1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_DEVKIT3250 447 bool "Support devkit3250" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_WORK_92105 452 bool "Support work_92105" 453 select CPU_ARM926EJS 454 select SUPPORT_SPL 455 456config TARGET_APF27 457 bool "Support apf27" 458 select CPU_ARM926EJS 459 select SUPPORT_SPL 460 461config ORION5X 462 bool "Marvell Orion" 463 select CPU_ARM926EJS 464 465config TARGET_SPEAR300 466 bool "Support spear300" 467 select BOARD_EARLY_INIT_F 468 select CPU_ARM926EJS 469 select PL011_SERIAL 470 imply CMD_SAVES 471 472config TARGET_SPEAR310 473 bool "Support spear310" 474 select BOARD_EARLY_INIT_F 475 select CPU_ARM926EJS 476 select PL011_SERIAL 477 imply CMD_SAVES 478 479config TARGET_SPEAR320 480 bool "Support spear320" 481 select BOARD_EARLY_INIT_F 482 select CPU_ARM926EJS 483 select PL011_SERIAL 484 imply CMD_SAVES 485 486config TARGET_SPEAR600 487 bool "Support spear600" 488 select BOARD_EARLY_INIT_F 489 select CPU_ARM926EJS 490 select PL011_SERIAL 491 imply CMD_SAVES 492 493config TARGET_STV0991 494 bool "Support stv0991" 495 select CPU_V7A 496 select DM 497 select DM_SERIAL 498 select DM_SPI 499 select DM_SPI_FLASH 500 select PL01X_SERIAL 501 select SPI 502 select SPI_FLASH 503 imply CMD_DM 504 505config TARGET_X600 506 bool "Support x600" 507 select BOARD_LATE_INIT 508 select CPU_ARM926EJS 509 select PL011_SERIAL 510 select SUPPORT_SPL 511 512config TARGET_WOODBURN 513 bool "Support woodburn" 514 select CPU_ARM1136 515 516config TARGET_WOODBURN_SD 517 bool "Support woodburn_sd" 518 select CPU_ARM1136 519 select SUPPORT_SPL 520 521config TARGET_FLEA3 522 bool "Support flea3" 523 select CPU_ARM1136 524 525config TARGET_MX35PDK 526 bool "Support mx35pdk" 527 select BOARD_LATE_INIT 528 select CPU_ARM1136 529 530config ARCH_BCM283X 531 bool "Broadcom BCM283X family" 532 select DM 533 select DM_GPIO 534 select DM_SERIAL 535 select OF_CONTROL 536 select PL01X_SERIAL 537 select SERIAL_SEARCH_ALL 538 imply CMD_DM 539 imply FAT_WRITE 540 541config TARGET_VEXPRESS_CA15_TC2 542 bool "Support vexpress_ca15_tc2" 543 select CPU_V7A 544 select CPU_V7_HAS_NONSEC 545 select CPU_V7_HAS_VIRT 546 select PL011_SERIAL 547 548config ARCH_BCMSTB 549 bool "Broadcom BCM7XXX family" 550 select CPU_V7A 551 select DM 552 select OF_CONTROL 553 select OF_PRIOR_STAGE 554 imply CMD_DM 555 help 556 This enables support for Broadcom ARM-based set-top box 557 chipsets, including the 7445 family of chips. 558 559config TARGET_VEXPRESS_CA5X2 560 bool "Support vexpress_ca5x2" 561 select CPU_V7A 562 select PL011_SERIAL 563 564config TARGET_VEXPRESS_CA9X4 565 bool "Support vexpress_ca9x4" 566 select CPU_V7A 567 select PL011_SERIAL 568 569config TARGET_BCM23550_W1D 570 bool "Support bcm23550_w1d" 571 select CPU_V7A 572 imply CRC32_VERIFY 573 imply FAT_WRITE 574 575config TARGET_BCM28155_AP 576 bool "Support bcm28155_ap" 577 select CPU_V7A 578 imply CRC32_VERIFY 579 imply FAT_WRITE 580 581config TARGET_BCMCYGNUS 582 bool "Support bcmcygnus" 583 select CPU_V7A 584 imply BCM_SF2_ETH 585 imply BCM_SF2_ETH_GMAC 586 imply CMD_HASH 587 imply CRC32_VERIFY 588 imply FAT_WRITE 589 imply HASH_VERIFY 590 imply NETDEVICES 591 592config TARGET_BCMNSP 593 bool "Support bcmnsp" 594 select CPU_V7A 595 596config TARGET_BCMNS2 597 bool "Support Broadcom Northstar2" 598 select ARM64 599 help 600 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 601 ARMv8 Cortex-A57 processors targeting a broad range of networking 602 applications 603 604config ARCH_EXYNOS 605 bool "Samsung EXYNOS" 606 select DM 607 select DM_GPIO 608 select DM_I2C 609 select DM_KEYBOARD 610 select DM_SERIAL 611 select DM_SPI 612 select DM_SPI_FLASH 613 select SPI 614 imply CMD_DM 615 imply FAT_WRITE 616 617config ARCH_S5PC1XX 618 bool "Samsung S5PC1XX" 619 select CPU_V7A 620 select DM 621 select DM_GPIO 622 select DM_I2C 623 select DM_SERIAL 624 imply CMD_DM 625 626config ARCH_HIGHBANK 627 bool "Calxeda Highbank" 628 select CPU_V7A 629 select PL011_SERIAL 630 631config ARCH_INTEGRATOR 632 bool "ARM Ltd. Integrator family" 633 select DM 634 select DM_SERIAL 635 select PL01X_SERIAL 636 imply CMD_DM 637 638config ARCH_KEYSTONE 639 bool "TI Keystone" 640 select CMD_POWEROFF 641 select CPU_V7A 642 select SUPPORT_SPL 643 select SYS_ARCH_TIMER 644 select SYS_THUMB_BUILD 645 imply CMD_MTDPARTS 646 imply CMD_SAVES 647 imply FIT 648 649config ARCH_K3 650 bool "Texas Instruments' K3 Architecture" 651 select SPL 652 select SUPPORT_SPL 653 select FIT 654 655config ARCH_OMAP2PLUS 656 bool "TI OMAP2+" 657 select CPU_V7A 658 select SPL_BOARD_INIT if SPL 659 select SPL_STACK_R if SPL 660 select SUPPORT_SPL 661 imply FIT 662 663config ARCH_MESON 664 bool "Amlogic Meson" 665 imply DISTRO_DEFAULTS 666 help 667 Support for the Meson SoC family developed by Amlogic Inc., 668 targeted at media players and tablet computers. We currently 669 support the S905 (GXBaby) 64-bit SoC. 670 671config ARCH_MX8M 672 bool "NXP i.MX8M platform" 673 select ARM64 674 select DM 675 select SUPPORT_SPL 676 imply CMD_DM 677 678config ARCH_MX23 679 bool "NXP i.MX23 family" 680 select CPU_ARM926EJS 681 select PL011_SERIAL 682 select SUPPORT_SPL 683 684config ARCH_MX25 685 bool "NXP MX25" 686 select CPU_ARM926EJS 687 imply MXC_GPIO 688 689config ARCH_MX28 690 bool "NXP i.MX28 family" 691 select CPU_ARM926EJS 692 select PL011_SERIAL 693 select SUPPORT_SPL 694 695config ARCH_MX31 696 bool "NXP i.MX31 family" 697 select CPU_ARM1136 698 699config ARCH_MX7ULP 700 bool "NXP MX7ULP" 701 select CPU_V7A 702 select ROM_UNIFIED_SECTIONS 703 imply MXC_GPIO 704 705config ARCH_MX7 706 bool "Freescale MX7" 707 select ARCH_MISC_INIT 708 select BOARD_EARLY_INIT_F 709 select CPU_V7A 710 select SYS_FSL_HAS_SEC if SECURE_BOOT 711 select SYS_FSL_SEC_COMPAT_4 712 select SYS_FSL_SEC_LE 713 imply MXC_GPIO 714 715config ARCH_MX6 716 bool "Freescale MX6" 717 select CPU_V7A 718 select SYS_FSL_HAS_SEC if SECURE_BOOT 719 select SYS_FSL_SEC_COMPAT_4 720 select SYS_FSL_SEC_LE 721 select SYS_THUMB_BUILD if SPL 722 imply MXC_GPIO 723 724if ARCH_MX6 725config SPL_LDSCRIPT 726 default "arch/arm/mach-omap2/u-boot-spl.lds" 727endif 728 729config ARCH_MX5 730 bool "Freescale MX5" 731 select BOARD_EARLY_INIT_F 732 select CPU_V7A 733 imply MXC_GPIO 734 735config ARCH_OWL 736 bool "Actions Semi OWL SoCs" 737 select ARM64 738 select DM 739 select DM_SERIAL 740 select OF_CONTROL 741 imply CMD_DM 742 743config ARCH_QEMU 744 bool "QEMU Virtual Platform" 745 select DM 746 select DM_SERIAL 747 select OF_CONTROL 748 select PL01X_SERIAL 749 imply CMD_DM 750 imply DM_RTC 751 imply RTC_PL031 752 753config ARCH_RMOBILE 754 bool "Renesas ARM SoCs" 755 select BOARD_EARLY_INIT_F 756 select DM 757 select DM_SERIAL 758 imply CMD_DM 759 imply FAT_WRITE 760 imply SYS_THUMB_BUILD 761 762config TARGET_S32V234EVB 763 bool "Support s32v234evb" 764 select ARM64 765 select SYS_FSL_ERRATUM_ESDHC111 766 767config ARCH_SNAPDRAGON 768 bool "Qualcomm Snapdragon SoCs" 769 select ARM64 770 select DM 771 select DM_GPIO 772 select DM_SERIAL 773 select MSM_SMEM 774 select OF_CONTROL 775 select OF_SEPARATE 776 select SMEM 777 select SPMI 778 imply CMD_DM 779 780config ARCH_SOCFPGA 781 bool "Altera SOCFPGA family" 782 select ARCH_EARLY_INIT_R 783 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 784 select ARM64 if TARGET_SOCFPGA_STRATIX10 785 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 786 select DM 787 select DM_SERIAL 788 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 789 select OF_CONTROL 790 select SPL_DM_RESET if DM_RESET 791 select SPL_DM_SERIAL 792 select SPL_LIBCOMMON_SUPPORT 793 select SPL_LIBDISK_SUPPORT 794 select SPL_LIBGENERIC_SUPPORT 795 select SPL_MMC_SUPPORT if DM_MMC 796 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 797 select SPL_OF_CONTROL 798 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 799 select SPL_SERIAL_SUPPORT 800 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 801 select SPL_SPI_SUPPORT if DM_SPI 802 select SPL_WATCHDOG_SUPPORT 803 select SUPPORT_SPL 804 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 805 select SYS_NS16550 806 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 807 imply CMD_DM 808 imply CMD_MTDPARTS 809 imply CRC32_VERIFY 810 imply DM_SPI 811 imply DM_SPI_FLASH 812 imply FAT_WRITE 813 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 814 815config ARCH_SUNXI 816 bool "Support sunxi (Allwinner) SoCs" 817 select BINMAN 818 select CMD_GPIO 819 select CMD_MMC if MMC 820 select CMD_USB if DISTRO_DEFAULTS 821 select DM 822 select DM_ETH 823 select DM_GPIO 824 select DM_KEYBOARD 825 select DM_SERIAL 826 select DM_USB if DISTRO_DEFAULTS 827 select OF_BOARD_SETUP 828 select OF_CONTROL 829 select OF_SEPARATE 830 select SPECIFY_CONSOLE_INDEX 831 select SPL_STACK_R if SPL 832 select SPL_SYS_MALLOC_SIMPLE if SPL 833 select SPL_SYS_THUMB_BUILD if !ARM64 834 select SYS_NS16550 835 select SYS_THUMB_BUILD if !ARM64 836 select USB if DISTRO_DEFAULTS 837 select USB_KEYBOARD if DISTRO_DEFAULTS 838 select USB_STORAGE if DISTRO_DEFAULTS 839 select USE_TINY_PRINTF 840 imply CMD_DM 841 imply CMD_GPT 842 imply CMD_UBI if NAND 843 imply DISTRO_DEFAULTS 844 imply FAT_WRITE 845 imply OF_LIBFDT_OVERLAY 846 imply PRE_CONSOLE_BUFFER 847 imply SPL_GPIO_SUPPORT 848 imply SPL_LIBCOMMON_SUPPORT 849 imply SPL_LIBDISK_SUPPORT 850 imply SPL_LIBGENERIC_SUPPORT 851 imply SPL_MMC_SUPPORT if MMC 852 imply SPL_POWER_SUPPORT 853 imply SPL_SERIAL_SUPPORT 854 imply USB_GADGET 855 856config ARCH_VF610 857 bool "Freescale Vybrid" 858 select CPU_V7A 859 select SYS_FSL_ERRATUM_ESDHC111 860 imply CMD_MTDPARTS 861 imply NAND 862 863config ARCH_ZYNQ 864 bool "Xilinx Zynq based platform" 865 select BOARD_EARLY_INIT_F if WDT 866 select BOARD_LATE_INIT 867 select CLK 868 select CLK_ZYNQ 869 select CPU_V7A 870 select DM 871 select DM_ETH if NET 872 select DM_MMC if MMC 873 select DM_SERIAL 874 select DM_SPI 875 select DM_SPI_FLASH 876 select DM_USB if USB 877 select OF_CONTROL 878 select SPI 879 select SPL_BOARD_INIT if SPL 880 select SPL_CLK if SPL 881 select SPL_DM if SPL 882 select SPL_OF_CONTROL if SPL 883 select SPL_SEPARATE_BSS if SPL 884 select SUPPORT_SPL 885 imply ARCH_EARLY_INIT_R 886 imply CMD_CLK 887 imply CMD_DM 888 imply CMD_SPL 889 imply FAT_WRITE 890 891config ARCH_ZYNQMP_R5 892 bool "Xilinx ZynqMP R5 based platform" 893 select CLK 894 select CPU_V7R 895 select DM 896 select DM_SERIAL 897 select OF_CONTROL 898 imply CMD_DM 899 900config ARCH_ZYNQMP 901 bool "Xilinx ZynqMP based platform" 902 select ARM64 903 select BOARD_LATE_INIT 904 select CLK 905 select DM 906 select DM_SERIAL 907 select DM_USB if USB 908 select OF_CONTROL 909 select SPL_BOARD_INIT if SPL 910 select SPL_CLK if SPL 911 select SUPPORT_SPL 912 imply CMD_DM 913 imply FAT_WRITE 914 915config TEGRA 916 bool "NVIDIA Tegra" 917 imply DISTRO_DEFAULTS 918 imply FAT_WRITE 919 920config TARGET_VEXPRESS64_AEMV8A 921 bool "Support vexpress_aemv8a" 922 select ARM64 923 select PL01X_SERIAL 924 925config TARGET_VEXPRESS64_BASE_FVP 926 bool "Support Versatile Express ARMv8a FVP BASE model" 927 select ARM64 928 select PL01X_SERIAL 929 select SEMIHOSTING 930 931config TARGET_VEXPRESS64_BASE_FVP_DRAM 932 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 933 select ARM64 934 select PL01X_SERIAL 935 help 936 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 937 the default config to allow the user to load the images directly into 938 DRAM using model parameters rather than by using semi-hosting to load 939 the files from the host filesystem. 940 941config TARGET_VEXPRESS64_JUNO 942 bool "Support Versatile Express Juno Development Platform" 943 select ARM64 944 select PL01X_SERIAL 945 946config TARGET_LS2080A_EMU 947 bool "Support ls2080a_emu" 948 select ARCH_LS2080A 949 select ARCH_MISC_INIT 950 select ARM64 951 select ARMV8_MULTIENTRY 952 help 953 Support for Freescale LS2080A_EMU platform 954 The LS2080A Development System (EMULATOR) is a pre silicon 955 development platform that supports the QorIQ LS2080A 956 Layerscape Architecture processor. 957 958config TARGET_LS2080A_SIMU 959 bool "Support ls2080a_simu" 960 select ARCH_LS2080A 961 select ARCH_MISC_INIT 962 select ARM64 963 select ARMV8_MULTIENTRY 964 help 965 Support for Freescale LS2080A_SIMU platform 966 The LS2080A Development System (QDS) is a pre silicon 967 development platform that supports the QorIQ LS2080A 968 Layerscape Architecture processor. 969 970config TARGET_LS1088AQDS 971 bool "Support ls1088aqds" 972 select ARCH_LS1088A 973 select ARCH_MISC_INIT 974 select ARM64 975 select ARMV8_MULTIENTRY 976 select BOARD_LATE_INIT 977 select SUPPORT_SPL 978 help 979 Support for NXP LS1088AQDS platform 980 The LS1088A Development System (QDS) is a high-performance 981 development platform that supports the QorIQ LS1088A 982 Layerscape Architecture processor. 983 984config TARGET_LS2080AQDS 985 bool "Support ls2080aqds" 986 select ARCH_LS2080A 987 select ARCH_MISC_INIT 988 select ARM64 989 select ARMV8_MULTIENTRY 990 select BOARD_LATE_INIT 991 select SUPPORT_SPL 992 imply SCSI 993 imply SCSI_AHCI 994 help 995 Support for Freescale LS2080AQDS platform 996 The LS2080A Development System (QDS) is a high-performance 997 development platform that supports the QorIQ LS2080A 998 Layerscape Architecture processor. 999 1000config TARGET_LS2080ARDB 1001 bool "Support ls2080ardb" 1002 select ARCH_LS2080A 1003 select ARCH_MISC_INIT 1004 select ARM64 1005 select ARMV8_MULTIENTRY 1006 select BOARD_LATE_INIT 1007 select SUPPORT_SPL 1008 imply SCSI 1009 imply SCSI_AHCI 1010 help 1011 Support for Freescale LS2080ARDB platform. 1012 The LS2080A Reference design board (RDB) is a high-performance 1013 development platform that supports the QorIQ LS2080A 1014 Layerscape Architecture processor. 1015 1016config TARGET_LS2081ARDB 1017 bool "Support ls2081ardb" 1018 select ARCH_LS2080A 1019 select ARCH_MISC_INIT 1020 select ARM64 1021 select ARMV8_MULTIENTRY 1022 select BOARD_LATE_INIT 1023 select SUPPORT_SPL 1024 help 1025 Support for Freescale LS2081ARDB platform. 1026 The LS2081A Reference design board (RDB) is a high-performance 1027 development platform that supports the QorIQ LS2081A/LS2041A 1028 Layerscape Architecture processor. 1029 1030config TARGET_HIKEY 1031 bool "Support HiKey 96boards Consumer Edition Platform" 1032 select ARM64 1033 select DM 1034 select DM_GPIO 1035 select DM_SERIAL 1036 select OF_CONTROL 1037 select PL01X_SERIAL 1038 select SPECIFY_CONSOLE_INDEX 1039 imply CMD_DM 1040 help 1041 Support for HiKey 96boards platform. It features a HI6220 1042 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1043 1044config TARGET_POPLAR 1045 bool "Support Poplar 96boards Enterprise Edition Platform" 1046 select ARM64 1047 select DM 1048 select DM_SERIAL 1049 select DM_USB 1050 select OF_CONTROL 1051 select PL01X_SERIAL 1052 imply CMD_DM 1053 help 1054 Support for Poplar 96boards EE platform. It features a HI3798cv200 1055 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1056 making it capable of running any commercial set-top solution based on 1057 Linux or Android. 1058 1059config TARGET_LS1012AQDS 1060 bool "Support ls1012aqds" 1061 select ARCH_LS1012A 1062 select ARM64 1063 select BOARD_LATE_INIT 1064 help 1065 Support for Freescale LS1012AQDS platform. 1066 The LS1012A Development System (QDS) is a high-performance 1067 development platform that supports the QorIQ LS1012A 1068 Layerscape Architecture processor. 1069 1070config TARGET_LS1012ARDB 1071 bool "Support ls1012ardb" 1072 select ARCH_LS1012A 1073 select ARM64 1074 select BOARD_LATE_INIT 1075 imply SCSI 1076 imply SCSI_AHCI 1077 help 1078 Support for Freescale LS1012ARDB platform. 1079 The LS1012A Reference design board (RDB) is a high-performance 1080 development platform that supports the QorIQ LS1012A 1081 Layerscape Architecture processor. 1082 1083config TARGET_LS1012A2G5RDB 1084 bool "Support ls1012a2g5rdb" 1085 select ARCH_LS1012A 1086 select ARM64 1087 select BOARD_LATE_INIT 1088 imply SCSI 1089 help 1090 Support for Freescale LS1012A2G5RDB platform. 1091 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1092 development platform that supports the QorIQ LS1012A 1093 Layerscape Architecture processor. 1094 1095config TARGET_LS1012AFRWY 1096 bool "Support ls1012afrwy" 1097 select ARCH_LS1012A 1098 select ARM64 1099 select BOARD_LATE_INIT 1100 imply SCSI 1101 imply SCSI_AHCI 1102 help 1103 Support for Freescale LS1012AFRWY platform. 1104 The LS1012A FRWY board (FRWY) is a high-performance 1105 development platform that supports the QorIQ LS1012A 1106 Layerscape Architecture processor. 1107 1108config TARGET_LS1012AFRDM 1109 bool "Support ls1012afrdm" 1110 select ARCH_LS1012A 1111 select ARM64 1112 help 1113 Support for Freescale LS1012AFRDM platform. 1114 The LS1012A Freedom board (FRDM) is a high-performance 1115 development platform that supports the QorIQ LS1012A 1116 Layerscape Architecture processor. 1117 1118config TARGET_LS1088ARDB 1119 bool "Support ls1088ardb" 1120 select ARCH_LS1088A 1121 select ARCH_MISC_INIT 1122 select ARM64 1123 select ARMV8_MULTIENTRY 1124 select BOARD_LATE_INIT 1125 select SUPPORT_SPL 1126 help 1127 Support for NXP LS1088ARDB platform. 1128 The LS1088A Reference design board (RDB) is a high-performance 1129 development platform that supports the QorIQ LS1088A 1130 Layerscape Architecture processor. 1131 1132config TARGET_LS1021AQDS 1133 bool "Support ls1021aqds" 1134 select ARCH_LS1021A 1135 select ARCH_SUPPORT_PSCI 1136 select BOARD_EARLY_INIT_F 1137 select BOARD_LATE_INIT 1138 select CPU_V7A 1139 select CPU_V7_HAS_NONSEC 1140 select CPU_V7_HAS_VIRT 1141 select LS1_DEEP_SLEEP 1142 select SUPPORT_SPL 1143 select SYS_FSL_DDR 1144 imply SCSI 1145 1146config TARGET_LS1021ATWR 1147 bool "Support ls1021atwr" 1148 select ARCH_LS1021A 1149 select ARCH_SUPPORT_PSCI 1150 select BOARD_EARLY_INIT_F 1151 select BOARD_LATE_INIT 1152 select CPU_V7A 1153 select CPU_V7_HAS_NONSEC 1154 select CPU_V7_HAS_VIRT 1155 select LS1_DEEP_SLEEP 1156 select SUPPORT_SPL 1157 imply SCSI 1158 1159config TARGET_LS1021AIOT 1160 bool "Support ls1021aiot" 1161 select ARCH_LS1021A 1162 select ARCH_SUPPORT_PSCI 1163 select BOARD_LATE_INIT 1164 select CPU_V7A 1165 select CPU_V7_HAS_NONSEC 1166 select CPU_V7_HAS_VIRT 1167 select SUPPORT_SPL 1168 imply SCSI 1169 help 1170 Support for Freescale LS1021AIOT platform. 1171 The LS1021A Freescale board (IOT) is a high-performance 1172 development platform that supports the QorIQ LS1021A 1173 Layerscape Architecture processor. 1174 1175config TARGET_LS1043AQDS 1176 bool "Support ls1043aqds" 1177 select ARCH_LS1043A 1178 select ARM64 1179 select ARMV8_MULTIENTRY 1180 select BOARD_EARLY_INIT_F 1181 select BOARD_LATE_INIT 1182 select SUPPORT_SPL 1183 imply SCSI 1184 help 1185 Support for Freescale LS1043AQDS platform. 1186 1187config TARGET_LS1043ARDB 1188 bool "Support ls1043ardb" 1189 select ARCH_LS1043A 1190 select ARM64 1191 select ARMV8_MULTIENTRY 1192 select BOARD_EARLY_INIT_F 1193 select BOARD_LATE_INIT 1194 select SUPPORT_SPL 1195 imply SCSI 1196 help 1197 Support for Freescale LS1043ARDB platform. 1198 1199config TARGET_LS1046AQDS 1200 bool "Support ls1046aqds" 1201 select ARCH_LS1046A 1202 select ARM64 1203 select ARMV8_MULTIENTRY 1204 select BOARD_EARLY_INIT_F 1205 select BOARD_LATE_INIT 1206 select DM_SPI_FLASH if DM_SPI 1207 select SUPPORT_SPL 1208 imply SCSI 1209 help 1210 Support for Freescale LS1046AQDS platform. 1211 The LS1046A Development System (QDS) is a high-performance 1212 development platform that supports the QorIQ LS1046A 1213 Layerscape Architecture processor. 1214 1215config TARGET_LS1046ARDB 1216 bool "Support ls1046ardb" 1217 select ARCH_LS1046A 1218 select ARM64 1219 select ARMV8_MULTIENTRY 1220 select BOARD_EARLY_INIT_F 1221 select BOARD_LATE_INIT 1222 select DM_SPI_FLASH if DM_SPI 1223 select POWER_MC34VR500 1224 select SUPPORT_SPL 1225 imply SCSI 1226 help 1227 Support for Freescale LS1046ARDB platform. 1228 The LS1046A Reference Design Board (RDB) is a high-performance 1229 development platform that supports the QorIQ LS1046A 1230 Layerscape Architecture processor. 1231 1232config TARGET_H2200 1233 bool "Support h2200" 1234 select CPU_PXA 1235 1236config TARGET_ZIPITZ2 1237 bool "Support zipitz2" 1238 select CPU_PXA 1239 1240config TARGET_COLIBRI_PXA270 1241 bool "Support colibri_pxa270" 1242 select CPU_PXA 1243 1244config ARCH_UNIPHIER 1245 bool "Socionext UniPhier SoCs" 1246 select BOARD_LATE_INIT 1247 select DM 1248 select DM_GPIO 1249 select DM_I2C 1250 select DM_MMC 1251 select DM_RESET 1252 select DM_SERIAL 1253 select DM_USB 1254 select OF_BOARD_SETUP 1255 select OF_CONTROL 1256 select OF_LIBFDT 1257 select PINCTRL 1258 select SPL_BOARD_INIT if SPL 1259 select SPL_DM if SPL 1260 select SPL_LIBCOMMON_SUPPORT if SPL 1261 select SPL_LIBGENERIC_SUPPORT if SPL 1262 select SPL_OF_CONTROL if SPL 1263 select SPL_PINCTRL if SPL 1264 select SUPPORT_SPL 1265 imply CMD_DM 1266 imply DISTRO_DEFAULTS 1267 imply FAT_WRITE 1268 help 1269 Support for UniPhier SoC family developed by Socionext Inc. 1270 (formerly, System LSI Business Division of Panasonic Corporation) 1271 1272config STM32 1273 bool "Support STMicroelectronics STM32 MCU with cortex M" 1274 select CPU_V7M 1275 select DM 1276 select DM_SERIAL 1277 imply CMD_DM 1278 1279config ARCH_STI 1280 bool "Support STMicrolectronics SoCs" 1281 select BLK 1282 select CPU_V7A 1283 select DM 1284 select DM_MMC 1285 select DM_RESET 1286 select DM_SERIAL 1287 imply CMD_DM 1288 help 1289 Support for STMicroelectronics STiH407/10 SoC family. 1290 This SoC is used on Linaro 96Board STiH410-B2260 1291 1292config ARCH_STM32MP 1293 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1294 select ARCH_MISC_INIT 1295 select BOARD_LATE_INIT 1296 select CLK 1297 select DM 1298 select DM_GPIO 1299 select DM_RESET 1300 select DM_SERIAL 1301 select MISC 1302 select OF_CONTROL 1303 select OF_LIBFDT 1304 select PINCTRL 1305 select REGMAP 1306 select SUPPORT_SPL 1307 select SYSCON 1308 select SYSRESET 1309 select SYS_THUMB_BUILD 1310 imply CMD_DM 1311 help 1312 Support for STM32MP SoC family developed by STMicroelectronics, 1313 MPUs based on ARM cortex A core 1314 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1315 BootLoader (FSBL) 1316 1317config ARCH_ROCKCHIP 1318 bool "Support Rockchip SoCs" 1319 select BLK 1320 select DM 1321 select DM_GPIO 1322 select DM_I2C 1323 select DM_MMC 1324 select DM_PWM 1325 select DM_REGULATOR 1326 select DM_SERIAL 1327 select DM_SPI 1328 select DM_SPI_FLASH 1329 select DM_USB if USB 1330 select ENABLE_ARM_SOC_BOOT0_HOOK 1331 select OF_CONTROL 1332 select SPI 1333 select SPL_DM if SPL 1334 select SPL_SYS_MALLOC_SIMPLE if SPL 1335 select SYS_MALLOC_F 1336 select SYS_THUMB_BUILD if !ARM64 1337 imply ADC 1338 imply CMD_DM 1339 imply DISTRO_DEFAULTS 1340 imply FAT_WRITE 1341 imply SARADC_ROCKCHIP 1342 imply SPL_SYSRESET 1343 imply SYS_NS16550 1344 imply TPL_SYSRESET 1345 imply USB_FUNCTION_FASTBOOT 1346 1347config TARGET_THUNDERX_88XX 1348 bool "Support ThunderX 88xx" 1349 select ARM64 1350 select OF_CONTROL 1351 select PL01X_SERIAL 1352 select SYS_CACHE_SHIFT_7 1353 1354config ARCH_ASPEED 1355 bool "Support Aspeed SoCs" 1356 select DM 1357 select OF_CONTROL 1358 imply CMD_DM 1359 1360endchoice 1361 1362config TI_SECURE_DEVICE 1363 bool "HS Device Type Support" 1364 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1365 help 1366 If a high secure (HS) device type is being used, this config 1367 must be set. This option impacts various aspects of the 1368 build system (to create signed boot images that can be 1369 authenticated) and the code. See the doc/README.ti-secure 1370 file for further details. 1371 1372source "arch/arm/mach-aspeed/Kconfig" 1373 1374source "arch/arm/mach-at91/Kconfig" 1375 1376source "arch/arm/mach-bcm283x/Kconfig" 1377 1378source "arch/arm/mach-bcmstb/Kconfig" 1379 1380source "arch/arm/mach-davinci/Kconfig" 1381 1382source "arch/arm/mach-exynos/Kconfig" 1383 1384source "arch/arm/mach-highbank/Kconfig" 1385 1386source "arch/arm/mach-integrator/Kconfig" 1387 1388source "arch/arm/mach-k3/Kconfig" 1389 1390source "arch/arm/mach-keystone/Kconfig" 1391 1392source "arch/arm/mach-kirkwood/Kconfig" 1393 1394source "arch/arm/mach-mvebu/Kconfig" 1395 1396source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1397 1398source "arch/arm/mach-imx/mx2/Kconfig" 1399 1400source "arch/arm/mach-imx/mx3/Kconfig" 1401 1402source "arch/arm/mach-imx/mx5/Kconfig" 1403 1404source "arch/arm/mach-imx/mx6/Kconfig" 1405 1406source "arch/arm/mach-imx/mx7/Kconfig" 1407 1408source "arch/arm/mach-imx/mx7ulp/Kconfig" 1409 1410source "arch/arm/mach-imx/mx8m/Kconfig" 1411 1412source "arch/arm/mach-imx/mxs/Kconfig" 1413 1414source "arch/arm/mach-omap2/Kconfig" 1415 1416source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1417 1418source "arch/arm/mach-orion5x/Kconfig" 1419 1420source "arch/arm/mach-owl/Kconfig" 1421 1422source "arch/arm/mach-rmobile/Kconfig" 1423 1424source "arch/arm/mach-meson/Kconfig" 1425 1426source "arch/arm/mach-qemu/Kconfig" 1427 1428source "arch/arm/mach-rockchip/Kconfig" 1429 1430source "arch/arm/mach-s5pc1xx/Kconfig" 1431 1432source "arch/arm/mach-snapdragon/Kconfig" 1433 1434source "arch/arm/mach-socfpga/Kconfig" 1435 1436source "arch/arm/mach-sti/Kconfig" 1437 1438source "arch/arm/mach-stm32/Kconfig" 1439 1440source "arch/arm/mach-stm32mp/Kconfig" 1441 1442source "arch/arm/mach-sunxi/Kconfig" 1443 1444source "arch/arm/mach-tegra/Kconfig" 1445 1446source "arch/arm/mach-uniphier/Kconfig" 1447 1448source "arch/arm/cpu/armv7/vf610/Kconfig" 1449 1450source "arch/arm/mach-zynq/Kconfig" 1451 1452source "arch/arm/mach-zynqmp-r5/Kconfig" 1453 1454source "arch/arm/cpu/armv7/Kconfig" 1455 1456source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1457 1458source "arch/arm/cpu/armv8/Kconfig" 1459 1460source "arch/arm/mach-imx/Kconfig" 1461 1462source "board/bosch/shc/Kconfig" 1463source "board/CarMediaLab/flea3/Kconfig" 1464source "board/Marvell/aspenite/Kconfig" 1465source "board/Marvell/gplugd/Kconfig" 1466source "board/armadeus/apf27/Kconfig" 1467source "board/armltd/vexpress/Kconfig" 1468source "board/armltd/vexpress64/Kconfig" 1469source "board/broadcom/bcm23550_w1d/Kconfig" 1470source "board/broadcom/bcm28155_ap/Kconfig" 1471source "board/broadcom/bcmcygnus/Kconfig" 1472source "board/broadcom/bcmnsp/Kconfig" 1473source "board/broadcom/bcmns2/Kconfig" 1474source "board/cavium/thunderx/Kconfig" 1475source "board/cirrus/edb93xx/Kconfig" 1476source "board/eets/pdu001/Kconfig" 1477source "board/freescale/ls2080a/Kconfig" 1478source "board/freescale/ls2080aqds/Kconfig" 1479source "board/freescale/ls2080ardb/Kconfig" 1480source "board/freescale/ls1088a/Kconfig" 1481source "board/freescale/ls1021aqds/Kconfig" 1482source "board/freescale/ls1043aqds/Kconfig" 1483source "board/freescale/ls1021atwr/Kconfig" 1484source "board/freescale/ls1021aiot/Kconfig" 1485source "board/freescale/ls1046aqds/Kconfig" 1486source "board/freescale/ls1043ardb/Kconfig" 1487source "board/freescale/ls1046ardb/Kconfig" 1488source "board/freescale/ls1012aqds/Kconfig" 1489source "board/freescale/ls1012ardb/Kconfig" 1490source "board/freescale/ls1012afrdm/Kconfig" 1491source "board/freescale/mx35pdk/Kconfig" 1492source "board/freescale/s32v234evb/Kconfig" 1493source "board/grinn/chiliboard/Kconfig" 1494source "board/gumstix/pepper/Kconfig" 1495source "board/h2200/Kconfig" 1496source "board/hisilicon/hikey/Kconfig" 1497source "board/hisilicon/poplar/Kconfig" 1498source "board/isee/igep003x/Kconfig" 1499source "board/phytec/pcm051/Kconfig" 1500source "board/silica/pengwyn/Kconfig" 1501source "board/spear/spear300/Kconfig" 1502source "board/spear/spear310/Kconfig" 1503source "board/spear/spear320/Kconfig" 1504source "board/spear/spear600/Kconfig" 1505source "board/spear/x600/Kconfig" 1506source "board/st/stv0991/Kconfig" 1507source "board/tcl/sl50/Kconfig" 1508source "board/ucRobotics/bubblegum_96/Kconfig" 1509source "board/birdland/bav335x/Kconfig" 1510source "board/timll/devkit3250/Kconfig" 1511source "board/toradex/colibri_pxa270/Kconfig" 1512source "board/vscom/baltos/Kconfig" 1513source "board/woodburn/Kconfig" 1514source "board/work-microwave/work_92105/Kconfig" 1515source "board/xilinx/Kconfig" 1516source "board/xilinx/zynq/Kconfig" 1517source "board/xilinx/zynqmp/Kconfig" 1518source "board/zipitz2/Kconfig" 1519 1520source "arch/arm/Kconfig.debug" 1521 1522endmenu 1523 1524config SPL_LDSCRIPT 1525 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1526 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1527 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1528 1529 1530