1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_DEVKIT3250 447 bool "Support devkit3250" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_WORK_92105 452 bool "Support work_92105" 453 select CPU_ARM926EJS 454 select SUPPORT_SPL 455 456config TARGET_APF27 457 bool "Support apf27" 458 select CPU_ARM926EJS 459 select SUPPORT_SPL 460 461config ORION5X 462 bool "Marvell Orion" 463 select CPU_ARM926EJS 464 465config TARGET_SPEAR300 466 bool "Support spear300" 467 select BOARD_EARLY_INIT_F 468 select CPU_ARM926EJS 469 select PL011_SERIAL 470 imply CMD_SAVES 471 472config TARGET_SPEAR310 473 bool "Support spear310" 474 select BOARD_EARLY_INIT_F 475 select CPU_ARM926EJS 476 select PL011_SERIAL 477 imply CMD_SAVES 478 479config TARGET_SPEAR320 480 bool "Support spear320" 481 select BOARD_EARLY_INIT_F 482 select CPU_ARM926EJS 483 select PL011_SERIAL 484 imply CMD_SAVES 485 486config TARGET_SPEAR600 487 bool "Support spear600" 488 select BOARD_EARLY_INIT_F 489 select CPU_ARM926EJS 490 select PL011_SERIAL 491 imply CMD_SAVES 492 493config TARGET_STV0991 494 bool "Support stv0991" 495 select CPU_V7A 496 select DM 497 select DM_SERIAL 498 select DM_SPI 499 select DM_SPI_FLASH 500 select PL01X_SERIAL 501 select SPI 502 select SPI_FLASH 503 imply CMD_DM 504 505config TARGET_X600 506 bool "Support x600" 507 select BOARD_LATE_INIT 508 select CPU_ARM926EJS 509 select PL011_SERIAL 510 select SUPPORT_SPL 511 512config TARGET_WOODBURN 513 bool "Support woodburn" 514 select CPU_ARM1136 515 516config TARGET_WOODBURN_SD 517 bool "Support woodburn_sd" 518 select CPU_ARM1136 519 select SUPPORT_SPL 520 521config TARGET_FLEA3 522 bool "Support flea3" 523 select CPU_ARM1136 524 525config TARGET_MX35PDK 526 bool "Support mx35pdk" 527 select BOARD_LATE_INIT 528 select CPU_ARM1136 529 530config ARCH_BCM283X 531 bool "Broadcom BCM283X family" 532 select DM 533 select DM_GPIO 534 select DM_SERIAL 535 select OF_CONTROL 536 select PL01X_SERIAL 537 select SERIAL_SEARCH_ALL 538 imply CMD_DM 539 imply FAT_WRITE 540 541config TARGET_VEXPRESS_CA15_TC2 542 bool "Support vexpress_ca15_tc2" 543 select CPU_V7A 544 select CPU_V7_HAS_NONSEC 545 select CPU_V7_HAS_VIRT 546 select PL011_SERIAL 547 548config ARCH_BCMSTB 549 bool "Broadcom BCM7XXX family" 550 select CPU_V7A 551 select DM 552 select OF_CONTROL 553 select OF_PRIOR_STAGE 554 imply CMD_DM 555 help 556 This enables support for Broadcom ARM-based set-top box 557 chipsets, including the 7445 family of chips. 558 559config TARGET_VEXPRESS_CA5X2 560 bool "Support vexpress_ca5x2" 561 select CPU_V7A 562 select PL011_SERIAL 563 564config TARGET_VEXPRESS_CA9X4 565 bool "Support vexpress_ca9x4" 566 select CPU_V7A 567 select PL011_SERIAL 568 569config TARGET_BCM23550_W1D 570 bool "Support bcm23550_w1d" 571 select CPU_V7A 572 imply CRC32_VERIFY 573 imply FAT_WRITE 574 575config TARGET_BCM28155_AP 576 bool "Support bcm28155_ap" 577 select CPU_V7A 578 imply CRC32_VERIFY 579 imply FAT_WRITE 580 581config TARGET_BCMCYGNUS 582 bool "Support bcmcygnus" 583 select CPU_V7A 584 imply BCM_SF2_ETH 585 imply BCM_SF2_ETH_GMAC 586 imply CMD_HASH 587 imply CRC32_VERIFY 588 imply FAT_WRITE 589 imply HASH_VERIFY 590 imply NETDEVICES 591 592config TARGET_BCMNSP 593 bool "Support bcmnsp" 594 select CPU_V7A 595 596config TARGET_BCMNS2 597 bool "Support Broadcom Northstar2" 598 select ARM64 599 help 600 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 601 ARMv8 Cortex-A57 processors targeting a broad range of networking 602 applications 603 604config ARCH_EXYNOS 605 bool "Samsung EXYNOS" 606 select DM 607 select DM_GPIO 608 select DM_I2C 609 select DM_KEYBOARD 610 select DM_SERIAL 611 select DM_SPI 612 select DM_SPI_FLASH 613 select SPI 614 imply CMD_DM 615 imply FAT_WRITE 616 617config ARCH_S5PC1XX 618 bool "Samsung S5PC1XX" 619 select CPU_V7A 620 select DM 621 select DM_GPIO 622 select DM_I2C 623 select DM_SERIAL 624 imply CMD_DM 625 626config ARCH_HIGHBANK 627 bool "Calxeda Highbank" 628 select CPU_V7A 629 select PL011_SERIAL 630 631config ARCH_INTEGRATOR 632 bool "ARM Ltd. Integrator family" 633 select DM 634 select DM_SERIAL 635 select PL01X_SERIAL 636 imply CMD_DM 637 638config ARCH_KEYSTONE 639 bool "TI Keystone" 640 select CMD_POWEROFF 641 select CPU_V7A 642 select SUPPORT_SPL 643 select SYS_ARCH_TIMER 644 select SYS_THUMB_BUILD 645 imply CMD_MTDPARTS 646 imply CMD_SAVES 647 imply FIT 648 649config ARCH_K3 650 bool "Texas Instruments' K3 Architecture" 651 select SPL 652 select SUPPORT_SPL 653 select FIT 654 655config ARCH_OMAP2PLUS 656 bool "TI OMAP2+" 657 select CPU_V7A 658 select SPL_BOARD_INIT if SPL 659 select SPL_STACK_R if SPL 660 select SUPPORT_SPL 661 imply FIT 662 663config ARCH_MESON 664 bool "Amlogic Meson" 665 imply DISTRO_DEFAULTS 666 help 667 Support for the Meson SoC family developed by Amlogic Inc., 668 targeted at media players and tablet computers. We currently 669 support the S905 (GXBaby) 64-bit SoC. 670 671config ARCH_MX8M 672 bool "NXP i.MX8M platform" 673 select ARM64 674 select DM 675 select SUPPORT_SPL 676 imply CMD_DM 677 678config ARCH_MX23 679 bool "NXP i.MX23 family" 680 select CPU_ARM926EJS 681 select PL011_SERIAL 682 select SUPPORT_SPL 683 684config ARCH_MX25 685 bool "NXP MX25" 686 select CPU_ARM926EJS 687 imply MXC_GPIO 688 689config ARCH_MX28 690 bool "NXP i.MX28 family" 691 select CPU_ARM926EJS 692 select PL011_SERIAL 693 select SUPPORT_SPL 694 695config ARCH_MX31 696 bool "NXP i.MX31 family" 697 select CPU_ARM1136 698 699config ARCH_MX7ULP 700 bool "NXP MX7ULP" 701 select CPU_V7A 702 select ROM_UNIFIED_SECTIONS 703 imply MXC_GPIO 704 705config ARCH_MX7 706 bool "Freescale MX7" 707 select ARCH_MISC_INIT 708 select BOARD_EARLY_INIT_F 709 select CPU_V7A 710 select SYS_FSL_HAS_SEC if SECURE_BOOT 711 select SYS_FSL_SEC_COMPAT_4 712 select SYS_FSL_SEC_LE 713 imply MXC_GPIO 714 715config ARCH_MX6 716 bool "Freescale MX6" 717 select CPU_V7A 718 select SYS_FSL_HAS_SEC if SECURE_BOOT 719 select SYS_FSL_SEC_COMPAT_4 720 select SYS_FSL_SEC_LE 721 select SYS_THUMB_BUILD if SPL 722 imply MXC_GPIO 723 724if ARCH_MX6 725config SPL_LDSCRIPT 726 default "arch/arm/mach-omap2/u-boot-spl.lds" 727endif 728 729config ARCH_MX5 730 bool "Freescale MX5" 731 select BOARD_EARLY_INIT_F 732 select CPU_V7A 733 imply MXC_GPIO 734 735config ARCH_OWL 736 bool "Actions Semi OWL SoCs" 737 select ARM64 738 select DM 739 select DM_SERIAL 740 select OF_CONTROL 741 imply CMD_DM 742 743config ARCH_QEMU 744 bool "QEMU Virtual Platform" 745 select DM 746 select DM_SERIAL 747 select OF_CONTROL 748 select PL01X_SERIAL 749 imply CMD_DM 750 imply DM_RTC 751 imply RTC_PL031 752 753config ARCH_RMOBILE 754 bool "Renesas ARM SoCs" 755 select BOARD_EARLY_INIT_F 756 select DM 757 select DM_SERIAL 758 imply CMD_DM 759 imply FAT_WRITE 760 imply SYS_THUMB_BUILD 761 762config TARGET_S32V234EVB 763 bool "Support s32v234evb" 764 select ARM64 765 select SYS_FSL_ERRATUM_ESDHC111 766 767config ARCH_SNAPDRAGON 768 bool "Qualcomm Snapdragon SoCs" 769 select ARM64 770 select DM 771 select DM_GPIO 772 select DM_SERIAL 773 select MSM_SMEM 774 select OF_CONTROL 775 select OF_SEPARATE 776 select SMEM 777 select SPMI 778 imply CMD_DM 779 780config ARCH_SOCFPGA 781 bool "Altera SOCFPGA family" 782 select ARCH_EARLY_INIT_R 783 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 784 select ARM64 if TARGET_SOCFPGA_STRATIX10 785 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 786 select DM 787 select DM_SERIAL 788 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 789 select OF_CONTROL 790 select SPL_DM_RESET if DM_RESET 791 select SPL_DM_SERIAL 792 select SPL_LIBCOMMON_SUPPORT 793 select SPL_LIBDISK_SUPPORT 794 select SPL_LIBGENERIC_SUPPORT 795 select SPL_MMC_SUPPORT if DM_MMC 796 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 797 select SPL_OF_CONTROL 798 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 799 select SPL_SERIAL_SUPPORT 800 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 801 select SPL_SPI_SUPPORT if DM_SPI 802 select SPL_WATCHDOG_SUPPORT 803 select SUPPORT_SPL 804 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 805 select SYS_NS16550 806 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 807 imply CMD_DM 808 imply CMD_MTDPARTS 809 imply CRC32_VERIFY 810 imply DM_SPI 811 imply DM_SPI_FLASH 812 imply FAT_WRITE 813 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 814 815config ARCH_SUNXI 816 bool "Support sunxi (Allwinner) SoCs" 817 select BINMAN 818 select CMD_GPIO 819 select CMD_MMC if MMC 820 select CMD_USB if DISTRO_DEFAULTS 821 select DM 822 select DM_ETH 823 select DM_GPIO 824 select DM_KEYBOARD 825 select DM_SERIAL 826 select DM_USB if DISTRO_DEFAULTS 827 select OF_BOARD_SETUP 828 select OF_CONTROL 829 select OF_SEPARATE 830 select SPECIFY_CONSOLE_INDEX 831 select SPL_STACK_R if SPL 832 select SPL_SYS_MALLOC_SIMPLE if SPL 833 select SPL_SYS_THUMB_BUILD if !ARM64 834 select SYS_NS16550 835 select SYS_THUMB_BUILD if !ARM64 836 select USB if DISTRO_DEFAULTS 837 select USB_KEYBOARD if DISTRO_DEFAULTS 838 select USB_STORAGE if DISTRO_DEFAULTS 839 select USE_TINY_PRINTF 840 imply CMD_DM 841 imply CMD_GPT 842 imply CMD_UBI if NAND 843 imply DISTRO_DEFAULTS 844 imply FAT_WRITE 845 imply OF_LIBFDT_OVERLAY 846 imply PRE_CONSOLE_BUFFER 847 imply SPL_GPIO_SUPPORT 848 imply SPL_LIBCOMMON_SUPPORT 849 imply SPL_LIBDISK_SUPPORT 850 imply SPL_LIBGENERIC_SUPPORT 851 imply SPL_MMC_SUPPORT if MMC 852 imply SPL_POWER_SUPPORT 853 imply SPL_SERIAL_SUPPORT 854 imply USB_GADGET 855 856config ARCH_VERSAL 857 bool "Support Xilinx Versal Platform" 858 select ARM64 859 select CLK 860 select DM 861 select DM_SERIAL 862 select OF_CONTROL 863 864config ARCH_VF610 865 bool "Freescale Vybrid" 866 select CPU_V7A 867 select SYS_FSL_ERRATUM_ESDHC111 868 imply CMD_MTDPARTS 869 imply NAND 870 871config ARCH_ZYNQ 872 bool "Xilinx Zynq based platform" 873 select BOARD_EARLY_INIT_F if WDT 874 select CLK 875 select CLK_ZYNQ 876 select CPU_V7A 877 select DM 878 select DM_ETH if NET 879 select DM_MMC if MMC 880 select DM_SERIAL 881 select DM_SPI 882 select DM_SPI_FLASH 883 select DM_USB if USB 884 select OF_CONTROL 885 select SPI 886 select SPL_BOARD_INIT if SPL 887 select SPL_CLK if SPL 888 select SPL_DM if SPL 889 select SPL_OF_CONTROL if SPL 890 select SPL_SEPARATE_BSS if SPL 891 select SUPPORT_SPL 892 imply ARCH_EARLY_INIT_R 893 imply BOARD_LATE_INIT 894 imply CMD_CLK 895 imply CMD_DM 896 imply CMD_SPL 897 imply FAT_WRITE 898 899config ARCH_ZYNQMP_R5 900 bool "Xilinx ZynqMP R5 based platform" 901 select CLK 902 select CPU_V7R 903 select DM 904 select DM_SERIAL 905 select OF_CONTROL 906 imply CMD_DM 907 908config ARCH_ZYNQMP 909 bool "Xilinx ZynqMP based platform" 910 select ARM64 911 select CLK 912 select DM 913 select DM_SERIAL 914 select DM_USB if USB 915 select OF_CONTROL 916 select SPL_BOARD_INIT if SPL 917 select SPL_CLK if SPL 918 select SUPPORT_SPL 919 imply BOARD_LATE_INIT 920 imply CMD_DM 921 imply FAT_WRITE 922 imply MP 923 924config TEGRA 925 bool "NVIDIA Tegra" 926 imply DISTRO_DEFAULTS 927 imply FAT_WRITE 928 929config TARGET_VEXPRESS64_AEMV8A 930 bool "Support vexpress_aemv8a" 931 select ARM64 932 select PL01X_SERIAL 933 934config TARGET_VEXPRESS64_BASE_FVP 935 bool "Support Versatile Express ARMv8a FVP BASE model" 936 select ARM64 937 select PL01X_SERIAL 938 select SEMIHOSTING 939 940config TARGET_VEXPRESS64_BASE_FVP_DRAM 941 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 942 select ARM64 943 select PL01X_SERIAL 944 help 945 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 946 the default config to allow the user to load the images directly into 947 DRAM using model parameters rather than by using semi-hosting to load 948 the files from the host filesystem. 949 950config TARGET_VEXPRESS64_JUNO 951 bool "Support Versatile Express Juno Development Platform" 952 select ARM64 953 select PL01X_SERIAL 954 955config TARGET_LS2080A_EMU 956 bool "Support ls2080a_emu" 957 select ARCH_LS2080A 958 select ARCH_MISC_INIT 959 select ARM64 960 select ARMV8_MULTIENTRY 961 help 962 Support for Freescale LS2080A_EMU platform 963 The LS2080A Development System (EMULATOR) is a pre silicon 964 development platform that supports the QorIQ LS2080A 965 Layerscape Architecture processor. 966 967config TARGET_LS2080A_SIMU 968 bool "Support ls2080a_simu" 969 select ARCH_LS2080A 970 select ARCH_MISC_INIT 971 select ARM64 972 select ARMV8_MULTIENTRY 973 help 974 Support for Freescale LS2080A_SIMU platform 975 The LS2080A Development System (QDS) is a pre silicon 976 development platform that supports the QorIQ LS2080A 977 Layerscape Architecture processor. 978 979config TARGET_LS1088AQDS 980 bool "Support ls1088aqds" 981 select ARCH_LS1088A 982 select ARCH_MISC_INIT 983 select ARM64 984 select ARMV8_MULTIENTRY 985 select BOARD_LATE_INIT 986 select SUPPORT_SPL 987 help 988 Support for NXP LS1088AQDS platform 989 The LS1088A Development System (QDS) is a high-performance 990 development platform that supports the QorIQ LS1088A 991 Layerscape Architecture processor. 992 993config TARGET_LS2080AQDS 994 bool "Support ls2080aqds" 995 select ARCH_LS2080A 996 select ARCH_MISC_INIT 997 select ARM64 998 select ARMV8_MULTIENTRY 999 select BOARD_LATE_INIT 1000 select SUPPORT_SPL 1001 imply SCSI 1002 imply SCSI_AHCI 1003 help 1004 Support for Freescale LS2080AQDS platform 1005 The LS2080A Development System (QDS) is a high-performance 1006 development platform that supports the QorIQ LS2080A 1007 Layerscape Architecture processor. 1008 1009config TARGET_LS2080ARDB 1010 bool "Support ls2080ardb" 1011 select ARCH_LS2080A 1012 select ARCH_MISC_INIT 1013 select ARM64 1014 select ARMV8_MULTIENTRY 1015 select BOARD_LATE_INIT 1016 select SUPPORT_SPL 1017 imply SCSI 1018 imply SCSI_AHCI 1019 help 1020 Support for Freescale LS2080ARDB platform. 1021 The LS2080A Reference design board (RDB) is a high-performance 1022 development platform that supports the QorIQ LS2080A 1023 Layerscape Architecture processor. 1024 1025config TARGET_LS2081ARDB 1026 bool "Support ls2081ardb" 1027 select ARCH_LS2080A 1028 select ARCH_MISC_INIT 1029 select ARM64 1030 select ARMV8_MULTIENTRY 1031 select BOARD_LATE_INIT 1032 select SUPPORT_SPL 1033 help 1034 Support for Freescale LS2081ARDB platform. 1035 The LS2081A Reference design board (RDB) is a high-performance 1036 development platform that supports the QorIQ LS2081A/LS2041A 1037 Layerscape Architecture processor. 1038 1039config TARGET_HIKEY 1040 bool "Support HiKey 96boards Consumer Edition Platform" 1041 select ARM64 1042 select DM 1043 select DM_GPIO 1044 select DM_SERIAL 1045 select OF_CONTROL 1046 select PL01X_SERIAL 1047 select SPECIFY_CONSOLE_INDEX 1048 imply CMD_DM 1049 help 1050 Support for HiKey 96boards platform. It features a HI6220 1051 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1052 1053config TARGET_POPLAR 1054 bool "Support Poplar 96boards Enterprise Edition Platform" 1055 select ARM64 1056 select DM 1057 select DM_SERIAL 1058 select DM_USB 1059 select OF_CONTROL 1060 select PL01X_SERIAL 1061 imply CMD_DM 1062 help 1063 Support for Poplar 96boards EE platform. It features a HI3798cv200 1064 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1065 making it capable of running any commercial set-top solution based on 1066 Linux or Android. 1067 1068config TARGET_LS1012AQDS 1069 bool "Support ls1012aqds" 1070 select ARCH_LS1012A 1071 select ARM64 1072 select BOARD_LATE_INIT 1073 help 1074 Support for Freescale LS1012AQDS platform. 1075 The LS1012A Development System (QDS) is a high-performance 1076 development platform that supports the QorIQ LS1012A 1077 Layerscape Architecture processor. 1078 1079config TARGET_LS1012ARDB 1080 bool "Support ls1012ardb" 1081 select ARCH_LS1012A 1082 select ARM64 1083 select BOARD_LATE_INIT 1084 imply SCSI 1085 imply SCSI_AHCI 1086 help 1087 Support for Freescale LS1012ARDB platform. 1088 The LS1012A Reference design board (RDB) is a high-performance 1089 development platform that supports the QorIQ LS1012A 1090 Layerscape Architecture processor. 1091 1092config TARGET_LS1012A2G5RDB 1093 bool "Support ls1012a2g5rdb" 1094 select ARCH_LS1012A 1095 select ARM64 1096 select BOARD_LATE_INIT 1097 imply SCSI 1098 help 1099 Support for Freescale LS1012A2G5RDB platform. 1100 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1101 development platform that supports the QorIQ LS1012A 1102 Layerscape Architecture processor. 1103 1104config TARGET_LS1012AFRWY 1105 bool "Support ls1012afrwy" 1106 select ARCH_LS1012A 1107 select ARM64 1108 select BOARD_LATE_INIT 1109 imply SCSI 1110 imply SCSI_AHCI 1111 help 1112 Support for Freescale LS1012AFRWY platform. 1113 The LS1012A FRWY board (FRWY) is a high-performance 1114 development platform that supports the QorIQ LS1012A 1115 Layerscape Architecture processor. 1116 1117config TARGET_LS1012AFRDM 1118 bool "Support ls1012afrdm" 1119 select ARCH_LS1012A 1120 select ARM64 1121 help 1122 Support for Freescale LS1012AFRDM platform. 1123 The LS1012A Freedom board (FRDM) is a high-performance 1124 development platform that supports the QorIQ LS1012A 1125 Layerscape Architecture processor. 1126 1127config TARGET_LS1088ARDB 1128 bool "Support ls1088ardb" 1129 select ARCH_LS1088A 1130 select ARCH_MISC_INIT 1131 select ARM64 1132 select ARMV8_MULTIENTRY 1133 select BOARD_LATE_INIT 1134 select SUPPORT_SPL 1135 help 1136 Support for NXP LS1088ARDB platform. 1137 The LS1088A Reference design board (RDB) is a high-performance 1138 development platform that supports the QorIQ LS1088A 1139 Layerscape Architecture processor. 1140 1141config TARGET_LS1021AQDS 1142 bool "Support ls1021aqds" 1143 select ARCH_LS1021A 1144 select ARCH_SUPPORT_PSCI 1145 select BOARD_EARLY_INIT_F 1146 select BOARD_LATE_INIT 1147 select CPU_V7A 1148 select CPU_V7_HAS_NONSEC 1149 select CPU_V7_HAS_VIRT 1150 select LS1_DEEP_SLEEP 1151 select SUPPORT_SPL 1152 select SYS_FSL_DDR 1153 imply SCSI 1154 1155config TARGET_LS1021ATWR 1156 bool "Support ls1021atwr" 1157 select ARCH_LS1021A 1158 select ARCH_SUPPORT_PSCI 1159 select BOARD_EARLY_INIT_F 1160 select BOARD_LATE_INIT 1161 select CPU_V7A 1162 select CPU_V7_HAS_NONSEC 1163 select CPU_V7_HAS_VIRT 1164 select LS1_DEEP_SLEEP 1165 select SUPPORT_SPL 1166 imply SCSI 1167 1168config TARGET_LS1021AIOT 1169 bool "Support ls1021aiot" 1170 select ARCH_LS1021A 1171 select ARCH_SUPPORT_PSCI 1172 select BOARD_LATE_INIT 1173 select CPU_V7A 1174 select CPU_V7_HAS_NONSEC 1175 select CPU_V7_HAS_VIRT 1176 select SUPPORT_SPL 1177 imply SCSI 1178 help 1179 Support for Freescale LS1021AIOT platform. 1180 The LS1021A Freescale board (IOT) is a high-performance 1181 development platform that supports the QorIQ LS1021A 1182 Layerscape Architecture processor. 1183 1184config TARGET_LS1043AQDS 1185 bool "Support ls1043aqds" 1186 select ARCH_LS1043A 1187 select ARM64 1188 select ARMV8_MULTIENTRY 1189 select BOARD_EARLY_INIT_F 1190 select BOARD_LATE_INIT 1191 select SUPPORT_SPL 1192 imply SCSI 1193 help 1194 Support for Freescale LS1043AQDS platform. 1195 1196config TARGET_LS1043ARDB 1197 bool "Support ls1043ardb" 1198 select ARCH_LS1043A 1199 select ARM64 1200 select ARMV8_MULTIENTRY 1201 select BOARD_EARLY_INIT_F 1202 select BOARD_LATE_INIT 1203 select SUPPORT_SPL 1204 imply SCSI 1205 help 1206 Support for Freescale LS1043ARDB platform. 1207 1208config TARGET_LS1046AQDS 1209 bool "Support ls1046aqds" 1210 select ARCH_LS1046A 1211 select ARM64 1212 select ARMV8_MULTIENTRY 1213 select BOARD_EARLY_INIT_F 1214 select BOARD_LATE_INIT 1215 select DM_SPI_FLASH if DM_SPI 1216 select SUPPORT_SPL 1217 imply SCSI 1218 help 1219 Support for Freescale LS1046AQDS platform. 1220 The LS1046A Development System (QDS) is a high-performance 1221 development platform that supports the QorIQ LS1046A 1222 Layerscape Architecture processor. 1223 1224config TARGET_LS1046ARDB 1225 bool "Support ls1046ardb" 1226 select ARCH_LS1046A 1227 select ARM64 1228 select ARMV8_MULTIENTRY 1229 select BOARD_EARLY_INIT_F 1230 select BOARD_LATE_INIT 1231 select DM_SPI_FLASH if DM_SPI 1232 select POWER_MC34VR500 1233 select SUPPORT_SPL 1234 imply SCSI 1235 help 1236 Support for Freescale LS1046ARDB platform. 1237 The LS1046A Reference Design Board (RDB) is a high-performance 1238 development platform that supports the QorIQ LS1046A 1239 Layerscape Architecture processor. 1240 1241config TARGET_H2200 1242 bool "Support h2200" 1243 select CPU_PXA 1244 1245config TARGET_ZIPITZ2 1246 bool "Support zipitz2" 1247 select CPU_PXA 1248 1249config TARGET_COLIBRI_PXA270 1250 bool "Support colibri_pxa270" 1251 select CPU_PXA 1252 1253config ARCH_UNIPHIER 1254 bool "Socionext UniPhier SoCs" 1255 select BOARD_LATE_INIT 1256 select DM 1257 select DM_GPIO 1258 select DM_I2C 1259 select DM_MMC 1260 select DM_RESET 1261 select DM_SERIAL 1262 select DM_USB 1263 select OF_BOARD_SETUP 1264 select OF_CONTROL 1265 select OF_LIBFDT 1266 select PINCTRL 1267 select SPL_BOARD_INIT if SPL 1268 select SPL_DM if SPL 1269 select SPL_LIBCOMMON_SUPPORT if SPL 1270 select SPL_LIBGENERIC_SUPPORT if SPL 1271 select SPL_OF_CONTROL if SPL 1272 select SPL_PINCTRL if SPL 1273 select SUPPORT_SPL 1274 imply CMD_DM 1275 imply DISTRO_DEFAULTS 1276 imply FAT_WRITE 1277 help 1278 Support for UniPhier SoC family developed by Socionext Inc. 1279 (formerly, System LSI Business Division of Panasonic Corporation) 1280 1281config STM32 1282 bool "Support STMicroelectronics STM32 MCU with cortex M" 1283 select CPU_V7M 1284 select DM 1285 select DM_SERIAL 1286 imply CMD_DM 1287 1288config ARCH_STI 1289 bool "Support STMicrolectronics SoCs" 1290 select BLK 1291 select CPU_V7A 1292 select DM 1293 select DM_MMC 1294 select DM_RESET 1295 select DM_SERIAL 1296 imply CMD_DM 1297 help 1298 Support for STMicroelectronics STiH407/10 SoC family. 1299 This SoC is used on Linaro 96Board STiH410-B2260 1300 1301config ARCH_STM32MP 1302 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1303 select ARCH_MISC_INIT 1304 select BOARD_LATE_INIT 1305 select CLK 1306 select DM 1307 select DM_GPIO 1308 select DM_RESET 1309 select DM_SERIAL 1310 select MISC 1311 select OF_CONTROL 1312 select OF_LIBFDT 1313 select PINCTRL 1314 select REGMAP 1315 select SUPPORT_SPL 1316 select SYSCON 1317 select SYSRESET 1318 select SYS_THUMB_BUILD 1319 imply CMD_DM 1320 help 1321 Support for STM32MP SoC family developed by STMicroelectronics, 1322 MPUs based on ARM cortex A core 1323 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1324 BootLoader (FSBL) 1325 1326config ARCH_ROCKCHIP 1327 bool "Support Rockchip SoCs" 1328 select BLK 1329 select DM 1330 select DM_GPIO 1331 select DM_I2C 1332 select DM_MMC 1333 select DM_PWM 1334 select DM_REGULATOR 1335 select DM_SERIAL 1336 select DM_SPI 1337 select DM_SPI_FLASH 1338 select DM_USB if USB 1339 select ENABLE_ARM_SOC_BOOT0_HOOK 1340 select OF_CONTROL 1341 select SPI 1342 select SPL_DM if SPL 1343 select SPL_SYS_MALLOC_SIMPLE if SPL 1344 select SYS_MALLOC_F 1345 select SYS_THUMB_BUILD if !ARM64 1346 imply ADC 1347 imply CMD_DM 1348 imply DISTRO_DEFAULTS 1349 imply FAT_WRITE 1350 imply SARADC_ROCKCHIP 1351 imply SPL_SYSRESET 1352 imply SYS_NS16550 1353 imply TPL_SYSRESET 1354 imply USB_FUNCTION_FASTBOOT 1355 1356config TARGET_THUNDERX_88XX 1357 bool "Support ThunderX 88xx" 1358 select ARM64 1359 select OF_CONTROL 1360 select PL01X_SERIAL 1361 select SYS_CACHE_SHIFT_7 1362 1363config ARCH_ASPEED 1364 bool "Support Aspeed SoCs" 1365 select DM 1366 select OF_CONTROL 1367 imply CMD_DM 1368 1369endchoice 1370 1371config TI_SECURE_DEVICE 1372 bool "HS Device Type Support" 1373 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1374 help 1375 If a high secure (HS) device type is being used, this config 1376 must be set. This option impacts various aspects of the 1377 build system (to create signed boot images that can be 1378 authenticated) and the code. See the doc/README.ti-secure 1379 file for further details. 1380 1381source "arch/arm/mach-aspeed/Kconfig" 1382 1383source "arch/arm/mach-at91/Kconfig" 1384 1385source "arch/arm/mach-bcm283x/Kconfig" 1386 1387source "arch/arm/mach-bcmstb/Kconfig" 1388 1389source "arch/arm/mach-davinci/Kconfig" 1390 1391source "arch/arm/mach-exynos/Kconfig" 1392 1393source "arch/arm/mach-highbank/Kconfig" 1394 1395source "arch/arm/mach-integrator/Kconfig" 1396 1397source "arch/arm/mach-k3/Kconfig" 1398 1399source "arch/arm/mach-keystone/Kconfig" 1400 1401source "arch/arm/mach-kirkwood/Kconfig" 1402 1403source "arch/arm/mach-mvebu/Kconfig" 1404 1405source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1406 1407source "arch/arm/mach-imx/mx2/Kconfig" 1408 1409source "arch/arm/mach-imx/mx3/Kconfig" 1410 1411source "arch/arm/mach-imx/mx5/Kconfig" 1412 1413source "arch/arm/mach-imx/mx6/Kconfig" 1414 1415source "arch/arm/mach-imx/mx7/Kconfig" 1416 1417source "arch/arm/mach-imx/mx7ulp/Kconfig" 1418 1419source "arch/arm/mach-imx/mx8m/Kconfig" 1420 1421source "arch/arm/mach-imx/mxs/Kconfig" 1422 1423source "arch/arm/mach-omap2/Kconfig" 1424 1425source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1426 1427source "arch/arm/mach-orion5x/Kconfig" 1428 1429source "arch/arm/mach-owl/Kconfig" 1430 1431source "arch/arm/mach-rmobile/Kconfig" 1432 1433source "arch/arm/mach-meson/Kconfig" 1434 1435source "arch/arm/mach-qemu/Kconfig" 1436 1437source "arch/arm/mach-rockchip/Kconfig" 1438 1439source "arch/arm/mach-s5pc1xx/Kconfig" 1440 1441source "arch/arm/mach-snapdragon/Kconfig" 1442 1443source "arch/arm/mach-socfpga/Kconfig" 1444 1445source "arch/arm/mach-sti/Kconfig" 1446 1447source "arch/arm/mach-stm32/Kconfig" 1448 1449source "arch/arm/mach-stm32mp/Kconfig" 1450 1451source "arch/arm/mach-sunxi/Kconfig" 1452 1453source "arch/arm/mach-tegra/Kconfig" 1454 1455source "arch/arm/mach-uniphier/Kconfig" 1456 1457source "arch/arm/cpu/armv7/vf610/Kconfig" 1458 1459source "arch/arm/mach-zynq/Kconfig" 1460 1461source "arch/arm/mach-versal/Kconfig" 1462 1463source "arch/arm/mach-zynqmp-r5/Kconfig" 1464 1465source "arch/arm/cpu/armv7/Kconfig" 1466 1467source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1468 1469source "arch/arm/cpu/armv8/Kconfig" 1470 1471source "arch/arm/mach-imx/Kconfig" 1472 1473source "board/bosch/shc/Kconfig" 1474source "board/CarMediaLab/flea3/Kconfig" 1475source "board/Marvell/aspenite/Kconfig" 1476source "board/Marvell/gplugd/Kconfig" 1477source "board/armadeus/apf27/Kconfig" 1478source "board/armltd/vexpress/Kconfig" 1479source "board/armltd/vexpress64/Kconfig" 1480source "board/broadcom/bcm23550_w1d/Kconfig" 1481source "board/broadcom/bcm28155_ap/Kconfig" 1482source "board/broadcom/bcmcygnus/Kconfig" 1483source "board/broadcom/bcmnsp/Kconfig" 1484source "board/broadcom/bcmns2/Kconfig" 1485source "board/cavium/thunderx/Kconfig" 1486source "board/cirrus/edb93xx/Kconfig" 1487source "board/eets/pdu001/Kconfig" 1488source "board/freescale/ls2080a/Kconfig" 1489source "board/freescale/ls2080aqds/Kconfig" 1490source "board/freescale/ls2080ardb/Kconfig" 1491source "board/freescale/ls1088a/Kconfig" 1492source "board/freescale/ls1021aqds/Kconfig" 1493source "board/freescale/ls1043aqds/Kconfig" 1494source "board/freescale/ls1021atwr/Kconfig" 1495source "board/freescale/ls1021aiot/Kconfig" 1496source "board/freescale/ls1046aqds/Kconfig" 1497source "board/freescale/ls1043ardb/Kconfig" 1498source "board/freescale/ls1046ardb/Kconfig" 1499source "board/freescale/ls1012aqds/Kconfig" 1500source "board/freescale/ls1012ardb/Kconfig" 1501source "board/freescale/ls1012afrdm/Kconfig" 1502source "board/freescale/mx35pdk/Kconfig" 1503source "board/freescale/s32v234evb/Kconfig" 1504source "board/grinn/chiliboard/Kconfig" 1505source "board/gumstix/pepper/Kconfig" 1506source "board/h2200/Kconfig" 1507source "board/hisilicon/hikey/Kconfig" 1508source "board/hisilicon/poplar/Kconfig" 1509source "board/isee/igep003x/Kconfig" 1510source "board/phytec/pcm051/Kconfig" 1511source "board/silica/pengwyn/Kconfig" 1512source "board/spear/spear300/Kconfig" 1513source "board/spear/spear310/Kconfig" 1514source "board/spear/spear320/Kconfig" 1515source "board/spear/spear600/Kconfig" 1516source "board/spear/x600/Kconfig" 1517source "board/st/stv0991/Kconfig" 1518source "board/tcl/sl50/Kconfig" 1519source "board/ucRobotics/bubblegum_96/Kconfig" 1520source "board/birdland/bav335x/Kconfig" 1521source "board/timll/devkit3250/Kconfig" 1522source "board/toradex/colibri_pxa270/Kconfig" 1523source "board/vscom/baltos/Kconfig" 1524source "board/woodburn/Kconfig" 1525source "board/work-microwave/work_92105/Kconfig" 1526source "board/xilinx/Kconfig" 1527source "board/xilinx/zynq/Kconfig" 1528source "board/xilinx/zynqmp/Kconfig" 1529source "board/zipitz2/Kconfig" 1530 1531source "arch/arm/Kconfig.debug" 1532 1533endmenu 1534 1535config SPL_LDSCRIPT 1536 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1537 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1538 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1539 1540 1541