1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_845369 101 bool 102 103config ARM_ERRATA_852421 104 bool 105 106config ARM_ERRATA_852423 107 bool 108 109config CPU_ARM720T 110 bool 111 select SYS_CACHE_SHIFT_5 112 113config CPU_ARM920T 114 bool 115 select SYS_CACHE_SHIFT_5 116 117config CPU_ARM926EJS 118 bool 119 select SYS_CACHE_SHIFT_5 120 121config CPU_ARM946ES 122 bool 123 select SYS_CACHE_SHIFT_5 124 125config CPU_ARM1136 126 bool 127 select SYS_CACHE_SHIFT_5 128 129config CPU_ARM1176 130 bool 131 select HAS_VBAR 132 select SYS_CACHE_SHIFT_5 133 134config CPU_V7 135 bool 136 select HAS_VBAR 137 select HAS_THUMB2 138 select SYS_CACHE_SHIFT_6 139 140config CPU_V7M 141 bool 142 select HAS_THUMB2 143 select THUMB2_KERNEL 144 select SYS_CACHE_SHIFT_5 145 146config CPU_PXA 147 bool 148 select SYS_CACHE_SHIFT_5 149 150config CPU_SA1100 151 bool 152 select SYS_CACHE_SHIFT_5 153 154config SYS_CPU 155 default "arm720t" if CPU_ARM720T 156 default "arm920t" if CPU_ARM920T 157 default "arm926ejs" if CPU_ARM926EJS 158 default "arm946es" if CPU_ARM946ES 159 default "arm1136" if CPU_ARM1136 160 default "arm1176" if CPU_ARM1176 161 default "armv7" if CPU_V7 162 default "armv7m" if CPU_V7M 163 default "pxa" if CPU_PXA 164 default "sa1100" if CPU_SA1100 165 default "armv8" if ARM64 166 167config SYS_ARM_ARCH 168 int 169 default 4 if CPU_ARM720T 170 default 4 if CPU_ARM920T 171 default 5 if CPU_ARM926EJS 172 default 5 if CPU_ARM946ES 173 default 6 if CPU_ARM1136 174 default 6 if CPU_ARM1176 175 default 7 if CPU_V7 176 default 7 if CPU_V7M 177 default 5 if CPU_PXA 178 default 4 if CPU_SA1100 179 default 8 if ARM64 180 181config SYS_CACHE_SHIFT_5 182 bool 183 184config SYS_CACHE_SHIFT_6 185 bool 186 187config SYS_CACHE_SHIFT_7 188 bool 189 190config SYS_CACHELINE_SIZE 191 int 192 default 128 if SYS_CACHE_SHIFT_7 193 default 64 if SYS_CACHE_SHIFT_6 194 default 32 if SYS_CACHE_SHIFT_5 195 196config ARM_SMCCC 197 bool "Support for ARM SMC Calling Convention (SMCCC)" 198 depends on CPU_V7 || ARM64 199 select ARM_PSCI_FW 200 help 201 Say Y here if you want to enable ARM SMC Calling Convention. 202 This should be enabled if U-Boot needs to communicate with system 203 firmware (for example, PSCI) according to SMCCC. 204 205config SEMIHOSTING 206 bool "support boot from semihosting" 207 help 208 In emulated environments, semihosting is a way for 209 the hosted environment to call out to the emulator to 210 retrieve files from the host machine. 211 212config SYS_THUMB_BUILD 213 bool "Build U-Boot using the Thumb instruction set" 214 depends on !ARM64 215 help 216 Use this flag to build U-Boot using the Thumb instruction set for 217 ARM architectures. Thumb instruction set provides better code 218 density. For ARM architectures that support Thumb2 this flag will 219 result in Thumb2 code generated by GCC. 220 221config SPL_SYS_THUMB_BUILD 222 bool "Build SPL using the Thumb instruction set" 223 default y if SYS_THUMB_BUILD 224 depends on !ARM64 225 help 226 Use this flag to build SPL using the Thumb instruction set for 227 ARM architectures. Thumb instruction set provides better code 228 density. For ARM architectures that support Thumb2 this flag will 229 result in Thumb2 code generated by GCC. 230 231config SYS_L2CACHE_OFF 232 bool "L2cache off" 233 help 234 If SoC does not support L2CACHE or one do not want to enable 235 L2CACHE, choose this option. 236 237config ENABLE_ARM_SOC_BOOT0_HOOK 238 bool "prepare BOOT0 header" 239 help 240 If the SoC's BOOT0 requires a header area filled with (magic) 241 values, then choose this option, and create a define called 242 ARM_SOC_BOOT0_HOOK which contains the required assembler 243 preprocessor code. 244 245config ARM_CORTEX_CPU_IS_UP 246 bool 247 default n 248 249config USE_ARCH_MEMCPY 250 bool "Use an assembly optimized implementation of memcpy" 251 default y 252 depends on !ARM64 253 help 254 Enable the generation of an optimized version of memcpy. 255 Such implementation may be faster under some conditions 256 but may increase the binary size. 257 258config SPL_USE_ARCH_MEMCPY 259 bool "Use an assembly optimized implementation of memcpy for SPL" 260 default y if USE_ARCH_MEMCPY 261 depends on !ARM64 262 help 263 Enable the generation of an optimized version of memcpy. 264 Such implementation may be faster under some conditions 265 but may increase the binary size. 266 267config USE_ARCH_MEMSET 268 bool "Use an assembly optimized implementation of memset" 269 default y 270 depends on !ARM64 271 help 272 Enable the generation of an optimized version of memset. 273 Such implementation may be faster under some conditions 274 but may increase the binary size. 275 276config SPL_USE_ARCH_MEMSET 277 bool "Use an assembly optimized implementation of memset for SPL" 278 default y if USE_ARCH_MEMSET 279 depends on !ARM64 280 help 281 Enable the generation of an optimized version of memset. 282 Such implementation may be faster under some conditions 283 but may increase the binary size. 284 285config ARM64_SUPPORT_AARCH32 286 bool "ARM64 system support AArch32 execution state" 287 default y if ARM64 && !TARGET_THUNDERX_88XX 288 help 289 This ARM64 system supports AArch32 execution state. 290 291choice 292 prompt "Target select" 293 default TARGET_HIKEY 294 295config ARCH_AT91 296 bool "Atmel AT91" 297 select SPL_BOARD_INIT if SPL 298 299config TARGET_EDB93XX 300 bool "Support edb93xx" 301 select CPU_ARM920T 302 303config TARGET_ASPENITE 304 bool "Support aspenite" 305 select CPU_ARM926EJS 306 307config TARGET_GPLUGD 308 bool "Support gplugd" 309 select CPU_ARM926EJS 310 311config ARCH_DAVINCI 312 bool "TI DaVinci" 313 select CPU_ARM926EJS 314 imply CMD_SAVES 315 help 316 Support for TI's DaVinci platform. 317 318config KIRKWOOD 319 bool "Marvell Kirkwood" 320 select CPU_ARM926EJS 321 select BOARD_EARLY_INIT_F 322 select ARCH_MISC_INIT 323 324config ARCH_MVEBU 325 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 326 select OF_CONTROL 327 select OF_SEPARATE 328 select DM 329 select DM_ETH 330 select DM_SERIAL 331 select DM_SPI 332 select DM_SPI_FLASH 333 334config TARGET_DEVKIT3250 335 bool "Support devkit3250" 336 select CPU_ARM926EJS 337 select SUPPORT_SPL 338 339config TARGET_WORK_92105 340 bool "Support work_92105" 341 select CPU_ARM926EJS 342 select SUPPORT_SPL 343 344config TARGET_MX25PDK 345 bool "Support mx25pdk" 346 select BOARD_LATE_INIT 347 select CPU_ARM926EJS 348 select BOARD_EARLY_INIT_F 349 350config TARGET_ZMX25 351 bool "Support zmx25" 352 select BOARD_LATE_INIT 353 select CPU_ARM926EJS 354 355config TARGET_APF27 356 bool "Support apf27" 357 select CPU_ARM926EJS 358 select SUPPORT_SPL 359 360config TARGET_APX4DEVKIT 361 bool "Support apx4devkit" 362 select CPU_ARM926EJS 363 select SUPPORT_SPL 364 365config TARGET_XFI3 366 bool "Support xfi3" 367 select CPU_ARM926EJS 368 select SUPPORT_SPL 369 370config TARGET_M28EVK 371 bool "Support m28evk" 372 select CPU_ARM926EJS 373 select SUPPORT_SPL 374 375config TARGET_MX23EVK 376 bool "Support mx23evk" 377 select CPU_ARM926EJS 378 select SUPPORT_SPL 379 select BOARD_EARLY_INIT_F 380 381config TARGET_MX28EVK 382 bool "Support mx28evk" 383 select CPU_ARM926EJS 384 select SUPPORT_SPL 385 select BOARD_EARLY_INIT_F 386 387config TARGET_MX23_OLINUXINO 388 bool "Support mx23_olinuxino" 389 select CPU_ARM926EJS 390 select SUPPORT_SPL 391 select BOARD_EARLY_INIT_F 392 393config TARGET_BG0900 394 bool "Support bg0900" 395 select CPU_ARM926EJS 396 select SUPPORT_SPL 397 398config TARGET_SANSA_FUZE_PLUS 399 bool "Support sansa_fuze_plus" 400 select CPU_ARM926EJS 401 select SUPPORT_SPL 402 403config TARGET_SC_SPS_1 404 bool "Support sc_sps_1" 405 select CPU_ARM926EJS 406 select SUPPORT_SPL 407 408config ORION5X 409 bool "Marvell Orion" 410 select CPU_ARM926EJS 411 412config TARGET_SPEAR300 413 bool "Support spear300" 414 select CPU_ARM926EJS 415 select BOARD_EARLY_INIT_F 416 imply CMD_SAVES 417 418config TARGET_SPEAR310 419 bool "Support spear310" 420 select CPU_ARM926EJS 421 select BOARD_EARLY_INIT_F 422 imply CMD_SAVES 423 424config TARGET_SPEAR320 425 bool "Support spear320" 426 select CPU_ARM926EJS 427 select BOARD_EARLY_INIT_F 428 imply CMD_SAVES 429 430config TARGET_SPEAR600 431 bool "Support spear600" 432 select CPU_ARM926EJS 433 select BOARD_EARLY_INIT_F 434 imply CMD_SAVES 435 436config TARGET_STV0991 437 bool "Support stv0991" 438 select CPU_V7 439 select DM 440 select DM_SERIAL 441 select DM_SPI 442 select DM_SPI_FLASH 443 select SPI_FLASH 444 445config TARGET_X600 446 bool "Support x600" 447 select BOARD_LATE_INIT 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_IMX31_PHYCORE 452 bool "Support imx31_phycore_eet" 453 select CPU_ARM1136 454 select BOARD_EARLY_INIT_F 455 456config TARGET_IMX31_PHYCORE_EET 457 bool "Support imx31_phycore_eet" 458 select BOARD_LATE_INIT 459 select CPU_ARM1136 460 select BOARD_EARLY_INIT_F 461 462config TARGET_MX31ADS 463 bool "Support mx31ads" 464 select CPU_ARM1136 465 select BOARD_EARLY_INIT_F 466 467config TARGET_MX31PDK 468 bool "Support mx31pdk" 469 select BOARD_LATE_INIT 470 select CPU_ARM1136 471 select SUPPORT_SPL 472 select BOARD_EARLY_INIT_F 473 474config TARGET_WOODBURN 475 bool "Support woodburn" 476 select CPU_ARM1136 477 478config TARGET_WOODBURN_SD 479 bool "Support woodburn_sd" 480 select CPU_ARM1136 481 select SUPPORT_SPL 482 483config TARGET_FLEA3 484 bool "Support flea3" 485 select CPU_ARM1136 486 487config TARGET_MX35PDK 488 bool "Support mx35pdk" 489 select BOARD_LATE_INIT 490 select CPU_ARM1136 491 492config ARCH_BCM283X 493 bool "Broadcom BCM283X family" 494 select DM 495 select DM_SERIAL 496 select DM_GPIO 497 select OF_CONTROL 498 imply FAT_WRITE 499 500config TARGET_VEXPRESS_CA15_TC2 501 bool "Support vexpress_ca15_tc2" 502 select CPU_V7 503 select CPU_V7_HAS_NONSEC 504 select CPU_V7_HAS_VIRT 505 506config TARGET_VEXPRESS_CA5X2 507 bool "Support vexpress_ca5x2" 508 select CPU_V7 509 510config TARGET_VEXPRESS_CA9X4 511 bool "Support vexpress_ca9x4" 512 select CPU_V7 513 514config TARGET_BCM23550_W1D 515 bool "Support bcm23550_w1d" 516 select CPU_V7 517 imply CRC32_VERIFY 518 imply FAT_WRITE 519 520config TARGET_BCM28155_AP 521 bool "Support bcm28155_ap" 522 select CPU_V7 523 imply CRC32_VERIFY 524 imply FAT_WRITE 525 526config TARGET_BCMCYGNUS 527 bool "Support bcmcygnus" 528 select CPU_V7 529 imply CRC32_VERIFY 530 imply CMD_HASH 531 imply FAT_WRITE 532 imply HASH_VERIFY 533 imply NETDEVICES 534 imply BCM_SF2_ETH 535 imply BCM_SF2_ETH_GMAC 536 537config TARGET_BCMNSP 538 bool "Support bcmnsp" 539 select CPU_V7 540 541config TARGET_BCMNS2 542 bool "Support Broadcom Northstar2" 543 select ARM64 544 help 545 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 546 ARMv8 Cortex-A57 processors targeting a broad range of networking 547 applications 548 549config ARCH_EXYNOS 550 bool "Samsung EXYNOS" 551 select DM 552 select DM_I2C 553 select DM_SPI_FLASH 554 select DM_SERIAL 555 select DM_SPI 556 select DM_GPIO 557 select DM_KEYBOARD 558 imply FAT_WRITE 559 560config ARCH_S5PC1XX 561 bool "Samsung S5PC1XX" 562 select CPU_V7 563 select DM 564 select DM_SERIAL 565 select DM_GPIO 566 select DM_I2C 567 568config ARCH_HIGHBANK 569 bool "Calxeda Highbank" 570 select CPU_V7 571 572config ARCH_INTEGRATOR 573 bool "ARM Ltd. Integrator family" 574 select DM 575 select DM_SERIAL 576 577config ARCH_KEYSTONE 578 bool "TI Keystone" 579 select CPU_V7 580 select SUPPORT_SPL 581 select SYS_THUMB_BUILD 582 select CMD_POWEROFF 583 imply CMD_MTDPARTS 584 imply FIT 585 imply CMD_SAVES 586 587config ARCH_OMAP2PLUS 588 bool "TI OMAP2+" 589 select CPU_V7 590 select SPL_BOARD_INIT if SPL 591 select SPL_STACK_R if SPL 592 select SUPPORT_SPL 593 imply FIT 594 595config ARCH_MESON 596 bool "Amlogic Meson" 597 help 598 Support for the Meson SoC family developed by Amlogic Inc., 599 targeted at media players and tablet computers. We currently 600 support the S905 (GXBaby) 64-bit SoC. 601 602config ARCH_MX7ULP 603 bool "NXP MX7ULP" 604 select CPU_V7 605 select ROM_UNIFIED_SECTIONS 606 607config ARCH_MX7 608 bool "Freescale MX7" 609 select CPU_V7 610 select SYS_FSL_HAS_SEC if SECURE_BOOT 611 select SYS_FSL_SEC_COMPAT_4 612 select SYS_FSL_SEC_LE 613 select BOARD_EARLY_INIT_F 614 select ARCH_MISC_INIT 615 616config ARCH_MX6 617 bool "Freescale MX6" 618 select CPU_V7 619 select SYS_FSL_HAS_SEC if SECURE_BOOT 620 select SYS_FSL_SEC_COMPAT_4 621 select SYS_FSL_SEC_LE 622 select SYS_THUMB_BUILD if SPL 623 624if ARCH_MX6 625config SPL_LDSCRIPT 626 default "arch/arm/mach-omap2/u-boot-spl.lds" 627endif 628 629config ARCH_MX5 630 bool "Freescale MX5" 631 select CPU_V7 632 select BOARD_EARLY_INIT_F 633 634config ARCH_RMOBILE 635 bool "Renesas ARM SoCs" 636 select DM 637 select DM_SERIAL 638 select BOARD_EARLY_INIT_F 639 imply FAT_WRITE 640 imply SYS_THUMB_BUILD 641 642config TARGET_S32V234EVB 643 bool "Support s32v234evb" 644 select ARM64 645 select SYS_FSL_ERRATUM_ESDHC111 646 647config ARCH_SNAPDRAGON 648 bool "Qualcomm Snapdragon SoCs" 649 select ARM64 650 select DM 651 select DM_GPIO 652 select DM_SERIAL 653 select SPMI 654 select OF_CONTROL 655 select OF_SEPARATE 656 657config ARCH_SOCFPGA 658 bool "Altera SOCFPGA family" 659 select CPU_V7 660 select SUPPORT_SPL 661 select OF_CONTROL 662 select SPL_OF_CONTROL 663 select DM 664 select DM_SPI_FLASH 665 select DM_SPI 666 select ENABLE_ARM_SOC_BOOT0_HOOK 667 select ARCH_EARLY_INIT_R 668 select ARCH_MISC_INIT 669 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 670 select SYS_THUMB_BUILD 671 imply CMD_MTDPARTS 672 imply CRC32_VERIFY 673 imply FAT_WRITE 674 675config ARCH_SUNXI 676 bool "Support sunxi (Allwinner) SoCs" 677 select CMD_GPIO 678 select CMD_MMC if MMC 679 select CMD_USB if DISTRO_DEFAULTS 680 select DM 681 select DM_ETH 682 select DM_GPIO 683 select DM_KEYBOARD 684 select DM_SERIAL 685 select DM_USB if DISTRO_DEFAULTS 686 select OF_BOARD_SETUP 687 select OF_CONTROL 688 select OF_SEPARATE 689 select SPL_STACK_R if SPL 690 select SPL_SYS_MALLOC_SIMPLE if SPL 691 select SYS_NS16550 692 select SPL_SYS_THUMB_BUILD if !ARM64 693 select USB if DISTRO_DEFAULTS 694 select USB_STORAGE if DISTRO_DEFAULTS 695 select USB_KEYBOARD if DISTRO_DEFAULTS 696 select USE_TINY_PRINTF 697 imply CMD_FASTBOOT 698 imply FASTBOOT 699 imply FAT_WRITE 700 imply PRE_CONSOLE_BUFFER 701 imply SPL_GPIO_SUPPORT 702 imply SPL_LIBCOMMON_SUPPORT 703 imply SPL_LIBDISK_SUPPORT 704 imply SPL_LIBGENERIC_SUPPORT 705 imply SPL_MMC_SUPPORT if MMC 706 imply SPL_POWER_SUPPORT 707 imply SPL_SERIAL_SUPPORT 708 imply USB_FUNCTION_FASTBOOT 709 710config TARGET_TS4600 711 bool "Support TS4600" 712 select CPU_ARM926EJS 713 select SUPPORT_SPL 714 715config ARCH_VF610 716 bool "Freescale Vybrid" 717 select CPU_V7 718 select SYS_FSL_ERRATUM_ESDHC111 719 imply CMD_MTDPARTS 720 imply NAND 721 722config ARCH_ZYNQ 723 bool "Xilinx Zynq Platform" 724 select BOARD_LATE_INIT 725 select CPU_V7 726 select SUPPORT_SPL 727 select OF_CONTROL 728 select SPL_BOARD_INIT if SPL 729 select SPL_OF_CONTROL if SPL 730 select DM 731 select DM_ETH 732 select DM_GPIO 733 select SPL_DM if SPL 734 select DM_MMC 735 select DM_SPI 736 select DM_SERIAL 737 select DM_SPI_FLASH 738 select SPL_SEPARATE_BSS if SPL 739 select DM_USB if USB 740 select BLK 741 select CLK 742 select SPL_CLK 743 select CLK_ZYNQ 744 imply CMD_CLK 745 imply FAT_WRITE 746 imply CMD_SPL 747 748config ARCH_ZYNQMP 749 bool "Support Xilinx ZynqMP Platform" 750 select ARM64 751 select BOARD_LATE_INIT 752 select DM 753 select OF_CONTROL 754 select DM_SERIAL 755 select SUPPORT_SPL 756 select CLK 757 select SPL_BOARD_INIT if SPL 758 select SPL_CLK 759 select DM_USB if USB 760 imply FAT_WRITE 761 762config TEGRA 763 bool "NVIDIA Tegra" 764 imply FAT_WRITE 765 766config TARGET_VEXPRESS64_AEMV8A 767 bool "Support vexpress_aemv8a" 768 select ARM64 769 770config TARGET_VEXPRESS64_BASE_FVP 771 bool "Support Versatile Express ARMv8a FVP BASE model" 772 select ARM64 773 select SEMIHOSTING 774 775config TARGET_VEXPRESS64_BASE_FVP_DRAM 776 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 777 select ARM64 778 help 779 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 780 the default config to allow the user to load the images directly into 781 DRAM using model parameters rather than by using semi-hosting to load 782 the files from the host filesystem. 783 784config TARGET_VEXPRESS64_JUNO 785 bool "Support Versatile Express Juno Development Platform" 786 select ARM64 787 788config TARGET_LS2080A_EMU 789 bool "Support ls2080a_emu" 790 select ARCH_LS2080A 791 select ARM64 792 select ARMV8_MULTIENTRY 793 select ARCH_MISC_INIT 794 help 795 Support for Freescale LS2080A_EMU platform 796 The LS2080A Development System (EMULATOR) is a pre silicon 797 development platform that supports the QorIQ LS2080A 798 Layerscape Architecture processor. 799 800config TARGET_LS2080A_SIMU 801 bool "Support ls2080a_simu" 802 select ARCH_LS2080A 803 select ARM64 804 select ARMV8_MULTIENTRY 805 select ARCH_MISC_INIT 806 help 807 Support for Freescale LS2080A_SIMU platform 808 The LS2080A Development System (QDS) is a pre silicon 809 development platform that supports the QorIQ LS2080A 810 Layerscape Architecture processor. 811 812config TARGET_LS1088AQDS 813 bool "Support ls1088aqds" 814 select ARCH_LS1088A 815 select ARM64 816 select ARMV8_MULTIENTRY 817 select ARCH_MISC_INIT 818 select BOARD_LATE_INIT 819 help 820 Support for NXP LS1088AQDS platform 821 The LS1088A Development System (QDS) is a high-performance 822 development platform that supports the QorIQ LS1088A 823 Layerscape Architecture processor. 824 825config TARGET_LS2080AQDS 826 bool "Support ls2080aqds" 827 select ARCH_LS2080A 828 select ARM64 829 select ARMV8_MULTIENTRY 830 select BOARD_LATE_INIT 831 select SUPPORT_SPL 832 select ARCH_MISC_INIT 833 imply SCSI 834 help 835 Support for Freescale LS2080AQDS platform 836 The LS2080A Development System (QDS) is a high-performance 837 development platform that supports the QorIQ LS2080A 838 Layerscape Architecture processor. 839 840config TARGET_LS2080ARDB 841 bool "Support ls2080ardb" 842 select ARCH_LS2080A 843 select ARM64 844 select ARMV8_MULTIENTRY 845 select BOARD_LATE_INIT 846 select SUPPORT_SPL 847 select ARCH_MISC_INIT 848 imply SCSI 849 help 850 Support for Freescale LS2080ARDB platform. 851 The LS2080A Reference design board (RDB) is a high-performance 852 development platform that supports the QorIQ LS2080A 853 Layerscape Architecture processor. 854 855config TARGET_LS2081ARDB 856 bool "Support ls2081ardb" 857 select ARCH_LS2080A 858 select ARM64 859 select ARMV8_MULTIENTRY 860 select BOARD_LATE_INIT 861 select SUPPORT_SPL 862 select ARCH_MISC_INIT 863 help 864 Support for Freescale LS2081ARDB platform. 865 The LS2081A Reference design board (RDB) is a high-performance 866 development platform that supports the QorIQ LS2081A/LS2041A 867 Layerscape Architecture processor. 868 869config TARGET_HIKEY 870 bool "Support HiKey 96boards Consumer Edition Platform" 871 select ARM64 872 select DM 873 select DM_GPIO 874 select DM_SERIAL 875 select OF_CONTROL 876 help 877 Support for HiKey 96boards platform. It features a HI6220 878 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 879 880config TARGET_POPLAR 881 bool "Support Poplar 96boards Enterprise Edition Platform" 882 select ARM64 883 select DM 884 select OF_CONTROL 885 select DM_SERIAL 886 select DM_USB 887 help 888 Support for Poplar 96boards EE platform. It features a HI3798cv200 889 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 890 making it capable of running any commercial set-top solution based on 891 Linux or Android. 892 893config TARGET_LS1012AQDS 894 bool "Support ls1012aqds" 895 select ARCH_LS1012A 896 select ARM64 897 select BOARD_LATE_INIT 898 help 899 Support for Freescale LS1012AQDS platform. 900 The LS1012A Development System (QDS) is a high-performance 901 development platform that supports the QorIQ LS1012A 902 Layerscape Architecture processor. 903 904config TARGET_LS1012ARDB 905 bool "Support ls1012ardb" 906 select ARCH_LS1012A 907 select ARM64 908 select BOARD_LATE_INIT 909 imply SCSI 910 help 911 Support for Freescale LS1012ARDB platform. 912 The LS1012A Reference design board (RDB) is a high-performance 913 development platform that supports the QorIQ LS1012A 914 Layerscape Architecture processor. 915 916config TARGET_LS1012AFRDM 917 bool "Support ls1012afrdm" 918 select ARCH_LS1012A 919 select ARM64 920 help 921 Support for Freescale LS1012AFRDM platform. 922 The LS1012A Freedom board (FRDM) is a high-performance 923 development platform that supports the QorIQ LS1012A 924 Layerscape Architecture processor. 925 926config TARGET_LS1088ARDB 927 bool "Support ls1088ardb" 928 select ARCH_LS1088A 929 select ARM64 930 select ARMV8_MULTIENTRY 931 select ARCH_MISC_INIT 932 select BOARD_LATE_INIT 933 help 934 Support for NXP LS1088ARDB platform. 935 The LS1088A Reference design board (RDB) is a high-performance 936 development platform that supports the QorIQ LS1088A 937 Layerscape Architecture processor. 938 939config TARGET_LS1021AQDS 940 bool "Support ls1021aqds" 941 select BOARD_LATE_INIT 942 select CPU_V7 943 select CPU_V7_HAS_NONSEC 944 select CPU_V7_HAS_VIRT 945 select SUPPORT_SPL 946 select ARCH_LS1021A 947 select ARCH_SUPPORT_PSCI 948 select LS1_DEEP_SLEEP 949 select SYS_FSL_DDR 950 select BOARD_EARLY_INIT_F 951 imply SCSI 952 953config TARGET_LS1021ATWR 954 bool "Support ls1021atwr" 955 select BOARD_LATE_INIT 956 select CPU_V7 957 select CPU_V7_HAS_NONSEC 958 select CPU_V7_HAS_VIRT 959 select SUPPORT_SPL 960 select ARCH_LS1021A 961 select ARCH_SUPPORT_PSCI 962 select LS1_DEEP_SLEEP 963 select BOARD_EARLY_INIT_F 964 imply SCSI 965 966config TARGET_LS1021AIOT 967 bool "Support ls1021aiot" 968 select BOARD_LATE_INIT 969 select CPU_V7 970 select CPU_V7_HAS_NONSEC 971 select CPU_V7_HAS_VIRT 972 select SUPPORT_SPL 973 select ARCH_LS1021A 974 select ARCH_SUPPORT_PSCI 975 imply SCSI 976 help 977 Support for Freescale LS1021AIOT platform. 978 The LS1021A Freescale board (IOT) is a high-performance 979 development platform that supports the QorIQ LS1021A 980 Layerscape Architecture processor. 981 982config TARGET_LS1043AQDS 983 bool "Support ls1043aqds" 984 select ARCH_LS1043A 985 select ARM64 986 select ARMV8_MULTIENTRY 987 select BOARD_LATE_INIT 988 select SUPPORT_SPL 989 select BOARD_EARLY_INIT_F 990 imply SCSI 991 help 992 Support for Freescale LS1043AQDS platform. 993 994config TARGET_LS1043ARDB 995 bool "Support ls1043ardb" 996 select ARCH_LS1043A 997 select ARM64 998 select ARMV8_MULTIENTRY 999 select BOARD_LATE_INIT 1000 select SUPPORT_SPL 1001 select BOARD_EARLY_INIT_F 1002 imply SCSI 1003 help 1004 Support for Freescale LS1043ARDB platform. 1005 1006config TARGET_LS1046AQDS 1007 bool "Support ls1046aqds" 1008 select ARCH_LS1046A 1009 select ARM64 1010 select ARMV8_MULTIENTRY 1011 select BOARD_LATE_INIT 1012 select SUPPORT_SPL 1013 select DM_SPI_FLASH if DM_SPI 1014 select BOARD_EARLY_INIT_F 1015 imply SCSI 1016 help 1017 Support for Freescale LS1046AQDS platform. 1018 The LS1046A Development System (QDS) is a high-performance 1019 development platform that supports the QorIQ LS1046A 1020 Layerscape Architecture processor. 1021 1022config TARGET_LS1046ARDB 1023 bool "Support ls1046ardb" 1024 select ARCH_LS1046A 1025 select ARM64 1026 select ARMV8_MULTIENTRY 1027 select BOARD_LATE_INIT 1028 select SUPPORT_SPL 1029 select DM_SPI_FLASH if DM_SPI 1030 select POWER_MC34VR500 1031 select BOARD_EARLY_INIT_F 1032 imply SCSI 1033 help 1034 Support for Freescale LS1046ARDB platform. 1035 The LS1046A Reference Design Board (RDB) is a high-performance 1036 development platform that supports the QorIQ LS1046A 1037 Layerscape Architecture processor. 1038 1039config TARGET_H2200 1040 bool "Support h2200" 1041 select CPU_PXA 1042 1043config TARGET_ZIPITZ2 1044 bool "Support zipitz2" 1045 select CPU_PXA 1046 1047config TARGET_COLIBRI_PXA270 1048 bool "Support colibri_pxa270" 1049 select CPU_PXA 1050 1051config ARCH_UNIPHIER 1052 bool "Socionext UniPhier SoCs" 1053 select BOARD_LATE_INIT 1054 select DM 1055 select DM_GPIO 1056 select DM_I2C 1057 select DM_MMC 1058 select DM_RESET 1059 select DM_SERIAL 1060 select DM_USB 1061 select OF_CONTROL 1062 select OF_LIBFDT 1063 select PINCTRL 1064 select SPL_BOARD_INIT if SPL 1065 select SPL_DM if SPL 1066 select SPL_LIBCOMMON_SUPPORT if SPL 1067 select SPL_LIBGENERIC_SUPPORT if SPL 1068 select SPL_OF_CONTROL if SPL 1069 select SPL_PINCTRL if SPL 1070 select SUPPORT_SPL 1071 imply FAT_WRITE 1072 help 1073 Support for UniPhier SoC family developed by Socionext Inc. 1074 (formerly, System LSI Business Division of Panasonic Corporation) 1075 1076config STM32 1077 bool "Support STM32" 1078 select CPU_V7M 1079 select DM 1080 select DM_SERIAL 1081 select SYS_THUMB_BUILD 1082 1083config ARCH_STI 1084 bool "Support STMicrolectronics SoCs" 1085 select CPU_V7 1086 select DM 1087 select DM_SERIAL 1088 select BLK 1089 select DM_MMC 1090 select DM_RESET 1091 help 1092 Support for STMicroelectronics STiH407/10 SoC family. 1093 This SoC is used on Linaro 96Board STiH410-B2260 1094 1095config ARCH_ROCKCHIP 1096 bool "Support Rockchip SoCs" 1097 select OF_CONTROL 1098 select BLK 1099 select DM 1100 select SPL_DM if SPL 1101 select SYS_MALLOC_F 1102 select SYS_THUMB_BUILD if !ARM64 1103 select SPL_SYS_MALLOC_SIMPLE if SPL 1104 select DM_GPIO 1105 select DM_I2C 1106 select DM_MMC 1107 select DM_SERIAL 1108 select DM_SPI 1109 select DM_SPI_FLASH 1110 select DM_USB if USB 1111 select DM_PWM 1112 select DM_REGULATOR 1113 imply CMD_FASTBOOT 1114 imply FASTBOOT 1115 imply FAT_WRITE 1116 imply USB_FUNCTION_FASTBOOT 1117 imply SPL_SYSRESET 1118 imply TPL_SYSRESET 1119 imply ADC 1120 imply SARADC_ROCKCHIP 1121 1122config TARGET_THUNDERX_88XX 1123 bool "Support ThunderX 88xx" 1124 select ARM64 1125 select OF_CONTROL 1126 select SYS_CACHE_SHIFT_7 1127 1128config ARCH_ASPEED 1129 bool "Support Aspeed SoCs" 1130 select OF_CONTROL 1131 select DM 1132 1133endchoice 1134 1135source "arch/arm/mach-aspeed/Kconfig" 1136 1137source "arch/arm/mach-at91/Kconfig" 1138 1139source "arch/arm/mach-bcm283x/Kconfig" 1140 1141source "arch/arm/mach-davinci/Kconfig" 1142 1143source "arch/arm/mach-exynos/Kconfig" 1144 1145source "arch/arm/mach-highbank/Kconfig" 1146 1147source "arch/arm/mach-integrator/Kconfig" 1148 1149source "arch/arm/mach-keystone/Kconfig" 1150 1151source "arch/arm/mach-kirkwood/Kconfig" 1152 1153source "arch/arm/mach-mvebu/Kconfig" 1154 1155source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1156 1157source "arch/arm/mach-imx/mx7ulp/Kconfig" 1158 1159source "arch/arm/mach-imx/mx7/Kconfig" 1160 1161source "arch/arm/mach-imx/mx6/Kconfig" 1162 1163source "arch/arm/mach-imx/mx5/Kconfig" 1164 1165source "arch/arm/mach-omap2/Kconfig" 1166 1167source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1168 1169source "arch/arm/mach-orion5x/Kconfig" 1170 1171source "arch/arm/mach-rmobile/Kconfig" 1172 1173source "arch/arm/mach-meson/Kconfig" 1174 1175source "arch/arm/mach-rockchip/Kconfig" 1176 1177source "arch/arm/mach-s5pc1xx/Kconfig" 1178 1179source "arch/arm/mach-snapdragon/Kconfig" 1180 1181source "arch/arm/mach-socfpga/Kconfig" 1182 1183source "arch/arm/mach-sti/Kconfig" 1184 1185source "arch/arm/mach-stm32/Kconfig" 1186 1187source "arch/arm/mach-sunxi/Kconfig" 1188 1189source "arch/arm/mach-tegra/Kconfig" 1190 1191source "arch/arm/mach-uniphier/Kconfig" 1192 1193source "arch/arm/cpu/armv7/vf610/Kconfig" 1194 1195source "arch/arm/mach-zynq/Kconfig" 1196 1197source "arch/arm/cpu/armv7/Kconfig" 1198 1199source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1200 1201source "arch/arm/cpu/armv8/Kconfig" 1202 1203source "arch/arm/mach-imx/Kconfig" 1204 1205source "board/aries/m28evk/Kconfig" 1206source "board/bosch/shc/Kconfig" 1207source "board/CarMediaLab/flea3/Kconfig" 1208source "board/Marvell/aspenite/Kconfig" 1209source "board/Marvell/gplugd/Kconfig" 1210source "board/armadeus/apf27/Kconfig" 1211source "board/armltd/vexpress/Kconfig" 1212source "board/armltd/vexpress64/Kconfig" 1213source "board/bluegiga/apx4devkit/Kconfig" 1214source "board/broadcom/bcm23550_w1d/Kconfig" 1215source "board/broadcom/bcm28155_ap/Kconfig" 1216source "board/broadcom/bcmcygnus/Kconfig" 1217source "board/broadcom/bcmnsp/Kconfig" 1218source "board/broadcom/bcmns2/Kconfig" 1219source "board/cavium/thunderx/Kconfig" 1220source "board/cirrus/edb93xx/Kconfig" 1221source "board/creative/xfi3/Kconfig" 1222source "board/freescale/ls2080a/Kconfig" 1223source "board/freescale/ls2080aqds/Kconfig" 1224source "board/freescale/ls2080ardb/Kconfig" 1225source "board/freescale/ls1088a/Kconfig" 1226source "board/freescale/ls1021aqds/Kconfig" 1227source "board/freescale/ls1043aqds/Kconfig" 1228source "board/freescale/ls1021atwr/Kconfig" 1229source "board/freescale/ls1021aiot/Kconfig" 1230source "board/freescale/ls1046aqds/Kconfig" 1231source "board/freescale/ls1043ardb/Kconfig" 1232source "board/freescale/ls1046ardb/Kconfig" 1233source "board/freescale/ls1012aqds/Kconfig" 1234source "board/freescale/ls1012ardb/Kconfig" 1235source "board/freescale/ls1012afrdm/Kconfig" 1236source "board/freescale/mx23evk/Kconfig" 1237source "board/freescale/mx25pdk/Kconfig" 1238source "board/freescale/mx28evk/Kconfig" 1239source "board/freescale/mx31ads/Kconfig" 1240source "board/freescale/mx31pdk/Kconfig" 1241source "board/freescale/mx35pdk/Kconfig" 1242source "board/freescale/s32v234evb/Kconfig" 1243source "board/gdsys/a38x/Kconfig" 1244source "board/grinn/chiliboard/Kconfig" 1245source "board/gumstix/pepper/Kconfig" 1246source "board/h2200/Kconfig" 1247source "board/hisilicon/hikey/Kconfig" 1248source "board/hisilicon/poplar/Kconfig" 1249source "board/imx31_phycore/Kconfig" 1250source "board/isee/igep003x/Kconfig" 1251source "board/olimex/mx23_olinuxino/Kconfig" 1252source "board/phytec/pcm051/Kconfig" 1253source "board/ppcag/bg0900/Kconfig" 1254source "board/sandisk/sansa_fuze_plus/Kconfig" 1255source "board/schulercontrol/sc_sps_1/Kconfig" 1256source "board/silica/pengwyn/Kconfig" 1257source "board/spear/spear300/Kconfig" 1258source "board/spear/spear310/Kconfig" 1259source "board/spear/spear320/Kconfig" 1260source "board/spear/spear600/Kconfig" 1261source "board/spear/x600/Kconfig" 1262source "board/st/stv0991/Kconfig" 1263source "board/syteco/zmx25/Kconfig" 1264source "board/tcl/sl50/Kconfig" 1265source "board/birdland/bav335x/Kconfig" 1266source "board/timll/devkit3250/Kconfig" 1267source "board/toradex/colibri_pxa270/Kconfig" 1268source "board/technologic/ts4600/Kconfig" 1269source "board/vscom/baltos/Kconfig" 1270source "board/woodburn/Kconfig" 1271source "board/work-microwave/work_92105/Kconfig" 1272source "board/zipitz2/Kconfig" 1273 1274source "arch/arm/Kconfig.debug" 1275 1276endmenu 1277 1278config SPL_LDSCRIPT 1279 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 1280 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1281 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1282 1283 1284