333 select CPU_PXA 1334 1335config TARGET_COLIBRI_PXA270 1336 bool "Support colibri_pxa270" 1337 select CPU_PXA 1338 1339config ARCH_UNIPHIER 1340 bool "Socionext UniPhier SoCs" 1341 select BOARD_LATE_INIT 1342 select DM 1343 select DM_GPIO 1344 select DM_I2C 1345 select DM_MMC 1346 select DM_RESET 1347 select DM_SERIAL 1348 select DM_USB 1349 select OF_BOARD_SETUP 1350 select OF_CONTROL 1351 select OF_LIBFDT 1352 select PINCTRL 1353 select SPL_BOARD_INIT if SPL 1354 select SPL_DM if SPL 1355 select SPL_LIBCOMMON_SUPPORT if SPL 1356 select SPL_LIBGENERIC_SUPPORT if SPL 1357 select SPL_OF_CONTROL if SPL 1358 select SPL_PINCTRL if SPL 1359 select SUPPORT_SPL 1360 imply CMD_DM 1361 imply DISTRO_DEFAULTS 1362 imply FAT_WRITE 1363 help 1364 Support for UniPhier SoC family developed by Socionext Inc. 1365 (formerly, System LSI Business Division of Panasonic Corporation) 1366 1367config STM32 1368 bool "Support STMicroelectronics STM32 MCU with cortex M" 1369 select CPU_V7M 1370 select DM 1371 select DM_SERIAL 1372 imply CMD_DM 1373 1374config ARCH_STI 1375 bool "Support STMicrolectronics SoCs" 1376 select BLK 1377 select CPU_V7A 1378 select DM 1379 select DM_MMC 1380 select DM_RESET 1381 select DM_SERIAL 1382 imply CMD_DM 1383 help 1384 Support for STMicroelectronics STiH407/10 SoC family. 1385 This SoC is used on Linaro 96Board STiH410-B2260 1386 1387config ARCH_STM32MP 1388 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1389 select ARCH_MISC_INIT 1390 select BOARD_LATE_INIT 1391 select CLK 1392 select DM 1393 select DM_GPIO 1394 select DM_RESET 1395 select DM_SERIAL 1396 select MISC 1397 select OF_CONTROL 1398 select OF_LIBFDT 1399 select PINCTRL 1400 select REGMAP 1401 select SUPPORT_SPL 1402 select SYSCON 1403 select SYSRESET 1404 select SYS_THUMB_BUILD 1405 imply CMD_DM 1406 help 1407 Support for STM32MP SoC family developed by STMicroelectronics, 1408 MPUs based on ARM cortex A core 1409 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1410 BootLoader (FSBL) 1411 1412config ARCH_ROCKCHIP 1413 bool "Support Rockchip SoCs" 1414 select BLK 1415 select DM 1416 select DM_GPIO 1417 select DM_I2C 1418 select DM_MMC 1419 select DM_PWM 1420 select DM_REGULATOR 1421 select DM_SERIAL 1422 select DM_SPI 1423 select DM_SPI_FLASH 1424 select DM_USB if USB 1425 select ENABLE_ARM_SOC_BOOT0_HOOK 1426 select OF_CONTROL 1427 select SPI 1428 select SPL_DM if SPL 1429 select SPL_SYS_MALLOC_SIMPLE if SPL 1430 select SYS_MALLOC_F 1431 select SYS_THUMB_BUILD if !ARM64 1432 imply ADC 1433 imply CMD_DM 1434 imply DISTRO_DEFAULTS 1435 imply FAT_WRITE 1436 imply SARADC_ROCKCHIP 1437 imply SPL_SYSRESET 1438 imply SYS_NS16550 1439 imply TPL_SYSRESET 1440 imply USB_FUNCTION_FASTBOOT 1441 1442config TARGET_THUNDERX_88XX 1443 bool "Support ThunderX 88xx" 1444 select ARM64 1445 select OF_CONTROL 1446 select PL01X_SERIAL 1447 select SYS_CACHE_SHIFT_7 1448 1449config ARCH_ASPEED 1450 bool "Support Aspeed SoCs" 1451 select DM 1452 select OF_CONTROL 1453 imply CMD_DM 1454 1455endchoice 1456 1457config TI_SECURE_DEVICE 1458 bool "HS Device Type Support" 1459 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1460 help 1461 If a high secure (HS) device type is being used, this config 1462 must be set. This option impacts various aspects of the 1463 build system (to create signed boot images that can be 1464 authenticated) and the code. See the doc/README.ti-secure 1465 file for further details. 1466 1467source "arch/arm/mach-aspeed/Kconfig" 1468 1469source "arch/arm/mach-at91/Kconfig" 1470 1471source "arch/arm/mach-bcm283x/Kconfig" 1472 1473source "arch/arm/mach-bcmstb/Kconfig" 1474 1475source "arch/arm/mach-davinci/Kconfig" 1476 1477source "arch/arm/mach-exynos/Kconfig" 1478 1479source "arch/arm/mach-highbank/Kconfig" 1480 1481source "arch/arm/mach-integrator/Kconfig" 1482 1483source "arch/arm/mach-k3/Kconfig" 1484 1485source "arch/arm/mach-keystone/Kconfig" 1486 1487source "arch/arm/mach-kirkwood/Kconfig" 1488 1489source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1490 1491source "arch/arm/mach-mvebu/Kconfig" 1492 1493source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1494 1495source "arch/arm/mach-imx/mx2/Kconfig" 1496 1497source "arch/arm/mach-imx/mx3/Kconfig" 1498 1499source "arch/arm/mach-imx/mx5/Kconfig" 1500 1501source "arch/arm/mach-imx/mx6/Kconfig" 1502 1503source "arch/arm/mach-imx/mx7/Kconfig" 1504 1505source "arch/arm/mach-imx/mx7ulp/Kconfig" 1506 1507source "arch/arm/mach-imx/imx8/Kconfig" 1508 1509source "arch/arm/mach-imx/imx8m/Kconfig" 1510 1511source "arch/arm/mach-imx/mxs/Kconfig" 1512 1513source "arch/arm/mach-omap2/Kconfig" 1514 1515source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1516 1517source "arch/arm/mach-orion5x/Kconfig" 1518 1519source "arch/arm/mach-owl/Kconfig" 1520 1521source "arch/arm/mach-rmobile/Kconfig" 1522 1523source "arch/arm/mach-meson/Kconfig" 1524 1525source "arch/arm/mach-mediatek/Kconfig" 1526 1527source "arch/arm/mach-qemu/Kconfig" 1528 1529source "arch/arm/mach-rockchip/Kconfig" 1530 1531source "arch/arm/mach-s5pc1xx/Kconfig" 1532 1533source "arch/arm/mach-snapdragon/Kconfig" 1534 1535source "arch/arm/mach-socfpga/Kconfig" 1536 1537source "arch/arm/mach-sti/Kconfig" 1538 1539source "arch/arm/mach-stm32/Kconfig" 1540 1541source "arch/arm/mach-stm32mp/Kconfig" 1542 1543source "arch/arm/mach-sunxi/Kconfig" 1544 1545source "arch/arm/mach-tegra/Kconfig" 1546 1547source "arch/arm/mach-uniphier/Kconfig" 1548 1549source "arch/arm/cpu/armv7/vf610/Kconfig" 1550 1551source "arch/arm/mach-zynq/Kconfig" 1552 1553source "arch/arm/mach-zynqmp/Kconfig" 1554 1555source "arch/arm/mach-versal/Kconfig" 1556 1557source "arch/arm/mach-zynqmp-r5/Kconfig" 1558 1559source "arch/arm/cpu/armv7/Kconfig" 1560 1561source "arch/arm/cpu/armv8/Kconfig" 1562 1563source "arch/arm/mach-imx/Kconfig" 1564 1565source "board/bosch/shc/Kconfig" 1566source "board/CarMediaLab/flea3/Kconfig" 1567source "board/Marvell/aspenite/Kconfig" 1568source "board/Marvell/gplugd/Kconfig" 1569source "board/armadeus/apf27/Kconfig" 1570source "board/armltd/vexpress/Kconfig" 1571source "board/armltd/vexpress64/Kconfig" 1572source "board/broadcom/bcm23550_w1d/Kconfig" 1573source "board/broadcom/bcm28155_ap/Kconfig" 1574source "board/broadcom/bcm963158/Kconfig" 1575source "board/broadcom/bcm968580xref/Kconfig" 1576source "board/broadcom/bcmcygnus/Kconfig" 1577source "board/broadcom/bcmnsp/Kconfig" 1578source "board/broadcom/bcmns2/Kconfig" 1579source "board/cavium/thunderx/Kconfig" 1580source "board/cirrus/edb93xx/Kconfig" 1581source "board/eets/pdu001/Kconfig" 1582source "board/emulation/qemu-arm/Kconfig" 1583source "board/freescale/ls2080a/Kconfig" 1584source "board/freescale/ls2080aqds/Kconfig" 1585source "board/freescale/ls2080ardb/Kconfig" 1586source "board/freescale/ls1088a/Kconfig" 1587source "board/freescale/ls1021aqds/Kconfig" 1588source "board/freescale/ls1043aqds/Kconfig" 1589source "board/freescale/ls1021atwr/Kconfig" 1590source "board/freescale/ls1021aiot/Kconfig" 1591source "board/freescale/ls1046aqds/Kconfig" 1592source "board/freescale/ls1043ardb/Kconfig" 1593source "board/freescale/ls1046ardb/Kconfig" 1594source "board/freescale/ls1012aqds/Kconfig" 1595source "board/freescale/ls1012ardb/Kconfig" 1596source "board/freescale/ls1012afrdm/Kconfig" 1597source "board/freescale/lx2160a/Kconfig" 1598source "board/freescale/mx35pdk/Kconfig" 1599source "board/freescale/s32v234evb/Kconfig" 1600source "board/grinn/chiliboard/Kconfig" 1601source "board/gumstix/pepper/Kconfig" 1602source "board/h2200/Kconfig" 1603source "board/hisilicon/hikey/Kconfig" 1604source "board/hisilicon/poplar/Kconfig" 1605source "board/isee/igep003x/Kconfig" 1606source "board/phytec/pcm051/Kconfig" 1607source "board/silica/pengwyn/Kconfig" 1608source "board/spear/spear300/Kconfig" 1609source "board/spear/spear310/Kconfig" 1610source "board/spear/spear320/Kconfig" 1611source "board/spear/spear600/Kconfig" 1612source "board/spear/x600/Kconfig" 1613source "board/st/stv0991/Kconfig" 1614source "board/tcl/sl50/Kconfig" 1615source "board/ucRobotics/bubblegum_96/Kconfig" 1616source "board/birdland/bav335x/Kconfig" 1617source "board/toradex/colibri_pxa270/Kconfig" 1618source "board/vscom/baltos/Kconfig" 1619source "board/woodburn/Kconfig" 1620source "board/xilinx/Kconfig" 1621source "board/xilinx/zynq/Kconfig" 1622source "board/xilinx/zynqmp/Kconfig" 1623source "board/zipitz2/Kconfig" 1624 1625source "arch/arm/Kconfig.debug" 1626 1627endmenu 1628 1629config SPL_LDSCRIPT 1630 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1631 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1632 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1633 1634 1635