1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_845369 101 bool 102 103config ARM_ERRATA_852421 104 bool 105 106config ARM_ERRATA_852423 107 bool 108 109config CPU_ARM720T 110 bool 111 select SYS_CACHE_SHIFT_5 112 113config CPU_ARM920T 114 bool 115 select SYS_CACHE_SHIFT_5 116 117config CPU_ARM926EJS 118 bool 119 select SYS_CACHE_SHIFT_5 120 121config CPU_ARM946ES 122 bool 123 select SYS_CACHE_SHIFT_5 124 125config CPU_ARM1136 126 bool 127 select SYS_CACHE_SHIFT_5 128 129config CPU_ARM1176 130 bool 131 select HAS_VBAR 132 select SYS_CACHE_SHIFT_5 133 134config CPU_V7 135 bool 136 select HAS_VBAR 137 select HAS_THUMB2 138 select SYS_CACHE_SHIFT_6 139 140config CPU_V7M 141 bool 142 select HAS_THUMB2 143 select THUMB2_KERNEL 144 select SYS_CACHE_SHIFT_5 145 146config CPU_PXA 147 bool 148 select SYS_CACHE_SHIFT_5 149 150config CPU_SA1100 151 bool 152 select SYS_CACHE_SHIFT_5 153 154config SYS_CPU 155 default "arm720t" if CPU_ARM720T 156 default "arm920t" if CPU_ARM920T 157 default "arm926ejs" if CPU_ARM926EJS 158 default "arm946es" if CPU_ARM946ES 159 default "arm1136" if CPU_ARM1136 160 default "arm1176" if CPU_ARM1176 161 default "armv7" if CPU_V7 162 default "armv7m" if CPU_V7M 163 default "pxa" if CPU_PXA 164 default "sa1100" if CPU_SA1100 165 default "armv8" if ARM64 166 167config SYS_ARM_ARCH 168 int 169 default 4 if CPU_ARM720T 170 default 4 if CPU_ARM920T 171 default 5 if CPU_ARM926EJS 172 default 5 if CPU_ARM946ES 173 default 6 if CPU_ARM1136 174 default 6 if CPU_ARM1176 175 default 7 if CPU_V7 176 default 7 if CPU_V7M 177 default 5 if CPU_PXA 178 default 4 if CPU_SA1100 179 default 8 if ARM64 180 181config SYS_CACHE_SHIFT_5 182 bool 183 184config SYS_CACHE_SHIFT_6 185 bool 186 187config SYS_CACHE_SHIFT_7 188 bool 189 190config SYS_CACHELINE_SIZE 191 int 192 default 128 if SYS_CACHE_SHIFT_7 193 default 64 if SYS_CACHE_SHIFT_6 194 default 32 if SYS_CACHE_SHIFT_5 195 196config ARM_SMCCC 197 bool "Support for ARM SMC Calling Convention (SMCCC)" 198 depends on CPU_V7 || ARM64 199 select ARM_PSCI_FW 200 help 201 Say Y here if you want to enable ARM SMC Calling Convention. 202 This should be enabled if U-Boot needs to communicate with system 203 firmware (for example, PSCI) according to SMCCC. 204 205config SEMIHOSTING 206 bool "support boot from semihosting" 207 help 208 In emulated environments, semihosting is a way for 209 the hosted environment to call out to the emulator to 210 retrieve files from the host machine. 211 212config SYS_THUMB_BUILD 213 bool "Build U-Boot using the Thumb instruction set" 214 depends on !ARM64 215 help 216 Use this flag to build U-Boot using the Thumb instruction set for 217 ARM architectures. Thumb instruction set provides better code 218 density. For ARM architectures that support Thumb2 this flag will 219 result in Thumb2 code generated by GCC. 220 221config SPL_SYS_THUMB_BUILD 222 bool "Build SPL using the Thumb instruction set" 223 default y if SYS_THUMB_BUILD 224 depends on !ARM64 225 help 226 Use this flag to build SPL using the Thumb instruction set for 227 ARM architectures. Thumb instruction set provides better code 228 density. For ARM architectures that support Thumb2 this flag will 229 result in Thumb2 code generated by GCC. 230 231config SYS_L2CACHE_OFF 232 bool "L2cache off" 233 help 234 If SoC does not support L2CACHE or one do not want to enable 235 L2CACHE, choose this option. 236 237config ENABLE_ARM_SOC_BOOT0_HOOK 238 bool "prepare BOOT0 header" 239 help 240 If the SoC's BOOT0 requires a header area filled with (magic) 241 values, then choose this option, and create a define called 242 ARM_SOC_BOOT0_HOOK which contains the required assembler 243 preprocessor code. 244 245config ARM_CORTEX_CPU_IS_UP 246 bool 247 default n 248 249config USE_ARCH_MEMCPY 250 bool "Use an assembly optimized implementation of memcpy" 251 default y 252 depends on !ARM64 253 help 254 Enable the generation of an optimized version of memcpy. 255 Such implementation may be faster under some conditions 256 but may increase the binary size. 257 258config SPL_USE_ARCH_MEMCPY 259 bool "Use an assembly optimized implementation of memcpy for SPL" 260 default y if USE_ARCH_MEMCPY 261 depends on !ARM64 262 help 263 Enable the generation of an optimized version of memcpy. 264 Such implementation may be faster under some conditions 265 but may increase the binary size. 266 267config USE_ARCH_MEMSET 268 bool "Use an assembly optimized implementation of memset" 269 default y 270 depends on !ARM64 271 help 272 Enable the generation of an optimized version of memset. 273 Such implementation may be faster under some conditions 274 but may increase the binary size. 275 276config SPL_USE_ARCH_MEMSET 277 bool "Use an assembly optimized implementation of memset for SPL" 278 default y if USE_ARCH_MEMSET 279 depends on !ARM64 280 help 281 Enable the generation of an optimized version of memset. 282 Such implementation may be faster under some conditions 283 but may increase the binary size. 284 285config ARM64_SUPPORT_AARCH32 286 bool "ARM64 system support AArch32 execution state" 287 default y if ARM64 && !TARGET_THUNDERX_88XX 288 help 289 This ARM64 system supports AArch32 execution state. 290 291choice 292 prompt "Target select" 293 default TARGET_HIKEY 294 295config ARCH_AT91 296 bool "Atmel AT91" 297 select SPL_BOARD_INIT if SPL 298 299config TARGET_EDB93XX 300 bool "Support edb93xx" 301 select CPU_ARM920T 302 303config TARGET_ASPENITE 304 bool "Support aspenite" 305 select CPU_ARM926EJS 306 307config TARGET_GPLUGD 308 bool "Support gplugd" 309 select CPU_ARM926EJS 310 311config ARCH_DAVINCI 312 bool "TI DaVinci" 313 select CPU_ARM926EJS 314 imply CMD_SAVES 315 help 316 Support for TI's DaVinci platform. 317 318config KIRKWOOD 319 bool "Marvell Kirkwood" 320 select CPU_ARM926EJS 321 select BOARD_EARLY_INIT_F 322 select ARCH_MISC_INIT 323 324config ARCH_MVEBU 325 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 326 select OF_CONTROL 327 select OF_SEPARATE 328 select DM 329 select DM_ETH 330 select DM_SERIAL 331 select DM_SPI 332 select DM_SPI_FLASH 333 334config TARGET_DEVKIT3250 335 bool "Support devkit3250" 336 select CPU_ARM926EJS 337 select SUPPORT_SPL 338 339config TARGET_WORK_92105 340 bool "Support work_92105" 341 select CPU_ARM926EJS 342 select SUPPORT_SPL 343 344config TARGET_MX25PDK 345 bool "Support mx25pdk" 346 select BOARD_LATE_INIT 347 select CPU_ARM926EJS 348 select BOARD_EARLY_INIT_F 349 350config TARGET_ZMX25 351 bool "Support zmx25" 352 select BOARD_LATE_INIT 353 select CPU_ARM926EJS 354 355config TARGET_APF27 356 bool "Support apf27" 357 select CPU_ARM926EJS 358 select SUPPORT_SPL 359 360config TARGET_APX4DEVKIT 361 bool "Support apx4devkit" 362 select CPU_ARM926EJS 363 select SUPPORT_SPL 364 365config TARGET_XFI3 366 bool "Support xfi3" 367 select CPU_ARM926EJS 368 select SUPPORT_SPL 369 370config TARGET_M28EVK 371 bool "Support m28evk" 372 select CPU_ARM926EJS 373 select SUPPORT_SPL 374 375config TARGET_MX23EVK 376 bool "Support mx23evk" 377 select CPU_ARM926EJS 378 select SUPPORT_SPL 379 select BOARD_EARLY_INIT_F 380 381config TARGET_MX28EVK 382 bool "Support mx28evk" 383 select CPU_ARM926EJS 384 select SUPPORT_SPL 385 select BOARD_EARLY_INIT_F 386 387config TARGET_MX23_OLINUXINO 388 bool "Support mx23_olinuxino" 389 select CPU_ARM926EJS 390 select SUPPORT_SPL 391 select BOARD_EARLY_INIT_F 392 393config TARGET_BG0900 394 bool "Support bg0900" 395 select CPU_ARM926EJS 396 select SUPPORT_SPL 397 398config TARGET_SANSA_FUZE_PLUS 399 bool "Support sansa_fuze_plus" 400 select CPU_ARM926EJS 401 select SUPPORT_SPL 402 403config TARGET_SC_SPS_1 404 bool "Support sc_sps_1" 405 select CPU_ARM926EJS 406 select SUPPORT_SPL 407 408config ORION5X 409 bool "Marvell Orion" 410 select CPU_ARM926EJS 411 412config TARGET_SPEAR300 413 bool "Support spear300" 414 select CPU_ARM926EJS 415 select BOARD_EARLY_INIT_F 416 imply CMD_SAVES 417 418config TARGET_SPEAR310 419 bool "Support spear310" 420 select CPU_ARM926EJS 421 select BOARD_EARLY_INIT_F 422 imply CMD_SAVES 423 424config TARGET_SPEAR320 425 bool "Support spear320" 426 select CPU_ARM926EJS 427 select BOARD_EARLY_INIT_F 428 imply CMD_SAVES 429 430config TARGET_SPEAR600 431 bool "Support spear600" 432 select CPU_ARM926EJS 433 select BOARD_EARLY_INIT_F 434 imply CMD_SAVES 435 436config TARGET_STV0991 437 bool "Support stv0991" 438 select CPU_V7 439 select DM 440 select DM_SERIAL 441 select DM_SPI 442 select DM_SPI_FLASH 443 select SPI_FLASH 444 445config TARGET_X600 446 bool "Support x600" 447 select BOARD_LATE_INIT 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_IMX31_PHYCORE 452 bool "Support imx31_phycore_eet" 453 select CPU_ARM1136 454 select BOARD_EARLY_INIT_F 455 456config TARGET_IMX31_PHYCORE_EET 457 bool "Support imx31_phycore_eet" 458 select BOARD_LATE_INIT 459 select CPU_ARM1136 460 select BOARD_EARLY_INIT_F 461 462config TARGET_MX31ADS 463 bool "Support mx31ads" 464 select CPU_ARM1136 465 select BOARD_EARLY_INIT_F 466 467config TARGET_MX31PDK 468 bool "Support mx31pdk" 469 select BOARD_LATE_INIT 470 select CPU_ARM1136 471 select SUPPORT_SPL 472 select BOARD_EARLY_INIT_F 473 474config TARGET_WOODBURN 475 bool "Support woodburn" 476 select CPU_ARM1136 477 478config TARGET_WOODBURN_SD 479 bool "Support woodburn_sd" 480 select CPU_ARM1136 481 select SUPPORT_SPL 482 483config TARGET_FLEA3 484 bool "Support flea3" 485 select CPU_ARM1136 486 487config TARGET_MX35PDK 488 bool "Support mx35pdk" 489 select BOARD_LATE_INIT 490 select CPU_ARM1136 491 492config ARCH_BCM283X 493 bool "Broadcom BCM283X family" 494 select DM 495 select DM_SERIAL 496 select DM_GPIO 497 select OF_CONTROL 498 imply FAT_WRITE 499 500config TARGET_VEXPRESS_CA15_TC2 501 bool "Support vexpress_ca15_tc2" 502 select CPU_V7 503 select CPU_V7_HAS_NONSEC 504 select CPU_V7_HAS_VIRT 505 506config TARGET_VEXPRESS_CA5X2 507 bool "Support vexpress_ca5x2" 508 select CPU_V7 509 510config TARGET_VEXPRESS_CA9X4 511 bool "Support vexpress_ca9x4" 512 select CPU_V7 513 514config TARGET_BCM23550_W1D 515 bool "Support bcm23550_w1d" 516 select CPU_V7 517 imply CRC32_VERIFY 518 imply FAT_WRITE 519 520config TARGET_BCM28155_AP 521 bool "Support bcm28155_ap" 522 select CPU_V7 523 imply CRC32_VERIFY 524 imply FAT_WRITE 525 526config TARGET_BCMCYGNUS 527 bool "Support bcmcygnus" 528 select CPU_V7 529 imply CRC32_VERIFY 530 imply CMD_HASH 531 imply FAT_WRITE 532 imply HASH_VERIFY 533 imply NETDEVICES 534 imply BCM_SF2_ETH 535 imply BCM_SF2_ETH_GMAC 536 537config TARGET_BCMNSP 538 bool "Support bcmnsp" 539 select CPU_V7 540 541config TARGET_BCMNS2 542 bool "Support Broadcom Northstar2" 543 select ARM64 544 help 545 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 546 ARMv8 Cortex-A57 processors targeting a broad range of networking 547 applications 548 549config ARCH_EXYNOS 550 bool "Samsung EXYNOS" 551 select DM 552 select DM_I2C 553 select DM_SPI_FLASH 554 select DM_SERIAL 555 select DM_SPI 556 select DM_GPIO 557 select DM_KEYBOARD 558 imply FAT_WRITE 559 560config ARCH_S5PC1XX 561 bool "Samsung S5PC1XX" 562 select CPU_V7 563 select DM 564 select DM_SERIAL 565 select DM_GPIO 566 select DM_I2C 567 568config ARCH_HIGHBANK 569 bool "Calxeda Highbank" 570 select CPU_V7 571 572config ARCH_INTEGRATOR 573 bool "ARM Ltd. Integrator family" 574 select DM 575 select DM_SERIAL 576 577config ARCH_KEYSTONE 578 bool "TI Keystone" 579 select CPU_V7 580 select SUPPORT_SPL 581 select SYS_THUMB_BUILD 582 select CMD_POWEROFF 583 imply CMD_MTDPARTS 584 imply FIT 585 imply CMD_SAVES 586 587config ARCH_OMAP2PLUS 588 bool "TI OMAP2+" 589 select CPU_V7 590 select SPL_BOARD_INIT if SPL 591 select SPL_STACK_R if SPL 592 select SUPPORT_SPL 593 imply FIT 594 595config ARCH_MESON 596 bool "Amlogic Meson" 597 help 598 Support for the Meson SoC family developed by Amlogic Inc., 599 targeted at media players and tablet computers. We currently 600 support the S905 (GXBaby) 64-bit SoC. 601 602config ARCH_MX7ULP 603 bool "NXP MX7ULP" 604 select CPU_V7 605 select ROM_UNIFIED_SECTIONS 606 607config ARCH_MX7 608 bool "Freescale MX7" 609 select CPU_V7 610 select SYS_FSL_HAS_SEC if SECURE_BOOT 611 select SYS_FSL_SEC_COMPAT_4 612 select SYS_FSL_SEC_LE 613 select BOARD_EARLY_INIT_F 614 select ARCH_MISC_INIT 615 616config ARCH_MX6 617 bool "Freescale MX6" 618 select CPU_V7 619 select SYS_FSL_HAS_SEC if SECURE_BOOT 620 select SYS_FSL_SEC_COMPAT_4 621 select SYS_FSL_SEC_LE 622 select SYS_THUMB_BUILD if SPL 623 624if ARCH_MX6 625config SPL_LDSCRIPT 626 default "arch/arm/mach-omap2/u-boot-spl.lds" 627endif 628 629config ARCH_MX5 630 bool "Freescale MX5" 631 select CPU_V7 632 select BOARD_EARLY_INIT_F 633 634config ARCH_RMOBILE 635 bool "Renesas ARM SoCs" 636 select DM 637 select DM_SERIAL 638 select BOARD_EARLY_INIT_F 639 imply FAT_WRITE 640 imply SYS_THUMB_BUILD 641 642config TARGET_S32V234EVB 643 bool "Support s32v234evb" 644 select ARM64 645 select SYS_FSL_ERRATUM_ESDHC111 646 647config ARCH_SNAPDRAGON 648 bool "Qualcomm Snapdragon SoCs" 649 select ARM64 650 select DM 651 select DM_GPIO 652 select DM_SERIAL 653 select SPMI 654 select OF_CONTROL 655 select OF_SEPARATE 656 657config ARCH_SOCFPGA 658 bool "Altera SOCFPGA family" 659 select CPU_V7 660 select SUPPORT_SPL 661 select OF_CONTROL 662 select SPL_OF_CONTROL 663 select DM 664 select DM_SPI_FLASH 665 select DM_SPI 666 select ENABLE_ARM_SOC_BOOT0_HOOK 667 select ARCH_EARLY_INIT_R 668 select ARCH_MISC_INIT 669 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 670 select SYS_THUMB_BUILD 671 imply CMD_MTDPARTS 672 imply CRC32_VERIFY 673 imply FAT_WRITE 674 675config ARCH_SUNXI 676 bool "Support sunxi (Allwinner) SoCs" 677 select CMD_GPIO 678 select CMD_MMC if MMC 679 select CMD_USB if DISTRO_DEFAULTS 680 select DM 681 select DM_ETH 682 select DM_GPIO 683 select DM_KEYBOARD 684 select DM_SERIAL 685 select DM_USB if DISTRO_DEFAULTS 686 select OF_BOARD_SETUP 687 select OF_CONTROL 688 select OF_SEPARATE 689 select SPL_STACK_R if SPL 690 select SPL_SYS_MALLOC_SIMPLE if SPL 691 select SYS_NS16550 692 select SPL_SYS_THUMB_BUILD if !ARM64 693 select USB if DISTRO_DEFAULTS 694 select USB_STORAGE if DISTRO_DEFAULTS 695 select USB_KEYBOARD if DISTRO_DEFAULTS 696 select USE_TINY_PRINTF 697 imply CMD_GPT 698 imply FAT_WRITE 699 imply PRE_CONSOLE_BUFFER 700 imply SPL_GPIO_SUPPORT 701 imply SPL_LIBCOMMON_SUPPORT 702 imply SPL_LIBDISK_SUPPORT 703 imply SPL_LIBGENERIC_SUPPORT 704 imply SPL_MMC_SUPPORT if MMC 705 imply SPL_POWER_SUPPORT 706 imply SPL_SERIAL_SUPPORT 707 imply USB_GADGET 708 709config TARGET_TS4600 710 bool "Support TS4600" 711 select CPU_ARM926EJS 712 select SUPPORT_SPL 713 714config ARCH_VF610 715 bool "Freescale Vybrid" 716 select CPU_V7 717 select SYS_FSL_ERRATUM_ESDHC111 718 imply CMD_MTDPARTS 719 imply NAND 720 721config ARCH_ZYNQ 722 bool "Xilinx Zynq Platform" 723 select BOARD_LATE_INIT 724 select CPU_V7 725 select SUPPORT_SPL 726 select OF_CONTROL 727 select SPL_BOARD_INIT if SPL 728 select SPL_OF_CONTROL if SPL 729 select DM 730 select DM_ETH 731 select DM_GPIO 732 select SPL_DM if SPL 733 select DM_MMC 734 select DM_SPI 735 select DM_SERIAL 736 select DM_SPI_FLASH 737 select SPL_SEPARATE_BSS if SPL 738 select DM_USB if USB 739 select BLK 740 select CLK 741 select SPL_CLK 742 select CLK_ZYNQ 743 imply CMD_CLK 744 imply FAT_WRITE 745 imply CMD_SPL 746 747config ARCH_ZYNQMP 748 bool "Support Xilinx ZynqMP Platform" 749 select ARM64 750 select BOARD_LATE_INIT 751 select DM 752 select OF_CONTROL 753 select DM_SERIAL 754 select SUPPORT_SPL 755 select CLK 756 select SPL_BOARD_INIT if SPL 757 select SPL_CLK 758 select DM_USB if USB 759 imply FAT_WRITE 760 761config TEGRA 762 bool "NVIDIA Tegra" 763 imply FAT_WRITE 764 765config TARGET_VEXPRESS64_AEMV8A 766 bool "Support vexpress_aemv8a" 767 select ARM64 768 769config TARGET_VEXPRESS64_BASE_FVP 770 bool "Support Versatile Express ARMv8a FVP BASE model" 771 select ARM64 772 select SEMIHOSTING 773 774config TARGET_VEXPRESS64_BASE_FVP_DRAM 775 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 776 select ARM64 777 help 778 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 779 the default config to allow the user to load the images directly into 780 DRAM using model parameters rather than by using semi-hosting to load 781 the files from the host filesystem. 782 783config TARGET_VEXPRESS64_JUNO 784 bool "Support Versatile Express Juno Development Platform" 785 select ARM64 786 787config TARGET_LS2080A_EMU 788 bool "Support ls2080a_emu" 789 select ARCH_LS2080A 790 select ARM64 791 select ARMV8_MULTIENTRY 792 select ARCH_MISC_INIT 793 help 794 Support for Freescale LS2080A_EMU platform 795 The LS2080A Development System (EMULATOR) is a pre silicon 796 development platform that supports the QorIQ LS2080A 797 Layerscape Architecture processor. 798 799config TARGET_LS2080A_SIMU 800 bool "Support ls2080a_simu" 801 select ARCH_LS2080A 802 select ARM64 803 select ARMV8_MULTIENTRY 804 select ARCH_MISC_INIT 805 help 806 Support for Freescale LS2080A_SIMU platform 807 The LS2080A Development System (QDS) is a pre silicon 808 development platform that supports the QorIQ LS2080A 809 Layerscape Architecture processor. 810 811config TARGET_LS1088AQDS 812 bool "Support ls1088aqds" 813 select ARCH_LS1088A 814 select ARM64 815 select ARMV8_MULTIENTRY 816 select ARCH_MISC_INIT 817 select BOARD_LATE_INIT 818 help 819 Support for NXP LS1088AQDS platform 820 The LS1088A Development System (QDS) is a high-performance 821 development platform that supports the QorIQ LS1088A 822 Layerscape Architecture processor. 823 824config TARGET_LS2080AQDS 825 bool "Support ls2080aqds" 826 select ARCH_LS2080A 827 select ARM64 828 select ARMV8_MULTIENTRY 829 select BOARD_LATE_INIT 830 select SUPPORT_SPL 831 select ARCH_MISC_INIT 832 imply SCSI 833 help 834 Support for Freescale LS2080AQDS platform 835 The LS2080A Development System (QDS) is a high-performance 836 development platform that supports the QorIQ LS2080A 837 Layerscape Architecture processor. 838 839config TARGET_LS2080ARDB 840 bool "Support ls2080ardb" 841 select ARCH_LS2080A 842 select ARM64 843 select ARMV8_MULTIENTRY 844 select BOARD_LATE_INIT 845 select SUPPORT_SPL 846 select ARCH_MISC_INIT 847 imply SCSI 848 help 849 Support for Freescale LS2080ARDB platform. 850 The LS2080A Reference design board (RDB) is a high-performance 851 development platform that supports the QorIQ LS2080A 852 Layerscape Architecture processor. 853 854config TARGET_LS2081ARDB 855 bool "Support ls2081ardb" 856 select ARCH_LS2080A 857 select ARM64 858 select ARMV8_MULTIENTRY 859 select BOARD_LATE_INIT 860 select SUPPORT_SPL 861 select ARCH_MISC_INIT 862 help 863 Support for Freescale LS2081ARDB platform. 864 The LS2081A Reference design board (RDB) is a high-performance 865 development platform that supports the QorIQ LS2081A/LS2041A 866 Layerscape Architecture processor. 867 868config TARGET_HIKEY 869 bool "Support HiKey 96boards Consumer Edition Platform" 870 select ARM64 871 select DM 872 select DM_GPIO 873 select DM_SERIAL 874 select OF_CONTROL 875 help 876 Support for HiKey 96boards platform. It features a HI6220 877 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 878 879config TARGET_POPLAR 880 bool "Support Poplar 96boards Enterprise Edition Platform" 881 select ARM64 882 select DM 883 select OF_CONTROL 884 select DM_SERIAL 885 select DM_USB 886 help 887 Support for Poplar 96boards EE platform. It features a HI3798cv200 888 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 889 making it capable of running any commercial set-top solution based on 890 Linux or Android. 891 892config TARGET_LS1012AQDS 893 bool "Support ls1012aqds" 894 select ARCH_LS1012A 895 select ARM64 896 select BOARD_LATE_INIT 897 help 898 Support for Freescale LS1012AQDS platform. 899 The LS1012A Development System (QDS) is a high-performance 900 development platform that supports the QorIQ LS1012A 901 Layerscape Architecture processor. 902 903config TARGET_LS1012ARDB 904 bool "Support ls1012ardb" 905 select ARCH_LS1012A 906 select ARM64 907 select BOARD_LATE_INIT 908 imply SCSI 909 help 910 Support for Freescale LS1012ARDB platform. 911 The LS1012A Reference design board (RDB) is a high-performance 912 development platform that supports the QorIQ LS1012A 913 Layerscape Architecture processor. 914 915config TARGET_LS1012AFRDM 916 bool "Support ls1012afrdm" 917 select ARCH_LS1012A 918 select ARM64 919 help 920 Support for Freescale LS1012AFRDM platform. 921 The LS1012A Freedom board (FRDM) is a high-performance 922 development platform that supports the QorIQ LS1012A 923 Layerscape Architecture processor. 924 925config TARGET_LS1088ARDB 926 bool "Support ls1088ardb" 927 select ARCH_LS1088A 928 select ARM64 929 select ARMV8_MULTIENTRY 930 select ARCH_MISC_INIT 931 select BOARD_LATE_INIT 932 help 933 Support for NXP LS1088ARDB platform. 934 The LS1088A Reference design board (RDB) is a high-performance 935 development platform that supports the QorIQ LS1088A 936 Layerscape Architecture processor. 937 938config TARGET_LS1021AQDS 939 bool "Support ls1021aqds" 940 select BOARD_LATE_INIT 941 select CPU_V7 942 select CPU_V7_HAS_NONSEC 943 select CPU_V7_HAS_VIRT 944 select SUPPORT_SPL 945 select ARCH_LS1021A 946 select ARCH_SUPPORT_PSCI 947 select LS1_DEEP_SLEEP 948 select SYS_FSL_DDR 949 select BOARD_EARLY_INIT_F 950 imply SCSI 951 952config TARGET_LS1021ATWR 953 bool "Support ls1021atwr" 954 select BOARD_LATE_INIT 955 select CPU_V7 956 select CPU_V7_HAS_NONSEC 957 select CPU_V7_HAS_VIRT 958 select SUPPORT_SPL 959 select ARCH_LS1021A 960 select ARCH_SUPPORT_PSCI 961 select LS1_DEEP_SLEEP 962 select BOARD_EARLY_INIT_F 963 imply SCSI 964 965config TARGET_LS1021AIOT 966 bool "Support ls1021aiot" 967 select BOARD_LATE_INIT 968 select CPU_V7 969 select CPU_V7_HAS_NONSEC 970 select CPU_V7_HAS_VIRT 971 select SUPPORT_SPL 972 select ARCH_LS1021A 973 select ARCH_SUPPORT_PSCI 974 imply SCSI 975 help 976 Support for Freescale LS1021AIOT platform. 977 The LS1021A Freescale board (IOT) is a high-performance 978 development platform that supports the QorIQ LS1021A 979 Layerscape Architecture processor. 980 981config TARGET_LS1043AQDS 982 bool "Support ls1043aqds" 983 select ARCH_LS1043A 984 select ARM64 985 select ARMV8_MULTIENTRY 986 select BOARD_LATE_INIT 987 select SUPPORT_SPL 988 select BOARD_EARLY_INIT_F 989 imply SCSI 990 help 991 Support for Freescale LS1043AQDS platform. 992 993config TARGET_LS1043ARDB 994 bool "Support ls1043ardb" 995 select ARCH_LS1043A 996 select ARM64 997 select ARMV8_MULTIENTRY 998 select BOARD_LATE_INIT 999 select SUPPORT_SPL 1000 select BOARD_EARLY_INIT_F 1001 imply SCSI 1002 help 1003 Support for Freescale LS1043ARDB platform. 1004 1005config TARGET_LS1046AQDS 1006 bool "Support ls1046aqds" 1007 select ARCH_LS1046A 1008 select ARM64 1009 select ARMV8_MULTIENTRY 1010 select BOARD_LATE_INIT 1011 select SUPPORT_SPL 1012 select DM_SPI_FLASH if DM_SPI 1013 select BOARD_EARLY_INIT_F 1014 imply SCSI 1015 help 1016 Support for Freescale LS1046AQDS platform. 1017 The LS1046A Development System (QDS) is a high-performance 1018 development platform that supports the QorIQ LS1046A 1019 Layerscape Architecture processor. 1020 1021config TARGET_LS1046ARDB 1022 bool "Support ls1046ardb" 1023 select ARCH_LS1046A 1024 select ARM64 1025 select ARMV8_MULTIENTRY 1026 select BOARD_LATE_INIT 1027 select SUPPORT_SPL 1028 select DM_SPI_FLASH if DM_SPI 1029 select POWER_MC34VR500 1030 select BOARD_EARLY_INIT_F 1031 imply SCSI 1032 help 1033 Support for Freescale LS1046ARDB platform. 1034 The LS1046A Reference Design Board (RDB) is a high-performance 1035 development platform that supports the QorIQ LS1046A 1036 Layerscape Architecture processor. 1037 1038config TARGET_H2200 1039 bool "Support h2200" 1040 select CPU_PXA 1041 1042config TARGET_ZIPITZ2 1043 bool "Support zipitz2" 1044 select CPU_PXA 1045 1046config TARGET_COLIBRI_PXA270 1047 bool "Support colibri_pxa270" 1048 select CPU_PXA 1049 1050config ARCH_UNIPHIER 1051 bool "Socionext UniPhier SoCs" 1052 select BOARD_LATE_INIT 1053 select DM 1054 select DM_GPIO 1055 select DM_I2C 1056 select DM_MMC 1057 select DM_RESET 1058 select DM_SERIAL 1059 select DM_USB 1060 select OF_CONTROL 1061 select OF_LIBFDT 1062 select PINCTRL 1063 select SPL_BOARD_INIT if SPL 1064 select SPL_DM if SPL 1065 select SPL_LIBCOMMON_SUPPORT if SPL 1066 select SPL_LIBGENERIC_SUPPORT if SPL 1067 select SPL_OF_CONTROL if SPL 1068 select SPL_PINCTRL if SPL 1069 select SUPPORT_SPL 1070 imply FAT_WRITE 1071 help 1072 Support for UniPhier SoC family developed by Socionext Inc. 1073 (formerly, System LSI Business Division of Panasonic Corporation) 1074 1075config STM32 1076 bool "Support STM32" 1077 select CPU_V7M 1078 select DM 1079 select DM_SERIAL 1080 select SYS_THUMB_BUILD 1081 1082config ARCH_STI 1083 bool "Support STMicrolectronics SoCs" 1084 select CPU_V7 1085 select DM 1086 select DM_SERIAL 1087 select BLK 1088 select DM_MMC 1089 select DM_RESET 1090 help 1091 Support for STMicroelectronics STiH407/10 SoC family. 1092 This SoC is used on Linaro 96Board STiH410-B2260 1093 1094config ARCH_ROCKCHIP 1095 bool "Support Rockchip SoCs" 1096 select OF_CONTROL 1097 select BLK 1098 select DM 1099 select SPL_DM if SPL 1100 select SYS_MALLOC_F 1101 select SYS_THUMB_BUILD if !ARM64 1102 select SPL_SYS_MALLOC_SIMPLE if SPL 1103 select DM_GPIO 1104 select DM_I2C 1105 select DM_MMC 1106 select DM_SERIAL 1107 select DM_SPI 1108 select DM_SPI_FLASH 1109 select DM_USB if USB 1110 select DM_PWM 1111 select DM_REGULATOR 1112 imply CMD_FASTBOOT 1113 imply FASTBOOT 1114 imply FAT_WRITE 1115 imply USB_FUNCTION_FASTBOOT 1116 imply SPL_SYSRESET 1117 imply TPL_SYSRESET 1118 imply ADC 1119 imply SARADC_ROCKCHIP 1120 1121config TARGET_THUNDERX_88XX 1122 bool "Support ThunderX 88xx" 1123 select ARM64 1124 select OF_CONTROL 1125 select SYS_CACHE_SHIFT_7 1126 1127config ARCH_ASPEED 1128 bool "Support Aspeed SoCs" 1129 select OF_CONTROL 1130 select DM 1131 1132endchoice 1133 1134source "arch/arm/mach-aspeed/Kconfig" 1135 1136source "arch/arm/mach-at91/Kconfig" 1137 1138source "arch/arm/mach-bcm283x/Kconfig" 1139 1140source "arch/arm/mach-davinci/Kconfig" 1141 1142source "arch/arm/mach-exynos/Kconfig" 1143 1144source "arch/arm/mach-highbank/Kconfig" 1145 1146source "arch/arm/mach-integrator/Kconfig" 1147 1148source "arch/arm/mach-keystone/Kconfig" 1149 1150source "arch/arm/mach-kirkwood/Kconfig" 1151 1152source "arch/arm/mach-mvebu/Kconfig" 1153 1154source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1155 1156source "arch/arm/mach-imx/mx7ulp/Kconfig" 1157 1158source "arch/arm/mach-imx/mx7/Kconfig" 1159 1160source "arch/arm/mach-imx/mx6/Kconfig" 1161 1162source "arch/arm/mach-imx/mx5/Kconfig" 1163 1164source "arch/arm/mach-omap2/Kconfig" 1165 1166source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1167 1168source "arch/arm/mach-orion5x/Kconfig" 1169 1170source "arch/arm/mach-rmobile/Kconfig" 1171 1172source "arch/arm/mach-meson/Kconfig" 1173 1174source "arch/arm/mach-rockchip/Kconfig" 1175 1176source "arch/arm/mach-s5pc1xx/Kconfig" 1177 1178source "arch/arm/mach-snapdragon/Kconfig" 1179 1180source "arch/arm/mach-socfpga/Kconfig" 1181 1182source "arch/arm/mach-sti/Kconfig" 1183 1184source "arch/arm/mach-stm32/Kconfig" 1185 1186source "arch/arm/mach-sunxi/Kconfig" 1187 1188source "arch/arm/mach-tegra/Kconfig" 1189 1190source "arch/arm/mach-uniphier/Kconfig" 1191 1192source "arch/arm/cpu/armv7/vf610/Kconfig" 1193 1194source "arch/arm/mach-zynq/Kconfig" 1195 1196source "arch/arm/cpu/armv7/Kconfig" 1197 1198source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1199 1200source "arch/arm/cpu/armv8/Kconfig" 1201 1202source "arch/arm/mach-imx/Kconfig" 1203 1204source "board/aries/m28evk/Kconfig" 1205source "board/bosch/shc/Kconfig" 1206source "board/CarMediaLab/flea3/Kconfig" 1207source "board/Marvell/aspenite/Kconfig" 1208source "board/Marvell/gplugd/Kconfig" 1209source "board/armadeus/apf27/Kconfig" 1210source "board/armltd/vexpress/Kconfig" 1211source "board/armltd/vexpress64/Kconfig" 1212source "board/bluegiga/apx4devkit/Kconfig" 1213source "board/broadcom/bcm23550_w1d/Kconfig" 1214source "board/broadcom/bcm28155_ap/Kconfig" 1215source "board/broadcom/bcmcygnus/Kconfig" 1216source "board/broadcom/bcmnsp/Kconfig" 1217source "board/broadcom/bcmns2/Kconfig" 1218source "board/cavium/thunderx/Kconfig" 1219source "board/cirrus/edb93xx/Kconfig" 1220source "board/creative/xfi3/Kconfig" 1221source "board/freescale/ls2080a/Kconfig" 1222source "board/freescale/ls2080aqds/Kconfig" 1223source "board/freescale/ls2080ardb/Kconfig" 1224source "board/freescale/ls1088a/Kconfig" 1225source "board/freescale/ls1021aqds/Kconfig" 1226source "board/freescale/ls1043aqds/Kconfig" 1227source "board/freescale/ls1021atwr/Kconfig" 1228source "board/freescale/ls1021aiot/Kconfig" 1229source "board/freescale/ls1046aqds/Kconfig" 1230source "board/freescale/ls1043ardb/Kconfig" 1231source "board/freescale/ls1046ardb/Kconfig" 1232source "board/freescale/ls1012aqds/Kconfig" 1233source "board/freescale/ls1012ardb/Kconfig" 1234source "board/freescale/ls1012afrdm/Kconfig" 1235source "board/freescale/mx23evk/Kconfig" 1236source "board/freescale/mx25pdk/Kconfig" 1237source "board/freescale/mx28evk/Kconfig" 1238source "board/freescale/mx31ads/Kconfig" 1239source "board/freescale/mx31pdk/Kconfig" 1240source "board/freescale/mx35pdk/Kconfig" 1241source "board/freescale/s32v234evb/Kconfig" 1242source "board/gdsys/a38x/Kconfig" 1243source "board/grinn/chiliboard/Kconfig" 1244source "board/gumstix/pepper/Kconfig" 1245source "board/h2200/Kconfig" 1246source "board/hisilicon/hikey/Kconfig" 1247source "board/hisilicon/poplar/Kconfig" 1248source "board/imx31_phycore/Kconfig" 1249source "board/isee/igep003x/Kconfig" 1250source "board/olimex/mx23_olinuxino/Kconfig" 1251source "board/phytec/pcm051/Kconfig" 1252source "board/ppcag/bg0900/Kconfig" 1253source "board/sandisk/sansa_fuze_plus/Kconfig" 1254source "board/schulercontrol/sc_sps_1/Kconfig" 1255source "board/silica/pengwyn/Kconfig" 1256source "board/spear/spear300/Kconfig" 1257source "board/spear/spear310/Kconfig" 1258source "board/spear/spear320/Kconfig" 1259source "board/spear/spear600/Kconfig" 1260source "board/spear/x600/Kconfig" 1261source "board/st/stv0991/Kconfig" 1262source "board/syteco/zmx25/Kconfig" 1263source "board/tcl/sl50/Kconfig" 1264source "board/birdland/bav335x/Kconfig" 1265source "board/timll/devkit3250/Kconfig" 1266source "board/toradex/colibri_pxa270/Kconfig" 1267source "board/technologic/ts4600/Kconfig" 1268source "board/vscom/baltos/Kconfig" 1269source "board/woodburn/Kconfig" 1270source "board/work-microwave/work_92105/Kconfig" 1271source "board/zipitz2/Kconfig" 1272 1273source "arch/arm/Kconfig.debug" 1274 1275endmenu 1276 1277config SPL_LDSCRIPT 1278 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 1279 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1280 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1281 1282 1283