1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_852421 101 bool 102 103config ARM_ERRATA_852423 104 bool 105 106config CPU_ARM720T 107 bool 108 select SYS_CACHE_SHIFT_5 109 110config CPU_ARM920T 111 bool 112 select SYS_CACHE_SHIFT_5 113 114config CPU_ARM926EJS 115 bool 116 select SYS_CACHE_SHIFT_5 117 118config CPU_ARM946ES 119 bool 120 select SYS_CACHE_SHIFT_5 121 122config CPU_ARM1136 123 bool 124 select SYS_CACHE_SHIFT_5 125 126config CPU_ARM1176 127 bool 128 select HAS_VBAR 129 select SYS_CACHE_SHIFT_5 130 131config CPU_V7 132 bool 133 select HAS_VBAR 134 select HAS_THUMB2 135 select SYS_CACHE_SHIFT_6 136 137config CPU_V7M 138 bool 139 select HAS_THUMB2 140 select THUMB2_KERNEL 141 select SYS_CACHE_SHIFT_5 142 143config CPU_PXA 144 bool 145 select SYS_CACHE_SHIFT_5 146 147config CPU_SA1100 148 bool 149 select SYS_CACHE_SHIFT_5 150 151config SYS_CPU 152 default "arm720t" if CPU_ARM720T 153 default "arm920t" if CPU_ARM920T 154 default "arm926ejs" if CPU_ARM926EJS 155 default "arm946es" if CPU_ARM946ES 156 default "arm1136" if CPU_ARM1136 157 default "arm1176" if CPU_ARM1176 158 default "armv7" if CPU_V7 159 default "armv7m" if CPU_V7M 160 default "pxa" if CPU_PXA 161 default "sa1100" if CPU_SA1100 162 default "armv8" if ARM64 163 164config SYS_ARM_ARCH 165 int 166 default 4 if CPU_ARM720T 167 default 4 if CPU_ARM920T 168 default 5 if CPU_ARM926EJS 169 default 5 if CPU_ARM946ES 170 default 6 if CPU_ARM1136 171 default 6 if CPU_ARM1176 172 default 7 if CPU_V7 173 default 7 if CPU_V7M 174 default 5 if CPU_PXA 175 default 4 if CPU_SA1100 176 default 8 if ARM64 177 178config SYS_CACHE_SHIFT_5 179 bool 180 181config SYS_CACHE_SHIFT_6 182 bool 183 184config SYS_CACHE_SHIFT_7 185 bool 186 187config SYS_CACHELINE_SIZE 188 int 189 default 128 if SYS_CACHE_SHIFT_7 190 default 64 if SYS_CACHE_SHIFT_6 191 default 32 if SYS_CACHE_SHIFT_5 192 193config ARM_SMCCC 194 bool "Support for ARM SMC Calling Convention (SMCCC)" 195 depends on CPU_V7 || ARM64 196 select ARM_PSCI_FW 197 help 198 Say Y here if you want to enable ARM SMC Calling Convention. 199 This should be enabled if U-Boot needs to communicate with system 200 firmware (for example, PSCI) according to SMCCC. 201 202config SEMIHOSTING 203 bool "support boot from semihosting" 204 help 205 In emulated environments, semihosting is a way for 206 the hosted environment to call out to the emulator to 207 retrieve files from the host machine. 208 209config SYS_THUMB_BUILD 210 bool "Build U-Boot using the Thumb instruction set" 211 depends on !ARM64 212 help 213 Use this flag to build U-Boot using the Thumb instruction set for 214 ARM architectures. Thumb instruction set provides better code 215 density. For ARM architectures that support Thumb2 this flag will 216 result in Thumb2 code generated by GCC. 217 218config SPL_SYS_THUMB_BUILD 219 bool "Build SPL using the Thumb instruction set" 220 default y if SYS_THUMB_BUILD 221 depends on !ARM64 222 help 223 Use this flag to build SPL using the Thumb instruction set for 224 ARM architectures. Thumb instruction set provides better code 225 density. For ARM architectures that support Thumb2 this flag will 226 result in Thumb2 code generated by GCC. 227 228config SYS_L2CACHE_OFF 229 bool "L2cache off" 230 help 231 If SoC does not support L2CACHE or one do not want to enable 232 L2CACHE, choose this option. 233 234config ENABLE_ARM_SOC_BOOT0_HOOK 235 bool "prepare BOOT0 header" 236 help 237 If the SoC's BOOT0 requires a header area filled with (magic) 238 values, then choose this option, and create a define called 239 ARM_SOC_BOOT0_HOOK which contains the required assembler 240 preprocessor code. 241 242config ARM_CORTEX_CPU_IS_UP 243 bool 244 default n 245 246config USE_ARCH_MEMCPY 247 bool "Use an assembly optimized implementation of memcpy" 248 default y 249 depends on !ARM64 250 help 251 Enable the generation of an optimized version of memcpy. 252 Such implementation may be faster under some conditions 253 but may increase the binary size. 254 255config SPL_USE_ARCH_MEMCPY 256 bool "Use an assembly optimized implementation of memcpy for SPL" 257 default y if USE_ARCH_MEMCPY 258 depends on !ARM64 259 help 260 Enable the generation of an optimized version of memcpy. 261 Such implementation may be faster under some conditions 262 but may increase the binary size. 263 264config USE_ARCH_MEMSET 265 bool "Use an assembly optimized implementation of memset" 266 default y 267 depends on !ARM64 268 help 269 Enable the generation of an optimized version of memset. 270 Such implementation may be faster under some conditions 271 but may increase the binary size. 272 273config SPL_USE_ARCH_MEMSET 274 bool "Use an assembly optimized implementation of memset for SPL" 275 default y if USE_ARCH_MEMSET 276 depends on !ARM64 277 help 278 Enable the generation of an optimized version of memset. 279 Such implementation may be faster under some conditions 280 but may increase the binary size. 281 282config ARM64_SUPPORT_AARCH32 283 bool "ARM64 system support AArch32 execution state" 284 default y if ARM64 && !TARGET_THUNDERX_88XX 285 help 286 This ARM64 system supports AArch32 execution state. 287 288choice 289 prompt "Target select" 290 default TARGET_HIKEY 291 292config ARCH_AT91 293 bool "Atmel AT91" 294 select SPL_BOARD_INIT if SPL 295 296config TARGET_EDB93XX 297 bool "Support edb93xx" 298 select CPU_ARM920T 299 300config TARGET_ASPENITE 301 bool "Support aspenite" 302 select CPU_ARM926EJS 303 304config TARGET_GPLUGD 305 bool "Support gplugd" 306 select CPU_ARM926EJS 307 308config ARCH_DAVINCI 309 bool "TI DaVinci" 310 select CPU_ARM926EJS 311 imply CMD_SAVES 312 help 313 Support for TI's DaVinci platform. 314 315config KIRKWOOD 316 bool "Marvell Kirkwood" 317 select CPU_ARM926EJS 318 select BOARD_EARLY_INIT_F 319 select ARCH_MISC_INIT 320 321config ARCH_MVEBU 322 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 323 select OF_CONTROL 324 select OF_SEPARATE 325 select DM 326 select DM_ETH 327 select DM_SERIAL 328 select DM_SPI 329 select DM_SPI_FLASH 330 331config TARGET_DEVKIT3250 332 bool "Support devkit3250" 333 select CPU_ARM926EJS 334 select SUPPORT_SPL 335 336config TARGET_WORK_92105 337 bool "Support work_92105" 338 select CPU_ARM926EJS 339 select SUPPORT_SPL 340 341config TARGET_MX25PDK 342 bool "Support mx25pdk" 343 select BOARD_LATE_INIT 344 select CPU_ARM926EJS 345 select BOARD_EARLY_INIT_F 346 347config TARGET_ZMX25 348 bool "Support zmx25" 349 select BOARD_LATE_INIT 350 select CPU_ARM926EJS 351 352config TARGET_APF27 353 bool "Support apf27" 354 select CPU_ARM926EJS 355 select SUPPORT_SPL 356 357config TARGET_APX4DEVKIT 358 bool "Support apx4devkit" 359 select CPU_ARM926EJS 360 select SUPPORT_SPL 361 362config TARGET_XFI3 363 bool "Support xfi3" 364 select CPU_ARM926EJS 365 select SUPPORT_SPL 366 367config TARGET_M28EVK 368 bool "Support m28evk" 369 select CPU_ARM926EJS 370 select SUPPORT_SPL 371 372config TARGET_MX23EVK 373 bool "Support mx23evk" 374 select CPU_ARM926EJS 375 select SUPPORT_SPL 376 select BOARD_EARLY_INIT_F 377 378config TARGET_MX28EVK 379 bool "Support mx28evk" 380 select CPU_ARM926EJS 381 select SUPPORT_SPL 382 select BOARD_EARLY_INIT_F 383 384config TARGET_MX23_OLINUXINO 385 bool "Support mx23_olinuxino" 386 select CPU_ARM926EJS 387 select SUPPORT_SPL 388 select BOARD_EARLY_INIT_F 389 390config TARGET_BG0900 391 bool "Support bg0900" 392 select CPU_ARM926EJS 393 select SUPPORT_SPL 394 395config TARGET_SANSA_FUZE_PLUS 396 bool "Support sansa_fuze_plus" 397 select CPU_ARM926EJS 398 select SUPPORT_SPL 399 400config TARGET_SC_SPS_1 401 bool "Support sc_sps_1" 402 select CPU_ARM926EJS 403 select SUPPORT_SPL 404 405config ORION5X 406 bool "Marvell Orion" 407 select CPU_ARM926EJS 408 409config TARGET_SPEAR300 410 bool "Support spear300" 411 select CPU_ARM926EJS 412 select BOARD_EARLY_INIT_F 413 imply CMD_SAVES 414 415config TARGET_SPEAR310 416 bool "Support spear310" 417 select CPU_ARM926EJS 418 select BOARD_EARLY_INIT_F 419 imply CMD_SAVES 420 421config TARGET_SPEAR320 422 bool "Support spear320" 423 select CPU_ARM926EJS 424 select BOARD_EARLY_INIT_F 425 imply CMD_SAVES 426 427config TARGET_SPEAR600 428 bool "Support spear600" 429 select CPU_ARM926EJS 430 select BOARD_EARLY_INIT_F 431 imply CMD_SAVES 432 433config TARGET_STV0991 434 bool "Support stv0991" 435 select CPU_V7 436 select DM 437 select DM_SERIAL 438 select DM_SPI 439 select DM_SPI_FLASH 440 select SPI_FLASH 441 442config TARGET_X600 443 bool "Support x600" 444 select BOARD_LATE_INIT 445 select CPU_ARM926EJS 446 select SUPPORT_SPL 447 448config TARGET_IMX31_PHYCORE 449 bool "Support imx31_phycore_eet" 450 select CPU_ARM1136 451 select BOARD_EARLY_INIT_F 452 453config TARGET_IMX31_PHYCORE_EET 454 bool "Support imx31_phycore_eet" 455 select BOARD_LATE_INIT 456 select CPU_ARM1136 457 select BOARD_EARLY_INIT_F 458 459config TARGET_MX31ADS 460 bool "Support mx31ads" 461 select CPU_ARM1136 462 select BOARD_EARLY_INIT_F 463 464config TARGET_MX31PDK 465 bool "Support mx31pdk" 466 select BOARD_LATE_INIT 467 select CPU_ARM1136 468 select SUPPORT_SPL 469 select BOARD_EARLY_INIT_F 470 471config TARGET_WOODBURN 472 bool "Support woodburn" 473 select CPU_ARM1136 474 475config TARGET_WOODBURN_SD 476 bool "Support woodburn_sd" 477 select CPU_ARM1136 478 select SUPPORT_SPL 479 480config TARGET_FLEA3 481 bool "Support flea3" 482 select CPU_ARM1136 483 484config TARGET_MX35PDK 485 bool "Support mx35pdk" 486 select BOARD_LATE_INIT 487 select CPU_ARM1136 488 489config ARCH_BCM283X 490 bool "Broadcom BCM283X family" 491 select DM 492 select DM_SERIAL 493 select DM_GPIO 494 select OF_CONTROL 495 imply FAT_WRITE 496 imply ENV_IS_IN_FAT 497 498config TARGET_VEXPRESS_CA15_TC2 499 bool "Support vexpress_ca15_tc2" 500 select CPU_V7 501 select CPU_V7_HAS_NONSEC 502 select CPU_V7_HAS_VIRT 503 504config TARGET_VEXPRESS_CA5X2 505 bool "Support vexpress_ca5x2" 506 select CPU_V7 507 508config TARGET_VEXPRESS_CA9X4 509 bool "Support vexpress_ca9x4" 510 select CPU_V7 511 512config TARGET_BCM23550_W1D 513 bool "Support bcm23550_w1d" 514 select CPU_V7 515 imply CRC32_VERIFY 516 imply FAT_WRITE 517 518config TARGET_BCM28155_AP 519 bool "Support bcm28155_ap" 520 select CPU_V7 521 imply CRC32_VERIFY 522 imply FAT_WRITE 523 524config TARGET_BCMCYGNUS 525 bool "Support bcmcygnus" 526 select CPU_V7 527 imply CRC32_VERIFY 528 imply CMD_HASH 529 imply FAT_WRITE 530 imply HASH_VERIFY 531 imply NETDEVICES 532 imply BCM_SF2_ETH 533 imply BCM_SF2_ETH_GMAC 534 535config TARGET_BCMNSP 536 bool "Support bcmnsp" 537 select CPU_V7 538 539config TARGET_BCMNS2 540 bool "Support Broadcom Northstar2" 541 select ARM64 542 help 543 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 544 ARMv8 Cortex-A57 processors targeting a broad range of networking 545 applications 546 547config ARCH_EXYNOS 548 bool "Samsung EXYNOS" 549 select DM 550 select DM_I2C 551 select DM_SPI_FLASH 552 select DM_SERIAL 553 select DM_SPI 554 select DM_GPIO 555 select DM_KEYBOARD 556 imply FAT_WRITE 557 558config ARCH_S5PC1XX 559 bool "Samsung S5PC1XX" 560 select CPU_V7 561 select DM 562 select DM_SERIAL 563 select DM_GPIO 564 select DM_I2C 565 566config ARCH_HIGHBANK 567 bool "Calxeda Highbank" 568 select CPU_V7 569 570config ARCH_INTEGRATOR 571 bool "ARM Ltd. Integrator family" 572 select DM 573 select DM_SERIAL 574 575config ARCH_KEYSTONE 576 bool "TI Keystone" 577 select CPU_V7 578 select SUPPORT_SPL 579 select SYS_THUMB_BUILD 580 select CMD_POWEROFF 581 imply CMD_MTDPARTS 582 imply FIT 583 imply CMD_SAVES 584 585config ARCH_OMAP2PLUS 586 bool "TI OMAP2+" 587 select CPU_V7 588 select SPL_BOARD_INIT if SPL 589 select SUPPORT_SPL 590 imply FIT 591 592config ARCH_MESON 593 bool "Amlogic Meson" 594 help 595 Support for the Meson SoC family developed by Amlogic Inc., 596 targeted at media players and tablet computers. We currently 597 support the S905 (GXBaby) 64-bit SoC. 598 599config ARCH_MX7ULP 600 bool "NXP MX7ULP" 601 select CPU_V7 602 select ROM_UNIFIED_SECTIONS 603 604config ARCH_MX7 605 bool "Freescale MX7" 606 select CPU_V7 607 select SYS_FSL_HAS_SEC if SECURE_BOOT 608 select SYS_FSL_SEC_COMPAT_4 609 select SYS_FSL_SEC_LE 610 select BOARD_EARLY_INIT_F 611 select ARCH_MISC_INIT 612 613config ARCH_MX6 614 bool "Freescale MX6" 615 select CPU_V7 616 select SYS_FSL_HAS_SEC if SECURE_BOOT 617 select SYS_FSL_SEC_COMPAT_4 618 select SYS_FSL_SEC_LE 619 select SYS_THUMB_BUILD if SPL 620 621config ARCH_MX5 622 bool "Freescale MX5" 623 select CPU_V7 624 select BOARD_EARLY_INIT_F 625 626config ARCH_RMOBILE 627 bool "Renesas ARM SoCs" 628 select DM 629 select DM_SERIAL 630 select BOARD_EARLY_INIT_F 631 imply FAT_WRITE 632 imply SYS_THUMB_BUILD 633 634config TARGET_S32V234EVB 635 bool "Support s32v234evb" 636 select ARM64 637 select SYS_FSL_ERRATUM_ESDHC111 638 639config ARCH_SNAPDRAGON 640 bool "Qualcomm Snapdragon SoCs" 641 select ARM64 642 select DM 643 select DM_GPIO 644 select DM_SERIAL 645 select SPMI 646 select OF_CONTROL 647 select OF_SEPARATE 648 649config ARCH_SOCFPGA 650 bool "Altera SOCFPGA family" 651 select CPU_V7 652 select SUPPORT_SPL 653 select OF_CONTROL 654 select SPL_OF_CONTROL 655 select DM 656 select DM_SPI_FLASH 657 select DM_SPI 658 select ENABLE_ARM_SOC_BOOT0_HOOK 659 select ARCH_EARLY_INIT_R 660 select ARCH_MISC_INIT 661 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 662 select SYS_THUMB_BUILD 663 imply CMD_MTDPARTS 664 imply CRC32_VERIFY 665 imply FAT_WRITE 666 667config ARCH_SUNXI 668 bool "Support sunxi (Allwinner) SoCs" 669 select CMD_GPIO 670 select CMD_MMC if MMC 671 select CMD_USB if DISTRO_DEFAULTS 672 select DM 673 select DM_ETH 674 select DM_GPIO 675 select DM_KEYBOARD 676 select DM_SERIAL 677 select DM_USB if DISTRO_DEFAULTS 678 select OF_BOARD_SETUP 679 select OF_CONTROL 680 select OF_SEPARATE 681 select SPL_STACK_R if SPL 682 select SPL_SYS_MALLOC_SIMPLE if SPL 683 select SYS_NS16550 684 select SPL_SYS_THUMB_BUILD if !ARM64 685 select USB if DISTRO_DEFAULTS 686 select USB_STORAGE if DISTRO_DEFAULTS 687 select USB_KEYBOARD if DISTRO_DEFAULTS 688 select USE_TINY_PRINTF 689 imply FAT_WRITE 690 imply PRE_CONSOLE_BUFFER 691 imply SPL_GPIO_SUPPORT 692 imply SPL_LIBCOMMON_SUPPORT 693 imply SPL_LIBDISK_SUPPORT 694 imply SPL_LIBGENERIC_SUPPORT 695 imply SPL_MMC_SUPPORT if MMC 696 imply SPL_POWER_SUPPORT 697 imply SPL_SERIAL_SUPPORT 698 699config TARGET_TS4600 700 bool "Support TS4600" 701 select CPU_ARM926EJS 702 select SUPPORT_SPL 703 704config ARCH_VF610 705 bool "Freescale Vybrid" 706 select CPU_V7 707 select SYS_FSL_ERRATUM_ESDHC111 708 imply CMD_MTDPARTS 709 710config ARCH_ZYNQ 711 bool "Xilinx Zynq Platform" 712 select BOARD_LATE_INIT 713 select CPU_V7 714 select SUPPORT_SPL 715 select OF_CONTROL 716 select SPL_BOARD_INIT if SPL 717 select SPL_OF_CONTROL if SPL 718 select DM 719 select DM_ETH 720 select DM_GPIO 721 select SPL_DM if SPL 722 select DM_MMC 723 select DM_MMC_OPS 724 select DM_SPI 725 select DM_SERIAL 726 select DM_SPI_FLASH 727 select SPL_SEPARATE_BSS if SPL 728 select DM_USB if USB 729 select BLK 730 select CLK 731 select SPL_CLK 732 select CLK_ZYNQ 733 imply CMD_CLK 734 imply FAT_WRITE 735 imply CMD_SPL 736 737config ARCH_ZYNQMP 738 bool "Support Xilinx ZynqMP Platform" 739 select ARM64 740 select BOARD_LATE_INIT 741 select DM 742 select OF_CONTROL 743 select DM_SERIAL 744 select SUPPORT_SPL 745 select CLK 746 select SPL_BOARD_INIT if SPL 747 select SPL_CLK 748 select DM_USB if USB 749 imply FAT_WRITE 750 751config TEGRA 752 bool "NVIDIA Tegra" 753 imply FAT_WRITE 754 755config TARGET_VEXPRESS64_AEMV8A 756 bool "Support vexpress_aemv8a" 757 select ARM64 758 759config TARGET_VEXPRESS64_BASE_FVP 760 bool "Support Versatile Express ARMv8a FVP BASE model" 761 select ARM64 762 select SEMIHOSTING 763 764config TARGET_VEXPRESS64_BASE_FVP_DRAM 765 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 766 select ARM64 767 help 768 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 769 the default config to allow the user to load the images directly into 770 DRAM using model parameters rather than by using semi-hosting to load 771 the files from the host filesystem. 772 773config TARGET_VEXPRESS64_JUNO 774 bool "Support Versatile Express Juno Development Platform" 775 select ARM64 776 777config TARGET_LS2080A_EMU 778 bool "Support ls2080a_emu" 779 select ARCH_LS2080A 780 select ARM64 781 select ARMV8_MULTIENTRY 782 select ARCH_MISC_INIT 783 help 784 Support for Freescale LS2080A_EMU platform 785 The LS2080A Development System (EMULATOR) is a pre silicon 786 development platform that supports the QorIQ LS2080A 787 Layerscape Architecture processor. 788 789config TARGET_LS2080A_SIMU 790 bool "Support ls2080a_simu" 791 select ARCH_LS2080A 792 select ARM64 793 select ARMV8_MULTIENTRY 794 select ARCH_MISC_INIT 795 help 796 Support for Freescale LS2080A_SIMU platform 797 The LS2080A Development System (QDS) is a pre silicon 798 development platform that supports the QorIQ LS2080A 799 Layerscape Architecture processor. 800 801config TARGET_LS2080AQDS 802 bool "Support ls2080aqds" 803 select ARCH_LS2080A 804 select ARM64 805 select ARMV8_MULTIENTRY 806 select BOARD_LATE_INIT 807 select SUPPORT_SPL 808 select ARCH_MISC_INIT 809 imply SCSI 810 help 811 Support for Freescale LS2080AQDS platform 812 The LS2080A Development System (QDS) is a high-performance 813 development platform that supports the QorIQ LS2080A 814 Layerscape Architecture processor. 815 816config TARGET_LS2080ARDB 817 bool "Support ls2080ardb" 818 select ARCH_LS2080A 819 select ARM64 820 select ARMV8_MULTIENTRY 821 select BOARD_LATE_INIT 822 select SUPPORT_SPL 823 select ARCH_MISC_INIT 824 imply SCSI 825 help 826 Support for Freescale LS2080ARDB platform. 827 The LS2080A Reference design board (RDB) is a high-performance 828 development platform that supports the QorIQ LS2080A 829 Layerscape Architecture processor. 830 831config TARGET_LS2081ARDB 832 bool "Support ls2081ardb" 833 select ARCH_LS2080A 834 select ARM64 835 select ARMV8_MULTIENTRY 836 select BOARD_LATE_INIT 837 select SUPPORT_SPL 838 select ARCH_MISC_INIT 839 help 840 Support for Freescale LS2081ARDB platform. 841 The LS2081A Reference design board (RDB) is a high-performance 842 development platform that supports the QorIQ LS2081A/LS2041A 843 Layerscape Architecture processor. 844 845config TARGET_HIKEY 846 bool "Support HiKey 96boards Consumer Edition Platform" 847 select ARM64 848 select DM 849 select DM_GPIO 850 select DM_SERIAL 851 select OF_CONTROL 852 help 853 Support for HiKey 96boards platform. It features a HI6220 854 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 855 856config TARGET_POPLAR 857 bool "Support Poplar 96boards Enterprise Edition Platform" 858 select ARM64 859 select DM 860 select OF_CONTROL 861 select DM_SERIAL 862 select DM_USB 863 help 864 Support for Poplar 96boards EE platform. It features a HI3798cv200 865 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 866 making it capable of running any commercial set-top solution based on 867 Linux or Android. 868 869config TARGET_LS1012AQDS 870 bool "Support ls1012aqds" 871 select ARCH_LS1012A 872 select ARM64 873 select BOARD_LATE_INIT 874 help 875 Support for Freescale LS1012AQDS platform. 876 The LS1012A Development System (QDS) is a high-performance 877 development platform that supports the QorIQ LS1012A 878 Layerscape Architecture processor. 879 880config TARGET_LS1012ARDB 881 bool "Support ls1012ardb" 882 select ARCH_LS1012A 883 select ARM64 884 select BOARD_LATE_INIT 885 imply SCSI 886 help 887 Support for Freescale LS1012ARDB platform. 888 The LS1012A Reference design board (RDB) is a high-performance 889 development platform that supports the QorIQ LS1012A 890 Layerscape Architecture processor. 891 892config TARGET_LS1012AFRDM 893 bool "Support ls1012afrdm" 894 select ARCH_LS1012A 895 select ARM64 896 help 897 Support for Freescale LS1012AFRDM platform. 898 The LS1012A Freedom board (FRDM) is a high-performance 899 development platform that supports the QorIQ LS1012A 900 Layerscape Architecture processor. 901 902config TARGET_LS1021AQDS 903 bool "Support ls1021aqds" 904 select BOARD_LATE_INIT 905 select CPU_V7 906 select CPU_V7_HAS_NONSEC 907 select CPU_V7_HAS_VIRT 908 select SUPPORT_SPL 909 select ARCH_LS1021A 910 select ARCH_SUPPORT_PSCI 911 select LS1_DEEP_SLEEP 912 select SYS_FSL_DDR 913 select BOARD_EARLY_INIT_F 914 imply SCSI 915 916config TARGET_LS1021ATWR 917 bool "Support ls1021atwr" 918 select BOARD_LATE_INIT 919 select CPU_V7 920 select CPU_V7_HAS_NONSEC 921 select CPU_V7_HAS_VIRT 922 select SUPPORT_SPL 923 select ARCH_LS1021A 924 select ARCH_SUPPORT_PSCI 925 select LS1_DEEP_SLEEP 926 select BOARD_EARLY_INIT_F 927 imply SCSI 928 929config TARGET_LS1021AIOT 930 bool "Support ls1021aiot" 931 select BOARD_LATE_INIT 932 select CPU_V7 933 select CPU_V7_HAS_NONSEC 934 select CPU_V7_HAS_VIRT 935 select SUPPORT_SPL 936 select ARCH_LS1021A 937 select ARCH_SUPPORT_PSCI 938 imply SCSI 939 help 940 Support for Freescale LS1021AIOT platform. 941 The LS1021A Freescale board (IOT) is a high-performance 942 development platform that supports the QorIQ LS1021A 943 Layerscape Architecture processor. 944 945config TARGET_LS1043AQDS 946 bool "Support ls1043aqds" 947 select ARCH_LS1043A 948 select ARM64 949 select ARMV8_MULTIENTRY 950 select BOARD_LATE_INIT 951 select SUPPORT_SPL 952 select BOARD_EARLY_INIT_F 953 imply SCSI 954 help 955 Support for Freescale LS1043AQDS platform. 956 957config TARGET_LS1043ARDB 958 bool "Support ls1043ardb" 959 select ARCH_LS1043A 960 select ARM64 961 select ARMV8_MULTIENTRY 962 select BOARD_LATE_INIT 963 select SUPPORT_SPL 964 select BOARD_EARLY_INIT_F 965 imply SCSI 966 help 967 Support for Freescale LS1043ARDB platform. 968 969config TARGET_LS1046AQDS 970 bool "Support ls1046aqds" 971 select ARCH_LS1046A 972 select ARM64 973 select ARMV8_MULTIENTRY 974 select BOARD_LATE_INIT 975 select SUPPORT_SPL 976 select DM_SPI_FLASH if DM_SPI 977 select BOARD_EARLY_INIT_F 978 imply SCSI 979 help 980 Support for Freescale LS1046AQDS platform. 981 The LS1046A Development System (QDS) is a high-performance 982 development platform that supports the QorIQ LS1046A 983 Layerscape Architecture processor. 984 985config TARGET_LS1046ARDB 986 bool "Support ls1046ardb" 987 select ARCH_LS1046A 988 select ARM64 989 select ARMV8_MULTIENTRY 990 select BOARD_LATE_INIT 991 select SUPPORT_SPL 992 select DM_SPI_FLASH if DM_SPI 993 select POWER_MC34VR500 994 select BOARD_EARLY_INIT_F 995 imply SCSI 996 help 997 Support for Freescale LS1046ARDB platform. 998 The LS1046A Reference Design Board (RDB) is a high-performance 999 development platform that supports the QorIQ LS1046A 1000 Layerscape Architecture processor. 1001 1002config TARGET_H2200 1003 bool "Support h2200" 1004 select CPU_PXA 1005 1006config TARGET_ZIPITZ2 1007 bool "Support zipitz2" 1008 select CPU_PXA 1009 1010config TARGET_COLIBRI_PXA270 1011 bool "Support colibri_pxa270" 1012 select CPU_PXA 1013 1014config ARCH_UNIPHIER 1015 bool "Socionext UniPhier SoCs" 1016 select BOARD_LATE_INIT 1017 select CLK_UNIPHIER 1018 select DM 1019 select DM_GPIO 1020 select DM_I2C 1021 select DM_MMC 1022 select DM_RESET 1023 select DM_SERIAL 1024 select DM_USB 1025 select OF_CONTROL 1026 select OF_LIBFDT 1027 select PINCTRL 1028 select SPL_BOARD_INIT if SPL 1029 select SPL_DM if SPL 1030 select SPL_LIBCOMMON_SUPPORT if SPL 1031 select SPL_LIBGENERIC_SUPPORT if SPL 1032 select SPL_OF_CONTROL if SPL 1033 select SPL_PINCTRL if SPL 1034 select SUPPORT_SPL 1035 imply FAT_WRITE 1036 imply ENV_IS_IN_MMC 1037 help 1038 Support for UniPhier SoC family developed by Socionext Inc. 1039 (formerly, System LSI Business Division of Panasonic Corporation) 1040 1041config STM32 1042 bool "Support STM32" 1043 select CPU_V7M 1044 select DM 1045 select DM_SERIAL 1046 select SYS_THUMB_BUILD 1047 1048config ARCH_STI 1049 bool "Support STMicrolectronics SoCs" 1050 select CPU_V7 1051 select DM 1052 select DM_SERIAL 1053 select BLK 1054 select DM_MMC 1055 select DM_RESET 1056 help 1057 Support for STMicroelectronics STiH407/10 SoC family. 1058 This SoC is used on Linaro 96Board STiH410-B2260 1059 1060config ARCH_ROCKCHIP 1061 bool "Support Rockchip SoCs" 1062 select OF_CONTROL 1063 select BLK 1064 select DM 1065 select SPL_DM if SPL 1066 select SYS_MALLOC_F 1067 select SYS_THUMB_BUILD if !ARM64 1068 select SPL_SYS_MALLOC_SIMPLE if SPL 1069 select DM_GPIO 1070 select DM_I2C 1071 select DM_MMC 1072 select DM_MMC_OPS 1073 select DM_SERIAL 1074 select DM_SPI 1075 select DM_SPI_FLASH 1076 select DM_USB if USB 1077 select DM_PWM 1078 select DM_REGULATOR 1079 imply FAT_WRITE 1080 1081config TARGET_THUNDERX_88XX 1082 bool "Support ThunderX 88xx" 1083 select ARM64 1084 select OF_CONTROL 1085 select SYS_CACHE_SHIFT_7 1086 1087config ARCH_ASPEED 1088 bool "Support Aspeed SoCs" 1089 select OF_CONTROL 1090 select DM 1091 1092endchoice 1093 1094source "arch/arm/mach-aspeed/Kconfig" 1095 1096source "arch/arm/mach-at91/Kconfig" 1097 1098source "arch/arm/mach-bcm283x/Kconfig" 1099 1100source "arch/arm/mach-davinci/Kconfig" 1101 1102source "arch/arm/mach-exynos/Kconfig" 1103 1104source "arch/arm/mach-highbank/Kconfig" 1105 1106source "arch/arm/mach-integrator/Kconfig" 1107 1108source "arch/arm/mach-keystone/Kconfig" 1109 1110source "arch/arm/mach-kirkwood/Kconfig" 1111 1112source "arch/arm/mach-mvebu/Kconfig" 1113 1114source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1115 1116source "arch/arm/mach-imx/mx7ulp/Kconfig" 1117 1118source "arch/arm/mach-imx/mx7/Kconfig" 1119 1120source "arch/arm/mach-imx/mx6/Kconfig" 1121 1122source "arch/arm/mach-imx/mx5/Kconfig" 1123 1124source "arch/arm/mach-omap2/Kconfig" 1125 1126source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1127 1128source "arch/arm/mach-orion5x/Kconfig" 1129 1130source "arch/arm/mach-rmobile/Kconfig" 1131 1132source "arch/arm/mach-meson/Kconfig" 1133 1134source "arch/arm/mach-rockchip/Kconfig" 1135 1136source "arch/arm/mach-s5pc1xx/Kconfig" 1137 1138source "arch/arm/mach-snapdragon/Kconfig" 1139 1140source "arch/arm/mach-socfpga/Kconfig" 1141 1142source "arch/arm/mach-sti/Kconfig" 1143 1144source "arch/arm/mach-stm32/Kconfig" 1145 1146source "arch/arm/mach-sunxi/Kconfig" 1147 1148source "arch/arm/mach-tegra/Kconfig" 1149 1150source "arch/arm/mach-uniphier/Kconfig" 1151 1152source "arch/arm/cpu/armv7/vf610/Kconfig" 1153 1154source "arch/arm/mach-zynq/Kconfig" 1155 1156source "arch/arm/cpu/armv7/Kconfig" 1157 1158source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1159 1160source "arch/arm/cpu/armv8/Kconfig" 1161 1162source "arch/arm/mach-imx/Kconfig" 1163 1164source "board/aries/m28evk/Kconfig" 1165source "board/bosch/shc/Kconfig" 1166source "board/CarMediaLab/flea3/Kconfig" 1167source "board/Marvell/aspenite/Kconfig" 1168source "board/Marvell/gplugd/Kconfig" 1169source "board/armadeus/apf27/Kconfig" 1170source "board/armltd/vexpress/Kconfig" 1171source "board/armltd/vexpress64/Kconfig" 1172source "board/bluegiga/apx4devkit/Kconfig" 1173source "board/broadcom/bcm23550_w1d/Kconfig" 1174source "board/broadcom/bcm28155_ap/Kconfig" 1175source "board/broadcom/bcmcygnus/Kconfig" 1176source "board/broadcom/bcmnsp/Kconfig" 1177source "board/broadcom/bcmns2/Kconfig" 1178source "board/cavium/thunderx/Kconfig" 1179source "board/cirrus/edb93xx/Kconfig" 1180source "board/creative/xfi3/Kconfig" 1181source "board/freescale/ls2080a/Kconfig" 1182source "board/freescale/ls2080aqds/Kconfig" 1183source "board/freescale/ls2080ardb/Kconfig" 1184source "board/freescale/ls1021aqds/Kconfig" 1185source "board/freescale/ls1043aqds/Kconfig" 1186source "board/freescale/ls1021atwr/Kconfig" 1187source "board/freescale/ls1021aiot/Kconfig" 1188source "board/freescale/ls1046aqds/Kconfig" 1189source "board/freescale/ls1043ardb/Kconfig" 1190source "board/freescale/ls1046ardb/Kconfig" 1191source "board/freescale/ls1012aqds/Kconfig" 1192source "board/freescale/ls1012ardb/Kconfig" 1193source "board/freescale/ls1012afrdm/Kconfig" 1194source "board/freescale/mx23evk/Kconfig" 1195source "board/freescale/mx25pdk/Kconfig" 1196source "board/freescale/mx28evk/Kconfig" 1197source "board/freescale/mx31ads/Kconfig" 1198source "board/freescale/mx31pdk/Kconfig" 1199source "board/freescale/mx35pdk/Kconfig" 1200source "board/freescale/s32v234evb/Kconfig" 1201source "board/gdsys/a38x/Kconfig" 1202source "board/grinn/chiliboard/Kconfig" 1203source "board/gumstix/pepper/Kconfig" 1204source "board/h2200/Kconfig" 1205source "board/hisilicon/hikey/Kconfig" 1206source "board/hisilicon/poplar/Kconfig" 1207source "board/imx31_phycore/Kconfig" 1208source "board/isee/igep003x/Kconfig" 1209source "board/olimex/mx23_olinuxino/Kconfig" 1210source "board/phytec/pcm051/Kconfig" 1211source "board/ppcag/bg0900/Kconfig" 1212source "board/sandisk/sansa_fuze_plus/Kconfig" 1213source "board/schulercontrol/sc_sps_1/Kconfig" 1214source "board/silica/pengwyn/Kconfig" 1215source "board/spear/spear300/Kconfig" 1216source "board/spear/spear310/Kconfig" 1217source "board/spear/spear320/Kconfig" 1218source "board/spear/spear600/Kconfig" 1219source "board/spear/x600/Kconfig" 1220source "board/st/stv0991/Kconfig" 1221source "board/syteco/zmx25/Kconfig" 1222source "board/tcl/sl50/Kconfig" 1223source "board/birdland/bav335x/Kconfig" 1224source "board/timll/devkit3250/Kconfig" 1225source "board/toradex/colibri_pxa270/Kconfig" 1226source "board/technologic/ts4600/Kconfig" 1227source "board/vscom/baltos/Kconfig" 1228source "board/woodburn/Kconfig" 1229source "board/work-microwave/work_92105/Kconfig" 1230source "board/zipitz2/Kconfig" 1231 1232source "arch/arm/Kconfig.debug" 1233 1234endmenu 1235