1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config TARGET_VEXPRESS_CA15_TC2 532 bool "Support vexpress_ca15_tc2" 533 select CPU_V7A 534 select CPU_V7_HAS_NONSEC 535 select CPU_V7_HAS_VIRT 536 select PL011_SERIAL 537 538config ARCH_BCMSTB 539 bool "Broadcom BCM7XXX family" 540 select CPU_V7A 541 select DM 542 select OF_CONTROL 543 select OF_PRIOR_STAGE 544 imply CMD_DM 545 help 546 This enables support for Broadcom ARM-based set-top box 547 chipsets, including the 7445 family of chips. 548 549config TARGET_VEXPRESS_CA5X2 550 bool "Support vexpress_ca5x2" 551 select CPU_V7A 552 select PL011_SERIAL 553 554config TARGET_VEXPRESS_CA9X4 555 bool "Support vexpress_ca9x4" 556 select CPU_V7A 557 select PL011_SERIAL 558 559config TARGET_BCM23550_W1D 560 bool "Support bcm23550_w1d" 561 select CPU_V7A 562 imply CRC32_VERIFY 563 imply FAT_WRITE 564 565config TARGET_BCM28155_AP 566 bool "Support bcm28155_ap" 567 select CPU_V7A 568 imply CRC32_VERIFY 569 imply FAT_WRITE 570 571config TARGET_BCMCYGNUS 572 bool "Support bcmcygnus" 573 select CPU_V7A 574 imply BCM_SF2_ETH 575 imply BCM_SF2_ETH_GMAC 576 imply CMD_HASH 577 imply CRC32_VERIFY 578 imply FAT_WRITE 579 imply HASH_VERIFY 580 imply NETDEVICES 581 582config TARGET_BCMNSP 583 bool "Support bcmnsp" 584 select CPU_V7A 585 586config TARGET_BCMNS2 587 bool "Support Broadcom Northstar2" 588 select ARM64 589 help 590 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 591 ARMv8 Cortex-A57 processors targeting a broad range of networking 592 applications 593 594config ARCH_EXYNOS 595 bool "Samsung EXYNOS" 596 select DM 597 select DM_GPIO 598 select DM_I2C 599 select DM_KEYBOARD 600 select DM_SERIAL 601 select DM_SPI 602 select DM_SPI_FLASH 603 select SPI 604 imply CMD_DM 605 imply FAT_WRITE 606 607config ARCH_S5PC1XX 608 bool "Samsung S5PC1XX" 609 select CPU_V7A 610 select DM 611 select DM_GPIO 612 select DM_I2C 613 select DM_SERIAL 614 imply CMD_DM 615 616config ARCH_HIGHBANK 617 bool "Calxeda Highbank" 618 select CPU_V7A 619 select PL011_SERIAL 620 621config ARCH_INTEGRATOR 622 bool "ARM Ltd. Integrator family" 623 select DM 624 select DM_SERIAL 625 select PL01X_SERIAL 626 imply CMD_DM 627 628config ARCH_KEYSTONE 629 bool "TI Keystone" 630 select CMD_POWEROFF 631 select CPU_V7A 632 select SUPPORT_SPL 633 select SYS_ARCH_TIMER 634 select SYS_THUMB_BUILD 635 imply CMD_MTDPARTS 636 imply CMD_SAVES 637 imply FIT 638 639config ARCH_K3 640 bool "Texas Instruments' K3 Architecture" 641 select SPL 642 select SUPPORT_SPL 643 select FIT 644 645config ARCH_OMAP2PLUS 646 bool "TI OMAP2+" 647 select CPU_V7A 648 select SPL_BOARD_INIT if SPL 649 select SPL_STACK_R if SPL 650 select SUPPORT_SPL 651 imply FIT 652 653config ARCH_MESON 654 bool "Amlogic Meson" 655 imply DISTRO_DEFAULTS 656 help 657 Support for the Meson SoC family developed by Amlogic Inc., 658 targeted at media players and tablet computers. We currently 659 support the S905 (GXBaby) 64-bit SoC. 660 661config ARCH_LPC32XX 662 bool "NXP LPC32xx platform" 663 select CPU_ARM926EJS 664 select DM 665 select DM_GPIO 666 select DM_SERIAL 667 select SPL_DM if SPL 668 select SUPPORT_SPL 669 imply CMD_DM 670 671config ARCH_IMX8 672 bool "NXP i.MX8 platform" 673 select ARM64 674 select DM 675 select OF_CONTROL 676 677config ARCH_MX8M 678 bool "NXP i.MX8M platform" 679 select ARM64 680 select DM 681 select SUPPORT_SPL 682 imply CMD_DM 683 684config ARCH_MX23 685 bool "NXP i.MX23 family" 686 select CPU_ARM926EJS 687 select PL011_SERIAL 688 select SUPPORT_SPL 689 690config ARCH_MX25 691 bool "NXP MX25" 692 select CPU_ARM926EJS 693 imply MXC_GPIO 694 695config ARCH_MX28 696 bool "NXP i.MX28 family" 697 select CPU_ARM926EJS 698 select PL011_SERIAL 699 select SUPPORT_SPL 700 701config ARCH_MX31 702 bool "NXP i.MX31 family" 703 select CPU_ARM1136 704 705config ARCH_MX7ULP 706 bool "NXP MX7ULP" 707 select CPU_V7A 708 select ROM_UNIFIED_SECTIONS 709 imply MXC_GPIO 710 711config ARCH_MX7 712 bool "Freescale MX7" 713 select ARCH_MISC_INIT 714 select BOARD_EARLY_INIT_F 715 select CPU_V7A 716 select SYS_FSL_HAS_SEC if SECURE_BOOT 717 select SYS_FSL_SEC_COMPAT_4 718 select SYS_FSL_SEC_LE 719 imply MXC_GPIO 720 721config ARCH_MX6 722 bool "Freescale MX6" 723 select CPU_V7A 724 select SYS_FSL_HAS_SEC if SECURE_BOOT 725 select SYS_FSL_SEC_COMPAT_4 726 select SYS_FSL_SEC_LE 727 select SYS_THUMB_BUILD if SPL 728 imply MXC_GPIO 729 730if ARCH_MX6 731config SPL_LDSCRIPT 732 default "arch/arm/mach-omap2/u-boot-spl.lds" 733endif 734 735config ARCH_MX5 736 bool "Freescale MX5" 737 select BOARD_EARLY_INIT_F 738 select CPU_V7A 739 imply MXC_GPIO 740 741config ARCH_OWL 742 bool "Actions Semi OWL SoCs" 743 select ARM64 744 select DM 745 select DM_SERIAL 746 select OF_CONTROL 747 imply CMD_DM 748 749config ARCH_QEMU 750 bool "QEMU Virtual Platform" 751 select DM 752 select DM_SERIAL 753 select OF_CONTROL 754 select PL01X_SERIAL 755 imply CMD_DM 756 imply DM_RTC 757 imply RTC_PL031 758 759config ARCH_RMOBILE 760 bool "Renesas ARM SoCs" 761 select BOARD_EARLY_INIT_F 762 select DM 763 select DM_SERIAL 764 imply CMD_DM 765 imply FAT_WRITE 766 imply SYS_THUMB_BUILD 767 768config TARGET_S32V234EVB 769 bool "Support s32v234evb" 770 select ARM64 771 select SYS_FSL_ERRATUM_ESDHC111 772 773config ARCH_SNAPDRAGON 774 bool "Qualcomm Snapdragon SoCs" 775 select ARM64 776 select DM 777 select DM_GPIO 778 select DM_SERIAL 779 select MSM_SMEM 780 select OF_CONTROL 781 select OF_SEPARATE 782 select SMEM 783 select SPMI 784 imply CMD_DM 785 786config ARCH_SOCFPGA 787 bool "Altera SOCFPGA family" 788 select ARCH_EARLY_INIT_R 789 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 790 select ARM64 if TARGET_SOCFPGA_STRATIX10 791 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 792 select DM 793 select DM_SERIAL 794 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 795 select OF_CONTROL 796 select SPL_DM_RESET if DM_RESET 797 select SPL_DM_SERIAL 798 select SPL_LIBCOMMON_SUPPORT 799 select SPL_LIBDISK_SUPPORT 800 select SPL_LIBGENERIC_SUPPORT 801 select SPL_MMC_SUPPORT if DM_MMC 802 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 803 select SPL_OF_CONTROL 804 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 805 select SPL_SERIAL_SUPPORT 806 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 807 select SPL_SPI_SUPPORT if DM_SPI 808 select SPL_WATCHDOG_SUPPORT 809 select SUPPORT_SPL 810 select SYS_NS16550 811 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 812 imply CMD_DM 813 imply CMD_MTDPARTS 814 imply CRC32_VERIFY 815 imply DM_SPI 816 imply DM_SPI_FLASH 817 imply FAT_WRITE 818 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 819 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 820 821config ARCH_SUNXI 822 bool "Support sunxi (Allwinner) SoCs" 823 select BINMAN 824 select CMD_GPIO 825 select CMD_MMC if MMC 826 select CMD_USB if DISTRO_DEFAULTS 827 select DM 828 select DM_ETH 829 select DM_GPIO 830 select DM_KEYBOARD 831 select DM_SERIAL 832 select DM_USB if DISTRO_DEFAULTS 833 select OF_BOARD_SETUP 834 select OF_CONTROL 835 select OF_SEPARATE 836 select SPECIFY_CONSOLE_INDEX 837 select SPL_STACK_R if SPL 838 select SPL_SYS_MALLOC_SIMPLE if SPL 839 select SPL_SYS_THUMB_BUILD if !ARM64 840 select SYS_NS16550 841 select SYS_THUMB_BUILD if !ARM64 842 select USB if DISTRO_DEFAULTS 843 select USB_KEYBOARD if DISTRO_DEFAULTS 844 select USB_STORAGE if DISTRO_DEFAULTS 845 select USE_TINY_PRINTF 846 imply CMD_DM 847 imply CMD_GPT 848 imply CMD_UBI if NAND 849 imply DISTRO_DEFAULTS 850 imply FAT_WRITE 851 imply OF_LIBFDT_OVERLAY 852 imply PRE_CONSOLE_BUFFER 853 imply SPL_GPIO_SUPPORT 854 imply SPL_LIBCOMMON_SUPPORT 855 imply SPL_LIBDISK_SUPPORT 856 imply SPL_LIBGENERIC_SUPPORT 857 imply SPL_MMC_SUPPORT if MMC 858 imply SPL_POWER_SUPPORT 859 imply SPL_SERIAL_SUPPORT 860 imply USB_GADGET 861 862config ARCH_VERSAL 863 bool "Support Xilinx Versal Platform" 864 select ARM64 865 select CLK 866 select DM 867 select DM_SERIAL 868 select OF_CONTROL 869 870config ARCH_VF610 871 bool "Freescale Vybrid" 872 select CPU_V7A 873 select SYS_FSL_ERRATUM_ESDHC111 874 imply CMD_MTDPARTS 875 imply NAND 876 877config ARCH_ZYNQ 878 bool "Xilinx Zynq based platform" 879 select BOARD_EARLY_INIT_F if WDT 880 select CLK 881 select CLK_ZYNQ 882 select CPU_V7A 883 select DM 884 select DM_ETH if NET 885 select DM_MMC if MMC 886 select DM_SERIAL 887 select DM_SPI 888 select DM_SPI_FLASH 889 select DM_USB if USB 890 select OF_CONTROL 891 select SPI 892 select SPL_BOARD_INIT if SPL 893 select SPL_CLK if SPL 894 select SPL_DM if SPL 895 select SPL_OF_CONTROL if SPL 896 select SPL_SEPARATE_BSS if SPL 897 select SUPPORT_SPL 898 imply ARCH_EARLY_INIT_R 899 imply BOARD_LATE_INIT 900 imply CMD_CLK 901 imply CMD_DM 902 imply CMD_SPL 903 imply FAT_WRITE 904 905config ARCH_ZYNQMP_R5 906 bool "Xilinx ZynqMP R5 based platform" 907 select CLK 908 select CPU_V7R 909 select DM 910 select DM_SERIAL 911 select OF_CONTROL 912 imply CMD_DM 913 914config ARCH_ZYNQMP 915 bool "Xilinx ZynqMP based platform" 916 select ARM64 917 select CLK 918 select DM 919 select DM_SERIAL 920 select DM_USB if USB 921 select OF_CONTROL 922 select SPL_BOARD_INIT if SPL 923 select SPL_CLK if SPL 924 select SUPPORT_SPL 925 imply BOARD_LATE_INIT 926 imply CMD_DM 927 imply FAT_WRITE 928 imply MP 929 930config TEGRA 931 bool "NVIDIA Tegra" 932 imply DISTRO_DEFAULTS 933 imply FAT_WRITE 934 935config TARGET_VEXPRESS64_AEMV8A 936 bool "Support vexpress_aemv8a" 937 select ARM64 938 select PL01X_SERIAL 939 940config TARGET_VEXPRESS64_BASE_FVP 941 bool "Support Versatile Express ARMv8a FVP BASE model" 942 select ARM64 943 select PL01X_SERIAL 944 select SEMIHOSTING 945 946config TARGET_VEXPRESS64_BASE_FVP_DRAM 947 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 948 select ARM64 949 select PL01X_SERIAL 950 help 951 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 952 the default config to allow the user to load the images directly into 953 DRAM using model parameters rather than by using semi-hosting to load 954 the files from the host filesystem. 955 956config TARGET_VEXPRESS64_JUNO 957 bool "Support Versatile Express Juno Development Platform" 958 select ARM64 959 select PL01X_SERIAL 960 961config TARGET_LS2080A_EMU 962 bool "Support ls2080a_emu" 963 select ARCH_LS2080A 964 select ARCH_MISC_INIT 965 select ARM64 966 select ARMV8_MULTIENTRY 967 help 968 Support for Freescale LS2080A_EMU platform 969 The LS2080A Development System (EMULATOR) is a pre silicon 970 development platform that supports the QorIQ LS2080A 971 Layerscape Architecture processor. 972 973config TARGET_LS2080A_SIMU 974 bool "Support ls2080a_simu" 975 select ARCH_LS2080A 976 select ARCH_MISC_INIT 977 select ARM64 978 select ARMV8_MULTIENTRY 979 help 980 Support for Freescale LS2080A_SIMU platform 981 The LS2080A Development System (QDS) is a pre silicon 982 development platform that supports the QorIQ LS2080A 983 Layerscape Architecture processor. 984 985config TARGET_LS1088AQDS 986 bool "Support ls1088aqds" 987 select ARCH_LS1088A 988 select ARCH_MISC_INIT 989 select ARM64 990 select ARMV8_MULTIENTRY 991 select BOARD_LATE_INIT 992 select SUPPORT_SPL 993 help 994 Support for NXP LS1088AQDS platform 995 The LS1088A Development System (QDS) is a high-performance 996 development platform that supports the QorIQ LS1088A 997 Layerscape Architecture processor. 998 999config TARGET_LS2080AQDS 1000 bool "Support ls2080aqds" 1001 select ARCH_LS2080A 1002 select ARCH_MISC_INIT 1003 select ARM64 1004 select ARMV8_MULTIENTRY 1005 select BOARD_LATE_INIT 1006 select SUPPORT_SPL 1007 imply SCSI 1008 imply SCSI_AHCI 1009 help 1010 Support for Freescale LS2080AQDS platform 1011 The LS2080A Development System (QDS) is a high-performance 1012 development platform that supports the QorIQ LS2080A 1013 Layerscape Architecture processor. 1014 1015config TARGET_LS2080ARDB 1016 bool "Support ls2080ardb" 1017 select ARCH_LS2080A 1018 select ARCH_MISC_INIT 1019 select ARM64 1020 select ARMV8_MULTIENTRY 1021 select BOARD_LATE_INIT 1022 select SUPPORT_SPL 1023 imply SCSI 1024 imply SCSI_AHCI 1025 help 1026 Support for Freescale LS2080ARDB platform. 1027 The LS2080A Reference design board (RDB) is a high-performance 1028 development platform that supports the QorIQ LS2080A 1029 Layerscape Architecture processor. 1030 1031config TARGET_LS2081ARDB 1032 bool "Support ls2081ardb" 1033 select ARCH_LS2080A 1034 select ARCH_MISC_INIT 1035 select ARM64 1036 select ARMV8_MULTIENTRY 1037 select BOARD_LATE_INIT 1038 select SUPPORT_SPL 1039 help 1040 Support for Freescale LS2081ARDB platform. 1041 The LS2081A Reference design board (RDB) is a high-performance 1042 development platform that supports the QorIQ LS2081A/LS2041A 1043 Layerscape Architecture processor. 1044 1045config TARGET_HIKEY 1046 bool "Support HiKey 96boards Consumer Edition Platform" 1047 select ARM64 1048 select DM 1049 select DM_GPIO 1050 select DM_SERIAL 1051 select OF_CONTROL 1052 select PL01X_SERIAL 1053 select SPECIFY_CONSOLE_INDEX 1054 imply CMD_DM 1055 help 1056 Support for HiKey 96boards platform. It features a HI6220 1057 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1058 1059config TARGET_POPLAR 1060 bool "Support Poplar 96boards Enterprise Edition Platform" 1061 select ARM64 1062 select DM 1063 select DM_SERIAL 1064 select DM_USB 1065 select OF_CONTROL 1066 select PL01X_SERIAL 1067 imply CMD_DM 1068 help 1069 Support for Poplar 96boards EE platform. It features a HI3798cv200 1070 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1071 making it capable of running any commercial set-top solution based on 1072 Linux or Android. 1073 1074config TARGET_LS1012AQDS 1075 bool "Support ls1012aqds" 1076 select ARCH_LS1012A 1077 select ARM64 1078 select BOARD_LATE_INIT 1079 help 1080 Support for Freescale LS1012AQDS platform. 1081 The LS1012A Development System (QDS) is a high-performance 1082 development platform that supports the QorIQ LS1012A 1083 Layerscape Architecture processor. 1084 1085config TARGET_LS1012ARDB 1086 bool "Support ls1012ardb" 1087 select ARCH_LS1012A 1088 select ARM64 1089 select BOARD_LATE_INIT 1090 imply SCSI 1091 imply SCSI_AHCI 1092 help 1093 Support for Freescale LS1012ARDB platform. 1094 The LS1012A Reference design board (RDB) is a high-performance 1095 development platform that supports the QorIQ LS1012A 1096 Layerscape Architecture processor. 1097 1098config TARGET_LS1012A2G5RDB 1099 bool "Support ls1012a2g5rdb" 1100 select ARCH_LS1012A 1101 select ARM64 1102 select BOARD_LATE_INIT 1103 imply SCSI 1104 help 1105 Support for Freescale LS1012A2G5RDB platform. 1106 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1107 development platform that supports the QorIQ LS1012A 1108 Layerscape Architecture processor. 1109 1110config TARGET_LS1012AFRWY 1111 bool "Support ls1012afrwy" 1112 select ARCH_LS1012A 1113 select ARM64 1114 select BOARD_LATE_INIT 1115 imply SCSI 1116 imply SCSI_AHCI 1117 help 1118 Support for Freescale LS1012AFRWY platform. 1119 The LS1012A FRWY board (FRWY) is a high-performance 1120 development platform that supports the QorIQ LS1012A 1121 Layerscape Architecture processor. 1122 1123config TARGET_LS1012AFRDM 1124 bool "Support ls1012afrdm" 1125 select ARCH_LS1012A 1126 select ARM64 1127 help 1128 Support for Freescale LS1012AFRDM platform. 1129 The LS1012A Freedom board (FRDM) is a high-performance 1130 development platform that supports the QorIQ LS1012A 1131 Layerscape Architecture processor. 1132 1133config TARGET_LS1088ARDB 1134 bool "Support ls1088ardb" 1135 select ARCH_LS1088A 1136 select ARCH_MISC_INIT 1137 select ARM64 1138 select ARMV8_MULTIENTRY 1139 select BOARD_LATE_INIT 1140 select SUPPORT_SPL 1141 help 1142 Support for NXP LS1088ARDB platform. 1143 The LS1088A Reference design board (RDB) is a high-performance 1144 development platform that supports the QorIQ LS1088A 1145 Layerscape Architecture processor. 1146 1147config TARGET_LS1021AQDS 1148 bool "Support ls1021aqds" 1149 select ARCH_LS1021A 1150 select ARCH_SUPPORT_PSCI 1151 select BOARD_EARLY_INIT_F 1152 select BOARD_LATE_INIT 1153 select CPU_V7A 1154 select CPU_V7_HAS_NONSEC 1155 select CPU_V7_HAS_VIRT 1156 select LS1_DEEP_SLEEP 1157 select SUPPORT_SPL 1158 select SYS_FSL_DDR 1159 imply SCSI 1160 1161config TARGET_LS1021ATWR 1162 bool "Support ls1021atwr" 1163 select ARCH_LS1021A 1164 select ARCH_SUPPORT_PSCI 1165 select BOARD_EARLY_INIT_F 1166 select BOARD_LATE_INIT 1167 select CPU_V7A 1168 select CPU_V7_HAS_NONSEC 1169 select CPU_V7_HAS_VIRT 1170 select LS1_DEEP_SLEEP 1171 select SUPPORT_SPL 1172 imply SCSI 1173 1174config TARGET_LS1021AIOT 1175 bool "Support ls1021aiot" 1176 select ARCH_LS1021A 1177 select ARCH_SUPPORT_PSCI 1178 select BOARD_LATE_INIT 1179 select CPU_V7A 1180 select CPU_V7_HAS_NONSEC 1181 select CPU_V7_HAS_VIRT 1182 select SUPPORT_SPL 1183 imply SCSI 1184 help 1185 Support for Freescale LS1021AIOT platform. 1186 The LS1021A Freescale board (IOT) is a high-performance 1187 development platform that supports the QorIQ LS1021A 1188 Layerscape Architecture processor. 1189 1190config TARGET_LS1043AQDS 1191 bool "Support ls1043aqds" 1192 select ARCH_LS1043A 1193 select ARM64 1194 select ARMV8_MULTIENTRY 1195 select BOARD_EARLY_INIT_F 1196 select BOARD_LATE_INIT 1197 select SUPPORT_SPL 1198 imply SCSI 1199 help 1200 Support for Freescale LS1043AQDS platform. 1201 1202config TARGET_LS1043ARDB 1203 bool "Support ls1043ardb" 1204 select ARCH_LS1043A 1205 select ARM64 1206 select ARMV8_MULTIENTRY 1207 select BOARD_EARLY_INIT_F 1208 select BOARD_LATE_INIT 1209 select SUPPORT_SPL 1210 imply SCSI 1211 help 1212 Support for Freescale LS1043ARDB platform. 1213 1214config TARGET_LS1046AQDS 1215 bool "Support ls1046aqds" 1216 select ARCH_LS1046A 1217 select ARM64 1218 select ARMV8_MULTIENTRY 1219 select BOARD_EARLY_INIT_F 1220 select BOARD_LATE_INIT 1221 select DM_SPI_FLASH if DM_SPI 1222 select SUPPORT_SPL 1223 imply SCSI 1224 help 1225 Support for Freescale LS1046AQDS platform. 1226 The LS1046A Development System (QDS) is a high-performance 1227 development platform that supports the QorIQ LS1046A 1228 Layerscape Architecture processor. 1229 1230config TARGET_LS1046ARDB 1231 bool "Support ls1046ardb" 1232 select ARCH_LS1046A 1233 select ARM64 1234 select ARMV8_MULTIENTRY 1235 select BOARD_EARLY_INIT_F 1236 select BOARD_LATE_INIT 1237 select DM_SPI_FLASH if DM_SPI 1238 select POWER_MC34VR500 1239 select SUPPORT_SPL 1240 imply SCSI 1241 help 1242 Support for Freescale LS1046ARDB platform. 1243 The LS1046A Reference Design Board (RDB) is a high-performance 1244 development platform that supports the QorIQ LS1046A 1245 Layerscape Architecture processor. 1246 1247config TARGET_H2200 1248 bool "Support h2200" 1249 select CPU_PXA 1250 1251config TARGET_ZIPITZ2 1252 bool "Support zipitz2" 1253 select CPU_PXA 1254 1255config TARGET_COLIBRI_PXA270 1256 bool "Support colibri_pxa270" 1257 select CPU_PXA 1258 1259config ARCH_UNIPHIER 1260 bool "Socionext UniPhier SoCs" 1261 select BOARD_LATE_INIT 1262 select DM 1263 select DM_GPIO 1264 select DM_I2C 1265 select DM_MMC 1266 select DM_RESET 1267 select DM_SERIAL 1268 select DM_USB 1269 select OF_BOARD_SETUP 1270 select OF_CONTROL 1271 select OF_LIBFDT 1272 select PINCTRL 1273 select SPL_BOARD_INIT if SPL 1274 select SPL_DM if SPL 1275 select SPL_LIBCOMMON_SUPPORT if SPL 1276 select SPL_LIBGENERIC_SUPPORT if SPL 1277 select SPL_OF_CONTROL if SPL 1278 select SPL_PINCTRL if SPL 1279 select SUPPORT_SPL 1280 imply CMD_DM 1281 imply DISTRO_DEFAULTS 1282 imply FAT_WRITE 1283 help 1284 Support for UniPhier SoC family developed by Socionext Inc. 1285 (formerly, System LSI Business Division of Panasonic Corporation) 1286 1287config STM32 1288 bool "Support STMicroelectronics STM32 MCU with cortex M" 1289 select CPU_V7M 1290 select DM 1291 select DM_SERIAL 1292 imply CMD_DM 1293 1294config ARCH_STI 1295 bool "Support STMicrolectronics SoCs" 1296 select BLK 1297 select CPU_V7A 1298 select DM 1299 select DM_MMC 1300 select DM_RESET 1301 select DM_SERIAL 1302 imply CMD_DM 1303 help 1304 Support for STMicroelectronics STiH407/10 SoC family. 1305 This SoC is used on Linaro 96Board STiH410-B2260 1306 1307config ARCH_STM32MP 1308 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1309 select ARCH_MISC_INIT 1310 select BOARD_LATE_INIT 1311 select CLK 1312 select DM 1313 select DM_GPIO 1314 select DM_RESET 1315 select DM_SERIAL 1316 select MISC 1317 select OF_CONTROL 1318 select OF_LIBFDT 1319 select PINCTRL 1320 select REGMAP 1321 select SUPPORT_SPL 1322 select SYSCON 1323 select SYSRESET 1324 select SYS_THUMB_BUILD 1325 imply CMD_DM 1326 help 1327 Support for STM32MP SoC family developed by STMicroelectronics, 1328 MPUs based on ARM cortex A core 1329 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1330 BootLoader (FSBL) 1331 1332config ARCH_ROCKCHIP 1333 bool "Support Rockchip SoCs" 1334 select BLK 1335 select DM 1336 select DM_GPIO 1337 select DM_I2C 1338 select DM_MMC 1339 select DM_PWM 1340 select DM_REGULATOR 1341 select DM_SERIAL 1342 select DM_SPI 1343 select DM_SPI_FLASH 1344 select DM_USB if USB 1345 select ENABLE_ARM_SOC_BOOT0_HOOK 1346 select OF_CONTROL 1347 select SPI 1348 select SPL_DM if SPL 1349 select SPL_SYS_MALLOC_SIMPLE if SPL 1350 select SYS_MALLOC_F 1351 select SYS_THUMB_BUILD if !ARM64 1352 imply ADC 1353 imply CMD_DM 1354 imply DISTRO_DEFAULTS 1355 imply FAT_WRITE 1356 imply SARADC_ROCKCHIP 1357 imply SPL_SYSRESET 1358 imply SYS_NS16550 1359 imply TPL_SYSRESET 1360 imply USB_FUNCTION_FASTBOOT 1361 1362config TARGET_THUNDERX_88XX 1363 bool "Support ThunderX 88xx" 1364 select ARM64 1365 select OF_CONTROL 1366 select PL01X_SERIAL 1367 select SYS_CACHE_SHIFT_7 1368 1369config ARCH_ASPEED 1370 bool "Support Aspeed SoCs" 1371 select DM 1372 select OF_CONTROL 1373 imply CMD_DM 1374 1375endchoice 1376 1377config TI_SECURE_DEVICE 1378 bool "HS Device Type Support" 1379 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1380 help 1381 If a high secure (HS) device type is being used, this config 1382 must be set. This option impacts various aspects of the 1383 build system (to create signed boot images that can be 1384 authenticated) and the code. See the doc/README.ti-secure 1385 file for further details. 1386 1387source "arch/arm/mach-aspeed/Kconfig" 1388 1389source "arch/arm/mach-at91/Kconfig" 1390 1391source "arch/arm/mach-bcm283x/Kconfig" 1392 1393source "arch/arm/mach-bcmstb/Kconfig" 1394 1395source "arch/arm/mach-davinci/Kconfig" 1396 1397source "arch/arm/mach-exynos/Kconfig" 1398 1399source "arch/arm/mach-highbank/Kconfig" 1400 1401source "arch/arm/mach-integrator/Kconfig" 1402 1403source "arch/arm/mach-k3/Kconfig" 1404 1405source "arch/arm/mach-keystone/Kconfig" 1406 1407source "arch/arm/mach-kirkwood/Kconfig" 1408 1409source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1410 1411source "arch/arm/mach-mvebu/Kconfig" 1412 1413source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1414 1415source "arch/arm/mach-imx/mx2/Kconfig" 1416 1417source "arch/arm/mach-imx/mx3/Kconfig" 1418 1419source "arch/arm/mach-imx/mx5/Kconfig" 1420 1421source "arch/arm/mach-imx/mx6/Kconfig" 1422 1423source "arch/arm/mach-imx/mx7/Kconfig" 1424 1425source "arch/arm/mach-imx/mx7ulp/Kconfig" 1426 1427source "arch/arm/mach-imx/imx8/Kconfig" 1428 1429source "arch/arm/mach-imx/mx8m/Kconfig" 1430 1431source "arch/arm/mach-imx/mxs/Kconfig" 1432 1433source "arch/arm/mach-omap2/Kconfig" 1434 1435source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1436 1437source "arch/arm/mach-orion5x/Kconfig" 1438 1439source "arch/arm/mach-owl/Kconfig" 1440 1441source "arch/arm/mach-rmobile/Kconfig" 1442 1443source "arch/arm/mach-meson/Kconfig" 1444 1445source "arch/arm/mach-qemu/Kconfig" 1446 1447source "arch/arm/mach-rockchip/Kconfig" 1448 1449source "arch/arm/mach-s5pc1xx/Kconfig" 1450 1451source "arch/arm/mach-snapdragon/Kconfig" 1452 1453source "arch/arm/mach-socfpga/Kconfig" 1454 1455source "arch/arm/mach-sti/Kconfig" 1456 1457source "arch/arm/mach-stm32/Kconfig" 1458 1459source "arch/arm/mach-stm32mp/Kconfig" 1460 1461source "arch/arm/mach-sunxi/Kconfig" 1462 1463source "arch/arm/mach-tegra/Kconfig" 1464 1465source "arch/arm/mach-uniphier/Kconfig" 1466 1467source "arch/arm/cpu/armv7/vf610/Kconfig" 1468 1469source "arch/arm/mach-zynq/Kconfig" 1470 1471source "arch/arm/mach-versal/Kconfig" 1472 1473source "arch/arm/mach-zynqmp-r5/Kconfig" 1474 1475source "arch/arm/cpu/armv7/Kconfig" 1476 1477source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1478 1479source "arch/arm/cpu/armv8/Kconfig" 1480 1481source "arch/arm/mach-imx/Kconfig" 1482 1483source "board/bosch/shc/Kconfig" 1484source "board/CarMediaLab/flea3/Kconfig" 1485source "board/Marvell/aspenite/Kconfig" 1486source "board/Marvell/gplugd/Kconfig" 1487source "board/armadeus/apf27/Kconfig" 1488source "board/armltd/vexpress/Kconfig" 1489source "board/armltd/vexpress64/Kconfig" 1490source "board/broadcom/bcm23550_w1d/Kconfig" 1491source "board/broadcom/bcm28155_ap/Kconfig" 1492source "board/broadcom/bcmcygnus/Kconfig" 1493source "board/broadcom/bcmnsp/Kconfig" 1494source "board/broadcom/bcmns2/Kconfig" 1495source "board/cavium/thunderx/Kconfig" 1496source "board/cirrus/edb93xx/Kconfig" 1497source "board/eets/pdu001/Kconfig" 1498source "board/freescale/ls2080a/Kconfig" 1499source "board/freescale/ls2080aqds/Kconfig" 1500source "board/freescale/ls2080ardb/Kconfig" 1501source "board/freescale/ls1088a/Kconfig" 1502source "board/freescale/ls1021aqds/Kconfig" 1503source "board/freescale/ls1043aqds/Kconfig" 1504source "board/freescale/ls1021atwr/Kconfig" 1505source "board/freescale/ls1021aiot/Kconfig" 1506source "board/freescale/ls1046aqds/Kconfig" 1507source "board/freescale/ls1043ardb/Kconfig" 1508source "board/freescale/ls1046ardb/Kconfig" 1509source "board/freescale/ls1012aqds/Kconfig" 1510source "board/freescale/ls1012ardb/Kconfig" 1511source "board/freescale/ls1012afrdm/Kconfig" 1512source "board/freescale/mx35pdk/Kconfig" 1513source "board/freescale/s32v234evb/Kconfig" 1514source "board/grinn/chiliboard/Kconfig" 1515source "board/gumstix/pepper/Kconfig" 1516source "board/h2200/Kconfig" 1517source "board/hisilicon/hikey/Kconfig" 1518source "board/hisilicon/poplar/Kconfig" 1519source "board/isee/igep003x/Kconfig" 1520source "board/phytec/pcm051/Kconfig" 1521source "board/silica/pengwyn/Kconfig" 1522source "board/spear/spear300/Kconfig" 1523source "board/spear/spear310/Kconfig" 1524source "board/spear/spear320/Kconfig" 1525source "board/spear/spear600/Kconfig" 1526source "board/spear/x600/Kconfig" 1527source "board/st/stv0991/Kconfig" 1528source "board/tcl/sl50/Kconfig" 1529source "board/ucRobotics/bubblegum_96/Kconfig" 1530source "board/birdland/bav335x/Kconfig" 1531source "board/toradex/colibri_pxa270/Kconfig" 1532source "board/vscom/baltos/Kconfig" 1533source "board/woodburn/Kconfig" 1534source "board/xilinx/Kconfig" 1535source "board/xilinx/zynq/Kconfig" 1536source "board/xilinx/zynqmp/Kconfig" 1537source "board/zipitz2/Kconfig" 1538 1539source "arch/arm/Kconfig.debug" 1540 1541endmenu 1542 1543config SPL_LDSCRIPT 1544 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1545 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1546 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1547 1548 1549