1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_DEVKIT3250 447 bool "Support devkit3250" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_WORK_92105 452 bool "Support work_92105" 453 select CPU_ARM926EJS 454 select SUPPORT_SPL 455 456config TARGET_APF27 457 bool "Support apf27" 458 select CPU_ARM926EJS 459 select SUPPORT_SPL 460 461config ORION5X 462 bool "Marvell Orion" 463 select CPU_ARM926EJS 464 465config TARGET_SPEAR300 466 bool "Support spear300" 467 select BOARD_EARLY_INIT_F 468 select CPU_ARM926EJS 469 select PL011_SERIAL 470 imply CMD_SAVES 471 472config TARGET_SPEAR310 473 bool "Support spear310" 474 select BOARD_EARLY_INIT_F 475 select CPU_ARM926EJS 476 select PL011_SERIAL 477 imply CMD_SAVES 478 479config TARGET_SPEAR320 480 bool "Support spear320" 481 select BOARD_EARLY_INIT_F 482 select CPU_ARM926EJS 483 select PL011_SERIAL 484 imply CMD_SAVES 485 486config TARGET_SPEAR600 487 bool "Support spear600" 488 select BOARD_EARLY_INIT_F 489 select CPU_ARM926EJS 490 select PL011_SERIAL 491 imply CMD_SAVES 492 493config TARGET_STV0991 494 bool "Support stv0991" 495 select CPU_V7A 496 select DM 497 select DM_SERIAL 498 select DM_SPI 499 select DM_SPI_FLASH 500 select PL01X_SERIAL 501 select SPI 502 select SPI_FLASH 503 imply CMD_DM 504 505config TARGET_X600 506 bool "Support x600" 507 select BOARD_LATE_INIT 508 select CPU_ARM926EJS 509 select PL011_SERIAL 510 select SUPPORT_SPL 511 512config TARGET_WOODBURN 513 bool "Support woodburn" 514 select CPU_ARM1136 515 516config TARGET_WOODBURN_SD 517 bool "Support woodburn_sd" 518 select CPU_ARM1136 519 select SUPPORT_SPL 520 521config TARGET_FLEA3 522 bool "Support flea3" 523 select CPU_ARM1136 524 525config TARGET_MX35PDK 526 bool "Support mx35pdk" 527 select BOARD_LATE_INIT 528 select CPU_ARM1136 529 530config ARCH_BCM283X 531 bool "Broadcom BCM283X family" 532 select DM 533 select DM_GPIO 534 select DM_SERIAL 535 select OF_CONTROL 536 select PL01X_SERIAL 537 select SERIAL_SEARCH_ALL 538 imply CMD_DM 539 imply FAT_WRITE 540 541config TARGET_VEXPRESS_CA15_TC2 542 bool "Support vexpress_ca15_tc2" 543 select CPU_V7A 544 select CPU_V7_HAS_NONSEC 545 select CPU_V7_HAS_VIRT 546 select PL011_SERIAL 547 548config ARCH_BCMSTB 549 bool "Broadcom BCM7XXX family" 550 select CPU_V7A 551 select DM 552 select OF_CONTROL 553 select OF_PRIOR_STAGE 554 imply CMD_DM 555 help 556 This enables support for Broadcom ARM-based set-top box 557 chipsets, including the 7445 family of chips. 558 559config TARGET_VEXPRESS_CA5X2 560 bool "Support vexpress_ca5x2" 561 select CPU_V7A 562 select PL011_SERIAL 563 564config TARGET_VEXPRESS_CA9X4 565 bool "Support vexpress_ca9x4" 566 select CPU_V7A 567 select PL011_SERIAL 568 569config TARGET_BCM23550_W1D 570 bool "Support bcm23550_w1d" 571 select CPU_V7A 572 imply CRC32_VERIFY 573 imply FAT_WRITE 574 575config TARGET_BCM28155_AP 576 bool "Support bcm28155_ap" 577 select CPU_V7A 578 imply CRC32_VERIFY 579 imply FAT_WRITE 580 581config TARGET_BCMCYGNUS 582 bool "Support bcmcygnus" 583 select CPU_V7A 584 imply BCM_SF2_ETH 585 imply BCM_SF2_ETH_GMAC 586 imply CMD_HASH 587 imply CRC32_VERIFY 588 imply FAT_WRITE 589 imply HASH_VERIFY 590 imply NETDEVICES 591 592config TARGET_BCMNSP 593 bool "Support bcmnsp" 594 select CPU_V7A 595 596config TARGET_BCMNS2 597 bool "Support Broadcom Northstar2" 598 select ARM64 599 help 600 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 601 ARMv8 Cortex-A57 processors targeting a broad range of networking 602 applications 603 604config ARCH_EXYNOS 605 bool "Samsung EXYNOS" 606 select DM 607 select DM_GPIO 608 select DM_I2C 609 select DM_KEYBOARD 610 select DM_SERIAL 611 select DM_SPI 612 select DM_SPI_FLASH 613 select SPI 614 imply CMD_DM 615 imply FAT_WRITE 616 617config ARCH_S5PC1XX 618 bool "Samsung S5PC1XX" 619 select CPU_V7A 620 select DM 621 select DM_GPIO 622 select DM_I2C 623 select DM_SERIAL 624 imply CMD_DM 625 626config ARCH_HIGHBANK 627 bool "Calxeda Highbank" 628 select CPU_V7A 629 select PL011_SERIAL 630 631config ARCH_INTEGRATOR 632 bool "ARM Ltd. Integrator family" 633 select DM 634 select DM_SERIAL 635 select PL01X_SERIAL 636 imply CMD_DM 637 638config ARCH_KEYSTONE 639 bool "TI Keystone" 640 select CMD_POWEROFF 641 select CPU_V7A 642 select SUPPORT_SPL 643 select SYS_ARCH_TIMER 644 select SYS_THUMB_BUILD 645 imply CMD_MTDPARTS 646 imply CMD_SAVES 647 imply FIT 648 649config ARCH_OMAP2PLUS 650 bool "TI OMAP2+" 651 select CPU_V7A 652 select SPL_BOARD_INIT if SPL 653 select SPL_STACK_R if SPL 654 select SUPPORT_SPL 655 imply FIT 656 657config ARCH_MESON 658 bool "Amlogic Meson" 659 imply DISTRO_DEFAULTS 660 help 661 Support for the Meson SoC family developed by Amlogic Inc., 662 targeted at media players and tablet computers. We currently 663 support the S905 (GXBaby) 64-bit SoC. 664 665config ARCH_MX8M 666 bool "NXP i.MX8M platform" 667 select ARM64 668 select DM 669 select SUPPORT_SPL 670 imply CMD_DM 671 672config ARCH_MX23 673 bool "NXP i.MX23 family" 674 select CPU_ARM926EJS 675 select PL011_SERIAL 676 select SUPPORT_SPL 677 678config ARCH_MX25 679 bool "NXP MX25" 680 select CPU_ARM926EJS 681 imply MXC_GPIO 682 683config ARCH_MX28 684 bool "NXP i.MX28 family" 685 select CPU_ARM926EJS 686 select PL011_SERIAL 687 select SUPPORT_SPL 688 689config ARCH_MX31 690 bool "NXP i.MX31 family" 691 select CPU_ARM1136 692 693config ARCH_MX7ULP 694 bool "NXP MX7ULP" 695 select CPU_V7A 696 select ROM_UNIFIED_SECTIONS 697 imply MXC_GPIO 698 699config ARCH_MX7 700 bool "Freescale MX7" 701 select ARCH_MISC_INIT 702 select BOARD_EARLY_INIT_F 703 select CPU_V7A 704 select SYS_FSL_HAS_SEC if SECURE_BOOT 705 select SYS_FSL_SEC_COMPAT_4 706 select SYS_FSL_SEC_LE 707 imply MXC_GPIO 708 709config ARCH_MX6 710 bool "Freescale MX6" 711 select CPU_V7A 712 select SYS_FSL_HAS_SEC if SECURE_BOOT 713 select SYS_FSL_SEC_COMPAT_4 714 select SYS_FSL_SEC_LE 715 select SYS_THUMB_BUILD if SPL 716 imply MXC_GPIO 717 718if ARCH_MX6 719config SPL_LDSCRIPT 720 default "arch/arm/mach-omap2/u-boot-spl.lds" 721endif 722 723config ARCH_MX5 724 bool "Freescale MX5" 725 select BOARD_EARLY_INIT_F 726 select CPU_V7A 727 imply MXC_GPIO 728 729config ARCH_OWL 730 bool "Actions Semi OWL SoCs" 731 select ARM64 732 select DM 733 select DM_SERIAL 734 select OF_CONTROL 735 imply CMD_DM 736 737config ARCH_QEMU 738 bool "QEMU Virtual Platform" 739 select DM 740 select DM_SERIAL 741 select OF_CONTROL 742 select PL01X_SERIAL 743 imply CMD_DM 744 745config ARCH_RMOBILE 746 bool "Renesas ARM SoCs" 747 select BOARD_EARLY_INIT_F 748 select DM 749 select DM_SERIAL 750 imply CMD_DM 751 imply FAT_WRITE 752 imply SYS_THUMB_BUILD 753 754config TARGET_S32V234EVB 755 bool "Support s32v234evb" 756 select ARM64 757 select SYS_FSL_ERRATUM_ESDHC111 758 759config ARCH_SNAPDRAGON 760 bool "Qualcomm Snapdragon SoCs" 761 select ARM64 762 select DM 763 select DM_GPIO 764 select DM_SERIAL 765 select MSM_SMEM 766 select OF_CONTROL 767 select OF_SEPARATE 768 select SMEM 769 select SPMI 770 imply CMD_DM 771 772config ARCH_SOCFPGA 773 bool "Altera SOCFPGA family" 774 select ARCH_EARLY_INIT_R 775 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 776 select ARM64 if TARGET_SOCFPGA_STRATIX10 777 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 778 select DM 779 select DM_SERIAL 780 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 781 select OF_CONTROL 782 select SPL_DM_RESET if DM_RESET 783 select SPL_DM_SERIAL 784 select SPL_LIBCOMMON_SUPPORT 785 select SPL_LIBDISK_SUPPORT 786 select SPL_LIBGENERIC_SUPPORT 787 select SPL_MMC_SUPPORT if DM_MMC 788 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 789 select SPL_OF_CONTROL 790 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 791 select SPL_SERIAL_SUPPORT 792 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 793 select SPL_SPI_SUPPORT if DM_SPI 794 select SPL_WATCHDOG_SUPPORT 795 select SUPPORT_SPL 796 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 797 select SYS_NS16550 798 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 799 imply CMD_DM 800 imply CMD_MTDPARTS 801 imply CRC32_VERIFY 802 imply DM_SPI 803 imply DM_SPI_FLASH 804 imply FAT_WRITE 805 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 806 807config ARCH_SUNXI 808 bool "Support sunxi (Allwinner) SoCs" 809 select BINMAN 810 select CMD_GPIO 811 select CMD_MMC if MMC 812 select CMD_USB if DISTRO_DEFAULTS 813 select DM 814 select DM_ETH 815 select DM_GPIO 816 select DM_KEYBOARD 817 select DM_SERIAL 818 select DM_USB if DISTRO_DEFAULTS 819 select OF_BOARD_SETUP 820 select OF_CONTROL 821 select OF_SEPARATE 822 select SPECIFY_CONSOLE_INDEX 823 select SPL_STACK_R if SPL 824 select SPL_SYS_MALLOC_SIMPLE if SPL 825 select SPL_SYS_THUMB_BUILD if !ARM64 826 select SYS_NS16550 827 select SYS_THUMB_BUILD if !ARM64 828 select USB if DISTRO_DEFAULTS 829 select USB_KEYBOARD if DISTRO_DEFAULTS 830 select USB_STORAGE if DISTRO_DEFAULTS 831 select USE_TINY_PRINTF 832 imply CMD_DM 833 imply CMD_GPT 834 imply CMD_UBI if NAND 835 imply DISTRO_DEFAULTS 836 imply FAT_WRITE 837 imply OF_LIBFDT_OVERLAY 838 imply PRE_CONSOLE_BUFFER 839 imply SPL_GPIO_SUPPORT 840 imply SPL_LIBCOMMON_SUPPORT 841 imply SPL_LIBDISK_SUPPORT 842 imply SPL_LIBGENERIC_SUPPORT 843 imply SPL_MMC_SUPPORT if MMC 844 imply SPL_POWER_SUPPORT 845 imply SPL_SERIAL_SUPPORT 846 imply USB_GADGET 847 848config ARCH_VF610 849 bool "Freescale Vybrid" 850 select CPU_V7A 851 select SYS_FSL_ERRATUM_ESDHC111 852 imply CMD_MTDPARTS 853 imply NAND 854 855config ARCH_ZYNQ 856 bool "Xilinx Zynq based platform" 857 select BOARD_EARLY_INIT_F if WDT 858 select BOARD_LATE_INIT 859 select CLK 860 select CLK_ZYNQ 861 select CPU_V7A 862 select DM 863 select DM_ETH if NET 864 select DM_MMC if MMC 865 select DM_SERIAL 866 select DM_SPI 867 select DM_SPI_FLASH 868 select DM_USB if USB 869 select OF_CONTROL 870 select SPI 871 select SPL_BOARD_INIT if SPL 872 select SPL_CLK if SPL 873 select SPL_DM if SPL 874 select SPL_OF_CONTROL if SPL 875 select SPL_SEPARATE_BSS if SPL 876 select SUPPORT_SPL 877 imply ARCH_EARLY_INIT_R 878 imply CMD_CLK 879 imply CMD_DM 880 imply CMD_SPL 881 imply FAT_WRITE 882 883config ARCH_ZYNQMP_R5 884 bool "Xilinx ZynqMP R5 based platform" 885 select CLK 886 select CPU_V7R 887 select DM 888 select DM_SERIAL 889 select OF_CONTROL 890 imply CMD_DM 891 892config ARCH_ZYNQMP 893 bool "Xilinx ZynqMP based platform" 894 select ARM64 895 select BOARD_LATE_INIT 896 select CLK 897 select DM 898 select DM_SERIAL 899 select DM_USB if USB 900 select OF_CONTROL 901 select SPL_BOARD_INIT if SPL 902 select SPL_CLK if SPL 903 select SUPPORT_SPL 904 imply CMD_DM 905 imply FAT_WRITE 906 907config TEGRA 908 bool "NVIDIA Tegra" 909 imply DISTRO_DEFAULTS 910 imply FAT_WRITE 911 912config TARGET_VEXPRESS64_AEMV8A 913 bool "Support vexpress_aemv8a" 914 select ARM64 915 select PL01X_SERIAL 916 917config TARGET_VEXPRESS64_BASE_FVP 918 bool "Support Versatile Express ARMv8a FVP BASE model" 919 select ARM64 920 select PL01X_SERIAL 921 select SEMIHOSTING 922 923config TARGET_VEXPRESS64_BASE_FVP_DRAM 924 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 925 select ARM64 926 select PL01X_SERIAL 927 help 928 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 929 the default config to allow the user to load the images directly into 930 DRAM using model parameters rather than by using semi-hosting to load 931 the files from the host filesystem. 932 933config TARGET_VEXPRESS64_JUNO 934 bool "Support Versatile Express Juno Development Platform" 935 select ARM64 936 select PL01X_SERIAL 937 938config TARGET_LS2080A_EMU 939 bool "Support ls2080a_emu" 940 select ARCH_LS2080A 941 select ARCH_MISC_INIT 942 select ARM64 943 select ARMV8_MULTIENTRY 944 help 945 Support for Freescale LS2080A_EMU platform 946 The LS2080A Development System (EMULATOR) is a pre silicon 947 development platform that supports the QorIQ LS2080A 948 Layerscape Architecture processor. 949 950config TARGET_LS2080A_SIMU 951 bool "Support ls2080a_simu" 952 select ARCH_LS2080A 953 select ARCH_MISC_INIT 954 select ARM64 955 select ARMV8_MULTIENTRY 956 help 957 Support for Freescale LS2080A_SIMU platform 958 The LS2080A Development System (QDS) is a pre silicon 959 development platform that supports the QorIQ LS2080A 960 Layerscape Architecture processor. 961 962config TARGET_LS1088AQDS 963 bool "Support ls1088aqds" 964 select ARCH_LS1088A 965 select ARCH_MISC_INIT 966 select ARM64 967 select ARMV8_MULTIENTRY 968 select BOARD_LATE_INIT 969 select SUPPORT_SPL 970 help 971 Support for NXP LS1088AQDS platform 972 The LS1088A Development System (QDS) is a high-performance 973 development platform that supports the QorIQ LS1088A 974 Layerscape Architecture processor. 975 976config TARGET_LS2080AQDS 977 bool "Support ls2080aqds" 978 select ARCH_LS2080A 979 select ARCH_MISC_INIT 980 select ARM64 981 select ARMV8_MULTIENTRY 982 select BOARD_LATE_INIT 983 select SUPPORT_SPL 984 imply SCSI 985 imply SCSI_AHCI 986 help 987 Support for Freescale LS2080AQDS platform 988 The LS2080A Development System (QDS) is a high-performance 989 development platform that supports the QorIQ LS2080A 990 Layerscape Architecture processor. 991 992config TARGET_LS2080ARDB 993 bool "Support ls2080ardb" 994 select ARCH_LS2080A 995 select ARCH_MISC_INIT 996 select ARM64 997 select ARMV8_MULTIENTRY 998 select BOARD_LATE_INIT 999 select SUPPORT_SPL 1000 imply SCSI 1001 imply SCSI_AHCI 1002 help 1003 Support for Freescale LS2080ARDB platform. 1004 The LS2080A Reference design board (RDB) is a high-performance 1005 development platform that supports the QorIQ LS2080A 1006 Layerscape Architecture processor. 1007 1008config TARGET_LS2081ARDB 1009 bool "Support ls2081ardb" 1010 select ARCH_LS2080A 1011 select ARCH_MISC_INIT 1012 select ARM64 1013 select ARMV8_MULTIENTRY 1014 select BOARD_LATE_INIT 1015 select SUPPORT_SPL 1016 help 1017 Support for Freescale LS2081ARDB platform. 1018 The LS2081A Reference design board (RDB) is a high-performance 1019 development platform that supports the QorIQ LS2081A/LS2041A 1020 Layerscape Architecture processor. 1021 1022config TARGET_HIKEY 1023 bool "Support HiKey 96boards Consumer Edition Platform" 1024 select ARM64 1025 select DM 1026 select DM_GPIO 1027 select DM_SERIAL 1028 select OF_CONTROL 1029 select PL01X_SERIAL 1030 select SPECIFY_CONSOLE_INDEX 1031 imply CMD_DM 1032 help 1033 Support for HiKey 96boards platform. It features a HI6220 1034 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1035 1036config TARGET_POPLAR 1037 bool "Support Poplar 96boards Enterprise Edition Platform" 1038 select ARM64 1039 select DM 1040 select DM_SERIAL 1041 select DM_USB 1042 select OF_CONTROL 1043 select PL01X_SERIAL 1044 imply CMD_DM 1045 help 1046 Support for Poplar 96boards EE platform. It features a HI3798cv200 1047 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1048 making it capable of running any commercial set-top solution based on 1049 Linux or Android. 1050 1051config TARGET_LS1012AQDS 1052 bool "Support ls1012aqds" 1053 select ARCH_LS1012A 1054 select ARM64 1055 select BOARD_LATE_INIT 1056 help 1057 Support for Freescale LS1012AQDS platform. 1058 The LS1012A Development System (QDS) is a high-performance 1059 development platform that supports the QorIQ LS1012A 1060 Layerscape Architecture processor. 1061 1062config TARGET_LS1012ARDB 1063 bool "Support ls1012ardb" 1064 select ARCH_LS1012A 1065 select ARM64 1066 select BOARD_LATE_INIT 1067 imply SCSI 1068 imply SCSI_AHCI 1069 help 1070 Support for Freescale LS1012ARDB platform. 1071 The LS1012A Reference design board (RDB) is a high-performance 1072 development platform that supports the QorIQ LS1012A 1073 Layerscape Architecture processor. 1074 1075config TARGET_LS1012A2G5RDB 1076 bool "Support ls1012a2g5rdb" 1077 select ARCH_LS1012A 1078 select ARM64 1079 select BOARD_LATE_INIT 1080 imply SCSI 1081 help 1082 Support for Freescale LS1012A2G5RDB platform. 1083 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1084 development platform that supports the QorIQ LS1012A 1085 Layerscape Architecture processor. 1086 1087config TARGET_LS1012AFRWY 1088 bool "Support ls1012afrwy" 1089 select ARCH_LS1012A 1090 select ARM64 1091 select BOARD_LATE_INIT 1092 imply SCSI 1093 imply SCSI_AHCI 1094 help 1095 Support for Freescale LS1012AFRWY platform. 1096 The LS1012A FRWY board (FRWY) is a high-performance 1097 development platform that supports the QorIQ LS1012A 1098 Layerscape Architecture processor. 1099 1100config TARGET_LS1012AFRDM 1101 bool "Support ls1012afrdm" 1102 select ARCH_LS1012A 1103 select ARM64 1104 help 1105 Support for Freescale LS1012AFRDM platform. 1106 The LS1012A Freedom board (FRDM) is a high-performance 1107 development platform that supports the QorIQ LS1012A 1108 Layerscape Architecture processor. 1109 1110config TARGET_LS1088ARDB 1111 bool "Support ls1088ardb" 1112 select ARCH_LS1088A 1113 select ARCH_MISC_INIT 1114 select ARM64 1115 select ARMV8_MULTIENTRY 1116 select BOARD_LATE_INIT 1117 select SUPPORT_SPL 1118 help 1119 Support for NXP LS1088ARDB platform. 1120 The LS1088A Reference design board (RDB) is a high-performance 1121 development platform that supports the QorIQ LS1088A 1122 Layerscape Architecture processor. 1123 1124config TARGET_LS1021AQDS 1125 bool "Support ls1021aqds" 1126 select ARCH_LS1021A 1127 select ARCH_SUPPORT_PSCI 1128 select BOARD_EARLY_INIT_F 1129 select BOARD_LATE_INIT 1130 select CPU_V7A 1131 select CPU_V7_HAS_NONSEC 1132 select CPU_V7_HAS_VIRT 1133 select LS1_DEEP_SLEEP 1134 select SUPPORT_SPL 1135 select SYS_FSL_DDR 1136 imply SCSI 1137 1138config TARGET_LS1021ATWR 1139 bool "Support ls1021atwr" 1140 select ARCH_LS1021A 1141 select ARCH_SUPPORT_PSCI 1142 select BOARD_EARLY_INIT_F 1143 select BOARD_LATE_INIT 1144 select CPU_V7A 1145 select CPU_V7_HAS_NONSEC 1146 select CPU_V7_HAS_VIRT 1147 select LS1_DEEP_SLEEP 1148 select SUPPORT_SPL 1149 imply SCSI 1150 1151config TARGET_LS1021AIOT 1152 bool "Support ls1021aiot" 1153 select ARCH_LS1021A 1154 select ARCH_SUPPORT_PSCI 1155 select BOARD_LATE_INIT 1156 select CPU_V7A 1157 select CPU_V7_HAS_NONSEC 1158 select CPU_V7_HAS_VIRT 1159 select SUPPORT_SPL 1160 imply SCSI 1161 help 1162 Support for Freescale LS1021AIOT platform. 1163 The LS1021A Freescale board (IOT) is a high-performance 1164 development platform that supports the QorIQ LS1021A 1165 Layerscape Architecture processor. 1166 1167config TARGET_LS1043AQDS 1168 bool "Support ls1043aqds" 1169 select ARCH_LS1043A 1170 select ARM64 1171 select ARMV8_MULTIENTRY 1172 select BOARD_EARLY_INIT_F 1173 select BOARD_LATE_INIT 1174 select SUPPORT_SPL 1175 imply SCSI 1176 help 1177 Support for Freescale LS1043AQDS platform. 1178 1179config TARGET_LS1043ARDB 1180 bool "Support ls1043ardb" 1181 select ARCH_LS1043A 1182 select ARM64 1183 select ARMV8_MULTIENTRY 1184 select BOARD_EARLY_INIT_F 1185 select BOARD_LATE_INIT 1186 select SUPPORT_SPL 1187 imply SCSI 1188 help 1189 Support for Freescale LS1043ARDB platform. 1190 1191config TARGET_LS1046AQDS 1192 bool "Support ls1046aqds" 1193 select ARCH_LS1046A 1194 select ARM64 1195 select ARMV8_MULTIENTRY 1196 select BOARD_EARLY_INIT_F 1197 select BOARD_LATE_INIT 1198 select DM_SPI_FLASH if DM_SPI 1199 select SUPPORT_SPL 1200 imply SCSI 1201 help 1202 Support for Freescale LS1046AQDS platform. 1203 The LS1046A Development System (QDS) is a high-performance 1204 development platform that supports the QorIQ LS1046A 1205 Layerscape Architecture processor. 1206 1207config TARGET_LS1046ARDB 1208 bool "Support ls1046ardb" 1209 select ARCH_LS1046A 1210 select ARM64 1211 select ARMV8_MULTIENTRY 1212 select BOARD_EARLY_INIT_F 1213 select BOARD_LATE_INIT 1214 select DM_SPI_FLASH if DM_SPI 1215 select POWER_MC34VR500 1216 select SUPPORT_SPL 1217 imply SCSI 1218 help 1219 Support for Freescale LS1046ARDB platform. 1220 The LS1046A Reference Design Board (RDB) is a high-performance 1221 development platform that supports the QorIQ LS1046A 1222 Layerscape Architecture processor. 1223 1224config TARGET_H2200 1225 bool "Support h2200" 1226 select CPU_PXA 1227 1228config TARGET_ZIPITZ2 1229 bool "Support zipitz2" 1230 select CPU_PXA 1231 1232config TARGET_COLIBRI_PXA270 1233 bool "Support colibri_pxa270" 1234 select CPU_PXA 1235 1236config ARCH_UNIPHIER 1237 bool "Socionext UniPhier SoCs" 1238 select BOARD_LATE_INIT 1239 select DM 1240 select DM_GPIO 1241 select DM_I2C 1242 select DM_MMC 1243 select DM_RESET 1244 select DM_SERIAL 1245 select DM_USB 1246 select OF_BOARD_SETUP 1247 select OF_CONTROL 1248 select OF_LIBFDT 1249 select PINCTRL 1250 select SPL_BOARD_INIT if SPL 1251 select SPL_DM if SPL 1252 select SPL_LIBCOMMON_SUPPORT if SPL 1253 select SPL_LIBGENERIC_SUPPORT if SPL 1254 select SPL_OF_CONTROL if SPL 1255 select SPL_PINCTRL if SPL 1256 select SUPPORT_SPL 1257 imply CMD_DM 1258 imply DISTRO_DEFAULTS 1259 imply FAT_WRITE 1260 help 1261 Support for UniPhier SoC family developed by Socionext Inc. 1262 (formerly, System LSI Business Division of Panasonic Corporation) 1263 1264config STM32 1265 bool "Support STMicroelectronics STM32 MCU with cortex M" 1266 select CPU_V7M 1267 select DM 1268 select DM_SERIAL 1269 select SYS_THUMB_BUILD 1270 imply CMD_DM 1271 1272config ARCH_STI 1273 bool "Support STMicrolectronics SoCs" 1274 select BLK 1275 select CPU_V7A 1276 select DM 1277 select DM_MMC 1278 select DM_RESET 1279 select DM_SERIAL 1280 imply CMD_DM 1281 help 1282 Support for STMicroelectronics STiH407/10 SoC family. 1283 This SoC is used on Linaro 96Board STiH410-B2260 1284 1285config ARCH_STM32MP 1286 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1287 select ARCH_MISC_INIT 1288 select BOARD_LATE_INIT 1289 select CLK 1290 select DM 1291 select DM_GPIO 1292 select DM_RESET 1293 select DM_SERIAL 1294 select MISC 1295 select OF_CONTROL 1296 select OF_LIBFDT 1297 select PINCTRL 1298 select REGMAP 1299 select SUPPORT_SPL 1300 select SYSCON 1301 select SYSRESET 1302 select SYS_THUMB_BUILD 1303 imply CMD_DM 1304 help 1305 Support for STM32MP SoC family developed by STMicroelectronics, 1306 MPUs based on ARM cortex A core 1307 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1308 BootLoader (FSBL) 1309 1310config ARCH_ROCKCHIP 1311 bool "Support Rockchip SoCs" 1312 select BLK 1313 select DM 1314 select DM_GPIO 1315 select DM_I2C 1316 select DM_MMC 1317 select DM_PWM 1318 select DM_REGULATOR 1319 select DM_SERIAL 1320 select DM_SPI 1321 select DM_SPI_FLASH 1322 select DM_USB if USB 1323 select ENABLE_ARM_SOC_BOOT0_HOOK 1324 select OF_CONTROL 1325 select SPI 1326 select SPL_DM if SPL 1327 select SPL_SYS_MALLOC_SIMPLE if SPL 1328 select SYS_MALLOC_F 1329 select SYS_THUMB_BUILD if !ARM64 1330 imply ADC 1331 imply CMD_DM 1332 imply DISTRO_DEFAULTS 1333 imply FAT_WRITE 1334 imply SARADC_ROCKCHIP 1335 imply SPL_SYSRESET 1336 imply SYS_NS16550 1337 imply TPL_SYSRESET 1338 imply USB_FUNCTION_FASTBOOT 1339 1340config TARGET_THUNDERX_88XX 1341 bool "Support ThunderX 88xx" 1342 select ARM64 1343 select OF_CONTROL 1344 select PL01X_SERIAL 1345 select SYS_CACHE_SHIFT_7 1346 1347config ARCH_ASPEED 1348 bool "Support Aspeed SoCs" 1349 select DM 1350 select OF_CONTROL 1351 imply CMD_DM 1352 1353endchoice 1354 1355config TI_SECURE_DEVICE 1356 bool "HS Device Type Support" 1357 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1358 help 1359 If a high secure (HS) device type is being used, this config 1360 must be set. This option impacts various aspects of the 1361 build system (to create signed boot images that can be 1362 authenticated) and the code. See the doc/README.ti-secure 1363 file for further details. 1364 1365source "arch/arm/mach-aspeed/Kconfig" 1366 1367source "arch/arm/mach-at91/Kconfig" 1368 1369source "arch/arm/mach-bcm283x/Kconfig" 1370 1371source "arch/arm/mach-bcmstb/Kconfig" 1372 1373source "arch/arm/mach-davinci/Kconfig" 1374 1375source "arch/arm/mach-exynos/Kconfig" 1376 1377source "arch/arm/mach-highbank/Kconfig" 1378 1379source "arch/arm/mach-integrator/Kconfig" 1380 1381source "arch/arm/mach-keystone/Kconfig" 1382 1383source "arch/arm/mach-kirkwood/Kconfig" 1384 1385source "arch/arm/mach-mvebu/Kconfig" 1386 1387source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1388 1389source "arch/arm/mach-imx/mx2/Kconfig" 1390 1391source "arch/arm/mach-imx/mx3/Kconfig" 1392 1393source "arch/arm/mach-imx/mx5/Kconfig" 1394 1395source "arch/arm/mach-imx/mx6/Kconfig" 1396 1397source "arch/arm/mach-imx/mx7/Kconfig" 1398 1399source "arch/arm/mach-imx/mx7ulp/Kconfig" 1400 1401source "arch/arm/mach-imx/mx8m/Kconfig" 1402 1403source "arch/arm/mach-imx/mxs/Kconfig" 1404 1405source "arch/arm/mach-omap2/Kconfig" 1406 1407source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1408 1409source "arch/arm/mach-orion5x/Kconfig" 1410 1411source "arch/arm/mach-owl/Kconfig" 1412 1413source "arch/arm/mach-rmobile/Kconfig" 1414 1415source "arch/arm/mach-meson/Kconfig" 1416 1417source "arch/arm/mach-qemu/Kconfig" 1418 1419source "arch/arm/mach-rockchip/Kconfig" 1420 1421source "arch/arm/mach-s5pc1xx/Kconfig" 1422 1423source "arch/arm/mach-snapdragon/Kconfig" 1424 1425source "arch/arm/mach-socfpga/Kconfig" 1426 1427source "arch/arm/mach-sti/Kconfig" 1428 1429source "arch/arm/mach-stm32/Kconfig" 1430 1431source "arch/arm/mach-stm32mp/Kconfig" 1432 1433source "arch/arm/mach-sunxi/Kconfig" 1434 1435source "arch/arm/mach-tegra/Kconfig" 1436 1437source "arch/arm/mach-uniphier/Kconfig" 1438 1439source "arch/arm/cpu/armv7/vf610/Kconfig" 1440 1441source "arch/arm/mach-zynq/Kconfig" 1442 1443source "arch/arm/mach-zynqmp-r5/Kconfig" 1444 1445source "arch/arm/cpu/armv7/Kconfig" 1446 1447source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1448 1449source "arch/arm/cpu/armv8/Kconfig" 1450 1451source "arch/arm/mach-imx/Kconfig" 1452 1453source "board/bosch/shc/Kconfig" 1454source "board/CarMediaLab/flea3/Kconfig" 1455source "board/Marvell/aspenite/Kconfig" 1456source "board/Marvell/gplugd/Kconfig" 1457source "board/armadeus/apf27/Kconfig" 1458source "board/armltd/vexpress/Kconfig" 1459source "board/armltd/vexpress64/Kconfig" 1460source "board/broadcom/bcm23550_w1d/Kconfig" 1461source "board/broadcom/bcm28155_ap/Kconfig" 1462source "board/broadcom/bcmcygnus/Kconfig" 1463source "board/broadcom/bcmnsp/Kconfig" 1464source "board/broadcom/bcmns2/Kconfig" 1465source "board/cavium/thunderx/Kconfig" 1466source "board/cirrus/edb93xx/Kconfig" 1467source "board/eets/pdu001/Kconfig" 1468source "board/freescale/ls2080a/Kconfig" 1469source "board/freescale/ls2080aqds/Kconfig" 1470source "board/freescale/ls2080ardb/Kconfig" 1471source "board/freescale/ls1088a/Kconfig" 1472source "board/freescale/ls1021aqds/Kconfig" 1473source "board/freescale/ls1043aqds/Kconfig" 1474source "board/freescale/ls1021atwr/Kconfig" 1475source "board/freescale/ls1021aiot/Kconfig" 1476source "board/freescale/ls1046aqds/Kconfig" 1477source "board/freescale/ls1043ardb/Kconfig" 1478source "board/freescale/ls1046ardb/Kconfig" 1479source "board/freescale/ls1012aqds/Kconfig" 1480source "board/freescale/ls1012ardb/Kconfig" 1481source "board/freescale/ls1012afrdm/Kconfig" 1482source "board/freescale/mx35pdk/Kconfig" 1483source "board/freescale/s32v234evb/Kconfig" 1484source "board/grinn/chiliboard/Kconfig" 1485source "board/gumstix/pepper/Kconfig" 1486source "board/h2200/Kconfig" 1487source "board/hisilicon/hikey/Kconfig" 1488source "board/hisilicon/poplar/Kconfig" 1489source "board/isee/igep003x/Kconfig" 1490source "board/phytec/pcm051/Kconfig" 1491source "board/silica/pengwyn/Kconfig" 1492source "board/spear/spear300/Kconfig" 1493source "board/spear/spear310/Kconfig" 1494source "board/spear/spear320/Kconfig" 1495source "board/spear/spear600/Kconfig" 1496source "board/spear/x600/Kconfig" 1497source "board/st/stv0991/Kconfig" 1498source "board/tcl/sl50/Kconfig" 1499source "board/ucRobotics/bubblegum_96/Kconfig" 1500source "board/birdland/bav335x/Kconfig" 1501source "board/timll/devkit3250/Kconfig" 1502source "board/toradex/colibri_pxa270/Kconfig" 1503source "board/vscom/baltos/Kconfig" 1504source "board/woodburn/Kconfig" 1505source "board/work-microwave/work_92105/Kconfig" 1506source "board/xilinx/Kconfig" 1507source "board/xilinx/zynq/Kconfig" 1508source "board/xilinx/zynqmp/Kconfig" 1509source "board/zipitz2/Kconfig" 1510 1511source "arch/arm/Kconfig.debug" 1512 1513endmenu 1514 1515config SPL_LDSCRIPT 1516 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1517 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1518 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1519 1520 1521