1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_852421 101 bool 102 103config ARM_ERRATA_852423 104 bool 105 106config CPU_ARM720T 107 bool 108 select SYS_CACHE_SHIFT_5 109 110config CPU_ARM920T 111 bool 112 select SYS_CACHE_SHIFT_5 113 114config CPU_ARM926EJS 115 bool 116 select SYS_CACHE_SHIFT_5 117 118config CPU_ARM946ES 119 bool 120 select SYS_CACHE_SHIFT_5 121 122config CPU_ARM1136 123 bool 124 select SYS_CACHE_SHIFT_5 125 126config CPU_ARM1176 127 bool 128 select HAS_VBAR 129 select SYS_CACHE_SHIFT_5 130 131config CPU_V7 132 bool 133 select HAS_VBAR 134 select HAS_THUMB2 135 select SYS_CACHE_SHIFT_6 136 137config CPU_V7M 138 bool 139 select HAS_THUMB2 140 select THUMB2_KERNEL 141 select SYS_CACHE_SHIFT_5 142 143config CPU_PXA 144 bool 145 select SYS_CACHE_SHIFT_5 146 147config CPU_SA1100 148 bool 149 select SYS_CACHE_SHIFT_5 150 151config SYS_CPU 152 default "arm720t" if CPU_ARM720T 153 default "arm920t" if CPU_ARM920T 154 default "arm926ejs" if CPU_ARM926EJS 155 default "arm946es" if CPU_ARM946ES 156 default "arm1136" if CPU_ARM1136 157 default "arm1176" if CPU_ARM1176 158 default "armv7" if CPU_V7 159 default "armv7m" if CPU_V7M 160 default "pxa" if CPU_PXA 161 default "sa1100" if CPU_SA1100 162 default "armv8" if ARM64 163 164config SYS_ARM_ARCH 165 int 166 default 4 if CPU_ARM720T 167 default 4 if CPU_ARM920T 168 default 5 if CPU_ARM926EJS 169 default 5 if CPU_ARM946ES 170 default 6 if CPU_ARM1136 171 default 6 if CPU_ARM1176 172 default 7 if CPU_V7 173 default 7 if CPU_V7M 174 default 5 if CPU_PXA 175 default 4 if CPU_SA1100 176 default 8 if ARM64 177 178config SYS_CACHE_SHIFT_5 179 bool 180 181config SYS_CACHE_SHIFT_6 182 bool 183 184config SYS_CACHE_SHIFT_7 185 bool 186 187config SYS_CACHELINE_SIZE 188 int 189 default 128 if SYS_CACHE_SHIFT_7 190 default 64 if SYS_CACHE_SHIFT_6 191 default 32 if SYS_CACHE_SHIFT_5 192 193config ARM_SMCCC 194 bool "Support for ARM SMC Calling Convention (SMCCC)" 195 depends on CPU_V7 || ARM64 196 select ARM_PSCI_FW 197 help 198 Say Y here if you want to enable ARM SMC Calling Convention. 199 This should be enabled if U-Boot needs to communicate with system 200 firmware (for example, PSCI) according to SMCCC. 201 202config SEMIHOSTING 203 bool "support boot from semihosting" 204 help 205 In emulated environments, semihosting is a way for 206 the hosted environment to call out to the emulator to 207 retrieve files from the host machine. 208 209config SYS_THUMB_BUILD 210 bool "Build U-Boot using the Thumb instruction set" 211 depends on !ARM64 212 help 213 Use this flag to build U-Boot using the Thumb instruction set for 214 ARM architectures. Thumb instruction set provides better code 215 density. For ARM architectures that support Thumb2 this flag will 216 result in Thumb2 code generated by GCC. 217 218config SPL_SYS_THUMB_BUILD 219 bool "Build SPL using the Thumb instruction set" 220 default y if SYS_THUMB_BUILD 221 depends on !ARM64 222 help 223 Use this flag to build SPL using the Thumb instruction set for 224 ARM architectures. Thumb instruction set provides better code 225 density. For ARM architectures that support Thumb2 this flag will 226 result in Thumb2 code generated by GCC. 227 228config SYS_L2CACHE_OFF 229 bool "L2cache off" 230 help 231 If SoC does not support L2CACHE or one do not want to enable 232 L2CACHE, choose this option. 233 234config ENABLE_ARM_SOC_BOOT0_HOOK 235 bool "prepare BOOT0 header" 236 help 237 If the SoC's BOOT0 requires a header area filled with (magic) 238 values, then choose this option, and create a define called 239 ARM_SOC_BOOT0_HOOK which contains the required assembler 240 preprocessor code. 241 242config ARM_CORTEX_CPU_IS_UP 243 bool 244 default n 245 246config USE_ARCH_MEMCPY 247 bool "Use an assembly optimized implementation of memcpy" 248 default y 249 depends on !ARM64 250 help 251 Enable the generation of an optimized version of memcpy. 252 Such implementation may be faster under some conditions 253 but may increase the binary size. 254 255config SPL_USE_ARCH_MEMCPY 256 bool "Use an assembly optimized implementation of memcpy for SPL" 257 default y if USE_ARCH_MEMCPY 258 depends on !ARM64 259 help 260 Enable the generation of an optimized version of memcpy. 261 Such implementation may be faster under some conditions 262 but may increase the binary size. 263 264config USE_ARCH_MEMSET 265 bool "Use an assembly optimized implementation of memset" 266 default y 267 depends on !ARM64 268 help 269 Enable the generation of an optimized version of memset. 270 Such implementation may be faster under some conditions 271 but may increase the binary size. 272 273config SPL_USE_ARCH_MEMSET 274 bool "Use an assembly optimized implementation of memset for SPL" 275 default y if USE_ARCH_MEMSET 276 depends on !ARM64 277 help 278 Enable the generation of an optimized version of memset. 279 Such implementation may be faster under some conditions 280 but may increase the binary size. 281 282config ARM64_SUPPORT_AARCH32 283 bool "ARM64 system support AArch32 execution state" 284 default y if ARM64 && !TARGET_THUNDERX_88XX 285 help 286 This ARM64 system supports AArch32 execution state. 287 288choice 289 prompt "Target select" 290 default TARGET_HIKEY 291 292config ARCH_AT91 293 bool "Atmel AT91" 294 select SPL_BOARD_INIT if SPL 295 296config TARGET_EDB93XX 297 bool "Support edb93xx" 298 select CPU_ARM920T 299 300config TARGET_ASPENITE 301 bool "Support aspenite" 302 select CPU_ARM926EJS 303 304config TARGET_GPLUGD 305 bool "Support gplugd" 306 select CPU_ARM926EJS 307 308config ARCH_DAVINCI 309 bool "TI DaVinci" 310 select CPU_ARM926EJS 311 help 312 Support for TI's DaVinci platform. 313 314config KIRKWOOD 315 bool "Marvell Kirkwood" 316 select CPU_ARM926EJS 317 select BOARD_EARLY_INIT_F 318 select ARCH_MISC_INIT 319 320config ARCH_MVEBU 321 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 322 select OF_CONTROL 323 select OF_SEPARATE 324 select DM 325 select DM_ETH 326 select DM_SERIAL 327 select DM_SPI 328 select DM_SPI_FLASH 329 330config TARGET_DEVKIT3250 331 bool "Support devkit3250" 332 select CPU_ARM926EJS 333 select SUPPORT_SPL 334 335config TARGET_WORK_92105 336 bool "Support work_92105" 337 select CPU_ARM926EJS 338 select SUPPORT_SPL 339 340config TARGET_MX25PDK 341 bool "Support mx25pdk" 342 select BOARD_LATE_INIT 343 select CPU_ARM926EJS 344 select BOARD_EARLY_INIT_F 345 346config TARGET_ZMX25 347 bool "Support zmx25" 348 select BOARD_LATE_INIT 349 select CPU_ARM926EJS 350 351config TARGET_APF27 352 bool "Support apf27" 353 select CPU_ARM926EJS 354 select SUPPORT_SPL 355 356config TARGET_APX4DEVKIT 357 bool "Support apx4devkit" 358 select CPU_ARM926EJS 359 select SUPPORT_SPL 360 361config TARGET_XFI3 362 bool "Support xfi3" 363 select CPU_ARM926EJS 364 select SUPPORT_SPL 365 366config TARGET_M28EVK 367 bool "Support m28evk" 368 select CPU_ARM926EJS 369 select SUPPORT_SPL 370 371config TARGET_MX23EVK 372 bool "Support mx23evk" 373 select CPU_ARM926EJS 374 select SUPPORT_SPL 375 select BOARD_EARLY_INIT_F 376 377config TARGET_MX28EVK 378 bool "Support mx28evk" 379 select CPU_ARM926EJS 380 select SUPPORT_SPL 381 select BOARD_EARLY_INIT_F 382 383config TARGET_MX23_OLINUXINO 384 bool "Support mx23_olinuxino" 385 select CPU_ARM926EJS 386 select SUPPORT_SPL 387 select BOARD_EARLY_INIT_F 388 389config TARGET_BG0900 390 bool "Support bg0900" 391 select CPU_ARM926EJS 392 select SUPPORT_SPL 393 394config TARGET_SANSA_FUZE_PLUS 395 bool "Support sansa_fuze_plus" 396 select CPU_ARM926EJS 397 select SUPPORT_SPL 398 399config TARGET_SC_SPS_1 400 bool "Support sc_sps_1" 401 select CPU_ARM926EJS 402 select SUPPORT_SPL 403 404config ORION5X 405 bool "Marvell Orion" 406 select CPU_ARM926EJS 407 408config TARGET_SPEAR300 409 bool "Support spear300" 410 select CPU_ARM926EJS 411 select BOARD_EARLY_INIT_F 412 413config TARGET_SPEAR310 414 bool "Support spear310" 415 select CPU_ARM926EJS 416 select BOARD_EARLY_INIT_F 417 418config TARGET_SPEAR320 419 bool "Support spear320" 420 select CPU_ARM926EJS 421 select BOARD_EARLY_INIT_F 422 423config TARGET_SPEAR600 424 bool "Support spear600" 425 select CPU_ARM926EJS 426 select BOARD_EARLY_INIT_F 427 428config TARGET_STV0991 429 bool "Support stv0991" 430 select CPU_V7 431 select DM 432 select DM_SERIAL 433 select DM_SPI 434 select DM_SPI_FLASH 435 select SPI_FLASH 436 437config TARGET_X600 438 bool "Support x600" 439 select BOARD_LATE_INIT 440 select CPU_ARM926EJS 441 select SUPPORT_SPL 442 443config TARGET_IMX31_PHYCORE 444 bool "Support imx31_phycore_eet" 445 select CPU_ARM1136 446 select BOARD_EARLY_INIT_F 447 448config TARGET_IMX31_PHYCORE_EET 449 bool "Support imx31_phycore_eet" 450 select BOARD_LATE_INIT 451 select CPU_ARM1136 452 select BOARD_EARLY_INIT_F 453 454config TARGET_MX31ADS 455 bool "Support mx31ads" 456 select CPU_ARM1136 457 select BOARD_EARLY_INIT_F 458 459config TARGET_MX31PDK 460 bool "Support mx31pdk" 461 select BOARD_LATE_INIT 462 select CPU_ARM1136 463 select SUPPORT_SPL 464 select BOARD_EARLY_INIT_F 465 466config TARGET_WOODBURN 467 bool "Support woodburn" 468 select CPU_ARM1136 469 470config TARGET_WOODBURN_SD 471 bool "Support woodburn_sd" 472 select CPU_ARM1136 473 select SUPPORT_SPL 474 475config TARGET_FLEA3 476 bool "Support flea3" 477 select CPU_ARM1136 478 479config TARGET_MX35PDK 480 bool "Support mx35pdk" 481 select BOARD_LATE_INIT 482 select CPU_ARM1136 483 484config ARCH_BCM283X 485 bool "Broadcom BCM283X family" 486 select DM 487 select DM_SERIAL 488 select DM_GPIO 489 select OF_CONTROL 490 imply FAT_WRITE 491 492config TARGET_VEXPRESS_CA15_TC2 493 bool "Support vexpress_ca15_tc2" 494 select CPU_V7 495 select CPU_V7_HAS_NONSEC 496 select CPU_V7_HAS_VIRT 497 498config TARGET_VEXPRESS_CA5X2 499 bool "Support vexpress_ca5x2" 500 select CPU_V7 501 502config TARGET_VEXPRESS_CA9X4 503 bool "Support vexpress_ca9x4" 504 select CPU_V7 505 506config TARGET_BCM23550_W1D 507 bool "Support bcm23550_w1d" 508 select CPU_V7 509 imply CRC32_VERIFY 510 imply FAT_WRITE 511 512config TARGET_BCM28155_AP 513 bool "Support bcm28155_ap" 514 select CPU_V7 515 imply CRC32_VERIFY 516 imply FAT_WRITE 517 518config TARGET_BCMCYGNUS 519 bool "Support bcmcygnus" 520 select CPU_V7 521 imply CRC32_VERIFY 522 imply CMD_HASH 523 imply FAT_WRITE 524 imply HASH_VERIFY 525 526config TARGET_BCMNSP 527 bool "Support bcmnsp" 528 select CPU_V7 529 530config TARGET_BCMNS2 531 bool "Support Broadcom Northstar2" 532 select ARM64 533 help 534 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 535 ARMv8 Cortex-A57 processors targeting a broad range of networking 536 applications 537 538config ARCH_EXYNOS 539 bool "Samsung EXYNOS" 540 select DM 541 select DM_I2C 542 select DM_SPI_FLASH 543 select DM_SERIAL 544 select DM_SPI 545 select DM_GPIO 546 select DM_KEYBOARD 547 imply FAT_WRITE 548 549config ARCH_S5PC1XX 550 bool "Samsung S5PC1XX" 551 select CPU_V7 552 select DM 553 select DM_SERIAL 554 select DM_GPIO 555 select DM_I2C 556 557config ARCH_HIGHBANK 558 bool "Calxeda Highbank" 559 select CPU_V7 560 561config ARCH_INTEGRATOR 562 bool "ARM Ltd. Integrator family" 563 select DM 564 select DM_SERIAL 565 566config ARCH_KEYSTONE 567 bool "TI Keystone" 568 select CPU_V7 569 select SUPPORT_SPL 570 select SYS_THUMB_BUILD 571 select CMD_POWEROFF 572 imply CMD_MTDPARTS 573 imply FIT 574 575config ARCH_OMAP2PLUS 576 bool "TI OMAP2+" 577 select CPU_V7 578 select SPL_BOARD_INIT if SPL 579 select SUPPORT_SPL 580 imply FIT 581 582config ARCH_MESON 583 bool "Amlogic Meson" 584 help 585 Support for the Meson SoC family developed by Amlogic Inc., 586 targeted at media players and tablet computers. We currently 587 support the S905 (GXBaby) 64-bit SoC. 588 589config ARCH_MX7ULP 590 bool "NXP MX7ULP" 591 select CPU_V7 592 select ROM_UNIFIED_SECTIONS 593 594config ARCH_MX7 595 bool "Freescale MX7" 596 select CPU_V7 597 select SYS_FSL_HAS_SEC if SECURE_BOOT 598 select SYS_FSL_SEC_COMPAT_4 599 select SYS_FSL_SEC_LE 600 select BOARD_EARLY_INIT_F 601 select ARCH_MISC_INIT 602 603config ARCH_MX6 604 bool "Freescale MX6" 605 select CPU_V7 606 select SYS_FSL_HAS_SEC if SECURE_BOOT 607 select SYS_FSL_SEC_COMPAT_4 608 select SYS_FSL_SEC_LE 609 select SYS_THUMB_BUILD if SPL 610 611config ARCH_MX5 612 bool "Freescale MX5" 613 select CPU_V7 614 select BOARD_EARLY_INIT_F 615 616config ARCH_RMOBILE 617 bool "Renesas ARM SoCs" 618 select DM 619 select DM_SERIAL 620 select BOARD_EARLY_INIT_F 621 imply FAT_WRITE 622 imply SYS_THUMB_BUILD 623 624config TARGET_S32V234EVB 625 bool "Support s32v234evb" 626 select ARM64 627 select SYS_FSL_ERRATUM_ESDHC111 628 629config ARCH_SNAPDRAGON 630 bool "Qualcomm Snapdragon SoCs" 631 select ARM64 632 select DM 633 select DM_GPIO 634 select DM_SERIAL 635 select SPMI 636 select OF_CONTROL 637 select OF_SEPARATE 638 639config ARCH_SOCFPGA 640 bool "Altera SOCFPGA family" 641 select CPU_V7 642 select SUPPORT_SPL 643 select OF_CONTROL 644 select SPL_OF_CONTROL 645 select DM 646 select DM_SPI_FLASH 647 select DM_SPI 648 select ENABLE_ARM_SOC_BOOT0_HOOK 649 select ARCH_EARLY_INIT_R 650 select ARCH_MISC_INIT 651 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 652 select SYS_THUMB_BUILD 653 imply CMD_MTDPARTS 654 imply CRC32_VERIFY 655 imply FAT_WRITE 656 657config ARCH_SUNXI 658 bool "Support sunxi (Allwinner) SoCs" 659 select CMD_GPIO 660 select CMD_MMC if MMC 661 select CMD_USB if DISTRO_DEFAULTS 662 select DM 663 select DM_ETH 664 select DM_GPIO 665 select DM_KEYBOARD 666 select DM_SERIAL 667 select DM_USB if DISTRO_DEFAULTS 668 select OF_BOARD_SETUP 669 select OF_CONTROL 670 select OF_SEPARATE 671 select SPL_STACK_R if SPL 672 select SPL_SYS_MALLOC_SIMPLE if SPL 673 select SYS_NS16550 674 select SPL_SYS_THUMB_BUILD if !ARM64 675 select USB if DISTRO_DEFAULTS 676 select USB_STORAGE if DISTRO_DEFAULTS 677 select USB_KEYBOARD if DISTRO_DEFAULTS 678 select USE_TINY_PRINTF 679 imply FAT_WRITE 680 imply PRE_CONSOLE_BUFFER 681 imply SPL_GPIO_SUPPORT 682 imply SPL_LIBCOMMON_SUPPORT 683 imply SPL_LIBDISK_SUPPORT 684 imply SPL_LIBGENERIC_SUPPORT 685 imply SPL_MMC_SUPPORT if MMC 686 imply SPL_POWER_SUPPORT 687 imply SPL_SERIAL_SUPPORT 688 689config TARGET_TS4600 690 bool "Support TS4600" 691 select CPU_ARM926EJS 692 select SUPPORT_SPL 693 694config ARCH_VF610 695 bool "Freescale Vybrid" 696 select CPU_V7 697 select SYS_FSL_ERRATUM_ESDHC111 698 imply CMD_MTDPARTS 699 700config ARCH_ZYNQ 701 bool "Xilinx Zynq Platform" 702 select BOARD_LATE_INIT 703 select CPU_V7 704 select SUPPORT_SPL 705 select OF_CONTROL 706 select SPL_BOARD_INIT if SPL 707 select SPL_OF_CONTROL if SPL 708 select DM 709 select DM_ETH 710 select DM_GPIO 711 select SPL_DM if SPL 712 select DM_MMC 713 select DM_MMC_OPS 714 select DM_SPI 715 select DM_SERIAL 716 select DM_SPI_FLASH 717 select SPL_SEPARATE_BSS if SPL 718 select DM_USB if USB 719 select BLK 720 select CLK 721 select SPL_CLK 722 select CLK_ZYNQ 723 imply CMD_CLK 724 imply FAT_WRITE 725 726config ARCH_ZYNQMP 727 bool "Support Xilinx ZynqMP Platform" 728 select ARM64 729 select BOARD_LATE_INIT 730 select DM 731 select OF_CONTROL 732 select DM_SERIAL 733 select SUPPORT_SPL 734 select CLK 735 select SPL_BOARD_INIT if SPL 736 select SPL_CLK 737 select DM_USB if USB 738 imply FAT_WRITE 739 740config TEGRA 741 bool "NVIDIA Tegra" 742 imply FAT_WRITE 743 744config TARGET_VEXPRESS64_AEMV8A 745 bool "Support vexpress_aemv8a" 746 select ARM64 747 748config TARGET_VEXPRESS64_BASE_FVP 749 bool "Support Versatile Express ARMv8a FVP BASE model" 750 select ARM64 751 select SEMIHOSTING 752 753config TARGET_VEXPRESS64_BASE_FVP_DRAM 754 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 755 select ARM64 756 help 757 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 758 the default config to allow the user to load the images directly into 759 DRAM using model parameters rather than by using semi-hosting to load 760 the files from the host filesystem. 761 762config TARGET_VEXPRESS64_JUNO 763 bool "Support Versatile Express Juno Development Platform" 764 select ARM64 765 766config TARGET_LS2080A_EMU 767 bool "Support ls2080a_emu" 768 select ARCH_LS2080A 769 select ARM64 770 select ARMV8_MULTIENTRY 771 select ARCH_MISC_INIT 772 help 773 Support for Freescale LS2080A_EMU platform 774 The LS2080A Development System (EMULATOR) is a pre silicon 775 development platform that supports the QorIQ LS2080A 776 Layerscape Architecture processor. 777 778config TARGET_LS2080A_SIMU 779 bool "Support ls2080a_simu" 780 select ARCH_LS2080A 781 select ARM64 782 select ARMV8_MULTIENTRY 783 select ARCH_MISC_INIT 784 help 785 Support for Freescale LS2080A_SIMU platform 786 The LS2080A Development System (QDS) is a pre silicon 787 development platform that supports the QorIQ LS2080A 788 Layerscape Architecture processor. 789 790config TARGET_LS2080AQDS 791 bool "Support ls2080aqds" 792 select ARCH_LS2080A 793 select ARM64 794 select ARMV8_MULTIENTRY 795 select BOARD_LATE_INIT 796 select SUPPORT_SPL 797 select ARCH_MISC_INIT 798 imply SCSI 799 help 800 Support for Freescale LS2080AQDS platform 801 The LS2080A Development System (QDS) is a high-performance 802 development platform that supports the QorIQ LS2080A 803 Layerscape Architecture processor. 804 805config TARGET_LS2080ARDB 806 bool "Support ls2080ardb" 807 select ARCH_LS2080A 808 select ARM64 809 select ARMV8_MULTIENTRY 810 select BOARD_LATE_INIT 811 select SUPPORT_SPL 812 select ARCH_MISC_INIT 813 imply SCSI 814 help 815 Support for Freescale LS2080ARDB platform. 816 The LS2080A Reference design board (RDB) is a high-performance 817 development platform that supports the QorIQ LS2080A 818 Layerscape Architecture processor. 819 820config TARGET_LS2081ARDB 821 bool "Support ls2081ardb" 822 select ARCH_LS2080A 823 select ARM64 824 select ARMV8_MULTIENTRY 825 select BOARD_LATE_INIT 826 select SUPPORT_SPL 827 select ARCH_MISC_INIT 828 help 829 Support for Freescale LS2081ARDB platform. 830 The LS2081A Reference design board (RDB) is a high-performance 831 development platform that supports the QorIQ LS2081A/LS2041A 832 Layerscape Architecture processor. 833 834config TARGET_HIKEY 835 bool "Support HiKey 96boards Consumer Edition Platform" 836 select ARM64 837 select DM 838 select DM_GPIO 839 select DM_SERIAL 840 select OF_CONTROL 841 help 842 Support for HiKey 96boards platform. It features a HI6220 843 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 844 845config TARGET_POPLAR 846 bool "Support Poplar 96boards Enterprise Edition Platform" 847 select ARM64 848 select DM 849 select OF_CONTROL 850 select DM_SERIAL 851 select DM_USB 852 help 853 Support for Poplar 96boards EE platform. It features a HI3798cv200 854 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 855 making it capable of running any commercial set-top solution based on 856 Linux or Android. 857 858config TARGET_LS1012AQDS 859 bool "Support ls1012aqds" 860 select ARCH_LS1012A 861 select ARM64 862 select BOARD_LATE_INIT 863 help 864 Support for Freescale LS1012AQDS platform. 865 The LS1012A Development System (QDS) is a high-performance 866 development platform that supports the QorIQ LS1012A 867 Layerscape Architecture processor. 868 869config TARGET_LS1012ARDB 870 bool "Support ls1012ardb" 871 select ARCH_LS1012A 872 select ARM64 873 select BOARD_LATE_INIT 874 imply SCSI 875 help 876 Support for Freescale LS1012ARDB platform. 877 The LS1012A Reference design board (RDB) is a high-performance 878 development platform that supports the QorIQ LS1012A 879 Layerscape Architecture processor. 880 881config TARGET_LS1012AFRDM 882 bool "Support ls1012afrdm" 883 select ARCH_LS1012A 884 select ARM64 885 help 886 Support for Freescale LS1012AFRDM platform. 887 The LS1012A Freedom board (FRDM) is a high-performance 888 development platform that supports the QorIQ LS1012A 889 Layerscape Architecture processor. 890 891config TARGET_LS1021AQDS 892 bool "Support ls1021aqds" 893 select BOARD_LATE_INIT 894 select CPU_V7 895 select CPU_V7_HAS_NONSEC 896 select CPU_V7_HAS_VIRT 897 select SUPPORT_SPL 898 select ARCH_LS1021A 899 select ARCH_SUPPORT_PSCI 900 select LS1_DEEP_SLEEP 901 select SYS_FSL_DDR 902 select BOARD_EARLY_INIT_F 903 imply SCSI 904 905config TARGET_LS1021ATWR 906 bool "Support ls1021atwr" 907 select BOARD_LATE_INIT 908 select CPU_V7 909 select CPU_V7_HAS_NONSEC 910 select CPU_V7_HAS_VIRT 911 select SUPPORT_SPL 912 select ARCH_LS1021A 913 select ARCH_SUPPORT_PSCI 914 select LS1_DEEP_SLEEP 915 select BOARD_EARLY_INIT_F 916 imply SCSI 917 918config TARGET_LS1021AIOT 919 bool "Support ls1021aiot" 920 select BOARD_LATE_INIT 921 select CPU_V7 922 select CPU_V7_HAS_NONSEC 923 select CPU_V7_HAS_VIRT 924 select SUPPORT_SPL 925 select ARCH_LS1021A 926 select ARCH_SUPPORT_PSCI 927 imply SCSI 928 help 929 Support for Freescale LS1021AIOT platform. 930 The LS1021A Freescale board (IOT) is a high-performance 931 development platform that supports the QorIQ LS1021A 932 Layerscape Architecture processor. 933 934config TARGET_LS1043AQDS 935 bool "Support ls1043aqds" 936 select ARCH_LS1043A 937 select ARM64 938 select ARMV8_MULTIENTRY 939 select BOARD_LATE_INIT 940 select SUPPORT_SPL 941 select BOARD_EARLY_INIT_F 942 imply SCSI 943 help 944 Support for Freescale LS1043AQDS platform. 945 946config TARGET_LS1043ARDB 947 bool "Support ls1043ardb" 948 select ARCH_LS1043A 949 select ARM64 950 select ARMV8_MULTIENTRY 951 select BOARD_LATE_INIT 952 select SUPPORT_SPL 953 select BOARD_EARLY_INIT_F 954 imply SCSI 955 help 956 Support for Freescale LS1043ARDB platform. 957 958config TARGET_LS1046AQDS 959 bool "Support ls1046aqds" 960 select ARCH_LS1046A 961 select ARM64 962 select ARMV8_MULTIENTRY 963 select BOARD_LATE_INIT 964 select SUPPORT_SPL 965 select DM_SPI_FLASH if DM_SPI 966 select BOARD_EARLY_INIT_F 967 imply SCSI 968 help 969 Support for Freescale LS1046AQDS platform. 970 The LS1046A Development System (QDS) is a high-performance 971 development platform that supports the QorIQ LS1046A 972 Layerscape Architecture processor. 973 974config TARGET_LS1046ARDB 975 bool "Support ls1046ardb" 976 select ARCH_LS1046A 977 select ARM64 978 select ARMV8_MULTIENTRY 979 select BOARD_LATE_INIT 980 select SUPPORT_SPL 981 select DM_SPI_FLASH if DM_SPI 982 select POWER_MC34VR500 983 select BOARD_EARLY_INIT_F 984 imply SCSI 985 help 986 Support for Freescale LS1046ARDB platform. 987 The LS1046A Reference Design Board (RDB) is a high-performance 988 development platform that supports the QorIQ LS1046A 989 Layerscape Architecture processor. 990 991config TARGET_H2200 992 bool "Support h2200" 993 select CPU_PXA 994 995config TARGET_ZIPITZ2 996 bool "Support zipitz2" 997 select CPU_PXA 998 999config TARGET_COLIBRI_PXA270 1000 bool "Support colibri_pxa270" 1001 select CPU_PXA 1002 1003config ARCH_UNIPHIER 1004 bool "Socionext UniPhier SoCs" 1005 select BOARD_LATE_INIT 1006 select CLK_UNIPHIER 1007 select DM 1008 select DM_GPIO 1009 select DM_I2C 1010 select DM_MMC 1011 select DM_RESET 1012 select DM_SERIAL 1013 select DM_USB 1014 select OF_CONTROL 1015 select OF_LIBFDT 1016 select PINCTRL 1017 select SPL_BOARD_INIT if SPL 1018 select SPL_DM if SPL 1019 select SPL_LIBCOMMON_SUPPORT if SPL 1020 select SPL_LIBGENERIC_SUPPORT if SPL 1021 select SPL_OF_CONTROL if SPL 1022 select SPL_PINCTRL if SPL 1023 select SUPPORT_SPL 1024 imply FAT_WRITE 1025 help 1026 Support for UniPhier SoC family developed by Socionext Inc. 1027 (formerly, System LSI Business Division of Panasonic Corporation) 1028 1029config STM32 1030 bool "Support STM32" 1031 select CPU_V7M 1032 select DM 1033 select DM_SERIAL 1034 select SYS_THUMB_BUILD 1035 1036config ARCH_STI 1037 bool "Support STMicrolectronics SoCs" 1038 select CPU_V7 1039 select DM 1040 select DM_SERIAL 1041 select BLK 1042 select DM_MMC 1043 select DM_RESET 1044 help 1045 Support for STMicroelectronics STiH407/10 SoC family. 1046 This SoC is used on Linaro 96Board STiH410-B2260 1047 1048config ARCH_ROCKCHIP 1049 bool "Support Rockchip SoCs" 1050 select OF_CONTROL 1051 select BLK 1052 select DM 1053 select SPL_DM if SPL 1054 select SYS_MALLOC_F 1055 select SYS_THUMB_BUILD if !ARM64 1056 select SPL_SYS_MALLOC_SIMPLE if SPL 1057 select DM_GPIO 1058 select DM_I2C 1059 select DM_MMC 1060 select DM_MMC_OPS 1061 select DM_SERIAL 1062 select DM_SPI 1063 select DM_SPI_FLASH 1064 select DM_USB if USB 1065 select DM_PWM 1066 select DM_REGULATOR 1067 imply FAT_WRITE 1068 1069config TARGET_THUNDERX_88XX 1070 bool "Support ThunderX 88xx" 1071 select ARM64 1072 select OF_CONTROL 1073 select SYS_CACHE_SHIFT_7 1074 1075config ARCH_ASPEED 1076 bool "Support Aspeed SoCs" 1077 select OF_CONTROL 1078 select DM 1079 1080endchoice 1081 1082source "arch/arm/mach-aspeed/Kconfig" 1083 1084source "arch/arm/mach-at91/Kconfig" 1085 1086source "arch/arm/mach-bcm283x/Kconfig" 1087 1088source "arch/arm/mach-davinci/Kconfig" 1089 1090source "arch/arm/mach-exynos/Kconfig" 1091 1092source "arch/arm/mach-highbank/Kconfig" 1093 1094source "arch/arm/mach-integrator/Kconfig" 1095 1096source "arch/arm/mach-keystone/Kconfig" 1097 1098source "arch/arm/mach-kirkwood/Kconfig" 1099 1100source "arch/arm/mach-mvebu/Kconfig" 1101 1102source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1103 1104source "arch/arm/mach-imx/mx7ulp/Kconfig" 1105 1106source "arch/arm/mach-imx/mx7/Kconfig" 1107 1108source "arch/arm/mach-imx/mx6/Kconfig" 1109 1110source "arch/arm/mach-imx/mx5/Kconfig" 1111 1112source "arch/arm/mach-omap2/Kconfig" 1113 1114source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1115 1116source "arch/arm/mach-orion5x/Kconfig" 1117 1118source "arch/arm/mach-rmobile/Kconfig" 1119 1120source "arch/arm/mach-meson/Kconfig" 1121 1122source "arch/arm/mach-rockchip/Kconfig" 1123 1124source "arch/arm/mach-s5pc1xx/Kconfig" 1125 1126source "arch/arm/mach-snapdragon/Kconfig" 1127 1128source "arch/arm/mach-socfpga/Kconfig" 1129 1130source "arch/arm/mach-sti/Kconfig" 1131 1132source "arch/arm/mach-stm32/Kconfig" 1133 1134source "arch/arm/mach-sunxi/Kconfig" 1135 1136source "arch/arm/mach-tegra/Kconfig" 1137 1138source "arch/arm/mach-uniphier/Kconfig" 1139 1140source "arch/arm/cpu/armv7/vf610/Kconfig" 1141 1142source "arch/arm/mach-zynq/Kconfig" 1143 1144source "arch/arm/cpu/armv7/Kconfig" 1145 1146source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1147 1148source "arch/arm/cpu/armv8/Kconfig" 1149 1150source "arch/arm/mach-imx/Kconfig" 1151 1152source "board/aries/m28evk/Kconfig" 1153source "board/bosch/shc/Kconfig" 1154source "board/CarMediaLab/flea3/Kconfig" 1155source "board/Marvell/aspenite/Kconfig" 1156source "board/Marvell/gplugd/Kconfig" 1157source "board/armadeus/apf27/Kconfig" 1158source "board/armltd/vexpress/Kconfig" 1159source "board/armltd/vexpress64/Kconfig" 1160source "board/bluegiga/apx4devkit/Kconfig" 1161source "board/broadcom/bcm23550_w1d/Kconfig" 1162source "board/broadcom/bcm28155_ap/Kconfig" 1163source "board/broadcom/bcmcygnus/Kconfig" 1164source "board/broadcom/bcmnsp/Kconfig" 1165source "board/broadcom/bcmns2/Kconfig" 1166source "board/cavium/thunderx/Kconfig" 1167source "board/cirrus/edb93xx/Kconfig" 1168source "board/creative/xfi3/Kconfig" 1169source "board/freescale/ls2080a/Kconfig" 1170source "board/freescale/ls2080aqds/Kconfig" 1171source "board/freescale/ls2080ardb/Kconfig" 1172source "board/freescale/ls1021aqds/Kconfig" 1173source "board/freescale/ls1043aqds/Kconfig" 1174source "board/freescale/ls1021atwr/Kconfig" 1175source "board/freescale/ls1021aiot/Kconfig" 1176source "board/freescale/ls1046aqds/Kconfig" 1177source "board/freescale/ls1043ardb/Kconfig" 1178source "board/freescale/ls1046ardb/Kconfig" 1179source "board/freescale/ls1012aqds/Kconfig" 1180source "board/freescale/ls1012ardb/Kconfig" 1181source "board/freescale/ls1012afrdm/Kconfig" 1182source "board/freescale/mx23evk/Kconfig" 1183source "board/freescale/mx25pdk/Kconfig" 1184source "board/freescale/mx28evk/Kconfig" 1185source "board/freescale/mx31ads/Kconfig" 1186source "board/freescale/mx31pdk/Kconfig" 1187source "board/freescale/mx35pdk/Kconfig" 1188source "board/freescale/s32v234evb/Kconfig" 1189source "board/gdsys/a38x/Kconfig" 1190source "board/grinn/chiliboard/Kconfig" 1191source "board/gumstix/pepper/Kconfig" 1192source "board/h2200/Kconfig" 1193source "board/hisilicon/hikey/Kconfig" 1194source "board/hisilicon/poplar/Kconfig" 1195source "board/imx31_phycore/Kconfig" 1196source "board/isee/igep003x/Kconfig" 1197source "board/olimex/mx23_olinuxino/Kconfig" 1198source "board/phytec/pcm051/Kconfig" 1199source "board/ppcag/bg0900/Kconfig" 1200source "board/sandisk/sansa_fuze_plus/Kconfig" 1201source "board/schulercontrol/sc_sps_1/Kconfig" 1202source "board/silica/pengwyn/Kconfig" 1203source "board/spear/spear300/Kconfig" 1204source "board/spear/spear310/Kconfig" 1205source "board/spear/spear320/Kconfig" 1206source "board/spear/spear600/Kconfig" 1207source "board/spear/x600/Kconfig" 1208source "board/st/stv0991/Kconfig" 1209source "board/syteco/zmx25/Kconfig" 1210source "board/tcl/sl50/Kconfig" 1211source "board/birdland/bav335x/Kconfig" 1212source "board/timll/devkit3250/Kconfig" 1213source "board/toradex/colibri_pxa270/Kconfig" 1214source "board/technologic/ts4600/Kconfig" 1215source "board/vscom/baltos/Kconfig" 1216source "board/woodburn/Kconfig" 1217source "board/work-microwave/work_92105/Kconfig" 1218source "board/zipitz2/Kconfig" 1219 1220source "arch/arm/Kconfig.debug" 1221 1222endmenu 1223