1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config ARCH_BCM63158 532 bool "Broadcom BCM63158 family" 533 select DM 534 select OF_CONTROL 535 imply CMD_DM 536 537config ARCH_BCM6858 538 bool "Broadcom BCM6858 family" 539 select DM 540 select OF_CONTROL 541 imply CMD_DM 542 543config TARGET_VEXPRESS_CA15_TC2 544 bool "Support vexpress_ca15_tc2" 545 select CPU_V7A 546 select CPU_V7_HAS_NONSEC 547 select CPU_V7_HAS_VIRT 548 select PL011_SERIAL 549 550config ARCH_BCMSTB 551 bool "Broadcom BCM7XXX family" 552 select CPU_V7A 553 select DM 554 select OF_CONTROL 555 select OF_PRIOR_STAGE 556 imply CMD_DM 557 help 558 This enables support for Broadcom ARM-based set-top box 559 chipsets, including the 7445 family of chips. 560 561config TARGET_VEXPRESS_CA5X2 562 bool "Support vexpress_ca5x2" 563 select CPU_V7A 564 select PL011_SERIAL 565 566config TARGET_VEXPRESS_CA9X4 567 bool "Support vexpress_ca9x4" 568 select CPU_V7A 569 select PL011_SERIAL 570 571config TARGET_BCM23550_W1D 572 bool "Support bcm23550_w1d" 573 select CPU_V7A 574 imply CRC32_VERIFY 575 imply FAT_WRITE 576 577config TARGET_BCM28155_AP 578 bool "Support bcm28155_ap" 579 select CPU_V7A 580 imply CRC32_VERIFY 581 imply FAT_WRITE 582 583config TARGET_BCMCYGNUS 584 bool "Support bcmcygnus" 585 select CPU_V7A 586 imply BCM_SF2_ETH 587 imply BCM_SF2_ETH_GMAC 588 imply CMD_HASH 589 imply CRC32_VERIFY 590 imply FAT_WRITE 591 imply HASH_VERIFY 592 imply NETDEVICES 593 594config TARGET_BCMNSP 595 bool "Support bcmnsp" 596 select CPU_V7A 597 598config TARGET_BCMNS2 599 bool "Support Broadcom Northstar2" 600 select ARM64 601 help 602 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 603 ARMv8 Cortex-A57 processors targeting a broad range of networking 604 applications 605 606config ARCH_EXYNOS 607 bool "Samsung EXYNOS" 608 select DM 609 select DM_GPIO 610 select DM_I2C 611 select DM_KEYBOARD 612 select DM_SERIAL 613 select DM_SPI 614 select DM_SPI_FLASH 615 select SPI 616 imply SYS_THUMB_BUILD 617 imply CMD_DM 618 imply FAT_WRITE 619 620config ARCH_S5PC1XX 621 bool "Samsung S5PC1XX" 622 select CPU_V7A 623 select DM 624 select DM_GPIO 625 select DM_I2C 626 select DM_SERIAL 627 imply CMD_DM 628 629config ARCH_HIGHBANK 630 bool "Calxeda Highbank" 631 select CPU_V7A 632 select PL011_SERIAL 633 634config ARCH_INTEGRATOR 635 bool "ARM Ltd. Integrator family" 636 select DM 637 select DM_SERIAL 638 select PL01X_SERIAL 639 imply CMD_DM 640 641config ARCH_KEYSTONE 642 bool "TI Keystone" 643 select CMD_POWEROFF 644 select CPU_V7A 645 select SUPPORT_SPL 646 select SYS_ARCH_TIMER 647 select SYS_THUMB_BUILD 648 imply CMD_MTDPARTS 649 imply CMD_SAVES 650 imply FIT 651 652config ARCH_K3 653 bool "Texas Instruments' K3 Architecture" 654 select SPL 655 select SUPPORT_SPL 656 select FIT 657 658config ARCH_OMAP2PLUS 659 bool "TI OMAP2+" 660 select CPU_V7A 661 select SPL_BOARD_INIT if SPL 662 select SPL_STACK_R if SPL 663 select SUPPORT_SPL 664 imply FIT 665 666config ARCH_MESON 667 bool "Amlogic Meson" 668 imply DISTRO_DEFAULTS 669 help 670 Support for the Meson SoC family developed by Amlogic Inc., 671 targeted at media players and tablet computers. We currently 672 support the S905 (GXBaby) 64-bit SoC. 673 674config ARCH_MEDIATEK 675 bool "MediaTek SoCs" 676 select BINMAN 677 select DM 678 select OF_CONTROL 679 select SPL_DM if SPL 680 select SPL_LIBCOMMON_SUPPORT if SPL 681 select SPL_LIBGENERIC_SUPPORT if SPL 682 select SPL_OF_CONTROL if SPL 683 select SUPPORT_SPL 684 help 685 Support for the MediaTek SoCs family developed by MediaTek Inc. 686 Please refer to doc/README.mediatek for more information. 687 688config ARCH_LPC32XX 689 bool "NXP LPC32xx platform" 690 select CPU_ARM926EJS 691 select DM 692 select DM_GPIO 693 select DM_SERIAL 694 select SPL_DM if SPL 695 select SUPPORT_SPL 696 imply CMD_DM 697 698config ARCH_IMX8 699 bool "NXP i.MX8 platform" 700 select ARM64 701 select DM 702 select OF_CONTROL 703 704config ARCH_IMX8M 705 bool "NXP i.MX8M platform" 706 select ARM64 707 select DM 708 select SUPPORT_SPL 709 imply CMD_DM 710 711config ARCH_MX23 712 bool "NXP i.MX23 family" 713 select CPU_ARM926EJS 714 select PL011_SERIAL 715 select SUPPORT_SPL 716 717config ARCH_MX25 718 bool "NXP MX25" 719 select CPU_ARM926EJS 720 imply MXC_GPIO 721 722config ARCH_MX28 723 bool "NXP i.MX28 family" 724 select CPU_ARM926EJS 725 select PL011_SERIAL 726 select SUPPORT_SPL 727 728config ARCH_MX31 729 bool "NXP i.MX31 family" 730 select CPU_ARM1136 731 732config ARCH_MX7ULP 733 bool "NXP MX7ULP" 734 select CPU_V7A 735 select ROM_UNIFIED_SECTIONS 736 imply MXC_GPIO 737 738config ARCH_MX7 739 bool "Freescale MX7" 740 select ARCH_MISC_INIT 741 select BOARD_EARLY_INIT_F 742 select CPU_V7A 743 select SYS_FSL_HAS_SEC if SECURE_BOOT 744 select SYS_FSL_SEC_COMPAT_4 745 select SYS_FSL_SEC_LE 746 imply MXC_GPIO 747 748config ARCH_MX6 749 bool "Freescale MX6" 750 select CPU_V7A 751 select SYS_FSL_HAS_SEC if SECURE_BOOT 752 select SYS_FSL_SEC_COMPAT_4 753 select SYS_FSL_SEC_LE 754 select SYS_THUMB_BUILD if SPL 755 imply MXC_GPIO 756 757if ARCH_MX6 758config SPL_LDSCRIPT 759 default "arch/arm/mach-omap2/u-boot-spl.lds" 760endif 761 762config ARCH_MX5 763 bool "Freescale MX5" 764 select BOARD_EARLY_INIT_F 765 select CPU_V7A 766 imply MXC_GPIO 767 768config ARCH_OWL 769 bool "Actions Semi OWL SoCs" 770 select ARM64 771 select DM 772 select DM_SERIAL 773 select OF_CONTROL 774 imply CMD_DM 775 776config ARCH_QEMU 777 bool "QEMU Virtual Platform" 778 select DM 779 select DM_SERIAL 780 select OF_CONTROL 781 select PL01X_SERIAL 782 imply CMD_DM 783 imply DM_RTC 784 imply RTC_PL031 785 786config ARCH_RMOBILE 787 bool "Renesas ARM SoCs" 788 select BOARD_EARLY_INIT_F 789 select DM 790 select DM_SERIAL 791 imply CMD_DM 792 imply FAT_WRITE 793 imply SYS_THUMB_BUILD 794 imply ARCH_MISC_INIT if DISPLAY_CPUINFO 795 796config TARGET_S32V234EVB 797 bool "Support s32v234evb" 798 select ARM64 799 select SYS_FSL_ERRATUM_ESDHC111 800 801config ARCH_SNAPDRAGON 802 bool "Qualcomm Snapdragon SoCs" 803 select ARM64 804 select DM 805 select DM_GPIO 806 select DM_SERIAL 807 select MSM_SMEM 808 select OF_CONTROL 809 select OF_SEPARATE 810 select SMEM 811 select SPMI 812 imply CMD_DM 813 814config ARCH_SOCFPGA 815 bool "Altera SOCFPGA family" 816 select ARCH_EARLY_INIT_R 817 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 818 select ARM64 if TARGET_SOCFPGA_STRATIX10 819 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 820 select DM 821 select DM_SERIAL 822 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 823 select OF_CONTROL 824 select SPL_DM_RESET if DM_RESET 825 select SPL_DM_SERIAL 826 select SPL_LIBCOMMON_SUPPORT 827 select SPL_LIBGENERIC_SUPPORT 828 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 829 select SPL_OF_CONTROL 830 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 831 select SPL_SERIAL_SUPPORT 832 select SPL_WATCHDOG_SUPPORT 833 select SUPPORT_SPL 834 select SYS_NS16550 835 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 836 imply CMD_DM 837 imply CMD_MTDPARTS 838 imply CRC32_VERIFY 839 imply DM_SPI 840 imply DM_SPI_FLASH 841 imply FAT_WRITE 842 imply SPL_LIBDISK_SUPPORT 843 imply SPL_MMC_SUPPORT 844 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 845 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 846 imply SPL_SPI_FLASH_SUPPORT 847 imply SPL_SPI_SUPPORT 848 849config ARCH_SUNXI 850 bool "Support sunxi (Allwinner) SoCs" 851 select BINMAN 852 select CMD_GPIO 853 select CMD_MMC if MMC 854 select CMD_USB if DISTRO_DEFAULTS 855 select CLK 856 select DM 857 select DM_ETH 858 select DM_GPIO 859 select DM_KEYBOARD 860 select DM_MMC if MMC 861 select DM_SERIAL 862 select DM_USB if DISTRO_DEFAULTS 863 select OF_BOARD_SETUP 864 select OF_CONTROL 865 select OF_SEPARATE 866 select SPECIFY_CONSOLE_INDEX 867 select SPL_STACK_R if SPL 868 select SPL_SYS_MALLOC_SIMPLE if SPL 869 select SPL_SYS_THUMB_BUILD if !ARM64 870 select SYS_NS16550 871 select SYS_THUMB_BUILD if !ARM64 872 select USB if DISTRO_DEFAULTS 873 select USB_KEYBOARD if DISTRO_DEFAULTS 874 select USB_STORAGE if DISTRO_DEFAULTS 875 select USE_TINY_PRINTF 876 imply CMD_DM 877 imply CMD_GPT 878 imply CMD_UBI if NAND 879 imply DISTRO_DEFAULTS 880 imply FAT_WRITE 881 imply FIT 882 imply OF_LIBFDT_OVERLAY 883 imply PRE_CONSOLE_BUFFER 884 imply SPL_GPIO_SUPPORT 885 imply SPL_LIBCOMMON_SUPPORT 886 imply SPL_LIBGENERIC_SUPPORT 887 imply SPL_MMC_SUPPORT if MMC 888 imply SPL_POWER_SUPPORT 889 imply SPL_SERIAL_SUPPORT 890 imply USB_GADGET 891 892config ARCH_VERSAL 893 bool "Support Xilinx Versal Platform" 894 select ARM64 895 select CLK 896 select DM 897 select DM_ETH if NET 898 select DM_MMC if MMC 899 select DM_SERIAL 900 select OF_CONTROL 901 902config ARCH_VF610 903 bool "Freescale Vybrid" 904 select CPU_V7A 905 select SYS_FSL_ERRATUM_ESDHC111 906 imply CMD_MTDPARTS 907 imply NAND 908 909config ARCH_ZYNQ 910 bool "Xilinx Zynq based platform" 911 select BOARD_EARLY_INIT_F if WDT 912 select CLK 913 select CLK_ZYNQ 914 select CPU_V7A 915 select DM 916 select DM_ETH if NET 917 select DM_MMC if MMC 918 select DM_SERIAL 919 select DM_SPI 920 select DM_SPI_FLASH 921 select DM_USB if USB 922 select OF_CONTROL 923 select SPI 924 select SPL_BOARD_INIT if SPL 925 select SPL_CLK if SPL 926 select SPL_DM if SPL 927 select SPL_OF_CONTROL if SPL 928 select SPL_SEPARATE_BSS if SPL 929 select SUPPORT_SPL 930 imply ARCH_EARLY_INIT_R 931 imply BOARD_LATE_INIT 932 imply CMD_CLK 933 imply CMD_DM 934 imply CMD_SPL 935 imply FAT_WRITE 936 937config ARCH_ZYNQMP_R5 938 bool "Xilinx ZynqMP R5 based platform" 939 select CLK 940 select CPU_V7R 941 select DM 942 select DM_ETH if NET 943 select DM_MMC if MMC 944 select DM_SERIAL 945 select OF_CONTROL 946 imply CMD_DM 947 imply DM_USB_GADGET 948 949config ARCH_ZYNQMP 950 bool "Xilinx ZynqMP based platform" 951 select ARM64 952 select CLK 953 select DM 954 select DM_ETH if NET 955 select DM_MMC if MMC 956 select DM_SERIAL 957 select DM_SPI if SPI 958 select DM_SPI_FLASH if DM_SPI 959 select DM_USB if USB 960 select OF_CONTROL 961 select SPL_BOARD_INIT if SPL 962 select SPL_CLK if SPL 963 select SPL_SEPARATE_BSS if SPL 964 select SUPPORT_SPL 965 imply BOARD_LATE_INIT 966 imply CMD_DM 967 imply FAT_WRITE 968 imply MP 969 imply DM_USB_GADGET 970 971config TEGRA 972 bool "NVIDIA Tegra" 973 imply DISTRO_DEFAULTS 974 imply FAT_WRITE 975 976config TARGET_VEXPRESS64_AEMV8A 977 bool "Support vexpress_aemv8a" 978 select ARM64 979 select PL01X_SERIAL 980 981config TARGET_VEXPRESS64_BASE_FVP 982 bool "Support Versatile Express ARMv8a FVP BASE model" 983 select ARM64 984 select PL01X_SERIAL 985 select SEMIHOSTING 986 987config TARGET_VEXPRESS64_BASE_FVP_DRAM 988 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 989 select ARM64 990 select PL01X_SERIAL 991 help 992 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 993 the default config to allow the user to load the images directly into 994 DRAM using model parameters rather than by using semi-hosting to load 995 the files from the host filesystem. 996 997config TARGET_VEXPRESS64_JUNO 998 bool "Support Versatile Express Juno Development Platform" 999 select ARM64 1000 select PL01X_SERIAL 1001 1002config TARGET_LS2080A_EMU 1003 bool "Support ls2080a_emu" 1004 select ARCH_LS2080A 1005 select ARCH_MISC_INIT 1006 select ARM64 1007 select ARMV8_MULTIENTRY 1008 help 1009 Support for Freescale LS2080A_EMU platform 1010 The LS2080A Development System (EMULATOR) is a pre silicon 1011 development platform that supports the QorIQ LS2080A 1012 Layerscape Architecture processor. 1013 1014config TARGET_LS2080A_SIMU 1015 bool "Support ls2080a_simu" 1016 select ARCH_LS2080A 1017 select ARCH_MISC_INIT 1018 select ARM64 1019 select ARMV8_MULTIENTRY 1020 help 1021 Support for Freescale LS2080A_SIMU platform 1022 The LS2080A Development System (QDS) is a pre silicon 1023 development platform that supports the QorIQ LS2080A 1024 Layerscape Architecture processor. 1025 1026config TARGET_LS1088AQDS 1027 bool "Support ls1088aqds" 1028 select ARCH_LS1088A 1029 select ARCH_MISC_INIT 1030 select ARM64 1031 select ARMV8_MULTIENTRY 1032 select BOARD_LATE_INIT 1033 select SUPPORT_SPL 1034 help 1035 Support for NXP LS1088AQDS platform 1036 The LS1088A Development System (QDS) is a high-performance 1037 development platform that supports the QorIQ LS1088A 1038 Layerscape Architecture processor. 1039 1040config TARGET_LS2080AQDS 1041 bool "Support ls2080aqds" 1042 select ARCH_LS2080A 1043 select ARCH_MISC_INIT 1044 select ARM64 1045 select ARMV8_MULTIENTRY 1046 select BOARD_LATE_INIT 1047 select SUPPORT_SPL 1048 imply SCSI 1049 imply SCSI_AHCI 1050 help 1051 Support for Freescale LS2080AQDS platform 1052 The LS2080A Development System (QDS) is a high-performance 1053 development platform that supports the QorIQ LS2080A 1054 Layerscape Architecture processor. 1055 1056config TARGET_LS2080ARDB 1057 bool "Support ls2080ardb" 1058 select ARCH_LS2080A 1059 select ARCH_MISC_INIT 1060 select ARM64 1061 select ARMV8_MULTIENTRY 1062 select BOARD_LATE_INIT 1063 select SUPPORT_SPL 1064 imply SCSI 1065 imply SCSI_AHCI 1066 help 1067 Support for Freescale LS2080ARDB platform. 1068 The LS2080A Reference design board (RDB) is a high-performance 1069 development platform that supports the QorIQ LS2080A 1070 Layerscape Architecture processor. 1071 1072config TARGET_LS2081ARDB 1073 bool "Support ls2081ardb" 1074 select ARCH_LS2080A 1075 select ARCH_MISC_INIT 1076 select ARM64 1077 select ARMV8_MULTIENTRY 1078 select BOARD_LATE_INIT 1079 select SUPPORT_SPL 1080 help 1081 Support for Freescale LS2081ARDB platform. 1082 The LS2081A Reference design board (RDB) is a high-performance 1083 development platform that supports the QorIQ LS2081A/LS2041A 1084 Layerscape Architecture processor. 1085 1086config TARGET_LX2160ARDB 1087 bool "Support lx2160ardb" 1088 select ARCH_LX2160A 1089 select ARCH_MISC_INIT 1090 select ARM64 1091 select ARMV8_MULTIENTRY 1092 select BOARD_LATE_INIT 1093 help 1094 Support for NXP LX2160ARDB platform. 1095 The lx2160ardb (LX2160A Reference design board (RDB) 1096 is a high-performance development platform that supports the 1097 QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor. 1098 1099config TARGET_HIKEY 1100 bool "Support HiKey 96boards Consumer Edition Platform" 1101 select ARM64 1102 select DM 1103 select DM_GPIO 1104 select DM_SERIAL 1105 select OF_CONTROL 1106 select PL01X_SERIAL 1107 select SPECIFY_CONSOLE_INDEX 1108 imply CMD_DM 1109 help 1110 Support for HiKey 96boards platform. It features a HI6220 1111 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1112 1113config TARGET_POPLAR 1114 bool "Support Poplar 96boards Enterprise Edition Platform" 1115 select ARM64 1116 select DM 1117 select DM_SERIAL 1118 select DM_USB 1119 select OF_CONTROL 1120 select PL01X_SERIAL 1121 imply CMD_DM 1122 help 1123 Support for Poplar 96boards EE platform. It features a HI3798cv200 1124 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1125 making it capable of running any commercial set-top solution based on 1126 Linux or Android. 1127 1128config TARGET_LS1012AQDS 1129 bool "Support ls1012aqds" 1130 select ARCH_LS1012A 1131 select ARM64 1132 select BOARD_LATE_INIT 1133 help 1134 Support for Freescale LS1012AQDS platform. 1135 The LS1012A Development System (QDS) is a high-performance 1136 development platform that supports the QorIQ LS1012A 1137 Layerscape Architecture processor. 1138 1139config TARGET_LS1012ARDB 1140 bool "Support ls1012ardb" 1141 select ARCH_LS1012A 1142 select ARM64 1143 select BOARD_LATE_INIT 1144 imply SCSI 1145 imply SCSI_AHCI 1146 help 1147 Support for Freescale LS1012ARDB platform. 1148 The LS1012A Reference design board (RDB) is a high-performance 1149 development platform that supports the QorIQ LS1012A 1150 Layerscape Architecture processor. 1151 1152config TARGET_LS1012A2G5RDB 1153 bool "Support ls1012a2g5rdb" 1154 select ARCH_LS1012A 1155 select ARM64 1156 select BOARD_LATE_INIT 1157 imply SCSI 1158 help 1159 Support for Freescale LS1012A2G5RDB platform. 1160 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1161 development platform that supports the QorIQ LS1012A 1162 Layerscape Architecture processor. 1163 1164config TARGET_LS1012AFRWY 1165 bool "Support ls1012afrwy" 1166 select ARCH_LS1012A 1167 select ARM64 1168 select BOARD_LATE_INIT 1169 imply SCSI 1170 imply SCSI_AHCI 1171 help 1172 Support for Freescale LS1012AFRWY platform. 1173 The LS1012A FRWY board (FRWY) is a high-performance 1174 development platform that supports the QorIQ LS1012A 1175 Layerscape Architecture processor. 1176 1177config TARGET_LS1012AFRDM 1178 bool "Support ls1012afrdm" 1179 select ARCH_LS1012A 1180 select ARM64 1181 help 1182 Support for Freescale LS1012AFRDM platform. 1183 The LS1012A Freedom board (FRDM) is a high-performance 1184 development platform that supports the QorIQ LS1012A 1185 Layerscape Architecture processor. 1186 1187config TARGET_LS1088ARDB 1188 bool "Support ls1088ardb" 1189 select ARCH_LS1088A 1190 select ARCH_MISC_INIT 1191 select ARM64 1192 select ARMV8_MULTIENTRY 1193 select BOARD_LATE_INIT 1194 select SUPPORT_SPL 1195 help 1196 Support for NXP LS1088ARDB platform. 1197 The LS1088A Reference design board (RDB) is a high-performance 1198 development platform that supports the QorIQ LS1088A 1199 Layerscape Architecture processor. 1200 1201config TARGET_LS1021AQDS 1202 bool "Support ls1021aqds" 1203 select ARCH_LS1021A 1204 select ARCH_SUPPORT_PSCI 1205 select BOARD_EARLY_INIT_F 1206 select BOARD_LATE_INIT 1207 select CPU_V7A 1208 select CPU_V7_HAS_NONSEC 1209 select CPU_V7_HAS_VIRT 1210 select LS1_DEEP_SLEEP 1211 select SUPPORT_SPL 1212 select SYS_FSL_DDR 1213 imply SCSI 1214 1215config TARGET_LS1021ATWR 1216 bool "Support ls1021atwr" 1217 select ARCH_LS1021A 1218 select ARCH_SUPPORT_PSCI 1219 select BOARD_EARLY_INIT_F 1220 select BOARD_LATE_INIT 1221 select CPU_V7A 1222 select CPU_V7_HAS_NONSEC 1223 select CPU_V7_HAS_VIRT 1224 select LS1_DEEP_SLEEP 1225 select SUPPORT_SPL 1226 imply SCSI 1227 1228config TARGET_LS1021AIOT 1229 bool "Support ls1021aiot" 1230 select ARCH_LS1021A 1231 select ARCH_SUPPORT_PSCI 1232 select BOARD_LATE_INIT 1233 select CPU_V7A 1234 select CPU_V7_HAS_NONSEC 1235 select CPU_V7_HAS_VIRT 1236 select SUPPORT_SPL 1237 imply SCSI 1238 help 1239 Support for Freescale LS1021AIOT platform. 1240 The LS1021A Freescale board (IOT) is a high-performance 1241 development platform that supports the QorIQ LS1021A 1242 Layerscape Architecture processor. 1243 1244config TARGET_LS1043AQDS 1245 bool "Support ls1043aqds" 1246 select ARCH_LS1043A 1247 select ARM64 1248 select ARMV8_MULTIENTRY 1249 select BOARD_EARLY_INIT_F 1250 select BOARD_LATE_INIT 1251 select SUPPORT_SPL 1252 imply SCSI 1253 help 1254 Support for Freescale LS1043AQDS platform. 1255 1256config TARGET_LS1043ARDB 1257 bool "Support ls1043ardb" 1258 select ARCH_LS1043A 1259 select ARM64 1260 select ARMV8_MULTIENTRY 1261 select BOARD_EARLY_INIT_F 1262 select BOARD_LATE_INIT 1263 select SUPPORT_SPL 1264 imply SCSI 1265 help 1266 Support for Freescale LS1043ARDB platform. 1267 1268config TARGET_LS1046AQDS 1269 bool "Support ls1046aqds" 1270 select ARCH_LS1046A 1271 select ARM64 1272 select ARMV8_MULTIENTRY 1273 select BOARD_EARLY_INIT_F 1274 select BOARD_LATE_INIT 1275 select DM_SPI_FLASH if DM_SPI 1276 select SUPPORT_SPL 1277 imply SCSI 1278 help 1279 Support for Freescale LS1046AQDS platform. 1280 The LS1046A Development System (QDS) is a high-performance 1281 development platform that supports the QorIQ LS1046A 1282 Layerscape Architecture processor. 1283 1284config TARGET_LS1046ARDB 1285 bool "Support ls1046ardb" 1286 select ARCH_LS1046A 1287 select ARM64 1288 select ARMV8_MULTIENTRY 1289 select BOARD_EARLY_INIT_F 1290 select BOARD_LATE_INIT 1291 select DM_SPI_FLASH if DM_SPI 1292 select POWER_MC34VR500 1293 select SUPPORT_SPL 1294 imply SCSI 1295 help 1296 Support for Freescale LS1046ARDB platform. 1297 The LS1046A Reference Design Board (RDB) is a high-performance 1298 development platform that supports the QorIQ LS1046A 1299 Layerscape Architecture processor. 1300 1301config TARGET_H2200 1302 bool "Support h2200" 1303 select CPU_PXA 1304 1305config TARGET_ZIPITZ2 1306 bool "Support zipitz2" 1307 select CPU_PXA 1308 1309config TARGET_COLIBRI_PXA270 1310 bool "Support colibri_pxa270" 1311 select CPU_PXA 1312 1313config ARCH_UNIPHIER 1314 bool "Socionext UniPhier SoCs" 1315 select BOARD_LATE_INIT 1316 select DM 1317 select DM_GPIO 1318 select DM_I2C 1319 select DM_MMC 1320 select DM_RESET 1321 select DM_SERIAL 1322 select DM_USB 1323 select OF_BOARD_SETUP 1324 select OF_CONTROL 1325 select OF_LIBFDT 1326 select PINCTRL 1327 select SPL_BOARD_INIT if SPL 1328 select SPL_DM if SPL 1329 select SPL_LIBCOMMON_SUPPORT if SPL 1330 select SPL_LIBGENERIC_SUPPORT if SPL 1331 select SPL_OF_CONTROL if SPL 1332 select SPL_PINCTRL if SPL 1333 select SUPPORT_SPL 1334 imply CMD_DM 1335 imply DISTRO_DEFAULTS 1336 imply FAT_WRITE 1337 help 1338 Support for UniPhier SoC family developed by Socionext Inc. 1339 (formerly, System LSI Business Division of Panasonic Corporation) 1340 1341config STM32 1342 bool "Support STMicroelectronics STM32 MCU with cortex M" 1343 select CPU_V7M 1344 select DM 1345 select DM_SERIAL 1346 imply CMD_DM 1347 1348config ARCH_STI 1349 bool "Support STMicrolectronics SoCs" 1350 select BLK 1351 select CPU_V7A 1352 select DM 1353 select DM_MMC 1354 select DM_RESET 1355 select DM_SERIAL 1356 imply CMD_DM 1357 help 1358 Support for STMicroelectronics STiH407/10 SoC family. 1359 This SoC is used on Linaro 96Board STiH410-B2260 1360 1361config ARCH_STM32MP 1362 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1363 select ARCH_MISC_INIT 1364 select BOARD_LATE_INIT 1365 select CLK 1366 select DM 1367 select DM_GPIO 1368 select DM_RESET 1369 select DM_SERIAL 1370 select MISC 1371 select OF_CONTROL 1372 select OF_LIBFDT 1373 select PINCTRL 1374 select REGMAP 1375 select SUPPORT_SPL 1376 select SYSCON 1377 select SYSRESET 1378 select SYS_THUMB_BUILD 1379 imply CMD_DM 1380 help 1381 Support for STM32MP SoC family developed by STMicroelectronics, 1382 MPUs based on ARM cortex A core 1383 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1384 BootLoader (FSBL) 1385 1386config ARCH_ROCKCHIP 1387 bool "Support Rockchip SoCs" 1388 select BLK 1389 select DM 1390 select DM_GPIO 1391 select DM_I2C 1392 select DM_MMC 1393 select DM_PWM 1394 select DM_REGULATOR 1395 select DM_SERIAL 1396 select DM_SPI 1397 select DM_SPI_FLASH 1398 select DM_USB if USB 1399 select ENABLE_ARM_SOC_BOOT0_HOOK 1400 select OF_CONTROL 1401 select SPI 1402 select SPL_DM if SPL 1403 select SPL_SYS_MALLOC_SIMPLE if SPL 1404 select SYS_MALLOC_F 1405 select SYS_THUMB_BUILD if !ARM64 1406 imply ADC 1407 imply CMD_DM 1408 imply DISTRO_DEFAULTS 1409 imply FAT_WRITE 1410 imply SARADC_ROCKCHIP 1411 imply SPL_SYSRESET 1412 imply SYS_NS16550 1413 imply TPL_SYSRESET 1414 imply USB_FUNCTION_FASTBOOT 1415 1416config TARGET_THUNDERX_88XX 1417 bool "Support ThunderX 88xx" 1418 select ARM64 1419 select OF_CONTROL 1420 select PL01X_SERIAL 1421 select SYS_CACHE_SHIFT_7 1422 1423config ARCH_ASPEED 1424 bool "Support Aspeed SoCs" 1425 select DM 1426 select OF_CONTROL 1427 imply CMD_DM 1428 1429endchoice 1430 1431config TI_SECURE_DEVICE 1432 bool "HS Device Type Support" 1433 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1434 help 1435 If a high secure (HS) device type is being used, this config 1436 must be set. This option impacts various aspects of the 1437 build system (to create signed boot images that can be 1438 authenticated) and the code. See the doc/README.ti-secure 1439 file for further details. 1440 1441source "arch/arm/mach-aspeed/Kconfig" 1442 1443source "arch/arm/mach-at91/Kconfig" 1444 1445source "arch/arm/mach-bcm283x/Kconfig" 1446 1447source "arch/arm/mach-bcmstb/Kconfig" 1448 1449source "arch/arm/mach-davinci/Kconfig" 1450 1451source "arch/arm/mach-exynos/Kconfig" 1452 1453source "arch/arm/mach-highbank/Kconfig" 1454 1455source "arch/arm/mach-integrator/Kconfig" 1456 1457source "arch/arm/mach-k3/Kconfig" 1458 1459source "arch/arm/mach-keystone/Kconfig" 1460 1461source "arch/arm/mach-kirkwood/Kconfig" 1462 1463source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1464 1465source "arch/arm/mach-mvebu/Kconfig" 1466 1467source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1468 1469source "arch/arm/mach-imx/mx2/Kconfig" 1470 1471source "arch/arm/mach-imx/mx3/Kconfig" 1472 1473source "arch/arm/mach-imx/mx5/Kconfig" 1474 1475source "arch/arm/mach-imx/mx6/Kconfig" 1476 1477source "arch/arm/mach-imx/mx7/Kconfig" 1478 1479source "arch/arm/mach-imx/mx7ulp/Kconfig" 1480 1481source "arch/arm/mach-imx/imx8/Kconfig" 1482 1483source "arch/arm/mach-imx/imx8m/Kconfig" 1484 1485source "arch/arm/mach-imx/mxs/Kconfig" 1486 1487source "arch/arm/mach-omap2/Kconfig" 1488 1489source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1490 1491source "arch/arm/mach-orion5x/Kconfig" 1492 1493source "arch/arm/mach-owl/Kconfig" 1494 1495source "arch/arm/mach-rmobile/Kconfig" 1496 1497source "arch/arm/mach-meson/Kconfig" 1498 1499source "arch/arm/mach-mediatek/Kconfig" 1500 1501source "arch/arm/mach-qemu/Kconfig" 1502 1503source "arch/arm/mach-rockchip/Kconfig" 1504 1505source "arch/arm/mach-s5pc1xx/Kconfig" 1506 1507source "arch/arm/mach-snapdragon/Kconfig" 1508 1509source "arch/arm/mach-socfpga/Kconfig" 1510 1511source "arch/arm/mach-sti/Kconfig" 1512 1513source "arch/arm/mach-stm32/Kconfig" 1514 1515source "arch/arm/mach-stm32mp/Kconfig" 1516 1517source "arch/arm/mach-sunxi/Kconfig" 1518 1519source "arch/arm/mach-tegra/Kconfig" 1520 1521source "arch/arm/mach-uniphier/Kconfig" 1522 1523source "arch/arm/cpu/armv7/vf610/Kconfig" 1524 1525source "arch/arm/mach-zynq/Kconfig" 1526 1527source "arch/arm/mach-zynqmp/Kconfig" 1528 1529source "arch/arm/mach-versal/Kconfig" 1530 1531source "arch/arm/mach-zynqmp-r5/Kconfig" 1532 1533source "arch/arm/cpu/armv7/Kconfig" 1534 1535source "arch/arm/cpu/armv8/Kconfig" 1536 1537source "arch/arm/mach-imx/Kconfig" 1538 1539source "board/bosch/shc/Kconfig" 1540source "board/CarMediaLab/flea3/Kconfig" 1541source "board/Marvell/aspenite/Kconfig" 1542source "board/Marvell/gplugd/Kconfig" 1543source "board/armadeus/apf27/Kconfig" 1544source "board/armltd/vexpress/Kconfig" 1545source "board/armltd/vexpress64/Kconfig" 1546source "board/broadcom/bcm23550_w1d/Kconfig" 1547source "board/broadcom/bcm28155_ap/Kconfig" 1548source "board/broadcom/bcm963158/Kconfig" 1549source "board/broadcom/bcm968580xref/Kconfig" 1550source "board/broadcom/bcmcygnus/Kconfig" 1551source "board/broadcom/bcmnsp/Kconfig" 1552source "board/broadcom/bcmns2/Kconfig" 1553source "board/cavium/thunderx/Kconfig" 1554source "board/cirrus/edb93xx/Kconfig" 1555source "board/eets/pdu001/Kconfig" 1556source "board/emulation/qemu-arm/Kconfig" 1557source "board/freescale/ls2080a/Kconfig" 1558source "board/freescale/ls2080aqds/Kconfig" 1559source "board/freescale/ls2080ardb/Kconfig" 1560source "board/freescale/ls1088a/Kconfig" 1561source "board/freescale/ls1021aqds/Kconfig" 1562source "board/freescale/ls1043aqds/Kconfig" 1563source "board/freescale/ls1021atwr/Kconfig" 1564source "board/freescale/ls1021aiot/Kconfig" 1565source "board/freescale/ls1046aqds/Kconfig" 1566source "board/freescale/ls1043ardb/Kconfig" 1567source "board/freescale/ls1046ardb/Kconfig" 1568source "board/freescale/ls1012aqds/Kconfig" 1569source "board/freescale/ls1012ardb/Kconfig" 1570source "board/freescale/ls1012afrdm/Kconfig" 1571source "board/freescale/lx2160a/Kconfig" 1572source "board/freescale/mx35pdk/Kconfig" 1573source "board/freescale/s32v234evb/Kconfig" 1574source "board/grinn/chiliboard/Kconfig" 1575source "board/gumstix/pepper/Kconfig" 1576source "board/h2200/Kconfig" 1577source "board/hisilicon/hikey/Kconfig" 1578source "board/hisilicon/poplar/Kconfig" 1579source "board/isee/igep003x/Kconfig" 1580source "board/phytec/pcm051/Kconfig" 1581source "board/silica/pengwyn/Kconfig" 1582source "board/spear/spear300/Kconfig" 1583source "board/spear/spear310/Kconfig" 1584source "board/spear/spear320/Kconfig" 1585source "board/spear/spear600/Kconfig" 1586source "board/spear/x600/Kconfig" 1587source "board/st/stv0991/Kconfig" 1588source "board/tcl/sl50/Kconfig" 1589source "board/ucRobotics/bubblegum_96/Kconfig" 1590source "board/birdland/bav335x/Kconfig" 1591source "board/toradex/colibri_pxa270/Kconfig" 1592source "board/vscom/baltos/Kconfig" 1593source "board/woodburn/Kconfig" 1594source "board/xilinx/Kconfig" 1595source "board/xilinx/zynq/Kconfig" 1596source "board/xilinx/zynqmp/Kconfig" 1597source "board/zipitz2/Kconfig" 1598 1599source "arch/arm/Kconfig.debug" 1600 1601endmenu 1602 1603config SPL_LDSCRIPT 1604 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1605 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1606 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1607 1608 1609