1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77# If set, the workarounds for these ARM errata are applied early during U-Boot 78# startup. Note that in general these options force the workarounds to be 79# applied; no CPU-type/version detection exists, unlike the similar options in 80# the Linux kernel. Do not set these options unless they apply! Also note that 81# the following can be machine specific errata. These do have ability to 82# provide rudimentary version and machine specific checks, but expect no 83# product checks: 84# CONFIG_ARM_ERRATA_430973 85# CONFIG_ARM_ERRATA_454179 86# CONFIG_ARM_ERRATA_621766 87# CONFIG_ARM_ERRATA_798870 88# CONFIG_ARM_ERRATA_801819 89config ARM_ERRATA_430973 90 bool 91 92config ARM_ERRATA_454179 93 bool 94 95config ARM_ERRATA_621766 96 bool 97 98config ARM_ERRATA_716044 99 bool 100 101config ARM_ERRATA_725233 102 bool 103 104config ARM_ERRATA_742230 105 bool 106 107config ARM_ERRATA_743622 108 bool 109 110config ARM_ERRATA_751472 111 bool 112 113config ARM_ERRATA_761320 114 bool 115 116config ARM_ERRATA_773022 117 bool 118 119config ARM_ERRATA_774769 120 bool 121 122config ARM_ERRATA_794072 123 bool 124 125config ARM_ERRATA_798870 126 bool 127 128config ARM_ERRATA_801819 129 bool 130 131config ARM_ERRATA_826974 132 bool 133 134config ARM_ERRATA_828024 135 bool 136 137config ARM_ERRATA_829520 138 bool 139 140config ARM_ERRATA_833069 141 bool 142 143config ARM_ERRATA_833471 144 bool 145 146config ARM_ERRATA_845369 147 bool 148 149config ARM_ERRATA_852421 150 bool 151 152config ARM_ERRATA_852423 153 bool 154 155config ARM_ERRATA_855873 156 bool 157 158config CPU_ARM720T 159 bool 160 select SYS_CACHE_SHIFT_5 161 162config CPU_ARM920T 163 bool 164 select SYS_CACHE_SHIFT_5 165 166config CPU_ARM926EJS 167 bool 168 select SYS_CACHE_SHIFT_5 169 170config CPU_ARM946ES 171 bool 172 select SYS_CACHE_SHIFT_5 173 174config CPU_ARM1136 175 bool 176 select SYS_CACHE_SHIFT_5 177 178config CPU_ARM1176 179 bool 180 select HAS_VBAR 181 select SYS_CACHE_SHIFT_5 182 183config CPU_V7 184 bool 185 select HAS_VBAR 186 select HAS_THUMB2 187 select SYS_CACHE_SHIFT_6 188 189config CPU_V7M 190 bool 191 select HAS_THUMB2 192 select THUMB2_KERNEL 193 select SYS_CACHE_SHIFT_5 194 195config CPU_PXA 196 bool 197 select SYS_CACHE_SHIFT_5 198 199config CPU_SA1100 200 bool 201 select SYS_CACHE_SHIFT_5 202 203config SYS_CPU 204 default "arm720t" if CPU_ARM720T 205 default "arm920t" if CPU_ARM920T 206 default "arm926ejs" if CPU_ARM926EJS 207 default "arm946es" if CPU_ARM946ES 208 default "arm1136" if CPU_ARM1136 209 default "arm1176" if CPU_ARM1176 210 default "armv7" if CPU_V7 211 default "armv7m" if CPU_V7M 212 default "pxa" if CPU_PXA 213 default "sa1100" if CPU_SA1100 214 default "armv8" if ARM64 215 216config SYS_ARM_ARCH 217 int 218 default 4 if CPU_ARM720T 219 default 4 if CPU_ARM920T 220 default 5 if CPU_ARM926EJS 221 default 5 if CPU_ARM946ES 222 default 6 if CPU_ARM1136 223 default 6 if CPU_ARM1176 224 default 7 if CPU_V7 225 default 7 if CPU_V7M 226 default 5 if CPU_PXA 227 default 4 if CPU_SA1100 228 default 8 if ARM64 229 230config SYS_CACHE_SHIFT_5 231 bool 232 233config SYS_CACHE_SHIFT_6 234 bool 235 236config SYS_CACHE_SHIFT_7 237 bool 238 239config SYS_CACHELINE_SIZE 240 int 241 default 128 if SYS_CACHE_SHIFT_7 242 default 64 if SYS_CACHE_SHIFT_6 243 default 32 if SYS_CACHE_SHIFT_5 244 245config ARM_SMCCC 246 bool "Support for ARM SMC Calling Convention (SMCCC)" 247 depends on CPU_V7 || ARM64 248 select ARM_PSCI_FW 249 help 250 Say Y here if you want to enable ARM SMC Calling Convention. 251 This should be enabled if U-Boot needs to communicate with system 252 firmware (for example, PSCI) according to SMCCC. 253 254config SEMIHOSTING 255 bool "support boot from semihosting" 256 help 257 In emulated environments, semihosting is a way for 258 the hosted environment to call out to the emulator to 259 retrieve files from the host machine. 260 261config SYS_THUMB_BUILD 262 bool "Build U-Boot using the Thumb instruction set" 263 depends on !ARM64 264 help 265 Use this flag to build U-Boot using the Thumb instruction set for 266 ARM architectures. Thumb instruction set provides better code 267 density. For ARM architectures that support Thumb2 this flag will 268 result in Thumb2 code generated by GCC. 269 270config SPL_SYS_THUMB_BUILD 271 bool "Build SPL using the Thumb instruction set" 272 default y if SYS_THUMB_BUILD 273 depends on !ARM64 274 help 275 Use this flag to build SPL using the Thumb instruction set for 276 ARM architectures. Thumb instruction set provides better code 277 density. For ARM architectures that support Thumb2 this flag will 278 result in Thumb2 code generated by GCC. 279 280config SYS_L2CACHE_OFF 281 bool "L2cache off" 282 help 283 If SoC does not support L2CACHE or one do not want to enable 284 L2CACHE, choose this option. 285 286config ENABLE_ARM_SOC_BOOT0_HOOK 287 bool "prepare BOOT0 header" 288 help 289 If the SoC's BOOT0 requires a header area filled with (magic) 290 values, then choose this option, and create a file included as 291 <asm/arch/boot0.h> which contains the required assembler code. 292 293config ARM_CORTEX_CPU_IS_UP 294 bool 295 default n 296 297config USE_ARCH_MEMCPY 298 bool "Use an assembly optimized implementation of memcpy" 299 default y 300 depends on !ARM64 301 help 302 Enable the generation of an optimized version of memcpy. 303 Such implementation may be faster under some conditions 304 but may increase the binary size. 305 306config SPL_USE_ARCH_MEMCPY 307 bool "Use an assembly optimized implementation of memcpy for SPL" 308 default y if USE_ARCH_MEMCPY 309 depends on !ARM64 310 help 311 Enable the generation of an optimized version of memcpy. 312 Such implementation may be faster under some conditions 313 but may increase the binary size. 314 315config USE_ARCH_MEMSET 316 bool "Use an assembly optimized implementation of memset" 317 default y 318 depends on !ARM64 319 help 320 Enable the generation of an optimized version of memset. 321 Such implementation may be faster under some conditions 322 but may increase the binary size. 323 324config SPL_USE_ARCH_MEMSET 325 bool "Use an assembly optimized implementation of memset for SPL" 326 default y if USE_ARCH_MEMSET 327 depends on !ARM64 328 help 329 Enable the generation of an optimized version of memset. 330 Such implementation may be faster under some conditions 331 but may increase the binary size. 332 333config ARM64_SUPPORT_AARCH32 334 bool "ARM64 system support AArch32 execution state" 335 default y if ARM64 && !TARGET_THUNDERX_88XX 336 help 337 This ARM64 system supports AArch32 execution state. 338 339choice 340 prompt "Target select" 341 default TARGET_HIKEY 342 343config ARCH_AT91 344 bool "Atmel AT91" 345 select SPL_BOARD_INIT if SPL 346 347config TARGET_EDB93XX 348 bool "Support edb93xx" 349 select CPU_ARM920T 350 select PL010_SERIAL 351 352config TARGET_ASPENITE 353 bool "Support aspenite" 354 select CPU_ARM926EJS 355 356config TARGET_GPLUGD 357 bool "Support gplugd" 358 select CPU_ARM926EJS 359 360config ARCH_DAVINCI 361 bool "TI DaVinci" 362 select CPU_ARM926EJS 363 imply CMD_SAVES 364 help 365 Support for TI's DaVinci platform. 366 367config KIRKWOOD 368 bool "Marvell Kirkwood" 369 select CPU_ARM926EJS 370 select BOARD_EARLY_INIT_F 371 select ARCH_MISC_INIT 372 373config ARCH_MVEBU 374 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 375 select OF_CONTROL 376 select OF_SEPARATE 377 select DM 378 select DM_ETH 379 select DM_SERIAL 380 select DM_SPI 381 select DM_SPI_FLASH 382 383config TARGET_DEVKIT3250 384 bool "Support devkit3250" 385 select CPU_ARM926EJS 386 select SUPPORT_SPL 387 388config TARGET_WORK_92105 389 bool "Support work_92105" 390 select CPU_ARM926EJS 391 select SUPPORT_SPL 392 393config TARGET_APF27 394 bool "Support apf27" 395 select CPU_ARM926EJS 396 select SUPPORT_SPL 397 398config ORION5X 399 bool "Marvell Orion" 400 select CPU_ARM926EJS 401 402config TARGET_SPEAR300 403 bool "Support spear300" 404 select CPU_ARM926EJS 405 select BOARD_EARLY_INIT_F 406 imply CMD_SAVES 407 select PL011_SERIAL 408 409config TARGET_SPEAR310 410 bool "Support spear310" 411 select CPU_ARM926EJS 412 select BOARD_EARLY_INIT_F 413 imply CMD_SAVES 414 select PL011_SERIAL 415 416config TARGET_SPEAR320 417 bool "Support spear320" 418 select CPU_ARM926EJS 419 select BOARD_EARLY_INIT_F 420 imply CMD_SAVES 421 select PL011_SERIAL 422 423config TARGET_SPEAR600 424 bool "Support spear600" 425 select CPU_ARM926EJS 426 select BOARD_EARLY_INIT_F 427 imply CMD_SAVES 428 select PL011_SERIAL 429 430config TARGET_STV0991 431 bool "Support stv0991" 432 select CPU_V7 433 select DM 434 select DM_SERIAL 435 select DM_SPI 436 select DM_SPI_FLASH 437 select SPI_FLASH 438 select PL01X_SERIAL 439 440config TARGET_X600 441 bool "Support x600" 442 select BOARD_LATE_INIT 443 select CPU_ARM926EJS 444 select SUPPORT_SPL 445 select PL011_SERIAL 446 447config TARGET_IMX31_PHYCORE 448 bool "Support imx31_phycore_eet" 449 select CPU_ARM1136 450 select BOARD_EARLY_INIT_F 451 452config TARGET_IMX31_PHYCORE_EET 453 bool "Support imx31_phycore_eet" 454 select BOARD_LATE_INIT 455 select CPU_ARM1136 456 select BOARD_EARLY_INIT_F 457 458config TARGET_MX31ADS 459 bool "Support mx31ads" 460 select CPU_ARM1136 461 select BOARD_EARLY_INIT_F 462 463config TARGET_MX31PDK 464 bool "Support mx31pdk" 465 select BOARD_LATE_INIT 466 select CPU_ARM1136 467 select SUPPORT_SPL 468 select BOARD_EARLY_INIT_F 469 470config TARGET_WOODBURN 471 bool "Support woodburn" 472 select CPU_ARM1136 473 474config TARGET_WOODBURN_SD 475 bool "Support woodburn_sd" 476 select CPU_ARM1136 477 select SUPPORT_SPL 478 479config TARGET_FLEA3 480 bool "Support flea3" 481 select CPU_ARM1136 482 483config TARGET_MX35PDK 484 bool "Support mx35pdk" 485 select BOARD_LATE_INIT 486 select CPU_ARM1136 487 488config ARCH_BCM283X 489 bool "Broadcom BCM283X family" 490 select DM 491 select DM_SERIAL 492 select DM_GPIO 493 select OF_CONTROL 494 select PL01X_SERIAL 495 select SERIAL_SEARCH_ALL 496 imply FAT_WRITE 497 498config TARGET_VEXPRESS_CA15_TC2 499 bool "Support vexpress_ca15_tc2" 500 select CPU_V7 501 select CPU_V7_HAS_NONSEC 502 select CPU_V7_HAS_VIRT 503 select PL011_SERIAL 504 505config TARGET_VEXPRESS_CA5X2 506 bool "Support vexpress_ca5x2" 507 select CPU_V7 508 select PL011_SERIAL 509 510config TARGET_VEXPRESS_CA9X4 511 bool "Support vexpress_ca9x4" 512 select CPU_V7 513 select PL011_SERIAL 514 515config TARGET_BCM23550_W1D 516 bool "Support bcm23550_w1d" 517 select CPU_V7 518 imply CRC32_VERIFY 519 imply FAT_WRITE 520 521config TARGET_BCM28155_AP 522 bool "Support bcm28155_ap" 523 select CPU_V7 524 imply CRC32_VERIFY 525 imply FAT_WRITE 526 527config TARGET_BCMCYGNUS 528 bool "Support bcmcygnus" 529 select CPU_V7 530 imply CRC32_VERIFY 531 imply CMD_HASH 532 imply FAT_WRITE 533 imply HASH_VERIFY 534 imply NETDEVICES 535 imply BCM_SF2_ETH 536 imply BCM_SF2_ETH_GMAC 537 538config TARGET_BCMNSP 539 bool "Support bcmnsp" 540 select CPU_V7 541 542config TARGET_BCMNS2 543 bool "Support Broadcom Northstar2" 544 select ARM64 545 help 546 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 547 ARMv8 Cortex-A57 processors targeting a broad range of networking 548 applications 549 550config ARCH_EXYNOS 551 bool "Samsung EXYNOS" 552 select DM 553 select DM_I2C 554 select DM_SPI_FLASH 555 select DM_SERIAL 556 select DM_SPI 557 select DM_GPIO 558 select DM_KEYBOARD 559 imply FAT_WRITE 560 561config ARCH_S5PC1XX 562 bool "Samsung S5PC1XX" 563 select CPU_V7 564 select DM 565 select DM_SERIAL 566 select DM_GPIO 567 select DM_I2C 568 569config ARCH_HIGHBANK 570 bool "Calxeda Highbank" 571 select CPU_V7 572 select PL011_SERIAL 573 574config ARCH_INTEGRATOR 575 bool "ARM Ltd. Integrator family" 576 select DM 577 select DM_SERIAL 578 select PL01X_SERIAL 579 580config ARCH_KEYSTONE 581 bool "TI Keystone" 582 select CPU_V7 583 select SUPPORT_SPL 584 select SYS_THUMB_BUILD 585 select CMD_POWEROFF 586 imply CMD_MTDPARTS 587 imply FIT 588 imply CMD_SAVES 589 590config ARCH_OMAP2PLUS 591 bool "TI OMAP2+" 592 select CPU_V7 593 select SPL_BOARD_INIT if SPL 594 select SPL_STACK_R if SPL 595 select SUPPORT_SPL 596 imply FIT 597 598config ARCH_MESON 599 bool "Amlogic Meson" 600 help 601 Support for the Meson SoC family developed by Amlogic Inc., 602 targeted at media players and tablet computers. We currently 603 support the S905 (GXBaby) 64-bit SoC. 604 605config ARCH_MX8M 606 bool "NXP i.MX8M platform" 607 select ARM64 608 select DM 609 select SUPPORT_SPL 610 611config ARCH_MX23 612 bool "NXP i.MX23 family" 613 select CPU_ARM926EJS 614 select PL011_SERIAL 615 select SUPPORT_SPL 616 617config ARCH_MX25 618 bool "NXP MX25" 619 select CPU_ARM926EJS 620 imply MXC_GPIO 621 622config ARCH_MX28 623 bool "NXP i.MX28 family" 624 select CPU_ARM926EJS 625 select PL011_SERIAL 626 select SUPPORT_SPL 627 628config ARCH_MX7ULP 629 bool "NXP MX7ULP" 630 select CPU_V7 631 select ROM_UNIFIED_SECTIONS 632 imply MXC_GPIO 633 634config ARCH_MX7 635 bool "Freescale MX7" 636 select CPU_V7 637 select SYS_FSL_HAS_SEC if SECURE_BOOT 638 select SYS_FSL_SEC_COMPAT_4 639 select SYS_FSL_SEC_LE 640 select BOARD_EARLY_INIT_F 641 select ARCH_MISC_INIT 642 imply MXC_GPIO 643 644config ARCH_MX6 645 bool "Freescale MX6" 646 select CPU_V7 647 select SYS_FSL_HAS_SEC if SECURE_BOOT 648 select SYS_FSL_SEC_COMPAT_4 649 select SYS_FSL_SEC_LE 650 select SYS_THUMB_BUILD if SPL 651 imply MXC_GPIO 652 653if ARCH_MX6 654config SPL_LDSCRIPT 655 default "arch/arm/mach-omap2/u-boot-spl.lds" 656endif 657 658config ARCH_MX5 659 bool "Freescale MX5" 660 select CPU_V7 661 select BOARD_EARLY_INIT_F 662 imply MXC_GPIO 663 664config ARCH_QEMU 665 bool "QEMU Virtual Platform" 666 select DM 667 select DM_SERIAL 668 select OF_CONTROL 669 select PL01X_SERIAL 670 671config ARCH_RMOBILE 672 bool "Renesas ARM SoCs" 673 select DM 674 select DM_SERIAL 675 select BOARD_EARLY_INIT_F 676 imply FAT_WRITE 677 imply SYS_THUMB_BUILD 678 679config TARGET_S32V234EVB 680 bool "Support s32v234evb" 681 select ARM64 682 select SYS_FSL_ERRATUM_ESDHC111 683 684config ARCH_SNAPDRAGON 685 bool "Qualcomm Snapdragon SoCs" 686 select ARM64 687 select DM 688 select DM_GPIO 689 select DM_SERIAL 690 select SPMI 691 select OF_CONTROL 692 select OF_SEPARATE 693 694config ARCH_SOCFPGA 695 bool "Altera SOCFPGA family" 696 select CPU_V7 697 select SUPPORT_SPL 698 select OF_CONTROL 699 select SPL_OF_CONTROL 700 select DM 701 select DM_SPI_FLASH 702 select DM_SPI 703 select ENABLE_ARM_SOC_BOOT0_HOOK 704 select ARCH_EARLY_INIT_R 705 select ARCH_MISC_INIT 706 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 707 select SYS_THUMB_BUILD 708 imply CMD_MTDPARTS 709 imply CRC32_VERIFY 710 imply FAT_WRITE 711 712config ARCH_SUNXI 713 bool "Support sunxi (Allwinner) SoCs" 714 select BINMAN 715 select CMD_GPIO 716 select CMD_MMC if MMC 717 select CMD_USB if DISTRO_DEFAULTS 718 select DM 719 select DM_ETH 720 select DM_GPIO 721 select DM_KEYBOARD 722 select DM_SERIAL 723 select DM_USB if DISTRO_DEFAULTS 724 select OF_BOARD_SETUP 725 select OF_CONTROL 726 select OF_SEPARATE 727 select SPL_STACK_R if SPL 728 select SPL_SYS_MALLOC_SIMPLE if SPL 729 select SYS_NS16550 730 select SPL_SYS_THUMB_BUILD if !ARM64 731 select SYS_THUMB_BUILD if !ARM64 732 select USB if DISTRO_DEFAULTS 733 select USB_STORAGE if DISTRO_DEFAULTS 734 select USB_KEYBOARD if DISTRO_DEFAULTS 735 select USE_TINY_PRINTF 736 imply CMD_GPT 737 imply FAT_WRITE 738 imply OF_LIBFDT_OVERLAY 739 imply PRE_CONSOLE_BUFFER 740 imply SPL_GPIO_SUPPORT 741 imply SPL_LIBCOMMON_SUPPORT 742 imply SPL_LIBDISK_SUPPORT 743 imply SPL_LIBGENERIC_SUPPORT 744 imply SPL_MMC_SUPPORT if MMC 745 imply SPL_POWER_SUPPORT 746 imply SPL_SERIAL_SUPPORT 747 imply USB_GADGET 748 749config ARCH_VF610 750 bool "Freescale Vybrid" 751 select CPU_V7 752 select SYS_FSL_ERRATUM_ESDHC111 753 imply CMD_MTDPARTS 754 imply NAND 755 756config ARCH_ZYNQ 757 bool "Xilinx Zynq based platform" 758 select BOARD_LATE_INIT 759 select CPU_V7 760 select SUPPORT_SPL 761 select OF_CONTROL 762 select SPL_BOARD_INIT if SPL 763 select SPL_OF_CONTROL if SPL 764 select DM 765 select DM_ETH if NET 766 select SPL_DM if SPL 767 select DM_MMC if MMC 768 select DM_SPI 769 select DM_SERIAL 770 select DM_SPI_FLASH 771 select SPL_SEPARATE_BSS if SPL 772 select DM_USB if USB 773 select CLK 774 select SPL_CLK if SPL 775 select CLK_ZYNQ 776 imply CMD_CLK 777 imply FAT_WRITE 778 imply CMD_SPL 779 780config ARCH_ZYNQMP 781 bool "Xilinx ZynqMP based platform" 782 select ARM64 783 select BOARD_LATE_INIT 784 select DM 785 select OF_CONTROL 786 select DM_SERIAL 787 select SUPPORT_SPL 788 select CLK 789 select SPL_BOARD_INIT if SPL 790 select SPL_CLK if SPL 791 select DM_USB if USB 792 imply FAT_WRITE 793 794config TEGRA 795 bool "NVIDIA Tegra" 796 imply FAT_WRITE 797 798config TARGET_VEXPRESS64_AEMV8A 799 bool "Support vexpress_aemv8a" 800 select ARM64 801 select PL01X_SERIAL 802 803config TARGET_VEXPRESS64_BASE_FVP 804 bool "Support Versatile Express ARMv8a FVP BASE model" 805 select ARM64 806 select SEMIHOSTING 807 select PL01X_SERIAL 808 809config TARGET_VEXPRESS64_BASE_FVP_DRAM 810 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 811 select ARM64 812 select PL01X_SERIAL 813 help 814 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 815 the default config to allow the user to load the images directly into 816 DRAM using model parameters rather than by using semi-hosting to load 817 the files from the host filesystem. 818 819config TARGET_VEXPRESS64_JUNO 820 bool "Support Versatile Express Juno Development Platform" 821 select ARM64 822 select PL01X_SERIAL 823 824config TARGET_LS2080A_EMU 825 bool "Support ls2080a_emu" 826 select ARCH_LS2080A 827 select ARM64 828 select ARMV8_MULTIENTRY 829 select ARCH_MISC_INIT 830 help 831 Support for Freescale LS2080A_EMU platform 832 The LS2080A Development System (EMULATOR) is a pre silicon 833 development platform that supports the QorIQ LS2080A 834 Layerscape Architecture processor. 835 836config TARGET_LS2080A_SIMU 837 bool "Support ls2080a_simu" 838 select ARCH_LS2080A 839 select ARM64 840 select ARMV8_MULTIENTRY 841 select ARCH_MISC_INIT 842 help 843 Support for Freescale LS2080A_SIMU platform 844 The LS2080A Development System (QDS) is a pre silicon 845 development platform that supports the QorIQ LS2080A 846 Layerscape Architecture processor. 847 848config TARGET_LS1088AQDS 849 bool "Support ls1088aqds" 850 select ARCH_LS1088A 851 select ARM64 852 select ARMV8_MULTIENTRY 853 select ARCH_MISC_INIT 854 select BOARD_LATE_INIT 855 select SUPPORT_SPL 856 help 857 Support for NXP LS1088AQDS platform 858 The LS1088A Development System (QDS) is a high-performance 859 development platform that supports the QorIQ LS1088A 860 Layerscape Architecture processor. 861 862config TARGET_LS2080AQDS 863 bool "Support ls2080aqds" 864 select ARCH_LS2080A 865 select ARM64 866 select ARMV8_MULTIENTRY 867 select BOARD_LATE_INIT 868 select SUPPORT_SPL 869 select ARCH_MISC_INIT 870 imply SCSI 871 imply SCSI_AHCI 872 help 873 Support for Freescale LS2080AQDS platform 874 The LS2080A Development System (QDS) is a high-performance 875 development platform that supports the QorIQ LS2080A 876 Layerscape Architecture processor. 877 878config TARGET_LS2080ARDB 879 bool "Support ls2080ardb" 880 select ARCH_LS2080A 881 select ARM64 882 select ARMV8_MULTIENTRY 883 select BOARD_LATE_INIT 884 select SUPPORT_SPL 885 select ARCH_MISC_INIT 886 imply SCSI 887 imply SCSI_AHCI 888 help 889 Support for Freescale LS2080ARDB platform. 890 The LS2080A Reference design board (RDB) is a high-performance 891 development platform that supports the QorIQ LS2080A 892 Layerscape Architecture processor. 893 894config TARGET_LS2081ARDB 895 bool "Support ls2081ardb" 896 select ARCH_LS2080A 897 select ARM64 898 select ARMV8_MULTIENTRY 899 select BOARD_LATE_INIT 900 select SUPPORT_SPL 901 select ARCH_MISC_INIT 902 help 903 Support for Freescale LS2081ARDB platform. 904 The LS2081A Reference design board (RDB) is a high-performance 905 development platform that supports the QorIQ LS2081A/LS2041A 906 Layerscape Architecture processor. 907 908config TARGET_HIKEY 909 bool "Support HiKey 96boards Consumer Edition Platform" 910 select ARM64 911 select DM 912 select DM_GPIO 913 select DM_SERIAL 914 select OF_CONTROL 915 select PL01X_SERIAL 916 help 917 Support for HiKey 96boards platform. It features a HI6220 918 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 919 920config TARGET_POPLAR 921 bool "Support Poplar 96boards Enterprise Edition Platform" 922 select ARM64 923 select DM 924 select OF_CONTROL 925 select DM_SERIAL 926 select DM_USB 927 select PL01X_SERIAL 928 help 929 Support for Poplar 96boards EE platform. It features a HI3798cv200 930 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 931 making it capable of running any commercial set-top solution based on 932 Linux or Android. 933 934config TARGET_LS1012AQDS 935 bool "Support ls1012aqds" 936 select ARCH_LS1012A 937 select ARM64 938 select BOARD_LATE_INIT 939 help 940 Support for Freescale LS1012AQDS platform. 941 The LS1012A Development System (QDS) is a high-performance 942 development platform that supports the QorIQ LS1012A 943 Layerscape Architecture processor. 944 945config TARGET_LS1012ARDB 946 bool "Support ls1012ardb" 947 select ARCH_LS1012A 948 select ARM64 949 select BOARD_LATE_INIT 950 imply SCSI 951 imply SCSI_AHCI 952 help 953 Support for Freescale LS1012ARDB platform. 954 The LS1012A Reference design board (RDB) is a high-performance 955 development platform that supports the QorIQ LS1012A 956 Layerscape Architecture processor. 957 958config TARGET_LS1012A2G5RDB 959 bool "Support ls1012a2g5rdb" 960 select ARCH_LS1012A 961 select ARM64 962 select BOARD_LATE_INIT 963 imply SCSI 964 help 965 Support for Freescale LS1012A2G5RDB platform. 966 The LS1012A 2G5 Reference design board (RDB) is a high-performance 967 development platform that supports the QorIQ LS1012A 968 Layerscape Architecture processor. 969 970config TARGET_LS1012AFRDM 971 bool "Support ls1012afrdm" 972 select ARCH_LS1012A 973 select ARM64 974 help 975 Support for Freescale LS1012AFRDM platform. 976 The LS1012A Freedom board (FRDM) is a high-performance 977 development platform that supports the QorIQ LS1012A 978 Layerscape Architecture processor. 979 980config TARGET_LS1088ARDB 981 bool "Support ls1088ardb" 982 select ARCH_LS1088A 983 select ARM64 984 select ARMV8_MULTIENTRY 985 select ARCH_MISC_INIT 986 select BOARD_LATE_INIT 987 select SUPPORT_SPL 988 help 989 Support for NXP LS1088ARDB platform. 990 The LS1088A Reference design board (RDB) is a high-performance 991 development platform that supports the QorIQ LS1088A 992 Layerscape Architecture processor. 993 994config TARGET_LS1021AQDS 995 bool "Support ls1021aqds" 996 select BOARD_LATE_INIT 997 select CPU_V7 998 select CPU_V7_HAS_NONSEC 999 select CPU_V7_HAS_VIRT 1000 select SUPPORT_SPL 1001 select ARCH_LS1021A 1002 select ARCH_SUPPORT_PSCI 1003 select LS1_DEEP_SLEEP 1004 select SYS_FSL_DDR 1005 select BOARD_EARLY_INIT_F 1006 imply SCSI 1007 1008config TARGET_LS1021ATWR 1009 bool "Support ls1021atwr" 1010 select BOARD_LATE_INIT 1011 select CPU_V7 1012 select CPU_V7_HAS_NONSEC 1013 select CPU_V7_HAS_VIRT 1014 select SUPPORT_SPL 1015 select ARCH_LS1021A 1016 select ARCH_SUPPORT_PSCI 1017 select LS1_DEEP_SLEEP 1018 select BOARD_EARLY_INIT_F 1019 imply SCSI 1020 1021config TARGET_LS1021AIOT 1022 bool "Support ls1021aiot" 1023 select BOARD_LATE_INIT 1024 select CPU_V7 1025 select CPU_V7_HAS_NONSEC 1026 select CPU_V7_HAS_VIRT 1027 select SUPPORT_SPL 1028 select ARCH_LS1021A 1029 select ARCH_SUPPORT_PSCI 1030 imply SCSI 1031 help 1032 Support for Freescale LS1021AIOT platform. 1033 The LS1021A Freescale board (IOT) is a high-performance 1034 development platform that supports the QorIQ LS1021A 1035 Layerscape Architecture processor. 1036 1037config TARGET_LS1043AQDS 1038 bool "Support ls1043aqds" 1039 select ARCH_LS1043A 1040 select ARM64 1041 select ARMV8_MULTIENTRY 1042 select BOARD_LATE_INIT 1043 select SUPPORT_SPL 1044 select BOARD_EARLY_INIT_F 1045 imply SCSI 1046 help 1047 Support for Freescale LS1043AQDS platform. 1048 1049config TARGET_LS1043ARDB 1050 bool "Support ls1043ardb" 1051 select ARCH_LS1043A 1052 select ARM64 1053 select ARMV8_MULTIENTRY 1054 select BOARD_LATE_INIT 1055 select SUPPORT_SPL 1056 select BOARD_EARLY_INIT_F 1057 imply SCSI 1058 help 1059 Support for Freescale LS1043ARDB platform. 1060 1061config TARGET_LS1046AQDS 1062 bool "Support ls1046aqds" 1063 select ARCH_LS1046A 1064 select ARM64 1065 select ARMV8_MULTIENTRY 1066 select BOARD_LATE_INIT 1067 select SUPPORT_SPL 1068 select DM_SPI_FLASH if DM_SPI 1069 select BOARD_EARLY_INIT_F 1070 imply SCSI 1071 help 1072 Support for Freescale LS1046AQDS platform. 1073 The LS1046A Development System (QDS) is a high-performance 1074 development platform that supports the QorIQ LS1046A 1075 Layerscape Architecture processor. 1076 1077config TARGET_LS1046ARDB 1078 bool "Support ls1046ardb" 1079 select ARCH_LS1046A 1080 select ARM64 1081 select ARMV8_MULTIENTRY 1082 select BOARD_LATE_INIT 1083 select SUPPORT_SPL 1084 select DM_SPI_FLASH if DM_SPI 1085 select POWER_MC34VR500 1086 select BOARD_EARLY_INIT_F 1087 imply SCSI 1088 help 1089 Support for Freescale LS1046ARDB platform. 1090 The LS1046A Reference Design Board (RDB) is a high-performance 1091 development platform that supports the QorIQ LS1046A 1092 Layerscape Architecture processor. 1093 1094config TARGET_H2200 1095 bool "Support h2200" 1096 select CPU_PXA 1097 1098config TARGET_ZIPITZ2 1099 bool "Support zipitz2" 1100 select CPU_PXA 1101 1102config TARGET_COLIBRI_PXA270 1103 bool "Support colibri_pxa270" 1104 select CPU_PXA 1105 1106config ARCH_UNIPHIER 1107 bool "Socionext UniPhier SoCs" 1108 select BOARD_LATE_INIT 1109 select DM 1110 select DM_GPIO 1111 select DM_I2C 1112 select DM_MMC 1113 select DM_RESET 1114 select DM_SERIAL 1115 select DM_USB 1116 select OF_CONTROL 1117 select OF_LIBFDT 1118 select PINCTRL 1119 select SPL_BOARD_INIT if SPL 1120 select SPL_DM if SPL 1121 select SPL_LIBCOMMON_SUPPORT if SPL 1122 select SPL_LIBGENERIC_SUPPORT if SPL 1123 select SPL_OF_CONTROL if SPL 1124 select SPL_PINCTRL if SPL 1125 select SUPPORT_SPL 1126 imply FAT_WRITE 1127 help 1128 Support for UniPhier SoC family developed by Socionext Inc. 1129 (formerly, System LSI Business Division of Panasonic Corporation) 1130 1131config STM32 1132 bool "Support STM32" 1133 select CPU_V7M 1134 select DM 1135 select DM_SERIAL 1136 select SYS_THUMB_BUILD 1137 1138config ARCH_STI 1139 bool "Support STMicrolectronics SoCs" 1140 select CPU_V7 1141 select DM 1142 select DM_SERIAL 1143 select BLK 1144 select DM_MMC 1145 select DM_RESET 1146 help 1147 Support for STMicroelectronics STiH407/10 SoC family. 1148 This SoC is used on Linaro 96Board STiH410-B2260 1149 1150config ARCH_ROCKCHIP 1151 bool "Support Rockchip SoCs" 1152 select OF_CONTROL 1153 select BLK 1154 select DM 1155 select SPL_DM if SPL 1156 select SYS_MALLOC_F 1157 select SYS_THUMB_BUILD if !ARM64 1158 select SPL_SYS_MALLOC_SIMPLE if SPL 1159 select DM_GPIO 1160 select DM_I2C 1161 select DM_MMC 1162 select DM_SERIAL 1163 select DM_SPI 1164 select DM_SPI_FLASH 1165 select DM_USB if USB 1166 select DM_PWM 1167 select DM_REGULATOR 1168 select ENABLE_ARM_SOC_BOOT0_HOOK 1169 imply CMD_FASTBOOT 1170 imply FASTBOOT 1171 imply FAT_WRITE 1172 imply USB_FUNCTION_FASTBOOT 1173 imply SPL_SYSRESET 1174 imply TPL_SYSRESET 1175 imply ADC 1176 imply SARADC_ROCKCHIP 1177 1178config TARGET_THUNDERX_88XX 1179 bool "Support ThunderX 88xx" 1180 select ARM64 1181 select OF_CONTROL 1182 select SYS_CACHE_SHIFT_7 1183 select PL01X_SERIAL 1184 1185config ARCH_ASPEED 1186 bool "Support Aspeed SoCs" 1187 select OF_CONTROL 1188 select DM 1189 1190endchoice 1191 1192source "arch/arm/mach-aspeed/Kconfig" 1193 1194source "arch/arm/mach-at91/Kconfig" 1195 1196source "arch/arm/mach-bcm283x/Kconfig" 1197 1198source "arch/arm/mach-davinci/Kconfig" 1199 1200source "arch/arm/mach-exynos/Kconfig" 1201 1202source "arch/arm/mach-highbank/Kconfig" 1203 1204source "arch/arm/mach-integrator/Kconfig" 1205 1206source "arch/arm/mach-keystone/Kconfig" 1207 1208source "arch/arm/mach-kirkwood/Kconfig" 1209 1210source "arch/arm/mach-mvebu/Kconfig" 1211 1212source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1213 1214source "arch/arm/mach-imx/mx2/Kconfig" 1215 1216source "arch/arm/mach-imx/mx5/Kconfig" 1217 1218source "arch/arm/mach-imx/mx6/Kconfig" 1219 1220source "arch/arm/mach-imx/mx7/Kconfig" 1221 1222source "arch/arm/mach-imx/mx7ulp/Kconfig" 1223 1224source "arch/arm/mach-imx/mx8m/Kconfig" 1225 1226source "arch/arm/mach-imx/mxs/Kconfig" 1227 1228source "arch/arm/mach-omap2/Kconfig" 1229 1230source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1231 1232source "arch/arm/mach-orion5x/Kconfig" 1233 1234source "arch/arm/mach-rmobile/Kconfig" 1235 1236source "arch/arm/mach-meson/Kconfig" 1237 1238source "arch/arm/mach-qemu/Kconfig" 1239 1240source "arch/arm/mach-rockchip/Kconfig" 1241 1242source "arch/arm/mach-s5pc1xx/Kconfig" 1243 1244source "arch/arm/mach-snapdragon/Kconfig" 1245 1246source "arch/arm/mach-socfpga/Kconfig" 1247 1248source "arch/arm/mach-sti/Kconfig" 1249 1250source "arch/arm/mach-stm32/Kconfig" 1251 1252source "arch/arm/mach-sunxi/Kconfig" 1253 1254source "arch/arm/mach-tegra/Kconfig" 1255 1256source "arch/arm/mach-uniphier/Kconfig" 1257 1258source "arch/arm/cpu/armv7/vf610/Kconfig" 1259 1260source "arch/arm/mach-zynq/Kconfig" 1261 1262source "arch/arm/cpu/armv7/Kconfig" 1263 1264source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1265 1266source "arch/arm/cpu/armv8/Kconfig" 1267 1268source "arch/arm/mach-imx/Kconfig" 1269 1270source "board/bosch/shc/Kconfig" 1271source "board/CarMediaLab/flea3/Kconfig" 1272source "board/Marvell/aspenite/Kconfig" 1273source "board/Marvell/gplugd/Kconfig" 1274source "board/armadeus/apf27/Kconfig" 1275source "board/armltd/vexpress/Kconfig" 1276source "board/armltd/vexpress64/Kconfig" 1277source "board/broadcom/bcm23550_w1d/Kconfig" 1278source "board/broadcom/bcm28155_ap/Kconfig" 1279source "board/broadcom/bcmcygnus/Kconfig" 1280source "board/broadcom/bcmnsp/Kconfig" 1281source "board/broadcom/bcmns2/Kconfig" 1282source "board/cavium/thunderx/Kconfig" 1283source "board/cirrus/edb93xx/Kconfig" 1284source "board/eets/pdu001/Kconfig" 1285source "board/freescale/ls2080a/Kconfig" 1286source "board/freescale/ls2080aqds/Kconfig" 1287source "board/freescale/ls2080ardb/Kconfig" 1288source "board/freescale/ls1088a/Kconfig" 1289source "board/freescale/ls1021aqds/Kconfig" 1290source "board/freescale/ls1043aqds/Kconfig" 1291source "board/freescale/ls1021atwr/Kconfig" 1292source "board/freescale/ls1021aiot/Kconfig" 1293source "board/freescale/ls1046aqds/Kconfig" 1294source "board/freescale/ls1043ardb/Kconfig" 1295source "board/freescale/ls1046ardb/Kconfig" 1296source "board/freescale/ls1012aqds/Kconfig" 1297source "board/freescale/ls1012ardb/Kconfig" 1298source "board/freescale/ls1012afrdm/Kconfig" 1299source "board/freescale/mx31ads/Kconfig" 1300source "board/freescale/mx31pdk/Kconfig" 1301source "board/freescale/mx35pdk/Kconfig" 1302source "board/freescale/s32v234evb/Kconfig" 1303source "board/gdsys/a38x/Kconfig" 1304source "board/grinn/chiliboard/Kconfig" 1305source "board/gumstix/pepper/Kconfig" 1306source "board/h2200/Kconfig" 1307source "board/hisilicon/hikey/Kconfig" 1308source "board/hisilicon/poplar/Kconfig" 1309source "board/imx31_phycore/Kconfig" 1310source "board/isee/igep003x/Kconfig" 1311source "board/phytec/pcm051/Kconfig" 1312source "board/silica/pengwyn/Kconfig" 1313source "board/spear/spear300/Kconfig" 1314source "board/spear/spear310/Kconfig" 1315source "board/spear/spear320/Kconfig" 1316source "board/spear/spear600/Kconfig" 1317source "board/spear/x600/Kconfig" 1318source "board/st/stv0991/Kconfig" 1319source "board/tcl/sl50/Kconfig" 1320source "board/birdland/bav335x/Kconfig" 1321source "board/timll/devkit3250/Kconfig" 1322source "board/toradex/colibri_pxa270/Kconfig" 1323source "board/vscom/baltos/Kconfig" 1324source "board/woodburn/Kconfig" 1325source "board/work-microwave/work_92105/Kconfig" 1326source "board/zipitz2/Kconfig" 1327 1328source "arch/arm/Kconfig.debug" 1329 1330endmenu 1331 1332config SPL_LDSCRIPT 1333 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if ARCH_MX23 || ARCH_MX28 1334 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1335 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1336 1337 1338