1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_VBAR 223 select HAS_THUMB2 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select THUMB2_KERNEL 231 select SYS_CACHE_SHIFT_5 232 select SYS_ARM_MPU 233 select SYS_THUMB_BUILD 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_CACHE_SHIFT_6 239 select SYS_ARM_MPU 240 select SYS_ARM_CACHE_CP15 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select CPU_ARM926EJS 431 select BOARD_EARLY_INIT_F 432 select ARCH_MISC_INIT 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select OF_CONTROL 437 select OF_SEPARATE 438 select DM 439 select DM_ETH 440 select DM_SERIAL 441 select DM_SPI 442 select DM_SPI_FLASH 443 select SPI 444 445config TARGET_DEVKIT3250 446 bool "Support devkit3250" 447 select CPU_ARM926EJS 448 select SUPPORT_SPL 449 450config TARGET_WORK_92105 451 bool "Support work_92105" 452 select CPU_ARM926EJS 453 select SUPPORT_SPL 454 455config TARGET_APF27 456 bool "Support apf27" 457 select CPU_ARM926EJS 458 select SUPPORT_SPL 459 460config ORION5X 461 bool "Marvell Orion" 462 select CPU_ARM926EJS 463 464config TARGET_SPEAR300 465 bool "Support spear300" 466 select CPU_ARM926EJS 467 select BOARD_EARLY_INIT_F 468 imply CMD_SAVES 469 select PL011_SERIAL 470 471config TARGET_SPEAR310 472 bool "Support spear310" 473 select CPU_ARM926EJS 474 select BOARD_EARLY_INIT_F 475 imply CMD_SAVES 476 select PL011_SERIAL 477 478config TARGET_SPEAR320 479 bool "Support spear320" 480 select CPU_ARM926EJS 481 select BOARD_EARLY_INIT_F 482 imply CMD_SAVES 483 select PL011_SERIAL 484 485config TARGET_SPEAR600 486 bool "Support spear600" 487 select CPU_ARM926EJS 488 select BOARD_EARLY_INIT_F 489 imply CMD_SAVES 490 select PL011_SERIAL 491 492config TARGET_STV0991 493 bool "Support stv0991" 494 select CPU_V7A 495 select DM 496 select DM_SERIAL 497 select DM_SPI 498 select DM_SPI_FLASH 499 select SPI 500 select SPI_FLASH 501 select PL01X_SERIAL 502 503config TARGET_X600 504 bool "Support x600" 505 select BOARD_LATE_INIT 506 select CPU_ARM926EJS 507 select SUPPORT_SPL 508 select PL011_SERIAL 509 510config TARGET_WOODBURN 511 bool "Support woodburn" 512 select CPU_ARM1136 513 514config TARGET_WOODBURN_SD 515 bool "Support woodburn_sd" 516 select CPU_ARM1136 517 select SUPPORT_SPL 518 519config TARGET_FLEA3 520 bool "Support flea3" 521 select CPU_ARM1136 522 523config TARGET_MX35PDK 524 bool "Support mx35pdk" 525 select BOARD_LATE_INIT 526 select CPU_ARM1136 527 528config ARCH_BCM283X 529 bool "Broadcom BCM283X family" 530 select DM 531 select DM_SERIAL 532 select DM_GPIO 533 select OF_CONTROL 534 select PL01X_SERIAL 535 select SERIAL_SEARCH_ALL 536 imply FAT_WRITE 537 538config TARGET_VEXPRESS_CA15_TC2 539 bool "Support vexpress_ca15_tc2" 540 select CPU_V7A 541 select CPU_V7_HAS_NONSEC 542 select CPU_V7_HAS_VIRT 543 select PL011_SERIAL 544 545config TARGET_VEXPRESS_CA5X2 546 bool "Support vexpress_ca5x2" 547 select CPU_V7A 548 select PL011_SERIAL 549 550config TARGET_VEXPRESS_CA9X4 551 bool "Support vexpress_ca9x4" 552 select CPU_V7A 553 select PL011_SERIAL 554 555config TARGET_BCM23550_W1D 556 bool "Support bcm23550_w1d" 557 select CPU_V7A 558 imply CRC32_VERIFY 559 imply FAT_WRITE 560 561config TARGET_BCM28155_AP 562 bool "Support bcm28155_ap" 563 select CPU_V7A 564 imply CRC32_VERIFY 565 imply FAT_WRITE 566 567config TARGET_BCMCYGNUS 568 bool "Support bcmcygnus" 569 select CPU_V7A 570 imply CRC32_VERIFY 571 imply CMD_HASH 572 imply FAT_WRITE 573 imply HASH_VERIFY 574 imply NETDEVICES 575 imply BCM_SF2_ETH 576 imply BCM_SF2_ETH_GMAC 577 578config TARGET_BCMNSP 579 bool "Support bcmnsp" 580 select CPU_V7A 581 582config TARGET_BCMNS2 583 bool "Support Broadcom Northstar2" 584 select ARM64 585 help 586 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 587 ARMv8 Cortex-A57 processors targeting a broad range of networking 588 applications 589 590config ARCH_EXYNOS 591 bool "Samsung EXYNOS" 592 select DM 593 select DM_I2C 594 select DM_SPI_FLASH 595 select DM_SERIAL 596 select DM_SPI 597 select DM_GPIO 598 select DM_KEYBOARD 599 select SPI 600 imply FAT_WRITE 601 602config ARCH_S5PC1XX 603 bool "Samsung S5PC1XX" 604 select CPU_V7A 605 select DM 606 select DM_SERIAL 607 select DM_GPIO 608 select DM_I2C 609 610config ARCH_HIGHBANK 611 bool "Calxeda Highbank" 612 select CPU_V7A 613 select PL011_SERIAL 614 615config ARCH_INTEGRATOR 616 bool "ARM Ltd. Integrator family" 617 select DM 618 select DM_SERIAL 619 select PL01X_SERIAL 620 621config ARCH_KEYSTONE 622 bool "TI Keystone" 623 select CPU_V7A 624 select SUPPORT_SPL 625 select SYS_THUMB_BUILD 626 select CMD_POWEROFF 627 select SYS_ARCH_TIMER 628 imply CMD_MTDPARTS 629 imply FIT 630 imply CMD_SAVES 631 632config ARCH_OMAP2PLUS 633 bool "TI OMAP2+" 634 select CPU_V7A 635 select SPL_BOARD_INIT if SPL 636 select SPL_STACK_R if SPL 637 select SUPPORT_SPL 638 imply FIT 639 640config ARCH_MESON 641 bool "Amlogic Meson" 642 imply DISTRO_DEFAULTS 643 help 644 Support for the Meson SoC family developed by Amlogic Inc., 645 targeted at media players and tablet computers. We currently 646 support the S905 (GXBaby) 64-bit SoC. 647 648config ARCH_MX8M 649 bool "NXP i.MX8M platform" 650 select ARM64 651 select DM 652 select SUPPORT_SPL 653 654config ARCH_MX23 655 bool "NXP i.MX23 family" 656 select CPU_ARM926EJS 657 select PL011_SERIAL 658 select SUPPORT_SPL 659 660config ARCH_MX25 661 bool "NXP MX25" 662 select CPU_ARM926EJS 663 imply MXC_GPIO 664 665config ARCH_MX28 666 bool "NXP i.MX28 family" 667 select CPU_ARM926EJS 668 select PL011_SERIAL 669 select SUPPORT_SPL 670 671config ARCH_MX31 672 bool "NXP i.MX31 family" 673 select CPU_ARM1136 674 675config ARCH_MX7ULP 676 bool "NXP MX7ULP" 677 select CPU_V7A 678 select ROM_UNIFIED_SECTIONS 679 imply MXC_GPIO 680 681config ARCH_MX7 682 bool "Freescale MX7" 683 select CPU_V7A 684 select SYS_FSL_HAS_SEC if SECURE_BOOT 685 select SYS_FSL_SEC_COMPAT_4 686 select SYS_FSL_SEC_LE 687 select BOARD_EARLY_INIT_F 688 select ARCH_MISC_INIT 689 imply MXC_GPIO 690 691config ARCH_MX6 692 bool "Freescale MX6" 693 select CPU_V7A 694 select SYS_FSL_HAS_SEC if SECURE_BOOT 695 select SYS_FSL_SEC_COMPAT_4 696 select SYS_FSL_SEC_LE 697 select SYS_THUMB_BUILD if SPL 698 imply MXC_GPIO 699 700if ARCH_MX6 701config SPL_LDSCRIPT 702 default "arch/arm/mach-omap2/u-boot-spl.lds" 703endif 704 705config ARCH_MX5 706 bool "Freescale MX5" 707 select CPU_V7A 708 select BOARD_EARLY_INIT_F 709 imply MXC_GPIO 710 711config ARCH_OWL 712 bool "Actions Semi OWL SoCs" 713 select ARM64 714 select DM 715 select DM_SERIAL 716 select OF_CONTROL 717 718config ARCH_QEMU 719 bool "QEMU Virtual Platform" 720 select DM 721 select DM_SERIAL 722 select OF_CONTROL 723 select PL01X_SERIAL 724 725config ARCH_RMOBILE 726 bool "Renesas ARM SoCs" 727 select DM 728 select DM_SERIAL 729 select BOARD_EARLY_INIT_F 730 imply FAT_WRITE 731 imply SYS_THUMB_BUILD 732 733config TARGET_S32V234EVB 734 bool "Support s32v234evb" 735 select ARM64 736 select SYS_FSL_ERRATUM_ESDHC111 737 738config ARCH_SNAPDRAGON 739 bool "Qualcomm Snapdragon SoCs" 740 select ARM64 741 select DM 742 select DM_GPIO 743 select DM_SERIAL 744 select SPMI 745 select OF_CONTROL 746 select OF_SEPARATE 747 748config ARCH_SOCFPGA 749 bool "Altera SOCFPGA family" 750 select ARCH_EARLY_INIT_R 751 select ARCH_MISC_INIT 752 select CPU_V7A 753 select DM 754 select DM_SERIAL 755 select ENABLE_ARM_SOC_BOOT0_HOOK 756 select OF_CONTROL 757 select SPL_LIBCOMMON_SUPPORT 758 select SPL_LIBDISK_SUPPORT 759 select SPL_LIBGENERIC_SUPPORT 760 select SPL_MMC_SUPPORT if DM_MMC 761 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 762 select SPL_OF_CONTROL 763 select SPL_SERIAL_SUPPORT 764 select SPL_DM_SERIAL 765 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 766 select SPL_SPI_SUPPORT if DM_SPI 767 select SPL_WATCHDOG_SUPPORT 768 select SUPPORT_SPL 769 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 770 select SYS_NS16550 771 select SYS_THUMB_BUILD 772 imply CMD_MTDPARTS 773 imply CRC32_VERIFY 774 imply DM_SPI 775 imply DM_SPI_FLASH 776 imply FAT_WRITE 777 imply HW_WATCHDOG 778 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 779 780config ARCH_SUNXI 781 bool "Support sunxi (Allwinner) SoCs" 782 select BINMAN 783 select CMD_GPIO 784 select CMD_MMC if MMC 785 select CMD_USB if DISTRO_DEFAULTS 786 select DM 787 select DM_ETH 788 select DM_GPIO 789 select DM_KEYBOARD 790 select DM_SERIAL 791 select DM_USB if DISTRO_DEFAULTS 792 select OF_BOARD_SETUP 793 select OF_CONTROL 794 select OF_SEPARATE 795 select SPECIFY_CONSOLE_INDEX 796 select SPL_STACK_R if SPL 797 select SPL_SYS_MALLOC_SIMPLE if SPL 798 select SYS_NS16550 799 select SPL_SYS_THUMB_BUILD if !ARM64 800 select SYS_THUMB_BUILD if !ARM64 801 select USB if DISTRO_DEFAULTS 802 select USB_STORAGE if DISTRO_DEFAULTS 803 select USB_KEYBOARD if DISTRO_DEFAULTS 804 select USE_TINY_PRINTF 805 imply CMD_GPT 806 imply DISTRO_DEFAULTS 807 imply FAT_WRITE 808 imply OF_LIBFDT_OVERLAY 809 imply PRE_CONSOLE_BUFFER 810 imply SPL_GPIO_SUPPORT 811 imply SPL_LIBCOMMON_SUPPORT 812 imply SPL_LIBDISK_SUPPORT 813 imply SPL_LIBGENERIC_SUPPORT 814 imply SPL_MMC_SUPPORT if MMC 815 imply SPL_POWER_SUPPORT 816 imply SPL_SERIAL_SUPPORT 817 imply USB_GADGET 818 819config ARCH_VF610 820 bool "Freescale Vybrid" 821 select CPU_V7A 822 select SYS_FSL_ERRATUM_ESDHC111 823 imply CMD_MTDPARTS 824 imply NAND 825 826config ARCH_ZYNQ 827 bool "Xilinx Zynq based platform" 828 select BOARD_LATE_INIT 829 select CPU_V7A 830 select SUPPORT_SPL 831 select OF_CONTROL 832 select SPL_BOARD_INIT if SPL 833 select BOARD_EARLY_INIT_F if WDT 834 select SPL_OF_CONTROL if SPL 835 select DM 836 select DM_ETH if NET 837 select SPL_DM if SPL 838 select DM_MMC if MMC 839 select DM_SPI 840 select DM_SERIAL 841 select DM_SPI_FLASH 842 select SPL_SEPARATE_BSS if SPL 843 select DM_USB if USB 844 select CLK 845 select SPL_CLK if SPL 846 select CLK_ZYNQ 847 select SPI 848 imply CMD_CLK 849 imply FAT_WRITE 850 imply CMD_SPL 851 imply ARCH_EARLY_INIT_R 852 853config ARCH_ZYNQMP_R5 854 bool "Xilinx ZynqMP R5 based platform" 855 select CPU_V7R 856 select OF_CONTROL 857 select DM 858 select DM_SERIAL 859 select CLK 860 861config ARCH_ZYNQMP 862 bool "Xilinx ZynqMP based platform" 863 select ARM64 864 select BOARD_LATE_INIT 865 select DM 866 select OF_CONTROL 867 select DM_SERIAL 868 select SUPPORT_SPL 869 select CLK 870 select SPL_BOARD_INIT if SPL 871 select SPL_CLK if SPL 872 select DM_USB if USB 873 imply FAT_WRITE 874 875config TEGRA 876 bool "NVIDIA Tegra" 877 imply DISTRO_DEFAULTS 878 imply FAT_WRITE 879 880config TARGET_VEXPRESS64_AEMV8A 881 bool "Support vexpress_aemv8a" 882 select ARM64 883 select PL01X_SERIAL 884 885config TARGET_VEXPRESS64_BASE_FVP 886 bool "Support Versatile Express ARMv8a FVP BASE model" 887 select ARM64 888 select SEMIHOSTING 889 select PL01X_SERIAL 890 891config TARGET_VEXPRESS64_BASE_FVP_DRAM 892 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 893 select ARM64 894 select PL01X_SERIAL 895 help 896 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 897 the default config to allow the user to load the images directly into 898 DRAM using model parameters rather than by using semi-hosting to load 899 the files from the host filesystem. 900 901config TARGET_VEXPRESS64_JUNO 902 bool "Support Versatile Express Juno Development Platform" 903 select ARM64 904 select PL01X_SERIAL 905 906config TARGET_LS2080A_EMU 907 bool "Support ls2080a_emu" 908 select ARCH_LS2080A 909 select ARM64 910 select ARMV8_MULTIENTRY 911 select ARCH_MISC_INIT 912 help 913 Support for Freescale LS2080A_EMU platform 914 The LS2080A Development System (EMULATOR) is a pre silicon 915 development platform that supports the QorIQ LS2080A 916 Layerscape Architecture processor. 917 918config TARGET_LS2080A_SIMU 919 bool "Support ls2080a_simu" 920 select ARCH_LS2080A 921 select ARM64 922 select ARMV8_MULTIENTRY 923 select ARCH_MISC_INIT 924 help 925 Support for Freescale LS2080A_SIMU platform 926 The LS2080A Development System (QDS) is a pre silicon 927 development platform that supports the QorIQ LS2080A 928 Layerscape Architecture processor. 929 930config TARGET_LS1088AQDS 931 bool "Support ls1088aqds" 932 select ARCH_LS1088A 933 select ARM64 934 select ARMV8_MULTIENTRY 935 select ARCH_MISC_INIT 936 select BOARD_LATE_INIT 937 select SUPPORT_SPL 938 help 939 Support for NXP LS1088AQDS platform 940 The LS1088A Development System (QDS) is a high-performance 941 development platform that supports the QorIQ LS1088A 942 Layerscape Architecture processor. 943 944config TARGET_LS2080AQDS 945 bool "Support ls2080aqds" 946 select ARCH_LS2080A 947 select ARM64 948 select ARMV8_MULTIENTRY 949 select BOARD_LATE_INIT 950 select SUPPORT_SPL 951 select ARCH_MISC_INIT 952 imply SCSI 953 imply SCSI_AHCI 954 help 955 Support for Freescale LS2080AQDS platform 956 The LS2080A Development System (QDS) is a high-performance 957 development platform that supports the QorIQ LS2080A 958 Layerscape Architecture processor. 959 960config TARGET_LS2080ARDB 961 bool "Support ls2080ardb" 962 select ARCH_LS2080A 963 select ARM64 964 select ARMV8_MULTIENTRY 965 select BOARD_LATE_INIT 966 select SUPPORT_SPL 967 select ARCH_MISC_INIT 968 imply SCSI 969 imply SCSI_AHCI 970 help 971 Support for Freescale LS2080ARDB platform. 972 The LS2080A Reference design board (RDB) is a high-performance 973 development platform that supports the QorIQ LS2080A 974 Layerscape Architecture processor. 975 976config TARGET_LS2081ARDB 977 bool "Support ls2081ardb" 978 select ARCH_LS2080A 979 select ARM64 980 select ARMV8_MULTIENTRY 981 select BOARD_LATE_INIT 982 select SUPPORT_SPL 983 select ARCH_MISC_INIT 984 help 985 Support for Freescale LS2081ARDB platform. 986 The LS2081A Reference design board (RDB) is a high-performance 987 development platform that supports the QorIQ LS2081A/LS2041A 988 Layerscape Architecture processor. 989 990config TARGET_HIKEY 991 bool "Support HiKey 96boards Consumer Edition Platform" 992 select ARM64 993 select DM 994 select DM_GPIO 995 select DM_SERIAL 996 select OF_CONTROL 997 select PL01X_SERIAL 998 select SPECIFY_CONSOLE_INDEX 999 help 1000 Support for HiKey 96boards platform. It features a HI6220 1001 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1002 1003config TARGET_POPLAR 1004 bool "Support Poplar 96boards Enterprise Edition Platform" 1005 select ARM64 1006 select DM 1007 select OF_CONTROL 1008 select DM_SERIAL 1009 select DM_USB 1010 select PL01X_SERIAL 1011 help 1012 Support for Poplar 96boards EE platform. It features a HI3798cv200 1013 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1014 making it capable of running any commercial set-top solution based on 1015 Linux or Android. 1016 1017config TARGET_LS1012AQDS 1018 bool "Support ls1012aqds" 1019 select ARCH_LS1012A 1020 select ARM64 1021 select BOARD_LATE_INIT 1022 help 1023 Support for Freescale LS1012AQDS platform. 1024 The LS1012A Development System (QDS) is a high-performance 1025 development platform that supports the QorIQ LS1012A 1026 Layerscape Architecture processor. 1027 1028config TARGET_LS1012ARDB 1029 bool "Support ls1012ardb" 1030 select ARCH_LS1012A 1031 select ARM64 1032 select BOARD_LATE_INIT 1033 imply SCSI 1034 imply SCSI_AHCI 1035 help 1036 Support for Freescale LS1012ARDB platform. 1037 The LS1012A Reference design board (RDB) is a high-performance 1038 development platform that supports the QorIQ LS1012A 1039 Layerscape Architecture processor. 1040 1041config TARGET_LS1012A2G5RDB 1042 bool "Support ls1012a2g5rdb" 1043 select ARCH_LS1012A 1044 select ARM64 1045 select BOARD_LATE_INIT 1046 imply SCSI 1047 help 1048 Support for Freescale LS1012A2G5RDB platform. 1049 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1050 development platform that supports the QorIQ LS1012A 1051 Layerscape Architecture processor. 1052 1053config TARGET_LS1012AFRWY 1054 bool "Support ls1012afrwy" 1055 select ARCH_LS1012A 1056 select BOARD_LATE_INIT 1057 select ARM64 1058 imply SCSI 1059 imply SCSI_AHCI 1060 help 1061 Support for Freescale LS1012AFRWY platform. 1062 The LS1012A FRWY board (FRWY) is a high-performance 1063 development platform that supports the QorIQ LS1012A 1064 Layerscape Architecture processor. 1065 1066config TARGET_LS1012AFRDM 1067 bool "Support ls1012afrdm" 1068 select ARCH_LS1012A 1069 select ARM64 1070 help 1071 Support for Freescale LS1012AFRDM platform. 1072 The LS1012A Freedom board (FRDM) is a high-performance 1073 development platform that supports the QorIQ LS1012A 1074 Layerscape Architecture processor. 1075 1076config TARGET_LS1088ARDB 1077 bool "Support ls1088ardb" 1078 select ARCH_LS1088A 1079 select ARM64 1080 select ARMV8_MULTIENTRY 1081 select ARCH_MISC_INIT 1082 select BOARD_LATE_INIT 1083 select SUPPORT_SPL 1084 help 1085 Support for NXP LS1088ARDB platform. 1086 The LS1088A Reference design board (RDB) is a high-performance 1087 development platform that supports the QorIQ LS1088A 1088 Layerscape Architecture processor. 1089 1090config TARGET_LS1021AQDS 1091 bool "Support ls1021aqds" 1092 select BOARD_LATE_INIT 1093 select CPU_V7A 1094 select CPU_V7_HAS_NONSEC 1095 select CPU_V7_HAS_VIRT 1096 select SUPPORT_SPL 1097 select ARCH_LS1021A 1098 select ARCH_SUPPORT_PSCI 1099 select LS1_DEEP_SLEEP 1100 select SYS_FSL_DDR 1101 select BOARD_EARLY_INIT_F 1102 imply SCSI 1103 1104config TARGET_LS1021ATWR 1105 bool "Support ls1021atwr" 1106 select BOARD_LATE_INIT 1107 select CPU_V7A 1108 select CPU_V7_HAS_NONSEC 1109 select CPU_V7_HAS_VIRT 1110 select SUPPORT_SPL 1111 select ARCH_LS1021A 1112 select ARCH_SUPPORT_PSCI 1113 select LS1_DEEP_SLEEP 1114 select BOARD_EARLY_INIT_F 1115 imply SCSI 1116 1117config TARGET_LS1021AIOT 1118 bool "Support ls1021aiot" 1119 select BOARD_LATE_INIT 1120 select CPU_V7A 1121 select CPU_V7_HAS_NONSEC 1122 select CPU_V7_HAS_VIRT 1123 select SUPPORT_SPL 1124 select ARCH_LS1021A 1125 select ARCH_SUPPORT_PSCI 1126 imply SCSI 1127 help 1128 Support for Freescale LS1021AIOT platform. 1129 The LS1021A Freescale board (IOT) is a high-performance 1130 development platform that supports the QorIQ LS1021A 1131 Layerscape Architecture processor. 1132 1133config TARGET_LS1043AQDS 1134 bool "Support ls1043aqds" 1135 select ARCH_LS1043A 1136 select ARM64 1137 select ARMV8_MULTIENTRY 1138 select BOARD_LATE_INIT 1139 select SUPPORT_SPL 1140 select BOARD_EARLY_INIT_F 1141 imply SCSI 1142 help 1143 Support for Freescale LS1043AQDS platform. 1144 1145config TARGET_LS1043ARDB 1146 bool "Support ls1043ardb" 1147 select ARCH_LS1043A 1148 select ARM64 1149 select ARMV8_MULTIENTRY 1150 select BOARD_LATE_INIT 1151 select SUPPORT_SPL 1152 select BOARD_EARLY_INIT_F 1153 imply SCSI 1154 help 1155 Support for Freescale LS1043ARDB platform. 1156 1157config TARGET_LS1046AQDS 1158 bool "Support ls1046aqds" 1159 select ARCH_LS1046A 1160 select ARM64 1161 select ARMV8_MULTIENTRY 1162 select BOARD_LATE_INIT 1163 select SUPPORT_SPL 1164 select DM_SPI_FLASH if DM_SPI 1165 select BOARD_EARLY_INIT_F 1166 imply SCSI 1167 help 1168 Support for Freescale LS1046AQDS platform. 1169 The LS1046A Development System (QDS) is a high-performance 1170 development platform that supports the QorIQ LS1046A 1171 Layerscape Architecture processor. 1172 1173config TARGET_LS1046ARDB 1174 bool "Support ls1046ardb" 1175 select ARCH_LS1046A 1176 select ARM64 1177 select ARMV8_MULTIENTRY 1178 select BOARD_LATE_INIT 1179 select SUPPORT_SPL 1180 select DM_SPI_FLASH if DM_SPI 1181 select POWER_MC34VR500 1182 select BOARD_EARLY_INIT_F 1183 imply SCSI 1184 help 1185 Support for Freescale LS1046ARDB platform. 1186 The LS1046A Reference Design Board (RDB) is a high-performance 1187 development platform that supports the QorIQ LS1046A 1188 Layerscape Architecture processor. 1189 1190config TARGET_H2200 1191 bool "Support h2200" 1192 select CPU_PXA 1193 1194config TARGET_ZIPITZ2 1195 bool "Support zipitz2" 1196 select CPU_PXA 1197 1198config TARGET_COLIBRI_PXA270 1199 bool "Support colibri_pxa270" 1200 select CPU_PXA 1201 1202config ARCH_UNIPHIER 1203 bool "Socionext UniPhier SoCs" 1204 select BOARD_LATE_INIT 1205 select DM 1206 select DM_GPIO 1207 select DM_I2C 1208 select DM_MMC 1209 select DM_RESET 1210 select DM_SERIAL 1211 select DM_USB 1212 select OF_CONTROL 1213 select OF_LIBFDT 1214 select PINCTRL 1215 select SPL_BOARD_INIT if SPL 1216 select SPL_DM if SPL 1217 select SPL_LIBCOMMON_SUPPORT if SPL 1218 select SPL_LIBGENERIC_SUPPORT if SPL 1219 select SPL_OF_CONTROL if SPL 1220 select SPL_PINCTRL if SPL 1221 select SUPPORT_SPL 1222 imply FAT_WRITE 1223 help 1224 Support for UniPhier SoC family developed by Socionext Inc. 1225 (formerly, System LSI Business Division of Panasonic Corporation) 1226 1227config STM32 1228 bool "Support STMicroelectronics STM32 MCU with cortex M" 1229 select CPU_V7M 1230 select DM 1231 select DM_SERIAL 1232 select SYS_THUMB_BUILD 1233 1234config ARCH_STI 1235 bool "Support STMicrolectronics SoCs" 1236 select CPU_V7A 1237 select DM 1238 select DM_SERIAL 1239 select BLK 1240 select DM_MMC 1241 select DM_RESET 1242 help 1243 Support for STMicroelectronics STiH407/10 SoC family. 1244 This SoC is used on Linaro 96Board STiH410-B2260 1245 1246config ARCH_STM32MP 1247 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1248 select ARCH_MISC_INIT 1249 select BOARD_LATE_INIT 1250 select CLK 1251 select DM 1252 select DM_GPIO 1253 select DM_RESET 1254 select DM_SERIAL 1255 select OF_CONTROL 1256 select OF_LIBFDT 1257 select MISC 1258 select PINCTRL 1259 select REGMAP 1260 select SUPPORT_SPL 1261 select SYSCON 1262 select SYSRESET 1263 select SYS_THUMB_BUILD 1264 help 1265 Support for STM32MP SoC family developed by STMicroelectronics, 1266 MPUs based on ARM cortex A core 1267 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1268 BootLoader (FSBL) 1269 1270config ARCH_ROCKCHIP 1271 bool "Support Rockchip SoCs" 1272 select OF_CONTROL 1273 select BLK 1274 select DM 1275 select SPL_DM if SPL 1276 select SYS_MALLOC_F 1277 select SYS_THUMB_BUILD if !ARM64 1278 select SPL_SYS_MALLOC_SIMPLE if SPL 1279 select DM_GPIO 1280 select DM_I2C 1281 select DM_MMC 1282 select DM_SERIAL 1283 select DM_SPI 1284 select DM_SPI_FLASH 1285 select DM_USB if USB 1286 select DM_PWM 1287 select DM_REGULATOR 1288 select ENABLE_ARM_SOC_BOOT0_HOOK 1289 select SPI 1290 imply DISTRO_DEFAULTS 1291 imply FAT_WRITE 1292 imply USB_FUNCTION_FASTBOOT 1293 imply SPL_SYSRESET 1294 imply TPL_SYSRESET 1295 imply ADC 1296 imply SARADC_ROCKCHIP 1297 imply SYS_NS16550 1298 1299config TARGET_THUNDERX_88XX 1300 bool "Support ThunderX 88xx" 1301 select ARM64 1302 select OF_CONTROL 1303 select SYS_CACHE_SHIFT_7 1304 select PL01X_SERIAL 1305 1306config ARCH_ASPEED 1307 bool "Support Aspeed SoCs" 1308 select OF_CONTROL 1309 select DM 1310 1311endchoice 1312 1313config TI_SECURE_DEVICE 1314 bool "HS Device Type Support" 1315 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1316 help 1317 If a high secure (HS) device type is being used, this config 1318 must be set. This option impacts various aspects of the 1319 build system (to create signed boot images that can be 1320 authenticated) and the code. See the doc/README.ti-secure 1321 file for further details. 1322 1323source "arch/arm/mach-aspeed/Kconfig" 1324 1325source "arch/arm/mach-at91/Kconfig" 1326 1327source "arch/arm/mach-bcm283x/Kconfig" 1328 1329source "arch/arm/mach-davinci/Kconfig" 1330 1331source "arch/arm/mach-exynos/Kconfig" 1332 1333source "arch/arm/mach-highbank/Kconfig" 1334 1335source "arch/arm/mach-integrator/Kconfig" 1336 1337source "arch/arm/mach-keystone/Kconfig" 1338 1339source "arch/arm/mach-kirkwood/Kconfig" 1340 1341source "arch/arm/mach-mvebu/Kconfig" 1342 1343source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1344 1345source "arch/arm/mach-imx/mx2/Kconfig" 1346 1347source "arch/arm/mach-imx/mx3/Kconfig" 1348 1349source "arch/arm/mach-imx/mx5/Kconfig" 1350 1351source "arch/arm/mach-imx/mx6/Kconfig" 1352 1353source "arch/arm/mach-imx/mx7/Kconfig" 1354 1355source "arch/arm/mach-imx/mx7ulp/Kconfig" 1356 1357source "arch/arm/mach-imx/mx8m/Kconfig" 1358 1359source "arch/arm/mach-imx/mxs/Kconfig" 1360 1361source "arch/arm/mach-omap2/Kconfig" 1362 1363source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1364 1365source "arch/arm/mach-orion5x/Kconfig" 1366 1367source "arch/arm/mach-owl/Kconfig" 1368 1369source "arch/arm/mach-rmobile/Kconfig" 1370 1371source "arch/arm/mach-meson/Kconfig" 1372 1373source "arch/arm/mach-qemu/Kconfig" 1374 1375source "arch/arm/mach-rockchip/Kconfig" 1376 1377source "arch/arm/mach-s5pc1xx/Kconfig" 1378 1379source "arch/arm/mach-snapdragon/Kconfig" 1380 1381source "arch/arm/mach-socfpga/Kconfig" 1382 1383source "arch/arm/mach-sti/Kconfig" 1384 1385source "arch/arm/mach-stm32/Kconfig" 1386 1387source "arch/arm/mach-stm32mp/Kconfig" 1388 1389source "arch/arm/mach-sunxi/Kconfig" 1390 1391source "arch/arm/mach-tegra/Kconfig" 1392 1393source "arch/arm/mach-uniphier/Kconfig" 1394 1395source "arch/arm/cpu/armv7/vf610/Kconfig" 1396 1397source "arch/arm/mach-zynq/Kconfig" 1398 1399source "arch/arm/mach-zynqmp-r5/Kconfig" 1400 1401source "arch/arm/cpu/armv7/Kconfig" 1402 1403source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1404 1405source "arch/arm/cpu/armv8/Kconfig" 1406 1407source "arch/arm/mach-imx/Kconfig" 1408 1409source "board/bosch/shc/Kconfig" 1410source "board/CarMediaLab/flea3/Kconfig" 1411source "board/Marvell/aspenite/Kconfig" 1412source "board/Marvell/gplugd/Kconfig" 1413source "board/armadeus/apf27/Kconfig" 1414source "board/armltd/vexpress/Kconfig" 1415source "board/armltd/vexpress64/Kconfig" 1416source "board/broadcom/bcm23550_w1d/Kconfig" 1417source "board/broadcom/bcm28155_ap/Kconfig" 1418source "board/broadcom/bcmcygnus/Kconfig" 1419source "board/broadcom/bcmnsp/Kconfig" 1420source "board/broadcom/bcmns2/Kconfig" 1421source "board/cavium/thunderx/Kconfig" 1422source "board/cirrus/edb93xx/Kconfig" 1423source "board/eets/pdu001/Kconfig" 1424source "board/freescale/ls2080a/Kconfig" 1425source "board/freescale/ls2080aqds/Kconfig" 1426source "board/freescale/ls2080ardb/Kconfig" 1427source "board/freescale/ls1088a/Kconfig" 1428source "board/freescale/ls1021aqds/Kconfig" 1429source "board/freescale/ls1043aqds/Kconfig" 1430source "board/freescale/ls1021atwr/Kconfig" 1431source "board/freescale/ls1021aiot/Kconfig" 1432source "board/freescale/ls1046aqds/Kconfig" 1433source "board/freescale/ls1043ardb/Kconfig" 1434source "board/freescale/ls1046ardb/Kconfig" 1435source "board/freescale/ls1012aqds/Kconfig" 1436source "board/freescale/ls1012ardb/Kconfig" 1437source "board/freescale/ls1012afrdm/Kconfig" 1438source "board/freescale/mx35pdk/Kconfig" 1439source "board/freescale/s32v234evb/Kconfig" 1440source "board/gdsys/a38x/Kconfig" 1441source "board/grinn/chiliboard/Kconfig" 1442source "board/gumstix/pepper/Kconfig" 1443source "board/h2200/Kconfig" 1444source "board/hisilicon/hikey/Kconfig" 1445source "board/hisilicon/poplar/Kconfig" 1446source "board/isee/igep003x/Kconfig" 1447source "board/phytec/pcm051/Kconfig" 1448source "board/silica/pengwyn/Kconfig" 1449source "board/spear/spear300/Kconfig" 1450source "board/spear/spear310/Kconfig" 1451source "board/spear/spear320/Kconfig" 1452source "board/spear/spear600/Kconfig" 1453source "board/spear/x600/Kconfig" 1454source "board/st/stv0991/Kconfig" 1455source "board/tcl/sl50/Kconfig" 1456source "board/ucRobotics/bubblegum_96/Kconfig" 1457source "board/birdland/bav335x/Kconfig" 1458source "board/timll/devkit3250/Kconfig" 1459source "board/toradex/colibri_pxa270/Kconfig" 1460source "board/vscom/baltos/Kconfig" 1461source "board/woodburn/Kconfig" 1462source "board/work-microwave/work_92105/Kconfig" 1463source "board/xilinx/zynqmp/Kconfig" 1464source "board/zipitz2/Kconfig" 1465 1466source "arch/arm/Kconfig.debug" 1467 1468endmenu 1469 1470config SPL_LDSCRIPT 1471 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1472 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1473 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1474 1475 1476