1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_VBAR 223 select HAS_THUMB2 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select THUMB2_KERNEL 231 select SYS_CACHE_SHIFT_5 232 select SYS_ARM_MPU 233 select SYS_THUMB_BUILD 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_CACHE_SHIFT_6 239 select SYS_ARM_MPU 240 select SYS_ARM_CACHE_CP15 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select CPU_ARM926EJS 431 select BOARD_EARLY_INIT_F 432 select ARCH_MISC_INIT 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select OF_CONTROL 437 select OF_SEPARATE 438 select DM 439 select DM_ETH 440 select DM_SERIAL 441 select DM_SPI 442 select DM_SPI_FLASH 443 select SPI 444 445config TARGET_DEVKIT3250 446 bool "Support devkit3250" 447 select CPU_ARM926EJS 448 select SUPPORT_SPL 449 450config TARGET_WORK_92105 451 bool "Support work_92105" 452 select CPU_ARM926EJS 453 select SUPPORT_SPL 454 455config TARGET_APF27 456 bool "Support apf27" 457 select CPU_ARM926EJS 458 select SUPPORT_SPL 459 460config ORION5X 461 bool "Marvell Orion" 462 select CPU_ARM926EJS 463 464config TARGET_SPEAR300 465 bool "Support spear300" 466 select CPU_ARM926EJS 467 select BOARD_EARLY_INIT_F 468 imply CMD_SAVES 469 select PL011_SERIAL 470 471config TARGET_SPEAR310 472 bool "Support spear310" 473 select CPU_ARM926EJS 474 select BOARD_EARLY_INIT_F 475 imply CMD_SAVES 476 select PL011_SERIAL 477 478config TARGET_SPEAR320 479 bool "Support spear320" 480 select CPU_ARM926EJS 481 select BOARD_EARLY_INIT_F 482 imply CMD_SAVES 483 select PL011_SERIAL 484 485config TARGET_SPEAR600 486 bool "Support spear600" 487 select CPU_ARM926EJS 488 select BOARD_EARLY_INIT_F 489 imply CMD_SAVES 490 select PL011_SERIAL 491 492config TARGET_STV0991 493 bool "Support stv0991" 494 select CPU_V7A 495 select DM 496 select DM_SERIAL 497 select DM_SPI 498 select DM_SPI_FLASH 499 select SPI 500 select SPI_FLASH 501 select PL01X_SERIAL 502 503config TARGET_X600 504 bool "Support x600" 505 select BOARD_LATE_INIT 506 select CPU_ARM926EJS 507 select SUPPORT_SPL 508 select PL011_SERIAL 509 510config TARGET_WOODBURN 511 bool "Support woodburn" 512 select CPU_ARM1136 513 514config TARGET_WOODBURN_SD 515 bool "Support woodburn_sd" 516 select CPU_ARM1136 517 select SUPPORT_SPL 518 519config TARGET_FLEA3 520 bool "Support flea3" 521 select CPU_ARM1136 522 523config TARGET_MX35PDK 524 bool "Support mx35pdk" 525 select BOARD_LATE_INIT 526 select CPU_ARM1136 527 528config ARCH_BCM283X 529 bool "Broadcom BCM283X family" 530 select DM 531 select DM_SERIAL 532 select DM_GPIO 533 select OF_CONTROL 534 select PL01X_SERIAL 535 select SERIAL_SEARCH_ALL 536 imply FAT_WRITE 537 538config TARGET_VEXPRESS_CA15_TC2 539 bool "Support vexpress_ca15_tc2" 540 select CPU_V7A 541 select CPU_V7_HAS_NONSEC 542 select CPU_V7_HAS_VIRT 543 select PL011_SERIAL 544 545config ARCH_BCMSTB 546 bool "Broadcom BCM7XXX family" 547 select CPU_V7A 548 select DM 549 select OF_CONTROL 550 select OF_PRIOR_STAGE 551 help 552 This enables support for Broadcom ARM-based set-top box 553 chipsets, including the 7445 family of chips. 554 555config TARGET_VEXPRESS_CA5X2 556 bool "Support vexpress_ca5x2" 557 select CPU_V7A 558 select PL011_SERIAL 559 560config TARGET_VEXPRESS_CA9X4 561 bool "Support vexpress_ca9x4" 562 select CPU_V7A 563 select PL011_SERIAL 564 565config TARGET_BCM23550_W1D 566 bool "Support bcm23550_w1d" 567 select CPU_V7A 568 imply CRC32_VERIFY 569 imply FAT_WRITE 570 571config TARGET_BCM28155_AP 572 bool "Support bcm28155_ap" 573 select CPU_V7A 574 imply CRC32_VERIFY 575 imply FAT_WRITE 576 577config TARGET_BCMCYGNUS 578 bool "Support bcmcygnus" 579 select CPU_V7A 580 imply CRC32_VERIFY 581 imply CMD_HASH 582 imply FAT_WRITE 583 imply HASH_VERIFY 584 imply NETDEVICES 585 imply BCM_SF2_ETH 586 imply BCM_SF2_ETH_GMAC 587 588config TARGET_BCMNSP 589 bool "Support bcmnsp" 590 select CPU_V7A 591 592config TARGET_BCMNS2 593 bool "Support Broadcom Northstar2" 594 select ARM64 595 help 596 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 597 ARMv8 Cortex-A57 processors targeting a broad range of networking 598 applications 599 600config ARCH_EXYNOS 601 bool "Samsung EXYNOS" 602 select DM 603 select DM_I2C 604 select DM_SPI_FLASH 605 select DM_SERIAL 606 select DM_SPI 607 select DM_GPIO 608 select DM_KEYBOARD 609 select SPI 610 imply FAT_WRITE 611 612config ARCH_S5PC1XX 613 bool "Samsung S5PC1XX" 614 select CPU_V7A 615 select DM 616 select DM_SERIAL 617 select DM_GPIO 618 select DM_I2C 619 620config ARCH_HIGHBANK 621 bool "Calxeda Highbank" 622 select CPU_V7A 623 select PL011_SERIAL 624 625config ARCH_INTEGRATOR 626 bool "ARM Ltd. Integrator family" 627 select DM 628 select DM_SERIAL 629 select PL01X_SERIAL 630 631config ARCH_KEYSTONE 632 bool "TI Keystone" 633 select CPU_V7A 634 select SUPPORT_SPL 635 select SYS_THUMB_BUILD 636 select CMD_POWEROFF 637 select SYS_ARCH_TIMER 638 imply CMD_MTDPARTS 639 imply FIT 640 imply CMD_SAVES 641 642config ARCH_OMAP2PLUS 643 bool "TI OMAP2+" 644 select CPU_V7A 645 select SPL_BOARD_INIT if SPL 646 select SPL_STACK_R if SPL 647 select SUPPORT_SPL 648 imply FIT 649 650config ARCH_MESON 651 bool "Amlogic Meson" 652 imply DISTRO_DEFAULTS 653 help 654 Support for the Meson SoC family developed by Amlogic Inc., 655 targeted at media players and tablet computers. We currently 656 support the S905 (GXBaby) 64-bit SoC. 657 658config ARCH_MX8M 659 bool "NXP i.MX8M platform" 660 select ARM64 661 select DM 662 select SUPPORT_SPL 663 664config ARCH_MX23 665 bool "NXP i.MX23 family" 666 select CPU_ARM926EJS 667 select PL011_SERIAL 668 select SUPPORT_SPL 669 670config ARCH_MX25 671 bool "NXP MX25" 672 select CPU_ARM926EJS 673 imply MXC_GPIO 674 675config ARCH_MX28 676 bool "NXP i.MX28 family" 677 select CPU_ARM926EJS 678 select PL011_SERIAL 679 select SUPPORT_SPL 680 681config ARCH_MX31 682 bool "NXP i.MX31 family" 683 select CPU_ARM1136 684 685config ARCH_MX7ULP 686 bool "NXP MX7ULP" 687 select CPU_V7A 688 select ROM_UNIFIED_SECTIONS 689 imply MXC_GPIO 690 691config ARCH_MX7 692 bool "Freescale MX7" 693 select CPU_V7A 694 select SYS_FSL_HAS_SEC if SECURE_BOOT 695 select SYS_FSL_SEC_COMPAT_4 696 select SYS_FSL_SEC_LE 697 select BOARD_EARLY_INIT_F 698 select ARCH_MISC_INIT 699 imply MXC_GPIO 700 701config ARCH_MX6 702 bool "Freescale MX6" 703 select CPU_V7A 704 select SYS_FSL_HAS_SEC if SECURE_BOOT 705 select SYS_FSL_SEC_COMPAT_4 706 select SYS_FSL_SEC_LE 707 select SYS_THUMB_BUILD if SPL 708 imply MXC_GPIO 709 710if ARCH_MX6 711config SPL_LDSCRIPT 712 default "arch/arm/mach-omap2/u-boot-spl.lds" 713endif 714 715config ARCH_MX5 716 bool "Freescale MX5" 717 select CPU_V7A 718 select BOARD_EARLY_INIT_F 719 imply MXC_GPIO 720 721config ARCH_OWL 722 bool "Actions Semi OWL SoCs" 723 select ARM64 724 select DM 725 select DM_SERIAL 726 select OF_CONTROL 727 728config ARCH_QEMU 729 bool "QEMU Virtual Platform" 730 select DM 731 select DM_SERIAL 732 select OF_CONTROL 733 select PL01X_SERIAL 734 735config ARCH_RMOBILE 736 bool "Renesas ARM SoCs" 737 select DM 738 select DM_SERIAL 739 select BOARD_EARLY_INIT_F 740 imply FAT_WRITE 741 imply SYS_THUMB_BUILD 742 743config TARGET_S32V234EVB 744 bool "Support s32v234evb" 745 select ARM64 746 select SYS_FSL_ERRATUM_ESDHC111 747 748config ARCH_SNAPDRAGON 749 bool "Qualcomm Snapdragon SoCs" 750 select ARM64 751 select DM 752 select DM_GPIO 753 select DM_SERIAL 754 select SPMI 755 select OF_CONTROL 756 select OF_SEPARATE 757 select SMEM 758 select MSM_SMEM 759 760config ARCH_SOCFPGA 761 bool "Altera SOCFPGA family" 762 select ARCH_EARLY_INIT_R 763 select ARCH_MISC_INIT 764 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 765 select DM 766 select DM_SERIAL 767 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 768 select OF_CONTROL 769 select SPL_LIBCOMMON_SUPPORT 770 select SPL_LIBDISK_SUPPORT 771 select SPL_LIBGENERIC_SUPPORT 772 select SPL_MMC_SUPPORT if DM_MMC 773 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 774 select SPL_OF_CONTROL 775 select SPL_SERIAL_SUPPORT 776 select SPL_DM_SERIAL 777 select SPL_RESET_SUPPORT 778 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 779 select SPL_SPI_SUPPORT if DM_SPI 780 select SPL_WATCHDOG_SUPPORT 781 select SUPPORT_SPL 782 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 783 select SYS_NS16550 784 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 785 select ARM64 if TARGET_SOCFPGA_STRATIX10 786 imply CMD_MTDPARTS 787 imply CRC32_VERIFY 788 imply DM_SPI 789 imply DM_SPI_FLASH 790 imply FAT_WRITE 791 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 792 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 793 794config ARCH_SUNXI 795 bool "Support sunxi (Allwinner) SoCs" 796 select BINMAN 797 select CMD_GPIO 798 select CMD_MMC if MMC 799 select CMD_USB if DISTRO_DEFAULTS 800 select DM 801 select DM_ETH 802 select DM_GPIO 803 select DM_KEYBOARD 804 select DM_SERIAL 805 select DM_USB if DISTRO_DEFAULTS 806 select OF_BOARD_SETUP 807 select OF_CONTROL 808 select OF_SEPARATE 809 select SPECIFY_CONSOLE_INDEX 810 select SPL_STACK_R if SPL 811 select SPL_SYS_MALLOC_SIMPLE if SPL 812 select SYS_NS16550 813 select SPL_SYS_THUMB_BUILD if !ARM64 814 select SYS_THUMB_BUILD if !ARM64 815 select USB if DISTRO_DEFAULTS 816 select USB_STORAGE if DISTRO_DEFAULTS 817 select USB_KEYBOARD if DISTRO_DEFAULTS 818 select USE_TINY_PRINTF 819 imply CMD_GPT 820 imply DISTRO_DEFAULTS 821 imply FAT_WRITE 822 imply OF_LIBFDT_OVERLAY 823 imply PRE_CONSOLE_BUFFER 824 imply SPL_GPIO_SUPPORT 825 imply SPL_LIBCOMMON_SUPPORT 826 imply SPL_LIBDISK_SUPPORT 827 imply SPL_LIBGENERIC_SUPPORT 828 imply SPL_MMC_SUPPORT if MMC 829 imply SPL_POWER_SUPPORT 830 imply SPL_SERIAL_SUPPORT 831 imply USB_GADGET 832 833config ARCH_VF610 834 bool "Freescale Vybrid" 835 select CPU_V7A 836 select SYS_FSL_ERRATUM_ESDHC111 837 imply CMD_MTDPARTS 838 imply NAND 839 840config ARCH_ZYNQ 841 bool "Xilinx Zynq based platform" 842 select BOARD_LATE_INIT 843 select CPU_V7A 844 select SUPPORT_SPL 845 select OF_CONTROL 846 select SPL_BOARD_INIT if SPL 847 select BOARD_EARLY_INIT_F if WDT 848 select SPL_OF_CONTROL if SPL 849 select DM 850 select DM_ETH if NET 851 select SPL_DM if SPL 852 select DM_MMC if MMC 853 select DM_SPI 854 select DM_SERIAL 855 select DM_SPI_FLASH 856 select SPL_SEPARATE_BSS if SPL 857 select DM_USB if USB 858 select CLK 859 select SPL_CLK if SPL 860 select CLK_ZYNQ 861 select SPI 862 imply CMD_CLK 863 imply FAT_WRITE 864 imply CMD_SPL 865 imply ARCH_EARLY_INIT_R 866 867config ARCH_ZYNQMP_R5 868 bool "Xilinx ZynqMP R5 based platform" 869 select CPU_V7R 870 select OF_CONTROL 871 select DM 872 select DM_SERIAL 873 select CLK 874 875config ARCH_ZYNQMP 876 bool "Xilinx ZynqMP based platform" 877 select ARM64 878 select BOARD_LATE_INIT 879 select DM 880 select OF_CONTROL 881 select DM_SERIAL 882 select SUPPORT_SPL 883 select CLK 884 select SPL_BOARD_INIT if SPL 885 select SPL_CLK if SPL 886 select DM_USB if USB 887 imply FAT_WRITE 888 889config TEGRA 890 bool "NVIDIA Tegra" 891 imply DISTRO_DEFAULTS 892 imply FAT_WRITE 893 894config TARGET_VEXPRESS64_AEMV8A 895 bool "Support vexpress_aemv8a" 896 select ARM64 897 select PL01X_SERIAL 898 899config TARGET_VEXPRESS64_BASE_FVP 900 bool "Support Versatile Express ARMv8a FVP BASE model" 901 select ARM64 902 select SEMIHOSTING 903 select PL01X_SERIAL 904 905config TARGET_VEXPRESS64_BASE_FVP_DRAM 906 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 907 select ARM64 908 select PL01X_SERIAL 909 help 910 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 911 the default config to allow the user to load the images directly into 912 DRAM using model parameters rather than by using semi-hosting to load 913 the files from the host filesystem. 914 915config TARGET_VEXPRESS64_JUNO 916 bool "Support Versatile Express Juno Development Platform" 917 select ARM64 918 select PL01X_SERIAL 919 920config TARGET_LS2080A_EMU 921 bool "Support ls2080a_emu" 922 select ARCH_LS2080A 923 select ARM64 924 select ARMV8_MULTIENTRY 925 select ARCH_MISC_INIT 926 help 927 Support for Freescale LS2080A_EMU platform 928 The LS2080A Development System (EMULATOR) is a pre silicon 929 development platform that supports the QorIQ LS2080A 930 Layerscape Architecture processor. 931 932config TARGET_LS2080A_SIMU 933 bool "Support ls2080a_simu" 934 select ARCH_LS2080A 935 select ARM64 936 select ARMV8_MULTIENTRY 937 select ARCH_MISC_INIT 938 help 939 Support for Freescale LS2080A_SIMU platform 940 The LS2080A Development System (QDS) is a pre silicon 941 development platform that supports the QorIQ LS2080A 942 Layerscape Architecture processor. 943 944config TARGET_LS1088AQDS 945 bool "Support ls1088aqds" 946 select ARCH_LS1088A 947 select ARM64 948 select ARMV8_MULTIENTRY 949 select ARCH_MISC_INIT 950 select BOARD_LATE_INIT 951 select SUPPORT_SPL 952 help 953 Support for NXP LS1088AQDS platform 954 The LS1088A Development System (QDS) is a high-performance 955 development platform that supports the QorIQ LS1088A 956 Layerscape Architecture processor. 957 958config TARGET_LS2080AQDS 959 bool "Support ls2080aqds" 960 select ARCH_LS2080A 961 select ARM64 962 select ARMV8_MULTIENTRY 963 select BOARD_LATE_INIT 964 select SUPPORT_SPL 965 select ARCH_MISC_INIT 966 imply SCSI 967 imply SCSI_AHCI 968 help 969 Support for Freescale LS2080AQDS platform 970 The LS2080A Development System (QDS) is a high-performance 971 development platform that supports the QorIQ LS2080A 972 Layerscape Architecture processor. 973 974config TARGET_LS2080ARDB 975 bool "Support ls2080ardb" 976 select ARCH_LS2080A 977 select ARM64 978 select ARMV8_MULTIENTRY 979 select BOARD_LATE_INIT 980 select SUPPORT_SPL 981 select ARCH_MISC_INIT 982 imply SCSI 983 imply SCSI_AHCI 984 help 985 Support for Freescale LS2080ARDB platform. 986 The LS2080A Reference design board (RDB) is a high-performance 987 development platform that supports the QorIQ LS2080A 988 Layerscape Architecture processor. 989 990config TARGET_LS2081ARDB 991 bool "Support ls2081ardb" 992 select ARCH_LS2080A 993 select ARM64 994 select ARMV8_MULTIENTRY 995 select BOARD_LATE_INIT 996 select SUPPORT_SPL 997 select ARCH_MISC_INIT 998 help 999 Support for Freescale LS2081ARDB platform. 1000 The LS2081A Reference design board (RDB) is a high-performance 1001 development platform that supports the QorIQ LS2081A/LS2041A 1002 Layerscape Architecture processor. 1003 1004config TARGET_HIKEY 1005 bool "Support HiKey 96boards Consumer Edition Platform" 1006 select ARM64 1007 select DM 1008 select DM_GPIO 1009 select DM_SERIAL 1010 select OF_CONTROL 1011 select PL01X_SERIAL 1012 select SPECIFY_CONSOLE_INDEX 1013 help 1014 Support for HiKey 96boards platform. It features a HI6220 1015 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1016 1017config TARGET_POPLAR 1018 bool "Support Poplar 96boards Enterprise Edition Platform" 1019 select ARM64 1020 select DM 1021 select OF_CONTROL 1022 select DM_SERIAL 1023 select DM_USB 1024 select PL01X_SERIAL 1025 help 1026 Support for Poplar 96boards EE platform. It features a HI3798cv200 1027 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1028 making it capable of running any commercial set-top solution based on 1029 Linux or Android. 1030 1031config TARGET_LS1012AQDS 1032 bool "Support ls1012aqds" 1033 select ARCH_LS1012A 1034 select ARM64 1035 select BOARD_LATE_INIT 1036 help 1037 Support for Freescale LS1012AQDS platform. 1038 The LS1012A Development System (QDS) is a high-performance 1039 development platform that supports the QorIQ LS1012A 1040 Layerscape Architecture processor. 1041 1042config TARGET_LS1012ARDB 1043 bool "Support ls1012ardb" 1044 select ARCH_LS1012A 1045 select ARM64 1046 select BOARD_LATE_INIT 1047 imply SCSI 1048 imply SCSI_AHCI 1049 help 1050 Support for Freescale LS1012ARDB platform. 1051 The LS1012A Reference design board (RDB) is a high-performance 1052 development platform that supports the QorIQ LS1012A 1053 Layerscape Architecture processor. 1054 1055config TARGET_LS1012A2G5RDB 1056 bool "Support ls1012a2g5rdb" 1057 select ARCH_LS1012A 1058 select ARM64 1059 select BOARD_LATE_INIT 1060 imply SCSI 1061 help 1062 Support for Freescale LS1012A2G5RDB platform. 1063 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1064 development platform that supports the QorIQ LS1012A 1065 Layerscape Architecture processor. 1066 1067config TARGET_LS1012AFRWY 1068 bool "Support ls1012afrwy" 1069 select ARCH_LS1012A 1070 select BOARD_LATE_INIT 1071 select ARM64 1072 imply SCSI 1073 imply SCSI_AHCI 1074 help 1075 Support for Freescale LS1012AFRWY platform. 1076 The LS1012A FRWY board (FRWY) is a high-performance 1077 development platform that supports the QorIQ LS1012A 1078 Layerscape Architecture processor. 1079 1080config TARGET_LS1012AFRDM 1081 bool "Support ls1012afrdm" 1082 select ARCH_LS1012A 1083 select ARM64 1084 help 1085 Support for Freescale LS1012AFRDM platform. 1086 The LS1012A Freedom board (FRDM) is a high-performance 1087 development platform that supports the QorIQ LS1012A 1088 Layerscape Architecture processor. 1089 1090config TARGET_LS1088ARDB 1091 bool "Support ls1088ardb" 1092 select ARCH_LS1088A 1093 select ARM64 1094 select ARMV8_MULTIENTRY 1095 select ARCH_MISC_INIT 1096 select BOARD_LATE_INIT 1097 select SUPPORT_SPL 1098 help 1099 Support for NXP LS1088ARDB platform. 1100 The LS1088A Reference design board (RDB) is a high-performance 1101 development platform that supports the QorIQ LS1088A 1102 Layerscape Architecture processor. 1103 1104config TARGET_LS1021AQDS 1105 bool "Support ls1021aqds" 1106 select BOARD_LATE_INIT 1107 select CPU_V7A 1108 select CPU_V7_HAS_NONSEC 1109 select CPU_V7_HAS_VIRT 1110 select SUPPORT_SPL 1111 select ARCH_LS1021A 1112 select ARCH_SUPPORT_PSCI 1113 select LS1_DEEP_SLEEP 1114 select SYS_FSL_DDR 1115 select BOARD_EARLY_INIT_F 1116 imply SCSI 1117 1118config TARGET_LS1021ATWR 1119 bool "Support ls1021atwr" 1120 select BOARD_LATE_INIT 1121 select CPU_V7A 1122 select CPU_V7_HAS_NONSEC 1123 select CPU_V7_HAS_VIRT 1124 select SUPPORT_SPL 1125 select ARCH_LS1021A 1126 select ARCH_SUPPORT_PSCI 1127 select LS1_DEEP_SLEEP 1128 select BOARD_EARLY_INIT_F 1129 imply SCSI 1130 1131config TARGET_LS1021AIOT 1132 bool "Support ls1021aiot" 1133 select BOARD_LATE_INIT 1134 select CPU_V7A 1135 select CPU_V7_HAS_NONSEC 1136 select CPU_V7_HAS_VIRT 1137 select SUPPORT_SPL 1138 select ARCH_LS1021A 1139 select ARCH_SUPPORT_PSCI 1140 imply SCSI 1141 help 1142 Support for Freescale LS1021AIOT platform. 1143 The LS1021A Freescale board (IOT) is a high-performance 1144 development platform that supports the QorIQ LS1021A 1145 Layerscape Architecture processor. 1146 1147config TARGET_LS1043AQDS 1148 bool "Support ls1043aqds" 1149 select ARCH_LS1043A 1150 select ARM64 1151 select ARMV8_MULTIENTRY 1152 select BOARD_LATE_INIT 1153 select SUPPORT_SPL 1154 select BOARD_EARLY_INIT_F 1155 imply SCSI 1156 help 1157 Support for Freescale LS1043AQDS platform. 1158 1159config TARGET_LS1043ARDB 1160 bool "Support ls1043ardb" 1161 select ARCH_LS1043A 1162 select ARM64 1163 select ARMV8_MULTIENTRY 1164 select BOARD_LATE_INIT 1165 select SUPPORT_SPL 1166 select BOARD_EARLY_INIT_F 1167 imply SCSI 1168 help 1169 Support for Freescale LS1043ARDB platform. 1170 1171config TARGET_LS1046AQDS 1172 bool "Support ls1046aqds" 1173 select ARCH_LS1046A 1174 select ARM64 1175 select ARMV8_MULTIENTRY 1176 select BOARD_LATE_INIT 1177 select SUPPORT_SPL 1178 select DM_SPI_FLASH if DM_SPI 1179 select BOARD_EARLY_INIT_F 1180 imply SCSI 1181 help 1182 Support for Freescale LS1046AQDS platform. 1183 The LS1046A Development System (QDS) is a high-performance 1184 development platform that supports the QorIQ LS1046A 1185 Layerscape Architecture processor. 1186 1187config TARGET_LS1046ARDB 1188 bool "Support ls1046ardb" 1189 select ARCH_LS1046A 1190 select ARM64 1191 select ARMV8_MULTIENTRY 1192 select BOARD_LATE_INIT 1193 select SUPPORT_SPL 1194 select DM_SPI_FLASH if DM_SPI 1195 select POWER_MC34VR500 1196 select BOARD_EARLY_INIT_F 1197 imply SCSI 1198 help 1199 Support for Freescale LS1046ARDB platform. 1200 The LS1046A Reference Design Board (RDB) is a high-performance 1201 development platform that supports the QorIQ LS1046A 1202 Layerscape Architecture processor. 1203 1204config TARGET_H2200 1205 bool "Support h2200" 1206 select CPU_PXA 1207 1208config TARGET_ZIPITZ2 1209 bool "Support zipitz2" 1210 select CPU_PXA 1211 1212config TARGET_COLIBRI_PXA270 1213 bool "Support colibri_pxa270" 1214 select CPU_PXA 1215 1216config ARCH_UNIPHIER 1217 bool "Socionext UniPhier SoCs" 1218 select BOARD_LATE_INIT 1219 select DM 1220 select DM_GPIO 1221 select DM_I2C 1222 select DM_MMC 1223 select DM_RESET 1224 select DM_SERIAL 1225 select DM_USB 1226 select OF_BOARD_SETUP 1227 select OF_CONTROL 1228 select OF_LIBFDT 1229 select PINCTRL 1230 select SPL_BOARD_INIT if SPL 1231 select SPL_DM if SPL 1232 select SPL_LIBCOMMON_SUPPORT if SPL 1233 select SPL_LIBGENERIC_SUPPORT if SPL 1234 select SPL_OF_CONTROL if SPL 1235 select SPL_PINCTRL if SPL 1236 select SUPPORT_SPL 1237 imply DISTRO_DEFAULTS 1238 imply FAT_WRITE 1239 help 1240 Support for UniPhier SoC family developed by Socionext Inc. 1241 (formerly, System LSI Business Division of Panasonic Corporation) 1242 1243config STM32 1244 bool "Support STMicroelectronics STM32 MCU with cortex M" 1245 select CPU_V7M 1246 select DM 1247 select DM_SERIAL 1248 select SYS_THUMB_BUILD 1249 1250config ARCH_STI 1251 bool "Support STMicrolectronics SoCs" 1252 select CPU_V7A 1253 select DM 1254 select DM_SERIAL 1255 select BLK 1256 select DM_MMC 1257 select DM_RESET 1258 help 1259 Support for STMicroelectronics STiH407/10 SoC family. 1260 This SoC is used on Linaro 96Board STiH410-B2260 1261 1262config ARCH_STM32MP 1263 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1264 select ARCH_MISC_INIT 1265 select BOARD_LATE_INIT 1266 select CLK 1267 select DM 1268 select DM_GPIO 1269 select DM_RESET 1270 select DM_SERIAL 1271 select OF_CONTROL 1272 select OF_LIBFDT 1273 select MISC 1274 select PINCTRL 1275 select REGMAP 1276 select SUPPORT_SPL 1277 select SYSCON 1278 select SYSRESET 1279 select SYS_THUMB_BUILD 1280 help 1281 Support for STM32MP SoC family developed by STMicroelectronics, 1282 MPUs based on ARM cortex A core 1283 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1284 BootLoader (FSBL) 1285 1286config ARCH_ROCKCHIP 1287 bool "Support Rockchip SoCs" 1288 select OF_CONTROL 1289 select BLK 1290 select DM 1291 select SPL_DM if SPL 1292 select SYS_MALLOC_F 1293 select SYS_THUMB_BUILD if !ARM64 1294 select SPL_SYS_MALLOC_SIMPLE if SPL 1295 select DM_GPIO 1296 select DM_I2C 1297 select DM_MMC 1298 select DM_SERIAL 1299 select DM_SPI 1300 select DM_SPI_FLASH 1301 select DM_USB if USB 1302 select DM_PWM 1303 select DM_REGULATOR 1304 select ENABLE_ARM_SOC_BOOT0_HOOK 1305 select SPI 1306 imply DISTRO_DEFAULTS 1307 imply FAT_WRITE 1308 imply USB_FUNCTION_FASTBOOT 1309 imply SPL_SYSRESET 1310 imply TPL_SYSRESET 1311 imply ADC 1312 imply SARADC_ROCKCHIP 1313 imply SYS_NS16550 1314 1315config TARGET_THUNDERX_88XX 1316 bool "Support ThunderX 88xx" 1317 select ARM64 1318 select OF_CONTROL 1319 select SYS_CACHE_SHIFT_7 1320 select PL01X_SERIAL 1321 1322config ARCH_ASPEED 1323 bool "Support Aspeed SoCs" 1324 select OF_CONTROL 1325 select DM 1326 1327endchoice 1328 1329config TI_SECURE_DEVICE 1330 bool "HS Device Type Support" 1331 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1332 help 1333 If a high secure (HS) device type is being used, this config 1334 must be set. This option impacts various aspects of the 1335 build system (to create signed boot images that can be 1336 authenticated) and the code. See the doc/README.ti-secure 1337 file for further details. 1338 1339source "arch/arm/mach-aspeed/Kconfig" 1340 1341source "arch/arm/mach-at91/Kconfig" 1342 1343source "arch/arm/mach-bcm283x/Kconfig" 1344 1345source "arch/arm/mach-bcmstb/Kconfig" 1346 1347source "arch/arm/mach-davinci/Kconfig" 1348 1349source "arch/arm/mach-exynos/Kconfig" 1350 1351source "arch/arm/mach-highbank/Kconfig" 1352 1353source "arch/arm/mach-integrator/Kconfig" 1354 1355source "arch/arm/mach-keystone/Kconfig" 1356 1357source "arch/arm/mach-kirkwood/Kconfig" 1358 1359source "arch/arm/mach-mvebu/Kconfig" 1360 1361source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1362 1363source "arch/arm/mach-imx/mx2/Kconfig" 1364 1365source "arch/arm/mach-imx/mx3/Kconfig" 1366 1367source "arch/arm/mach-imx/mx5/Kconfig" 1368 1369source "arch/arm/mach-imx/mx6/Kconfig" 1370 1371source "arch/arm/mach-imx/mx7/Kconfig" 1372 1373source "arch/arm/mach-imx/mx7ulp/Kconfig" 1374 1375source "arch/arm/mach-imx/mx8m/Kconfig" 1376 1377source "arch/arm/mach-imx/mxs/Kconfig" 1378 1379source "arch/arm/mach-omap2/Kconfig" 1380 1381source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1382 1383source "arch/arm/mach-orion5x/Kconfig" 1384 1385source "arch/arm/mach-owl/Kconfig" 1386 1387source "arch/arm/mach-rmobile/Kconfig" 1388 1389source "arch/arm/mach-meson/Kconfig" 1390 1391source "arch/arm/mach-qemu/Kconfig" 1392 1393source "arch/arm/mach-rockchip/Kconfig" 1394 1395source "arch/arm/mach-s5pc1xx/Kconfig" 1396 1397source "arch/arm/mach-snapdragon/Kconfig" 1398 1399source "arch/arm/mach-socfpga/Kconfig" 1400 1401source "arch/arm/mach-sti/Kconfig" 1402 1403source "arch/arm/mach-stm32/Kconfig" 1404 1405source "arch/arm/mach-stm32mp/Kconfig" 1406 1407source "arch/arm/mach-sunxi/Kconfig" 1408 1409source "arch/arm/mach-tegra/Kconfig" 1410 1411source "arch/arm/mach-uniphier/Kconfig" 1412 1413source "arch/arm/cpu/armv7/vf610/Kconfig" 1414 1415source "arch/arm/mach-zynq/Kconfig" 1416 1417source "arch/arm/mach-zynqmp-r5/Kconfig" 1418 1419source "arch/arm/cpu/armv7/Kconfig" 1420 1421source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1422 1423source "arch/arm/cpu/armv8/Kconfig" 1424 1425source "arch/arm/mach-imx/Kconfig" 1426 1427source "board/bosch/shc/Kconfig" 1428source "board/CarMediaLab/flea3/Kconfig" 1429source "board/Marvell/aspenite/Kconfig" 1430source "board/Marvell/gplugd/Kconfig" 1431source "board/armadeus/apf27/Kconfig" 1432source "board/armltd/vexpress/Kconfig" 1433source "board/armltd/vexpress64/Kconfig" 1434source "board/broadcom/bcm23550_w1d/Kconfig" 1435source "board/broadcom/bcm28155_ap/Kconfig" 1436source "board/broadcom/bcmcygnus/Kconfig" 1437source "board/broadcom/bcmnsp/Kconfig" 1438source "board/broadcom/bcmns2/Kconfig" 1439source "board/cavium/thunderx/Kconfig" 1440source "board/cirrus/edb93xx/Kconfig" 1441source "board/eets/pdu001/Kconfig" 1442source "board/freescale/ls2080a/Kconfig" 1443source "board/freescale/ls2080aqds/Kconfig" 1444source "board/freescale/ls2080ardb/Kconfig" 1445source "board/freescale/ls1088a/Kconfig" 1446source "board/freescale/ls1021aqds/Kconfig" 1447source "board/freescale/ls1043aqds/Kconfig" 1448source "board/freescale/ls1021atwr/Kconfig" 1449source "board/freescale/ls1021aiot/Kconfig" 1450source "board/freescale/ls1046aqds/Kconfig" 1451source "board/freescale/ls1043ardb/Kconfig" 1452source "board/freescale/ls1046ardb/Kconfig" 1453source "board/freescale/ls1012aqds/Kconfig" 1454source "board/freescale/ls1012ardb/Kconfig" 1455source "board/freescale/ls1012afrdm/Kconfig" 1456source "board/freescale/mx35pdk/Kconfig" 1457source "board/freescale/s32v234evb/Kconfig" 1458source "board/gdsys/a38x/Kconfig" 1459source "board/grinn/chiliboard/Kconfig" 1460source "board/gumstix/pepper/Kconfig" 1461source "board/h2200/Kconfig" 1462source "board/hisilicon/hikey/Kconfig" 1463source "board/hisilicon/poplar/Kconfig" 1464source "board/isee/igep003x/Kconfig" 1465source "board/phytec/pcm051/Kconfig" 1466source "board/silica/pengwyn/Kconfig" 1467source "board/spear/spear300/Kconfig" 1468source "board/spear/spear310/Kconfig" 1469source "board/spear/spear320/Kconfig" 1470source "board/spear/spear600/Kconfig" 1471source "board/spear/x600/Kconfig" 1472source "board/st/stv0991/Kconfig" 1473source "board/tcl/sl50/Kconfig" 1474source "board/ucRobotics/bubblegum_96/Kconfig" 1475source "board/birdland/bav335x/Kconfig" 1476source "board/timll/devkit3250/Kconfig" 1477source "board/toradex/colibri_pxa270/Kconfig" 1478source "board/vscom/baltos/Kconfig" 1479source "board/woodburn/Kconfig" 1480source "board/work-microwave/work_92105/Kconfig" 1481source "board/xilinx/Kconfig" 1482source "board/xilinx/zynq/Kconfig" 1483source "board/xilinx/zynqmp/Kconfig" 1484source "board/zipitz2/Kconfig" 1485 1486source "arch/arm/Kconfig.debug" 1487 1488endmenu 1489 1490config SPL_LDSCRIPT 1491 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1492 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1493 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1494 1495 1496